Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 229 insertions, 0 deletions

diff --git a/drivers/iio/potentiometer/ad5272.c b/drivers/iio/potentiometer/ad5272.c
new file mode 100644
index 000000000..aa140d632
--- /dev/null
+++ b/drivers/iio/potentiometer/ad5272.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Analog Devices AD5272 digital potentiometer driver
+ * Copyright (C) 2018 Phil Reid <preid@electromag.com.au>
+ *
+ * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5272_5274.pdf
+ *
+ * DEVID	#Wipers	#Positions	Resistor Opts (kOhm)	i2c address
+ * ad5272	1	1024		20, 50, 100		01011xx
+ * ad5274	1	256		20, 100			01011xx
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+
+#define  AD5272_RDAC_WR  1
+#define  AD5272_RDAC_RD  2
+#define  AD5272_RESET    4
+#define  AD5272_CTL      7
+
+#define  AD5272_RDAC_WR_EN  BIT(1)
+
+struct ad5272_cfg {
+	int max_pos;
+	int kohms;
+	int shift;
+};
+
+enum ad5272_type {
+	AD5272_020,
+	AD5272_050,
+	AD5272_100,
+	AD5274_020,
+	AD5274_100,
+};
+
+static const struct ad5272_cfg ad5272_cfg[] = {
+	[AD5272_020] = { .max_pos = 1024, .kohms = 20 },
+	[AD5272_050] = { .max_pos = 1024, .kohms = 50 },
+	[AD5272_100] = { .max_pos = 1024, .kohms = 100 },
+	[AD5274_020] = { .max_pos = 256,  .kohms = 20,  .shift = 2 },
+	[AD5274_100] = { .max_pos = 256,  .kohms = 100, .shift = 2 },
+};
+
+struct ad5272_data {
+	struct i2c_client       *client;
+	struct mutex            lock;
+	const struct ad5272_cfg *cfg;
+	u8                      buf[2] __aligned(IIO_DMA_MINALIGN);
+};
+
+static const struct iio_chan_spec ad5272_channel = {
+	.type = IIO_RESISTANCE,
+	.output = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+};
+
+static int ad5272_write(struct ad5272_data *data, int reg, int val)
+{
+	int ret;
+
+	data->buf[0] = (reg << 2) | ((val >> 8) & 0x3);
+	data->buf[1] = (u8)val;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
+	mutex_unlock(&data->lock);
+	return ret < 0 ? ret : 0;
+}
+
+static int ad5272_read(struct ad5272_data *data, int reg, int *val)
+{
+	int ret;
+
+	data->buf[0] = reg << 2;
+	data->buf[1] = 0;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
+	if (ret < 0)
+		goto error;
+
+	ret = i2c_master_recv(data->client, data->buf, sizeof(data->buf));
+	if (ret < 0)
+		goto error;
+
+	*val = ((data->buf[0] & 0x3) << 8) | data->buf[1];
+	ret = 0;
+error:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int ad5272_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		ret = ad5272_read(data, AD5272_RDAC_RD, val);
+		*val = *val >> data->cfg->shift;
+		return ret ? ret : IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * data->cfg->kohms;
+		*val2 = data->cfg->max_pos;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int ad5272_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val >= data->cfg->max_pos || val < 0 || val2)
+		return -EINVAL;
+
+	return ad5272_write(data, AD5272_RDAC_WR, val << data->cfg->shift);
+}
+
+static const struct iio_info ad5272_info = {
+	.read_raw = ad5272_read_raw,
+	.write_raw = ad5272_write_raw,
+};
+
+static int ad5272_reset(struct ad5272_data *data)
+{
+	struct gpio_desc *reset_gpio;
+
+	reset_gpio = devm_gpiod_get_optional(&data->client->dev, "reset",
+		GPIOD_OUT_HIGH);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
+	if (reset_gpio) {
+		udelay(1);
+		gpiod_set_value(reset_gpio, 0);
+	} else {
+		ad5272_write(data, AD5272_RESET, 0);
+	}
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static int ad5272_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct ad5272_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+	data->cfg = &ad5272_cfg[id->driver_data];
+
+	ret = ad5272_reset(data);
+	if (ret)
+		return ret;
+
+	ret = ad5272_write(data, AD5272_CTL, AD5272_RDAC_WR_EN);
+	if (ret < 0)
+		return -ENODEV;
+
+	indio_dev->info = &ad5272_info;
+	indio_dev->channels = &ad5272_channel;
+	indio_dev->num_channels = 1;
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id ad5272_dt_ids[] = {
+	{ .compatible = "adi,ad5272-020", .data = (void *)AD5272_020 },
+	{ .compatible = "adi,ad5272-050", .data = (void *)AD5272_050 },
+	{ .compatible = "adi,ad5272-100", .data = (void *)AD5272_100 },
+	{ .compatible = "adi,ad5274-020", .data = (void *)AD5274_020 },
+	{ .compatible = "adi,ad5274-100", .data = (void *)AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad5272_dt_ids);
+
+static const struct i2c_device_id ad5272_id[] = {
+	{ "ad5272-020", AD5272_020 },
+	{ "ad5272-050", AD5272_050 },
+	{ "ad5272-100", AD5272_100 },
+	{ "ad5274-020", AD5274_020 },
+	{ "ad5274-100", AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad5272_id);
+
+static struct i2c_driver ad5272_driver = {
+	.driver = {
+		.name	= "ad5272",
+		.of_match_table = ad5272_dt_ids,
+	},
+	.probe_new	= ad5272_probe,
+	.id_table	= ad5272_id,
+};
+
+module_i2c_driver(ad5272_driver);
+
+MODULE_AUTHOR("Phil Reid <preid@eletromag.com.au>");
+MODULE_DESCRIPTION("AD5272 digital potentiometer");
+MODULE_LICENSE("GPL v2");