Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1363 insertions, 0 deletions

diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c
new file mode 100644
index 000000000..f7126235f
--- /dev/null
+++ b/drivers/iio/light/si1145.c
@@ -0,0 +1,1363 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * si1145.c - Support for Silabs SI1132 and SI1141/2/3/5/6/7 combined ambient
+ * light, UV index and proximity sensors
+ *
+ * Copyright 2014-16 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+ * Copyright 2016 Crestez Dan Leonard <leonard.crestez@intel.com>
+ *
+ * SI1132 (7-bit I2C slave address 0x60)
+ * SI1141/2/3 (7-bit I2C slave address 0x5a)
+ * SI1145/6/6 (7-bit I2C slave address 0x60)
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/buffer.h>
+#include <linux/util_macros.h>
+
+#define SI1145_REG_PART_ID		0x00
+#define SI1145_REG_REV_ID		0x01
+#define SI1145_REG_SEQ_ID		0x02
+#define SI1145_REG_INT_CFG		0x03
+#define SI1145_REG_IRQ_ENABLE		0x04
+#define SI1145_REG_IRQ_MODE		0x05
+#define SI1145_REG_HW_KEY		0x07
+#define SI1145_REG_MEAS_RATE		0x08
+#define SI1145_REG_PS_LED21		0x0f
+#define SI1145_REG_PS_LED3		0x10
+#define SI1145_REG_UCOEF1		0x13
+#define SI1145_REG_UCOEF2		0x14
+#define SI1145_REG_UCOEF3		0x15
+#define SI1145_REG_UCOEF4		0x16
+#define SI1145_REG_PARAM_WR		0x17
+#define SI1145_REG_COMMAND		0x18
+#define SI1145_REG_RESPONSE		0x20
+#define SI1145_REG_IRQ_STATUS		0x21
+#define SI1145_REG_ALSVIS_DATA		0x22
+#define SI1145_REG_ALSIR_DATA		0x24
+#define SI1145_REG_PS1_DATA		0x26
+#define SI1145_REG_PS2_DATA		0x28
+#define SI1145_REG_PS3_DATA		0x2a
+#define SI1145_REG_AUX_DATA		0x2c
+#define SI1145_REG_PARAM_RD		0x2e
+#define SI1145_REG_CHIP_STAT		0x30
+
+#define SI1145_UCOEF1_DEFAULT		0x7b
+#define SI1145_UCOEF2_DEFAULT		0x6b
+#define SI1145_UCOEF3_DEFAULT		0x01
+#define SI1145_UCOEF4_DEFAULT		0x00
+
+/* Helper to figure out PS_LED register / shift per channel */
+#define SI1145_PS_LED_REG(ch) \
+	(((ch) == 2) ? SI1145_REG_PS_LED3 : SI1145_REG_PS_LED21)
+#define SI1145_PS_LED_SHIFT(ch) \
+	(((ch) == 1) ? 4 : 0)
+
+/* Parameter offsets */
+#define SI1145_PARAM_CHLIST		0x01
+#define SI1145_PARAM_PSLED12_SELECT	0x02
+#define SI1145_PARAM_PSLED3_SELECT	0x03
+#define SI1145_PARAM_PS_ENCODING	0x05
+#define SI1145_PARAM_ALS_ENCODING	0x06
+#define SI1145_PARAM_PS1_ADC_MUX	0x07
+#define SI1145_PARAM_PS2_ADC_MUX	0x08
+#define SI1145_PARAM_PS3_ADC_MUX	0x09
+#define SI1145_PARAM_PS_ADC_COUNTER	0x0a
+#define SI1145_PARAM_PS_ADC_GAIN	0x0b
+#define SI1145_PARAM_PS_ADC_MISC	0x0c
+#define SI1145_PARAM_ALS_ADC_MUX	0x0d
+#define SI1145_PARAM_ALSIR_ADC_MUX	0x0e
+#define SI1145_PARAM_AUX_ADC_MUX	0x0f
+#define SI1145_PARAM_ALSVIS_ADC_COUNTER	0x10
+#define SI1145_PARAM_ALSVIS_ADC_GAIN	0x11
+#define SI1145_PARAM_ALSVIS_ADC_MISC	0x12
+#define SI1145_PARAM_LED_RECOVERY	0x1c
+#define SI1145_PARAM_ALSIR_ADC_COUNTER	0x1d
+#define SI1145_PARAM_ALSIR_ADC_GAIN	0x1e
+#define SI1145_PARAM_ALSIR_ADC_MISC	0x1f
+#define SI1145_PARAM_ADC_OFFSET		0x1a
+
+/* Channel enable masks for CHLIST parameter */
+#define SI1145_CHLIST_EN_PS1		BIT(0)
+#define SI1145_CHLIST_EN_PS2		BIT(1)
+#define SI1145_CHLIST_EN_PS3		BIT(2)
+#define SI1145_CHLIST_EN_ALSVIS		BIT(4)
+#define SI1145_CHLIST_EN_ALSIR		BIT(5)
+#define SI1145_CHLIST_EN_AUX		BIT(6)
+#define SI1145_CHLIST_EN_UV		BIT(7)
+
+/* Proximity measurement mode for ADC_MISC parameter */
+#define SI1145_PS_ADC_MODE_NORMAL	BIT(2)
+/* Signal range mask for ADC_MISC parameter */
+#define SI1145_ADC_MISC_RANGE		BIT(5)
+
+/* Commands for REG_COMMAND */
+#define SI1145_CMD_NOP			0x00
+#define SI1145_CMD_RESET		0x01
+#define SI1145_CMD_PS_FORCE		0x05
+#define SI1145_CMD_ALS_FORCE		0x06
+#define SI1145_CMD_PSALS_FORCE		0x07
+#define SI1145_CMD_PS_PAUSE		0x09
+#define SI1145_CMD_ALS_PAUSE		0x0a
+#define SI1145_CMD_PSALS_PAUSE		0x0b
+#define SI1145_CMD_PS_AUTO		0x0d
+#define SI1145_CMD_ALS_AUTO		0x0e
+#define SI1145_CMD_PSALS_AUTO		0x0f
+#define SI1145_CMD_PARAM_QUERY		0x80
+#define SI1145_CMD_PARAM_SET		0xa0
+
+#define SI1145_RSP_INVALID_SETTING	0x80
+#define SI1145_RSP_COUNTER_MASK		0x0F
+
+/* Minimum sleep after each command to ensure it's received */
+#define SI1145_COMMAND_MINSLEEP_MS	5
+/* Return -ETIMEDOUT after this long */
+#define SI1145_COMMAND_TIMEOUT_MS	25
+
+/* Interrupt configuration masks for INT_CFG register */
+#define SI1145_INT_CFG_OE		BIT(0) /* enable interrupt */
+#define SI1145_INT_CFG_MODE		BIT(1) /* auto reset interrupt pin */
+
+/* Interrupt enable masks for IRQ_ENABLE register */
+#define SI1145_MASK_ALL_IE		(BIT(4) | BIT(3) | BIT(2) | BIT(0))
+
+#define SI1145_MUX_TEMP			0x65
+#define SI1145_MUX_VDD			0x75
+
+/* Proximity LED current; see Table 2 in datasheet */
+#define SI1145_LED_CURRENT_45mA		0x04
+
+enum {
+	SI1132,
+	SI1141,
+	SI1142,
+	SI1143,
+	SI1145,
+	SI1146,
+	SI1147,
+};
+
+struct si1145_part_info {
+	u8 part;
+	const struct iio_info *iio_info;
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	unsigned int num_leds;
+	bool uncompressed_meas_rate;
+};
+
+/**
+ * struct si1145_data - si1145 chip state data
+ * @client:	I2C client
+ * @lock:	mutex to protect shared state.
+ * @cmdlock:	Low-level mutex to protect command execution only
+ * @rsp_seq:	Next expected response number or -1 if counter reset required
+ * @scan_mask:	Saved scan mask to avoid duplicate set_chlist
+ * @autonomous: If automatic measurements are active (for buffer support)
+ * @part_info:	Part information
+ * @trig:	Pointer to iio trigger
+ * @meas_rate:	Value of MEAS_RATE register. Only set in HW in auto mode
+ * @buffer:	Used to pack data read from sensor.
+ */
+struct si1145_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	struct mutex cmdlock;
+	int rsp_seq;
+	const struct si1145_part_info *part_info;
+	unsigned long scan_mask;
+	bool autonomous;
+	struct iio_trigger *trig;
+	int meas_rate;
+	/*
+	 * Ensure timestamp will be naturally aligned if present.
+	 * Maximum buffer size (may be only partly used if not all
+	 * channels are enabled):
+	 *   6*2 bytes channels data + 4 bytes alignment +
+	 *   8 bytes timestamp
+	 */
+	u8 buffer[24] __aligned(8);
+};
+
+/*
+ * __si1145_command_reset() - Send CMD_NOP and wait for response 0
+ *
+ * Does not modify data->rsp_seq
+ *
+ * Return: 0 on success and -errno on error.
+ */
+static int __si1145_command_reset(struct si1145_data *data)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long stop_jiffies;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, SI1145_REG_COMMAND,
+						      SI1145_CMD_NOP);
+	if (ret < 0)
+		return ret;
+	msleep(SI1145_COMMAND_MINSLEEP_MS);
+
+	stop_jiffies = jiffies + SI1145_COMMAND_TIMEOUT_MS * HZ / 1000;
+	while (true) {
+		ret = i2c_smbus_read_byte_data(data->client,
+					       SI1145_REG_RESPONSE);
+		if (ret <= 0)
+			return ret;
+		if (time_after(jiffies, stop_jiffies)) {
+			dev_warn(dev, "timeout on reset\n");
+			return -ETIMEDOUT;
+		}
+		msleep(SI1145_COMMAND_MINSLEEP_MS);
+	}
+}
+
+/*
+ * si1145_command() - Execute a command and poll the response register
+ *
+ * All conversion overflows are reported as -EOVERFLOW
+ * INVALID_SETTING is reported as -EINVAL
+ * Timeouts are reported as -ETIMEDOUT
+ *
+ * Return: 0 on success or -errno on failure
+ */
+static int si1145_command(struct si1145_data *data, u8 cmd)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long stop_jiffies;
+	int ret;
+
+	mutex_lock(&data->cmdlock);
+
+	if (data->rsp_seq < 0) {
+		ret = __si1145_command_reset(data);
+		if (ret < 0) {
+			dev_err(dev, "failed to reset command counter, ret=%d\n",
+				ret);
+			goto out;
+		}
+		data->rsp_seq = 0;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client, SI1145_REG_COMMAND, cmd);
+	if (ret) {
+		dev_warn(dev, "failed to write command, ret=%d\n", ret);
+		goto out;
+	}
+	/* Sleep a little to ensure the command is received */
+	msleep(SI1145_COMMAND_MINSLEEP_MS);
+
+	stop_jiffies = jiffies + SI1145_COMMAND_TIMEOUT_MS * HZ / 1000;
+	while (true) {
+		ret = i2c_smbus_read_byte_data(data->client,
+					       SI1145_REG_RESPONSE);
+		if (ret < 0) {
+			dev_warn(dev, "failed to read response, ret=%d\n", ret);
+			break;
+		}
+
+		if ((ret & ~SI1145_RSP_COUNTER_MASK) == 0) {
+			if (ret == data->rsp_seq) {
+				if (time_after(jiffies, stop_jiffies)) {
+					dev_warn(dev, "timeout on command 0x%02x\n",
+						 cmd);
+					ret = -ETIMEDOUT;
+					break;
+				}
+				msleep(SI1145_COMMAND_MINSLEEP_MS);
+				continue;
+			}
+			if (ret == ((data->rsp_seq + 1) &
+				SI1145_RSP_COUNTER_MASK)) {
+				data->rsp_seq = ret;
+				ret = 0;
+				break;
+			}
+			dev_warn(dev, "unexpected response counter %d instead of %d\n",
+				 ret, (data->rsp_seq + 1) &
+					SI1145_RSP_COUNTER_MASK);
+			ret = -EIO;
+		} else {
+			if (ret == SI1145_RSP_INVALID_SETTING) {
+				dev_warn(dev, "INVALID_SETTING error on command 0x%02x\n",
+					 cmd);
+				ret = -EINVAL;
+			} else {
+				/* All overflows are treated identically */
+				dev_dbg(dev, "overflow, ret=%d, cmd=0x%02x\n",
+					ret, cmd);
+				ret = -EOVERFLOW;
+			}
+		}
+
+		/* Force a counter reset next time */
+		data->rsp_seq = -1;
+		break;
+	}
+
+out:
+	mutex_unlock(&data->cmdlock);
+
+	return ret;
+}
+
+static int si1145_param_update(struct si1145_data *data, u8 op, u8 param,
+			       u8 value)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+		SI1145_REG_PARAM_WR, value);
+	if (ret < 0)
+		return ret;
+
+	return si1145_command(data, op | (param & 0x1F));
+}
+
+static int si1145_param_set(struct si1145_data *data, u8 param, u8 value)
+{
+	return si1145_param_update(data, SI1145_CMD_PARAM_SET, param, value);
+}
+
+/* Set param. Returns negative errno or current value */
+static int si1145_param_query(struct si1145_data *data, u8 param)
+{
+	int ret;
+
+	ret = si1145_command(data, SI1145_CMD_PARAM_QUERY | (param & 0x1F));
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_read_byte_data(data->client, SI1145_REG_PARAM_RD);
+}
+
+/* Expand 8 bit compressed value to 16 bit, see Silabs AN498 */
+static u16 si1145_uncompress(u8 x)
+{
+	u16 result = 0;
+	u8 exponent = 0;
+
+	if (x < 8)
+		return 0;
+
+	exponent = (x & 0xf0) >> 4;
+	result = 0x10 | (x & 0x0f);
+
+	if (exponent >= 4)
+		return result << (exponent - 4);
+	return result >> (4 - exponent);
+}
+
+/* Compress 16 bit value to 8 bit, see Silabs AN498 */
+static u8 si1145_compress(u16 x)
+{
+	u32 exponent = 0;
+	u32 significand = 0;
+	u32 tmp = x;
+
+	if (x == 0x0000)
+		return 0x00;
+	if (x == 0x0001)
+		return 0x08;
+
+	while (1) {
+		tmp >>= 1;
+		exponent += 1;
+		if (tmp == 1)
+			break;
+	}
+
+	if (exponent < 5) {
+		significand = x << (4 - exponent);
+		return (exponent << 4) | (significand & 0xF);
+	}
+
+	significand = x >> (exponent - 5);
+	if (significand & 1) {
+		significand += 2;
+		if (significand & 0x0040) {
+			exponent += 1;
+			significand >>= 1;
+		}
+	}
+
+	return (exponent << 4) | ((significand >> 1) & 0xF);
+}
+
+/* Write meas_rate in hardware */
+static int si1145_set_meas_rate(struct si1145_data *data, int interval)
+{
+	if (data->part_info->uncompressed_meas_rate)
+		return i2c_smbus_write_word_data(data->client,
+			SI1145_REG_MEAS_RATE, interval);
+	else
+		return i2c_smbus_write_byte_data(data->client,
+			SI1145_REG_MEAS_RATE, interval);
+}
+
+static int si1145_read_samp_freq(struct si1145_data *data, int *val, int *val2)
+{
+	*val = 32000;
+	if (data->part_info->uncompressed_meas_rate)
+		*val2 = data->meas_rate;
+	else
+		*val2 = si1145_uncompress(data->meas_rate);
+	return IIO_VAL_FRACTIONAL;
+}
+
+/* Set the samp freq in driver private data */
+static int si1145_store_samp_freq(struct si1145_data *data, int val)
+{
+	int ret = 0;
+	int meas_rate;
+
+	if (val <= 0 || val > 32000)
+		return -ERANGE;
+	meas_rate = 32000 / val;
+
+	mutex_lock(&data->lock);
+	if (data->autonomous) {
+		ret = si1145_set_meas_rate(data, meas_rate);
+		if (ret)
+			goto out;
+	}
+	if (data->part_info->uncompressed_meas_rate)
+		data->meas_rate = meas_rate;
+	else
+		data->meas_rate = si1145_compress(meas_rate);
+
+out:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static irqreturn_t si1145_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct si1145_data *data = iio_priv(indio_dev);
+	int i, j = 0;
+	int ret;
+	u8 irq_status = 0;
+
+	if (!data->autonomous) {
+		ret = si1145_command(data, SI1145_CMD_PSALS_FORCE);
+		if (ret < 0 && ret != -EOVERFLOW)
+			goto done;
+	} else {
+		irq_status = ret = i2c_smbus_read_byte_data(data->client,
+				SI1145_REG_IRQ_STATUS);
+		if (ret < 0)
+			goto done;
+		if (!(irq_status & SI1145_MASK_ALL_IE))
+			goto done;
+	}
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		int run = 1;
+
+		while (i + run < indio_dev->masklength) {
+			if (!test_bit(i + run, indio_dev->active_scan_mask))
+				break;
+			if (indio_dev->channels[i + run].address !=
+				indio_dev->channels[i].address + 2 * run)
+				break;
+			run++;
+		}
+
+		ret = i2c_smbus_read_i2c_block_data_or_emulated(
+				data->client, indio_dev->channels[i].address,
+				sizeof(u16) * run, &data->buffer[j]);
+		if (ret < 0)
+			goto done;
+		j += run * sizeof(u16);
+		i += run - 1;
+	}
+
+	if (data->autonomous) {
+		ret = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_IRQ_STATUS,
+				irq_status & SI1145_MASK_ALL_IE);
+		if (ret < 0)
+			goto done;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+		iio_get_time_ns(indio_dev));
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int si1145_set_chlist(struct iio_dev *indio_dev, unsigned long scan_mask)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	u8 reg = 0, mux;
+	int ret;
+	int i;
+
+	/* channel list already set, no need to reprogram */
+	if (data->scan_mask == scan_mask)
+		return 0;
+
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		switch (indio_dev->channels[i].address) {
+		case SI1145_REG_ALSVIS_DATA:
+			reg |= SI1145_CHLIST_EN_ALSVIS;
+			break;
+		case SI1145_REG_ALSIR_DATA:
+			reg |= SI1145_CHLIST_EN_ALSIR;
+			break;
+		case SI1145_REG_PS1_DATA:
+			reg |= SI1145_CHLIST_EN_PS1;
+			break;
+		case SI1145_REG_PS2_DATA:
+			reg |= SI1145_CHLIST_EN_PS2;
+			break;
+		case SI1145_REG_PS3_DATA:
+			reg |= SI1145_CHLIST_EN_PS3;
+			break;
+		case SI1145_REG_AUX_DATA:
+			switch (indio_dev->channels[i].type) {
+			case IIO_UVINDEX:
+				reg |= SI1145_CHLIST_EN_UV;
+				break;
+			default:
+				reg |= SI1145_CHLIST_EN_AUX;
+				if (indio_dev->channels[i].type == IIO_TEMP)
+					mux = SI1145_MUX_TEMP;
+				else
+					mux = SI1145_MUX_VDD;
+				ret = si1145_param_set(data,
+					SI1145_PARAM_AUX_ADC_MUX, mux);
+				if (ret < 0)
+					return ret;
+
+				break;
+			}
+		}
+	}
+
+	data->scan_mask = scan_mask;
+	ret = si1145_param_set(data, SI1145_PARAM_CHLIST, reg);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int si1145_measure(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	u8 cmd;
+	int ret;
+
+	ret = si1145_set_chlist(indio_dev, BIT(chan->scan_index));
+	if (ret < 0)
+		return ret;
+
+	cmd = (chan->type == IIO_PROXIMITY) ? SI1145_CMD_PS_FORCE :
+		SI1145_CMD_ALS_FORCE;
+	ret = si1145_command(data, cmd);
+	if (ret < 0 && ret != -EOVERFLOW)
+		return ret;
+
+	return i2c_smbus_read_word_data(data->client, chan->address);
+}
+
+/*
+ * Conversion between iio scale and ADC_GAIN values
+ * These could be further adjusted but proximity/intensity are dimensionless
+ */
+static const int si1145_proximity_scale_available[] = {
+	128, 64, 32, 16, 8, 4};
+static const int si1145_intensity_scale_available[] = {
+	128, 64, 32, 16, 8, 4, 2, 1};
+static IIO_CONST_ATTR(in_proximity_scale_available,
+	"128 64 32 16 8 4");
+static IIO_CONST_ATTR(in_intensity_scale_available,
+	"128 64 32 16 8 4 2 1");
+static IIO_CONST_ATTR(in_intensity_ir_scale_available,
+	"128 64 32 16 8 4 2 1");
+
+static int si1145_scale_from_adcgain(int regval)
+{
+	return 128 >> regval;
+}
+
+static int si1145_proximity_adcgain_from_scale(int val, int val2)
+{
+	val = find_closest_descending(val, si1145_proximity_scale_available,
+				ARRAY_SIZE(si1145_proximity_scale_available));
+	if (val < 0 || val > 5 || val2 != 0)
+		return -EINVAL;
+
+	return val;
+}
+
+static int si1145_intensity_adcgain_from_scale(int val, int val2)
+{
+	val = find_closest_descending(val, si1145_intensity_scale_available,
+				ARRAY_SIZE(si1145_intensity_scale_available));
+	if (val < 0 || val > 7 || val2 != 0)
+		return -EINVAL;
+
+	return val;
+}
+
+static int si1145_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	int ret;
+	u8 reg;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_PROXIMITY:
+		case IIO_VOLTAGE:
+		case IIO_TEMP:
+		case IIO_UVINDEX:
+			ret = iio_device_claim_direct_mode(indio_dev);
+			if (ret)
+				return ret;
+			ret = si1145_measure(indio_dev, chan);
+			iio_device_release_direct_mode(indio_dev);
+
+			if (ret < 0)
+				return ret;
+
+			*val = ret;
+
+			return IIO_VAL_INT;
+		case IIO_CURRENT:
+			ret = i2c_smbus_read_byte_data(data->client,
+				SI1145_PS_LED_REG(chan->channel));
+			if (ret < 0)
+				return ret;
+
+			*val = (ret >> SI1145_PS_LED_SHIFT(chan->channel))
+				& 0x0f;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			reg = SI1145_PARAM_PS_ADC_GAIN;
+			break;
+		case IIO_INTENSITY:
+			if (chan->channel2 == IIO_MOD_LIGHT_IR)
+				reg = SI1145_PARAM_ALSIR_ADC_GAIN;
+			else
+				reg = SI1145_PARAM_ALSVIS_ADC_GAIN;
+			break;
+		case IIO_TEMP:
+			*val = 28;
+			*val2 = 571429;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_UVINDEX:
+			*val = 0;
+			*val2 = 10000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+
+		ret = si1145_param_query(data, reg);
+		if (ret < 0)
+			return ret;
+
+		*val = si1145_scale_from_adcgain(ret & 0x07);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/*
+			 * -ADC offset - ADC counts @ 25°C -
+			 *   35 * ADC counts / °C
+			 */
+			*val = -256 - 11136 + 25 * 35;
+			return IIO_VAL_INT;
+		default:
+			/*
+			 * All ADC measurements have are by default offset
+			 * by -256
+			 * See AN498 5.6.3
+			 */
+			ret = si1145_param_query(data, SI1145_PARAM_ADC_OFFSET);
+			if (ret < 0)
+				return ret;
+			*val = -si1145_uncompress(ret);
+			return IIO_VAL_INT;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return si1145_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int si1145_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	u8 reg1, reg2, shift;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			val = si1145_proximity_adcgain_from_scale(val, val2);
+			if (val < 0)
+				return val;
+			reg1 = SI1145_PARAM_PS_ADC_GAIN;
+			reg2 = SI1145_PARAM_PS_ADC_COUNTER;
+			break;
+		case IIO_INTENSITY:
+			val = si1145_intensity_adcgain_from_scale(val, val2);
+			if (val < 0)
+				return val;
+			if (chan->channel2 == IIO_MOD_LIGHT_IR) {
+				reg1 = SI1145_PARAM_ALSIR_ADC_GAIN;
+				reg2 = SI1145_PARAM_ALSIR_ADC_COUNTER;
+			} else {
+				reg1 = SI1145_PARAM_ALSVIS_ADC_GAIN;
+				reg2 = SI1145_PARAM_ALSVIS_ADC_COUNTER;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = si1145_param_set(data, reg1, val);
+		if (ret < 0) {
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+		/* Set recovery period to one's complement of gain */
+		ret = si1145_param_set(data, reg2, (~val & 0x07) << 4);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type != IIO_CURRENT)
+			return -EINVAL;
+
+		if (val < 0 || val > 15 || val2 != 0)
+			return -EINVAL;
+
+		reg1 = SI1145_PS_LED_REG(chan->channel);
+		shift = SI1145_PS_LED_SHIFT(chan->channel);
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = i2c_smbus_read_byte_data(data->client, reg1);
+		if (ret < 0) {
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+		ret = i2c_smbus_write_byte_data(data->client, reg1,
+			(ret & ~(0x0f << shift)) |
+			((val & 0x0f) << shift));
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return si1145_store_samp_freq(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+#define SI1145_ST { \
+	.sign = 'u', \
+	.realbits = 16, \
+	.storagebits = 16, \
+	.endianness = IIO_LE, \
+}
+
+#define SI1145_INTENSITY_CHANNEL(_si) { \
+	.type = IIO_INTENSITY, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_OFFSET) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_ALSVIS_DATA, \
+}
+
+#define SI1145_INTENSITY_IR_CHANNEL(_si) { \
+	.type = IIO_INTENSITY, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_OFFSET) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.modified = 1, \
+	.channel2 = IIO_MOD_LIGHT_IR, \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_ALSIR_DATA, \
+}
+
+#define SI1145_TEMP_CHANNEL(_si) { \
+	.type = IIO_TEMP, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_OFFSET) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_AUX_DATA, \
+}
+
+#define SI1145_UV_CHANNEL(_si) { \
+	.type = IIO_UVINDEX, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_AUX_DATA, \
+}
+
+#define SI1145_PROXIMITY_CHANNEL(_si, _ch) { \
+	.type = IIO_PROXIMITY, \
+	.indexed = 1, \
+	.channel = _ch, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+				    BIT(IIO_CHAN_INFO_OFFSET), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_PS1_DATA + _ch * 2, \
+}
+
+#define SI1145_VOLTAGE_CHANNEL(_si) { \
+	.type = IIO_VOLTAGE, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_type = SI1145_ST, \
+	.scan_index = _si, \
+	.address = SI1145_REG_AUX_DATA, \
+}
+
+#define SI1145_CURRENT_CHANNEL(_ch) { \
+	.type = IIO_CURRENT, \
+	.indexed = 1, \
+	.channel = _ch, \
+	.output = 1, \
+	.scan_index = -1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+}
+
+static const struct iio_chan_spec si1132_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_TEMP_CHANNEL(2),
+	SI1145_VOLTAGE_CHANNEL(3),
+	SI1145_UV_CHANNEL(4),
+	IIO_CHAN_SOFT_TIMESTAMP(6),
+};
+
+static const struct iio_chan_spec si1141_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_PROXIMITY_CHANNEL(2, 0),
+	SI1145_TEMP_CHANNEL(3),
+	SI1145_VOLTAGE_CHANNEL(4),
+	IIO_CHAN_SOFT_TIMESTAMP(5),
+	SI1145_CURRENT_CHANNEL(0),
+};
+
+static const struct iio_chan_spec si1142_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_PROXIMITY_CHANNEL(2, 0),
+	SI1145_PROXIMITY_CHANNEL(3, 1),
+	SI1145_TEMP_CHANNEL(4),
+	SI1145_VOLTAGE_CHANNEL(5),
+	IIO_CHAN_SOFT_TIMESTAMP(6),
+	SI1145_CURRENT_CHANNEL(0),
+	SI1145_CURRENT_CHANNEL(1),
+};
+
+static const struct iio_chan_spec si1143_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_PROXIMITY_CHANNEL(2, 0),
+	SI1145_PROXIMITY_CHANNEL(3, 1),
+	SI1145_PROXIMITY_CHANNEL(4, 2),
+	SI1145_TEMP_CHANNEL(5),
+	SI1145_VOLTAGE_CHANNEL(6),
+	IIO_CHAN_SOFT_TIMESTAMP(7),
+	SI1145_CURRENT_CHANNEL(0),
+	SI1145_CURRENT_CHANNEL(1),
+	SI1145_CURRENT_CHANNEL(2),
+};
+
+static const struct iio_chan_spec si1145_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_PROXIMITY_CHANNEL(2, 0),
+	SI1145_TEMP_CHANNEL(3),
+	SI1145_VOLTAGE_CHANNEL(4),
+	SI1145_UV_CHANNEL(5),
+	IIO_CHAN_SOFT_TIMESTAMP(6),
+	SI1145_CURRENT_CHANNEL(0),
+};
+
+static const struct iio_chan_spec si1146_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_TEMP_CHANNEL(2),
+	SI1145_VOLTAGE_CHANNEL(3),
+	SI1145_UV_CHANNEL(4),
+	SI1145_PROXIMITY_CHANNEL(5, 0),
+	SI1145_PROXIMITY_CHANNEL(6, 1),
+	IIO_CHAN_SOFT_TIMESTAMP(7),
+	SI1145_CURRENT_CHANNEL(0),
+	SI1145_CURRENT_CHANNEL(1),
+};
+
+static const struct iio_chan_spec si1147_channels[] = {
+	SI1145_INTENSITY_CHANNEL(0),
+	SI1145_INTENSITY_IR_CHANNEL(1),
+	SI1145_PROXIMITY_CHANNEL(2, 0),
+	SI1145_PROXIMITY_CHANNEL(3, 1),
+	SI1145_PROXIMITY_CHANNEL(4, 2),
+	SI1145_TEMP_CHANNEL(5),
+	SI1145_VOLTAGE_CHANNEL(6),
+	SI1145_UV_CHANNEL(7),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	SI1145_CURRENT_CHANNEL(0),
+	SI1145_CURRENT_CHANNEL(1),
+	SI1145_CURRENT_CHANNEL(2),
+};
+
+static struct attribute *si1132_attributes[] = {
+	&iio_const_attr_in_intensity_scale_available.dev_attr.attr,
+	&iio_const_attr_in_intensity_ir_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute *si114x_attributes[] = {
+	&iio_const_attr_in_intensity_scale_available.dev_attr.attr,
+	&iio_const_attr_in_intensity_ir_scale_available.dev_attr.attr,
+	&iio_const_attr_in_proximity_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group si1132_attribute_group = {
+	.attrs = si1132_attributes,
+};
+
+static const struct attribute_group si114x_attribute_group = {
+	.attrs = si114x_attributes,
+};
+
+
+static const struct iio_info si1132_info = {
+	.read_raw = si1145_read_raw,
+	.write_raw = si1145_write_raw,
+	.attrs = &si1132_attribute_group,
+};
+
+static const struct iio_info si114x_info = {
+	.read_raw = si1145_read_raw,
+	.write_raw = si1145_write_raw,
+	.attrs = &si114x_attribute_group,
+};
+
+#define SI1145_PART(id, iio_info, chans, leds, uncompressed_meas_rate) \
+	{id, iio_info, chans, ARRAY_SIZE(chans), leds, uncompressed_meas_rate}
+
+static const struct si1145_part_info si1145_part_info[] = {
+	[SI1132] = SI1145_PART(0x32, &si1132_info, si1132_channels, 0, true),
+	[SI1141] = SI1145_PART(0x41, &si114x_info, si1141_channels, 1, false),
+	[SI1142] = SI1145_PART(0x42, &si114x_info, si1142_channels, 2, false),
+	[SI1143] = SI1145_PART(0x43, &si114x_info, si1143_channels, 3, false),
+	[SI1145] = SI1145_PART(0x45, &si114x_info, si1145_channels, 1, true),
+	[SI1146] = SI1145_PART(0x46, &si114x_info, si1146_channels, 2, true),
+	[SI1147] = SI1145_PART(0x47, &si114x_info, si1147_channels, 3, true),
+};
+
+static int si1145_initialize(struct si1145_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, SI1145_REG_COMMAND,
+					SI1145_CMD_RESET);
+	if (ret < 0)
+		return ret;
+	msleep(SI1145_COMMAND_TIMEOUT_MS);
+
+	/* Hardware key, magic value */
+	ret = i2c_smbus_write_byte_data(client, SI1145_REG_HW_KEY, 0x17);
+	if (ret < 0)
+		return ret;
+	msleep(SI1145_COMMAND_TIMEOUT_MS);
+
+	/* Turn off autonomous mode */
+	ret = si1145_set_meas_rate(data, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize sampling freq to 10 Hz */
+	ret = si1145_store_samp_freq(data, 10);
+	if (ret < 0)
+		return ret;
+
+	/* Set LED currents to 45 mA; have 4 bits, see Table 2 in datasheet */
+	switch (data->part_info->num_leds) {
+	case 3:
+		ret = i2c_smbus_write_byte_data(client,
+						SI1145_REG_PS_LED3,
+						SI1145_LED_CURRENT_45mA);
+		if (ret < 0)
+			return ret;
+		fallthrough;
+	case 2:
+		ret = i2c_smbus_write_byte_data(client,
+						SI1145_REG_PS_LED21,
+						(SI1145_LED_CURRENT_45mA << 4) |
+						SI1145_LED_CURRENT_45mA);
+		break;
+	case 1:
+		ret = i2c_smbus_write_byte_data(client,
+						SI1145_REG_PS_LED21,
+						SI1145_LED_CURRENT_45mA);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+	if (ret < 0)
+		return ret;
+
+	/* Set normal proximity measurement mode */
+	ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_MISC,
+			       SI1145_PS_ADC_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_GAIN, 0x01);
+	if (ret < 0)
+		return ret;
+
+	/* ADC_COUNTER should be one complement of ADC_GAIN */
+	ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_COUNTER, 0x06 << 4);
+	if (ret < 0)
+		return ret;
+
+	/* Set ALS visible measurement mode */
+	ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_MISC,
+			       SI1145_ADC_MISC_RANGE);
+	if (ret < 0)
+		return ret;
+
+	ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_GAIN, 0x03);
+	if (ret < 0)
+		return ret;
+
+	ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_COUNTER,
+			       0x04 << 4);
+	if (ret < 0)
+		return ret;
+
+	/* Set ALS IR measurement mode */
+	ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_MISC,
+			       SI1145_ADC_MISC_RANGE);
+	if (ret < 0)
+		return ret;
+
+	ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_GAIN, 0x01);
+	if (ret < 0)
+		return ret;
+
+	ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_COUNTER,
+			       0x06 << 4);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Initialize UCOEF to default values in datasheet
+	 * These registers are normally zero on reset
+	 */
+	if (data->part_info == &si1145_part_info[SI1132] ||
+		data->part_info == &si1145_part_info[SI1145] ||
+		data->part_info == &si1145_part_info[SI1146] ||
+		data->part_info == &si1145_part_info[SI1147]) {
+		ret = i2c_smbus_write_byte_data(data->client,
+						SI1145_REG_UCOEF1,
+						SI1145_UCOEF1_DEFAULT);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_UCOEF2, SI1145_UCOEF2_DEFAULT);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_UCOEF3, SI1145_UCOEF3_DEFAULT);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_UCOEF4, SI1145_UCOEF4_DEFAULT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Program the channels we want to measure with CMD_PSALS_AUTO. No need for
+ * _postdisable as we stop with CMD_PSALS_PAUSE; single measurement (direct)
+ * mode reprograms the channels list anyway...
+ */
+static int si1145_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = si1145_set_chlist(indio_dev, *indio_dev->active_scan_mask);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static bool si1145_validate_scan_mask(struct iio_dev *indio_dev,
+			       const unsigned long *scan_mask)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	unsigned int count = 0;
+	int i;
+
+	/* Check that at most one AUX channel is enabled */
+	for_each_set_bit(i, scan_mask, data->part_info->num_channels) {
+		if (indio_dev->channels[i].address == SI1145_REG_AUX_DATA)
+			count++;
+	}
+
+	return count <= 1;
+}
+
+static const struct iio_buffer_setup_ops si1145_buffer_setup_ops = {
+	.preenable = si1145_buffer_preenable,
+	.validate_scan_mask = si1145_validate_scan_mask,
+};
+
+/*
+ * si1145_trigger_set_state() - Set trigger state
+ *
+ * When not using triggers interrupts are disabled and measurement rate is
+ * set to zero in order to minimize power consumption.
+ */
+static int si1145_trigger_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct si1145_data *data = iio_priv(indio_dev);
+	int err = 0, ret;
+
+	mutex_lock(&data->lock);
+
+	if (state) {
+		data->autonomous = true;
+		err = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_INT_CFG, SI1145_INT_CFG_OE);
+		if (err < 0)
+			goto disable;
+		err = i2c_smbus_write_byte_data(data->client,
+				SI1145_REG_IRQ_ENABLE, SI1145_MASK_ALL_IE);
+		if (err < 0)
+			goto disable;
+		err = si1145_set_meas_rate(data, data->meas_rate);
+		if (err < 0)
+			goto disable;
+		err = si1145_command(data, SI1145_CMD_PSALS_AUTO);
+		if (err < 0)
+			goto disable;
+	} else {
+disable:
+		/* Disable as much as possible skipping errors */
+		ret = si1145_command(data, SI1145_CMD_PSALS_PAUSE);
+		if (ret < 0 && !err)
+			err = ret;
+		ret = si1145_set_meas_rate(data, 0);
+		if (ret < 0 && !err)
+			err = ret;
+		ret = i2c_smbus_write_byte_data(data->client,
+						SI1145_REG_IRQ_ENABLE, 0);
+		if (ret < 0 && !err)
+			err = ret;
+		ret = i2c_smbus_write_byte_data(data->client,
+						SI1145_REG_INT_CFG, 0);
+		if (ret < 0 && !err)
+			err = ret;
+		data->autonomous = false;
+	}
+
+	mutex_unlock(&data->lock);
+	return err;
+}
+
+static const struct iio_trigger_ops si1145_trigger_ops = {
+	.set_trigger_state = si1145_trigger_set_state,
+};
+
+static int si1145_probe_trigger(struct iio_dev *indio_dev)
+{
+	struct si1145_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = devm_iio_trigger_alloc(&client->dev,
+			"%s-dev%d", indio_dev->name, iio_device_id(indio_dev));
+	if (!trig)
+		return -ENOMEM;
+
+	trig->ops = &si1145_trigger_ops;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	ret = devm_request_irq(&client->dev, client->irq,
+			  iio_trigger_generic_data_rdy_poll,
+			  IRQF_TRIGGER_FALLING,
+			  "si1145_irq",
+			  trig);
+	if (ret < 0) {
+		dev_err(&client->dev, "irq request failed\n");
+		return ret;
+	}
+
+	ret = devm_iio_trigger_register(&client->dev, trig);
+	if (ret)
+		return ret;
+
+	data->trig = trig;
+	indio_dev->trig = iio_trigger_get(data->trig);
+
+	return 0;
+}
+
+static int si1145_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct si1145_data *data;
+	struct iio_dev *indio_dev;
+	u8 part_id, rev_id, seq_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->part_info = &si1145_part_info[id->driver_data];
+
+	part_id = ret = i2c_smbus_read_byte_data(data->client,
+						 SI1145_REG_PART_ID);
+	if (ret < 0)
+		return ret;
+	rev_id = ret = i2c_smbus_read_byte_data(data->client,
+						SI1145_REG_REV_ID);
+	if (ret < 0)
+		return ret;
+	seq_id = ret = i2c_smbus_read_byte_data(data->client,
+						SI1145_REG_SEQ_ID);
+	if (ret < 0)
+		return ret;
+	dev_info(&client->dev, "device ID part 0x%02x rev 0x%02x seq 0x%02x\n",
+			part_id, rev_id, seq_id);
+	if (part_id != data->part_info->part) {
+		dev_err(&client->dev, "part ID mismatch got 0x%02x, expected 0x%02x\n",
+				part_id, data->part_info->part);
+		return -ENODEV;
+	}
+
+	indio_dev->name = id->name;
+	indio_dev->channels = data->part_info->channels;
+	indio_dev->num_channels = data->part_info->num_channels;
+	indio_dev->info = data->part_info->iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	mutex_init(&data->lock);
+	mutex_init(&data->cmdlock);
+
+	ret = si1145_initialize(data);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev,
+		indio_dev, NULL,
+		si1145_trigger_handler, &si1145_buffer_setup_ops);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq) {
+		ret = si1145_probe_trigger(indio_dev);
+		if (ret < 0)
+			return ret;
+	} else {
+		dev_info(&client->dev, "no irq, using polling\n");
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id si1145_ids[] = {
+	{ "si1132", SI1132 },
+	{ "si1141", SI1141 },
+	{ "si1142", SI1142 },
+	{ "si1143", SI1143 },
+	{ "si1145", SI1145 },
+	{ "si1146", SI1146 },
+	{ "si1147", SI1147 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si1145_ids);
+
+static struct i2c_driver si1145_driver = {
+	.driver = {
+		.name   = "si1145",
+	},
+	.probe_new = si1145_probe,
+	.id_table = si1145_ids,
+};
+
+module_i2c_driver(si1145_driver);
+
+MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Silabs SI1132 and SI1141/2/3/5/6/7 proximity, ambient light and UV index sensor driver");
+MODULE_LICENSE("GPL");