Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 907 insertions, 0 deletions

diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
new file mode 100644
index 000000000..6e19d22e6
--- /dev/null
+++ b/drivers/iio/proximity/sx9360.c
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Driver for Semtech's SX9360 capacitive proximity/button solution.
+ * Based on SX9360 driver and copy of datasheet at:
+ * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
+ */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include "sx_common.h"
+
+/* Nominal Oscillator Frequency. */
+#define SX9360_FOSC_MHZ			4
+#define SX9360_FOSC_HZ			(SX9360_FOSC_MHZ * 1000000)
+
+/* Register definitions. */
+#define SX9360_REG_IRQ_SRC		SX_COMMON_REG_IRQ_SRC
+#define SX9360_REG_STAT		0x01
+#define SX9360_REG_STAT_COMPSTAT_MASK	GENMASK(2, 1)
+#define SX9360_REG_IRQ_MSK		0x02
+#define SX9360_CONVDONE_IRQ		BIT(0)
+#define SX9360_FAR_IRQ			BIT(2)
+#define SX9360_CLOSE_IRQ		BIT(3)
+#define SX9360_REG_IRQ_CFG		0x03
+
+#define SX9360_REG_GNRL_CTRL0		0x10
+#define SX9360_REG_GNRL_CTRL0_PHEN_MASK GENMASK(1, 0)
+#define SX9360_REG_GNRL_CTRL1		0x11
+#define SX9360_REG_GNRL_CTRL1_SCANPERIOD_MASK GENMASK(2, 0)
+#define SX9360_REG_GNRL_CTRL2		0x12
+#define SX9360_REG_GNRL_CTRL2_PERIOD_102MS	0x32
+#define SX9360_REG_GNRL_REG_2_PERIOD_MS(_r)	\
+	(((_r) * 8192) / (SX9360_FOSC_HZ / 1000))
+#define SX9360_REG_GNRL_FREQ_2_REG(_f)  (((_f) * 8192) / SX9360_FOSC_HZ)
+#define SX9360_REG_GNRL_REG_2_FREQ(_r)  (SX9360_FOSC_HZ / ((_r) * 8192))
+
+#define SX9360_REG_AFE_CTRL1		0x21
+#define SX9360_REG_AFE_CTRL1_RESFILTIN_MASK GENMASK(3, 0)
+#define SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS 0
+#define SX9360_REG_AFE_PARAM0_PHR	0x22
+#define SX9360_REG_AFE_PARAM1_PHR	0x23
+#define SX9360_REG_AFE_PARAM0_PHM	0x24
+#define SX9360_REG_AFE_PARAM0_RSVD		0x08
+#define SX9360_REG_AFE_PARAM0_RESOLUTION_MASK	GENMASK(2, 0)
+#define SX9360_REG_AFE_PARAM0_RESOLUTION_128	0x02
+#define SX9360_REG_AFE_PARAM1_PHM	0x25
+#define SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF	0x40
+#define SX9360_REG_AFE_PARAM1_FREQ_83_33HZ	0x06
+
+#define SX9360_REG_PROX_CTRL0_PHR	0x40
+#define SX9360_REG_PROX_CTRL0_PHM	0x41
+#define SX9360_REG_PROX_CTRL0_GAIN_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL0_GAIN_1		0x80
+#define SX9360_REG_PROX_CTRL0_RAWFILT_MASK	GENMASK(2, 0)
+#define SX9360_REG_PROX_CTRL0_RAWFILT_1P50	0x01
+#define SX9360_REG_PROX_CTRL1		0x42
+#define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K 0x20
+#define SX9360_REG_PROX_CTRL2		0x43
+#define SX9360_REG_PROX_CTRL2_AVGDEB_MASK	GENMASK(7, 6)
+#define SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES	0x40
+#define SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K	0x20
+#define SX9360_REG_PROX_CTRL3		0x44
+#define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2	0x08
+#define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK	GENMASK(2, 0)
+#define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256	0x04
+#define SX9360_REG_PROX_CTRL4		0x45
+#define SX9360_REG_PROX_CTRL4_HYST_MASK			GENMASK(5, 4)
+#define SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK	GENMASK(3, 2)
+#define SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK		GENMASK(1, 0)
+#define SX9360_REG_PROX_CTRL5		0x46
+#define SX9360_REG_PROX_CTRL5_PROXTHRESH_32	0x08
+
+#define SX9360_REG_REF_CORR0		0x60
+#define SX9360_REG_REF_CORR1		0x61
+
+#define SX9360_REG_USEFUL_PHR_MSB		0x90
+#define SX9360_REG_USEFUL_PHR_LSB		0x91
+
+#define SX9360_REG_OFFSET_PMR_MSB		0x92
+#define SX9360_REG_OFFSET_PMR_LSB		0x93
+
+#define SX9360_REG_USEFUL_PHM_MSB		0x94
+#define SX9360_REG_USEFUL_PHM_LSB		0x95
+
+#define SX9360_REG_AVG_PHM_MSB		0x96
+#define SX9360_REG_AVG_PHM_LSB		0x97
+
+#define SX9360_REG_DIFF_PHM_MSB		0x98
+#define SX9360_REG_DIFF_PHM_LSB		0x99
+
+#define SX9360_REG_OFFSET_PHM_MSB		0x9a
+#define SX9360_REG_OFFSET_PHM_LSB		0x9b
+
+#define SX9360_REG_USE_FILTER_MSB		0x9a
+#define SX9360_REG_USE_FILTER_LSB		0x9b
+
+#define SX9360_REG_RESET		0xcf
+/* Write this to REG_RESET to do a soft reset. */
+#define SX9360_SOFT_RESET		0xde
+
+#define SX9360_REG_WHOAMI		0xfa
+#define   SX9360_WHOAMI_VALUE				0x60
+
+#define SX9360_REG_REVISION		0xfe
+
+/* 2 channels, Phase Reference and Measurement. */
+#define SX9360_NUM_CHANNELS		2
+
+static const struct iio_chan_spec sx9360_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.indexed = 1,
+		.address = SX9360_REG_USEFUL_PHR_MSB,
+		.channel = 0,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.indexed = 1,
+		.address = SX9360_REG_USEFUL_PHM_MSB,
+		.event_spec = sx_common_events,
+		.num_event_specs = ARRAY_SIZE(sx_common_events),
+		.channel = 1,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ *
+ * The frequency control register holds the period, with a ~2ms increment.
+ * Therefore the smallest frequency is 4MHz / (2047 * 8192),
+ * The fastest is 4MHz / 8192.
+ * The interval is not linear, but given there is 2047 possible value,
+ * Returns the fake increment of (Max-Min)/2047
+ */
+static const struct {
+	int val;
+	int val2;
+} sx9360_samp_freq_interval[] = {
+	{ 0, 281250 },  /* 4MHz / (8192 * 2047) */
+	{ 0, 281250 },
+	{ 448, 281250 },  /* 4MHz / 8192 */
+};
+
+static const struct regmap_range sx9360_writable_reg_ranges[] = {
+	/*
+	 * To set COMPSTAT for compensation, even if datasheet says register is
+	 * RO.
+	 */
+	regmap_reg_range(SX9360_REG_STAT, SX9360_REG_IRQ_CFG),
+	regmap_reg_range(SX9360_REG_GNRL_CTRL0, SX9360_REG_GNRL_CTRL2),
+	regmap_reg_range(SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_PARAM1_PHM),
+	regmap_reg_range(SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL5),
+	regmap_reg_range(SX9360_REG_REF_CORR0, SX9360_REG_REF_CORR1),
+	regmap_reg_range(SX9360_REG_OFFSET_PMR_MSB, SX9360_REG_OFFSET_PMR_LSB),
+	regmap_reg_range(SX9360_REG_RESET, SX9360_REG_RESET),
+};
+
+static const struct regmap_access_table sx9360_writeable_regs = {
+	.yes_ranges = sx9360_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9360_writable_reg_ranges),
+};
+
+/*
+ * All allocated registers are readable, so we just list unallocated
+ * ones.
+ */
+static const struct regmap_range sx9360_non_readable_reg_ranges[] = {
+	regmap_reg_range(SX9360_REG_IRQ_CFG + 1, SX9360_REG_GNRL_CTRL0 - 1),
+	regmap_reg_range(SX9360_REG_GNRL_CTRL2 + 1, SX9360_REG_AFE_CTRL1 - 1),
+	regmap_reg_range(SX9360_REG_AFE_PARAM1_PHM + 1,
+			 SX9360_REG_PROX_CTRL0_PHR - 1),
+	regmap_reg_range(SX9360_REG_PROX_CTRL5 + 1, SX9360_REG_REF_CORR0 - 1),
+	regmap_reg_range(SX9360_REG_REF_CORR1 + 1,
+			 SX9360_REG_USEFUL_PHR_MSB - 1),
+	regmap_reg_range(SX9360_REG_USE_FILTER_LSB + 1, SX9360_REG_RESET - 1),
+	regmap_reg_range(SX9360_REG_RESET + 1, SX9360_REG_WHOAMI - 1),
+	regmap_reg_range(SX9360_REG_WHOAMI + 1, SX9360_REG_REVISION - 1),
+};
+
+static const struct regmap_access_table sx9360_readable_regs = {
+	.no_ranges = sx9360_non_readable_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(sx9360_non_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9360_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9360_REG_IRQ_SRC, SX9360_REG_STAT),
+	regmap_reg_range(SX9360_REG_USEFUL_PHR_MSB, SX9360_REG_USE_FILTER_LSB),
+	regmap_reg_range(SX9360_REG_WHOAMI, SX9360_REG_WHOAMI),
+	regmap_reg_range(SX9360_REG_REVISION, SX9360_REG_REVISION),
+};
+
+static const struct regmap_access_table sx9360_volatile_regs = {
+	.yes_ranges = sx9360_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9360_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9360_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9360_REG_REVISION,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9360_writeable_regs,
+	.rd_table = &sx9360_readable_regs,
+	.volatile_table = &sx9360_volatile_regs,
+};
+
+static int sx9360_read_prox_data(struct sx_common_data *data,
+				 const struct iio_chan_spec *chan,
+				 __be16 *val)
+{
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9360_wait_for_sample(struct sx_common_data *data)
+{
+	int ret;
+	__be16 buf;
+
+	ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1,
+			       &buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+	msleep(SX9360_REG_GNRL_REG_2_PERIOD_MS(be16_to_cpu(buf)));
+
+	return 0;
+}
+
+static int sx9360_read_gain(struct sx_common_data *data,
+			    const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int reg, regval;
+	int ret;
+
+	reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel;
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	*val = 1 << FIELD_GET(SX9360_REG_PROX_CTRL0_GAIN_MASK, regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_samp_freq(struct sx_common_data *data,
+				 int *val, int *val2)
+{
+	int ret, divisor;
+	__be16 buf;
+
+	ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1,
+			       &buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+	divisor = be16_to_cpu(buf);
+	if (divisor == 0) {
+		*val = 0;
+		return IIO_VAL_INT;
+	}
+
+	*val = SX9360_FOSC_HZ;
+	*val2 = divisor * 8192;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int sx9360_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx_common_read_proximity(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9360_read_gain(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9360_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const char *sx9360_channel_labels[SX9360_NUM_CHANNELS] = {
+	"reference", "main",
+};
+
+static int sx9360_read_label(struct iio_dev *iio_dev, const struct iio_chan_spec *chan,
+			     char *label)
+{
+	return sysfs_emit(label, "%s\n", sx9360_channel_labels[chan->channel]);
+}
+
+static const int sx9360_gain_vals[] = { 1, 2, 4, 8 };
+
+static int sx9360_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(sx9360_gain_vals);
+		*vals = sx9360_gain_vals;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(sx9360_samp_freq_interval) * 2;
+		*vals = (int *)sx9360_samp_freq_interval;
+		return IIO_AVAIL_RANGE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_set_samp_freq(struct sx_common_data *data,
+				int val, int val2)
+{
+	int ret, reg;
+	__be16 buf;
+
+	reg = val * 8192 / SX9360_FOSC_HZ + val2 * 8192 / (SX9360_FOSC_MHZ);
+	buf = cpu_to_be16(reg);
+	mutex_lock(&data->mutex);
+
+	ret = regmap_bulk_write(data->regmap, SX9360_REG_GNRL_CTRL1, &buf,
+				sizeof(buf));
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_read_thresh(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL5, &regval);
+	if (ret)
+		return ret;
+
+	if (regval <= 1)
+		*val = regval;
+	else
+		*val = (regval * regval) / 2;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_hysteresis(struct sx_common_data *data, int *val)
+{
+	unsigned int regval, pthresh;
+	int ret;
+
+	ret = sx9360_read_thresh(data, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_HYST_MASK, regval);
+	if (!regval)
+		*val = 0;
+	else
+		*val = pthresh >> (5 - regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_far_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_close_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_event_val(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int *val, int *val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9360_read_thresh(data, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9360_read_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9360_read_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9360_read_hysteresis(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_write_thresh(struct sx_common_data *data, int _val)
+{
+	unsigned int val = _val;
+	int ret;
+
+	if (val >= 1)
+		val = int_sqrt(2 * val);
+
+	if (val > 0xff)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9360_REG_PROX_CTRL5, val);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_hysteresis(struct sx_common_data *data, int _val)
+{
+	unsigned int hyst, val = _val;
+	int ret, pthresh;
+
+	ret = sx9360_read_thresh(data, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0)
+		hyst = 0;
+	else if (val >= pthresh >> 2)
+		hyst = 3;
+	else if (val >= pthresh >> 3)
+		hyst = 2;
+	else if (val >= pthresh >> 4)
+		hyst = 1;
+	else
+		return -EINVAL;
+
+	hyst = FIELD_PREP(SX9360_REG_PROX_CTRL4_HYST_MASK, hyst);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_HYST_MASK, hyst);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_far_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_close_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_event_val(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info, int val, int val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9360_write_thresh(data, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9360_write_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9360_write_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9360_write_hysteresis(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_write_gain(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int val)
+{
+	unsigned int gain, reg;
+	int ret;
+
+	gain = ilog2(val);
+	reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel;
+	gain = FIELD_PREP(SX9360_REG_PROX_CTRL0_GAIN_MASK, gain);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, reg,
+				 SX9360_REG_PROX_CTRL0_GAIN_MASK,
+				 gain);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan, int val, int val2,
+			    long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9360_set_samp_freq(data, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		return sx9360_write_gain(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct sx_common_reg_default sx9360_default_regs[] = {
+	{ SX9360_REG_IRQ_MSK, 0x00 },
+	{ SX9360_REG_IRQ_CFG, 0x00 },
+	/*
+	 * The lower 2 bits should not be set as it enable sensors measurements.
+	 * Turning the detection on before the configuration values are set to
+	 * good values can cause the device to return erroneous readings.
+	 */
+	{ SX9360_REG_GNRL_CTRL0, 0x00 },
+	{ SX9360_REG_GNRL_CTRL1, 0x00 },
+	{ SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS },
+
+	{ SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS },
+	{ SX9360_REG_AFE_PARAM0_PHR, SX9360_REG_AFE_PARAM0_RSVD |
+		SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+	{ SX9360_REG_AFE_PARAM1_PHR, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
+		SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+	{ SX9360_REG_AFE_PARAM0_PHM, SX9360_REG_AFE_PARAM0_RSVD |
+		SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+	{ SX9360_REG_AFE_PARAM1_PHM, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
+		SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+
+	{ SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL0_GAIN_1 |
+		SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9360_REG_PROX_CTRL0_PHM, SX9360_REG_PROX_CTRL0_GAIN_1 |
+		SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K },
+	{ SX9360_REG_PROX_CTRL2, SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES |
+		SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K },
+	{ SX9360_REG_PROX_CTRL3, SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 |
+		SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256 },
+	{ SX9360_REG_PROX_CTRL4, 0x00 },
+	{ SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32 },
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9360_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* run the compensation phase on all channels */
+	ret = regmap_update_bits(data->regmap, SX9360_REG_STAT,
+				 SX9360_REG_STAT_COMPSTAT_MASK,
+				 SX9360_REG_STAT_COMPSTAT_MASK);
+	if (ret)
+		return ret;
+
+	return regmap_read_poll_timeout(data->regmap, SX9360_REG_STAT, val,
+				       !(val & SX9360_REG_STAT_COMPSTAT_MASK),
+				       20000, 2000000);
+}
+
+static const struct sx_common_reg_default *
+sx9360_get_default_reg(struct device *dev, int idx,
+		       struct sx_common_reg_default *reg_def)
+{
+	u32 raw = 0, pos = 0;
+	int ret;
+
+	memcpy(reg_def, &sx9360_default_regs[idx], sizeof(*reg_def));
+	switch (reg_def->reg) {
+	case SX9360_REG_AFE_CTRL1:
+		ret = device_property_read_u32(dev,
+				"semtech,input-precharge-resistor-ohms",
+				&raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9360_REG_AFE_CTRL1_RESFILTIN_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_AFE_CTRL1_RESFILTIN_MASK,
+					   raw / 2000);
+		break;
+	case SX9360_REG_AFE_PARAM0_PHR:
+	case SX9360_REG_AFE_PARAM0_PHM:
+		ret = device_property_read_u32(dev, "semtech,resolution", &raw);
+		if (ret)
+			break;
+
+		raw = ilog2(raw) - 3;
+
+		reg_def->def &= ~SX9360_REG_AFE_PARAM0_RESOLUTION_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_AFE_PARAM0_RESOLUTION_MASK, raw);
+		break;
+	case SX9360_REG_PROX_CTRL0_PHR:
+	case SX9360_REG_PROX_CTRL0_PHM:
+		ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9360_REG_PROX_CTRL0_RAWFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL0_RAWFILT_MASK, raw);
+		break;
+	case SX9360_REG_PROX_CTRL3:
+		ret = device_property_read_u32(dev, "semtech,avg-pos-strength",
+					       &pos);
+		if (ret)
+			break;
+
+		/* Powers of 2, except for a gap between 16 and 64 */
+		raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
+		reg_def->def &= ~SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK, raw);
+		break;
+	}
+
+	return reg_def;
+}
+
+static int sx9360_check_whoami(struct device *dev, struct iio_dev *indio_dev)
+{
+	/*
+	 * Only one sensor for this driver. Assuming the device tree
+	 * is correct, just set the sensor name.
+	 */
+	indio_dev->name = "sx9360";
+	return 0;
+}
+
+static const struct sx_common_chip_info sx9360_chip_info = {
+	.reg_stat = SX9360_REG_STAT,
+	.reg_irq_msk = SX9360_REG_IRQ_MSK,
+	.reg_enable_chan = SX9360_REG_GNRL_CTRL0,
+	.reg_reset = SX9360_REG_RESET,
+
+	.mask_enable_chan = SX9360_REG_GNRL_CTRL0_PHEN_MASK,
+	.stat_offset = 2,
+	.num_channels = SX9360_NUM_CHANNELS,
+	.num_default_regs = ARRAY_SIZE(sx9360_default_regs),
+
+	.ops = {
+		.read_prox_data = sx9360_read_prox_data,
+		.check_whoami = sx9360_check_whoami,
+		.init_compensation = sx9360_init_compensation,
+		.wait_for_sample = sx9360_wait_for_sample,
+		.get_default_reg = sx9360_get_default_reg,
+	},
+
+	.iio_channels = sx9360_channels,
+	.num_iio_channels = ARRAY_SIZE(sx9360_channels),
+	.iio_info =  {
+		.read_raw = sx9360_read_raw,
+		.read_avail = sx9360_read_avail,
+		.read_label = sx9360_read_label,
+		.read_event_value = sx9360_read_event_val,
+		.write_event_value = sx9360_write_event_val,
+		.write_raw = sx9360_write_raw,
+		.read_event_config = sx_common_read_event_config,
+		.write_event_config = sx_common_write_event_config,
+	},
+};
+
+static int sx9360_probe(struct i2c_client *client)
+{
+	return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config);
+}
+
+static int sx9360_suspend(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	unsigned int regval;
+	int ret;
+
+	disable_irq_nosync(data->client->irq);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, &regval);
+
+	data->suspend_ctrl =
+		FIELD_GET(SX9360_REG_GNRL_CTRL0_PHEN_MASK, regval);
+
+	if (ret < 0)
+		goto out;
+
+	/* Disable all phases, send the device to sleep. */
+	ret = regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9360_resume(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_GNRL_CTRL0,
+				 SX9360_REG_GNRL_CTRL0_PHEN_MASK,
+				 data->suspend_ctrl);
+	mutex_unlock(&data->mutex);
+	if (ret)
+		return ret;
+
+	enable_irq(data->client->irq);
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
+
+static const struct acpi_device_id sx9360_acpi_match[] = {
+	{ "STH9360", SX9360_WHOAMI_VALUE },
+	{ "SAMM0208", SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, sx9360_acpi_match);
+
+static const struct of_device_id sx9360_of_match[] = {
+	{ .compatible = "semtech,sx9360", (void *)SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sx9360_of_match);
+
+static const struct i2c_device_id sx9360_id[] = {
+	{"sx9360", SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sx9360_id);
+
+static struct i2c_driver sx9360_driver = {
+	.driver = {
+		.name	= "sx9360",
+		.acpi_match_table = sx9360_acpi_match,
+		.of_match_table = sx9360_of_match,
+		.pm = pm_sleep_ptr(&sx9360_pm_ops),
+
+		/*
+		 * Lots of i2c transfers in probe + over 200 ms waiting in
+		 * sx9360_init_compensation() mean a slow probe; prefer async
+		 * so we don't delay boot if we're builtin to the kernel.
+		 */
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe_new	= sx9360_probe,
+	.id_table	= sx9360_id,
+};
+module_i2c_driver(sx9360_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9360 proximity sensor");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(SEMTECH_PROX);