Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 551 insertions, 0 deletions

diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
new file mode 100644
index 000000000..7e97944f7
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2016 Synaptics Incorporated
+ */
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/rmi.h>
+#include "rmi_driver.h"
+#include "rmi_2d_sensor.h"
+
+enum rmi_f12_object_type {
+	RMI_F12_OBJECT_NONE			= 0x00,
+	RMI_F12_OBJECT_FINGER			= 0x01,
+	RMI_F12_OBJECT_STYLUS			= 0x02,
+	RMI_F12_OBJECT_PALM			= 0x03,
+	RMI_F12_OBJECT_UNCLASSIFIED		= 0x04,
+	RMI_F12_OBJECT_GLOVED_FINGER		= 0x06,
+	RMI_F12_OBJECT_NARROW_OBJECT		= 0x07,
+	RMI_F12_OBJECT_HAND_EDGE		= 0x08,
+	RMI_F12_OBJECT_COVER			= 0x0A,
+	RMI_F12_OBJECT_STYLUS_2			= 0x0B,
+	RMI_F12_OBJECT_ERASER			= 0x0C,
+	RMI_F12_OBJECT_SMALL_OBJECT		= 0x0D,
+};
+
+#define F12_DATA1_BYTES_PER_OBJ			8
+
+struct f12_data {
+	struct rmi_2d_sensor sensor;
+	struct rmi_2d_sensor_platform_data sensor_pdata;
+	bool has_dribble;
+
+	u16 data_addr;
+
+	struct rmi_register_descriptor query_reg_desc;
+	struct rmi_register_descriptor control_reg_desc;
+	struct rmi_register_descriptor data_reg_desc;
+
+	/* F12 Data1 describes sensed objects */
+	const struct rmi_register_desc_item *data1;
+	u16 data1_offset;
+
+	/* F12 Data5 describes finger ACM */
+	const struct rmi_register_desc_item *data5;
+	u16 data5_offset;
+
+	/* F12 Data5 describes Pen */
+	const struct rmi_register_desc_item *data6;
+	u16 data6_offset;
+
+
+	/* F12 Data9 reports relative data */
+	const struct rmi_register_desc_item *data9;
+	u16 data9_offset;
+
+	const struct rmi_register_desc_item *data15;
+	u16 data15_offset;
+
+	unsigned long *abs_mask;
+	unsigned long *rel_mask;
+};
+
+static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
+{
+	const struct rmi_register_desc_item *item;
+	struct rmi_2d_sensor *sensor = &f12->sensor;
+	struct rmi_function *fn = sensor->fn;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int ret;
+	int offset;
+	u8 buf[15];
+	int pitch_x = 0;
+	int pitch_y = 0;
+	int rx_receivers = 0;
+	int tx_receivers = 0;
+
+	item = rmi_get_register_desc_item(&f12->control_reg_desc, 8);
+	if (!item) {
+		dev_err(&fn->dev,
+			"F12 does not have the sensor tuning control register\n");
+		return -ENODEV;
+	}
+
+	offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8);
+
+	if (item->reg_size > sizeof(buf)) {
+		dev_err(&fn->dev,
+			"F12 control8 should be no bigger than %zd bytes, not: %ld\n",
+			sizeof(buf), item->reg_size);
+		return -ENODEV;
+	}
+
+	ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf,
+				item->reg_size);
+	if (ret)
+		return ret;
+
+	offset = 0;
+	if (rmi_register_desc_has_subpacket(item, 0)) {
+		sensor->max_x = (buf[offset + 1] << 8) | buf[offset];
+		sensor->max_y = (buf[offset + 3] << 8) | buf[offset + 2];
+		offset += 4;
+	}
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__,
+		sensor->max_x, sensor->max_y);
+
+	if (rmi_register_desc_has_subpacket(item, 1)) {
+		pitch_x = (buf[offset + 1] << 8) | buf[offset];
+		pitch_y	= (buf[offset + 3] << 8) | buf[offset + 2];
+		offset += 4;
+	}
+
+	if (rmi_register_desc_has_subpacket(item, 2)) {
+		/* Units 1/128 sensor pitch */
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+			"%s: Inactive Border xlo:%d xhi:%d ylo:%d yhi:%d\n",
+			__func__,
+			buf[offset], buf[offset + 1],
+			buf[offset + 2], buf[offset + 3]);
+
+		offset += 4;
+	}
+
+	if (rmi_register_desc_has_subpacket(item, 3)) {
+		rx_receivers = buf[offset];
+		tx_receivers = buf[offset + 1];
+		offset += 2;
+	}
+
+	/* Skip over sensor flags */
+	if (rmi_register_desc_has_subpacket(item, 4))
+		offset += 1;
+
+	sensor->x_mm = (pitch_x * rx_receivers) >> 12;
+	sensor->y_mm = (pitch_y * tx_receivers) >> 12;
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__,
+		sensor->x_mm, sensor->y_mm);
+
+	return 0;
+}
+
+static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
+{
+	int i;
+	struct rmi_2d_sensor *sensor = &f12->sensor;
+	int objects = f12->data1->num_subpackets;
+
+	if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size)
+		objects = size / F12_DATA1_BYTES_PER_OBJ;
+
+	for (i = 0; i < objects; i++) {
+		struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];
+
+		obj->type = RMI_2D_OBJECT_NONE;
+		obj->mt_tool = MT_TOOL_FINGER;
+
+		switch (data1[0]) {
+		case RMI_F12_OBJECT_FINGER:
+			obj->type = RMI_2D_OBJECT_FINGER;
+			break;
+		case RMI_F12_OBJECT_STYLUS:
+			obj->type = RMI_2D_OBJECT_STYLUS;
+			obj->mt_tool = MT_TOOL_PEN;
+			break;
+		case RMI_F12_OBJECT_PALM:
+			obj->type = RMI_2D_OBJECT_PALM;
+			obj->mt_tool = MT_TOOL_PALM;
+			break;
+		case RMI_F12_OBJECT_UNCLASSIFIED:
+			obj->type = RMI_2D_OBJECT_UNCLASSIFIED;
+			break;
+		}
+
+		obj->x = (data1[2] << 8) | data1[1];
+		obj->y = (data1[4] << 8) | data1[3];
+		obj->z = data1[5];
+		obj->wx = data1[6];
+		obj->wy = data1[7];
+
+		rmi_2d_sensor_abs_process(sensor, obj, i);
+
+		data1 += F12_DATA1_BYTES_PER_OBJ;
+	}
+
+	if (sensor->kernel_tracking)
+		input_mt_assign_slots(sensor->input,
+				      sensor->tracking_slots,
+				      sensor->tracking_pos,
+				      sensor->nbr_fingers,
+				      sensor->dmax);
+
+	for (i = 0; i < objects; i++)
+		rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
+}
+
+static irqreturn_t rmi_f12_attention(int irq, void *ctx)
+{
+	int retval;
+	struct rmi_function *fn = ctx;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+	struct rmi_2d_sensor *sensor = &f12->sensor;
+	int valid_bytes = sensor->pkt_size;
+
+	if (drvdata->attn_data.data) {
+		if (sensor->attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
+		else
+			valid_bytes = sensor->attn_size;
+		memcpy(sensor->data_pkt, drvdata->attn_data.data,
+			valid_bytes);
+		drvdata->attn_data.data += valid_bytes;
+		drvdata->attn_data.size -= valid_bytes;
+	} else {
+		retval = rmi_read_block(rmi_dev, f12->data_addr,
+					sensor->data_pkt, sensor->pkt_size);
+		if (retval < 0) {
+			dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
+				retval);
+			return IRQ_RETVAL(retval);
+		}
+	}
+
+	if (f12->data1)
+		rmi_f12_process_objects(f12,
+			&sensor->data_pkt[f12->data1_offset], valid_bytes);
+
+	input_mt_sync_frame(sensor->input);
+
+	return IRQ_HANDLED;
+}
+
+static int rmi_f12_write_control_regs(struct rmi_function *fn)
+{
+	int ret;
+	const struct rmi_register_desc_item *item;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+	int control_size;
+	char buf[3];
+	u16 control_offset = 0;
+	u8 subpacket_offset = 0;
+
+	if (f12->has_dribble
+	    && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
+		item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
+		if (item) {
+			control_offset = rmi_register_desc_calc_reg_offset(
+						&f12->control_reg_desc, 20);
+
+			/*
+			 * The byte containing the EnableDribble bit will be
+			 * in either byte 0 or byte 2 of control 20. Depending
+			 * on the existence of subpacket 0. If control 20 is
+			 * larger then 3 bytes, just read the first 3.
+			 */
+			control_size = min(item->reg_size, 3UL);
+
+			ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
+					+ control_offset, buf, control_size);
+			if (ret)
+				return ret;
+
+			if (rmi_register_desc_has_subpacket(item, 0))
+				subpacket_offset += 1;
+
+			switch (f12->sensor.dribble) {
+			case RMI_REG_STATE_OFF:
+				buf[subpacket_offset] &= ~BIT(2);
+				break;
+			case RMI_REG_STATE_ON:
+				buf[subpacket_offset] |= BIT(2);
+				break;
+			case RMI_REG_STATE_DEFAULT:
+			default:
+				break;
+			}
+
+			ret = rmi_write_block(rmi_dev,
+				fn->fd.control_base_addr + control_offset,
+				buf, control_size);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+
+}
+
+static int rmi_f12_config(struct rmi_function *fn)
+{
+	struct rmi_driver *drv = fn->rmi_dev->driver;
+	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+	struct rmi_2d_sensor *sensor;
+	int ret;
+
+	sensor = &f12->sensor;
+
+	if (!sensor->report_abs)
+		drv->clear_irq_bits(fn->rmi_dev, f12->abs_mask);
+	else
+		drv->set_irq_bits(fn->rmi_dev, f12->abs_mask);
+
+	drv->clear_irq_bits(fn->rmi_dev, f12->rel_mask);
+
+	ret = rmi_f12_write_control_regs(fn);
+	if (ret)
+		dev_warn(&fn->dev,
+			"Failed to write F12 control registers: %d\n", ret);
+
+	return 0;
+}
+
+static int rmi_f12_probe(struct rmi_function *fn)
+{
+	struct f12_data *f12;
+	int ret;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	char buf;
+	u16 query_addr = fn->fd.query_base_addr;
+	const struct rmi_register_desc_item *item;
+	struct rmi_2d_sensor *sensor;
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	u16 data_offset = 0;
+	int mask_size;
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
+
+	mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);
+
+	ret = rmi_read(fn->rmi_dev, query_addr, &buf);
+	if (ret < 0) {
+		dev_err(&fn->dev, "Failed to read general info register: %d\n",
+			ret);
+		return -ENODEV;
+	}
+	++query_addr;
+
+	if (!(buf & BIT(0))) {
+		dev_err(&fn->dev,
+			"Behavior of F12 without register descriptors is undefined.\n");
+		return -ENODEV;
+	}
+
+	f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data) + mask_size * 2,
+			GFP_KERNEL);
+	if (!f12)
+		return -ENOMEM;
+
+	f12->abs_mask = (unsigned long *)((char *)f12
+			+ sizeof(struct f12_data));
+	f12->rel_mask = (unsigned long *)((char *)f12
+			+ sizeof(struct f12_data) + mask_size);
+
+	set_bit(fn->irq_pos, f12->abs_mask);
+	set_bit(fn->irq_pos + 1, f12->rel_mask);
+
+	f12->has_dribble = !!(buf & BIT(3));
+
+	if (fn->dev.of_node) {
+		ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
+		if (ret)
+			return ret;
+	} else {
+		f12->sensor_pdata = pdata->sensor_pdata;
+	}
+
+	ret = rmi_read_register_desc(rmi_dev, query_addr,
+					&f12->query_reg_desc);
+	if (ret) {
+		dev_err(&fn->dev,
+			"Failed to read the Query Register Descriptor: %d\n",
+			ret);
+		return ret;
+	}
+	query_addr += 3;
+
+	ret = rmi_read_register_desc(rmi_dev, query_addr,
+						&f12->control_reg_desc);
+	if (ret) {
+		dev_err(&fn->dev,
+			"Failed to read the Control Register Descriptor: %d\n",
+			ret);
+		return ret;
+	}
+	query_addr += 3;
+
+	ret = rmi_read_register_desc(rmi_dev, query_addr,
+						&f12->data_reg_desc);
+	if (ret) {
+		dev_err(&fn->dev,
+			"Failed to read the Data Register Descriptor: %d\n",
+			ret);
+		return ret;
+	}
+	query_addr += 3;
+
+	sensor = &f12->sensor;
+	sensor->fn = fn;
+	f12->data_addr = fn->fd.data_base_addr;
+	sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc);
+
+	sensor->axis_align =
+		f12->sensor_pdata.axis_align;
+
+	sensor->x_mm = f12->sensor_pdata.x_mm;
+	sensor->y_mm = f12->sensor_pdata.y_mm;
+	sensor->dribble = f12->sensor_pdata.dribble;
+
+	if (sensor->sensor_type == rmi_sensor_default)
+		sensor->sensor_type =
+			f12->sensor_pdata.sensor_type;
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__,
+		sensor->pkt_size);
+	sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL);
+	if (!sensor->data_pkt)
+		return -ENOMEM;
+
+	dev_set_drvdata(&fn->dev, f12);
+
+	ret = rmi_f12_read_sensor_tuning(f12);
+	if (ret)
+		return ret;
+
+	/*
+	 * Figure out what data is contained in the data registers. HID devices
+	 * may have registers defined, but their data is not reported in the
+	 * HID attention report. Registers which are not reported in the HID
+	 * attention report check to see if the device is receiving data from
+	 * HID attention reports.
+	 */
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
+	if (item) {
+		f12->data1 = item;
+		f12->data1_offset = data_offset;
+		data_offset += item->reg_size;
+		sensor->nbr_fingers = item->num_subpackets;
+		sensor->report_abs = 1;
+		sensor->attn_size += item->reg_size;
+	}
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
+	if (item) {
+		f12->data5 = item;
+		f12->data5_offset = data_offset;
+		data_offset += item->reg_size;
+		sensor->attn_size += item->reg_size;
+	}
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
+	if (item && !drvdata->attn_data.data) {
+		f12->data6 = item;
+		f12->data6_offset = data_offset;
+		data_offset += item->reg_size;
+	}
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
+	if (item && !drvdata->attn_data.data) {
+		f12->data9 = item;
+		f12->data9_offset = data_offset;
+		data_offset += item->reg_size;
+		if (!sensor->report_abs)
+			sensor->report_rel = 1;
+	}
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
+	if (item && !drvdata->attn_data.data)
+		data_offset += item->reg_size;
+
+	item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
+	if (item && !drvdata->attn_data.data) {
+		f12->data15 = item;
+		f12->data15_offset = data_offset;
+		data_offset += item->reg_size;
+	}
+
+	/* allocate the in-kernel tracking buffers */
+	sensor->tracking_pos = devm_kcalloc(&fn->dev,
+			sensor->nbr_fingers, sizeof(struct input_mt_pos),
+			GFP_KERNEL);
+	sensor->tracking_slots = devm_kcalloc(&fn->dev,
+			sensor->nbr_fingers, sizeof(int), GFP_KERNEL);
+	sensor->objs = devm_kcalloc(&fn->dev,
+			sensor->nbr_fingers,
+			sizeof(struct rmi_2d_sensor_abs_object),
+			GFP_KERNEL);
+	if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
+		return -ENOMEM;
+
+	ret = rmi_2d_sensor_configure_input(fn, sensor);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+struct rmi_function_handler rmi_f12_handler = {
+	.driver = {
+		.name = "rmi4_f12",
+	},
+	.func = 0x12,
+	.probe = rmi_f12_probe,
+	.config = rmi_f12_config,
+	.attention = rmi_f12_attention,
+};