Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 349 insertions, 0 deletions

diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h
new file mode 100644
index 000000000..d8545d228
--- /dev/null
+++ b/drivers/media/i2c/m5mols/m5mols.h
@@ -0,0 +1,349 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ */
+
+#ifndef M5MOLS_H
+#define M5MOLS_H
+
+#include <linux/sizes.h>
+#include <linux/gpio/consumer.h>
+#include <media/v4l2-subdev.h>
+#include "m5mols_reg.h"
+
+
+/* An amount of data transmitted in addition to the value
+ * determined by CAPP_JPEG_SIZE_MAX register.
+ */
+#define M5MOLS_JPEG_TAGS_SIZE		0x20000
+#define M5MOLS_MAIN_JPEG_SIZE_MAX	(5 * SZ_1M)
+
+extern int m5mols_debug;
+
+enum m5mols_restype {
+	M5MOLS_RESTYPE_MONITOR,
+	M5MOLS_RESTYPE_CAPTURE,
+	M5MOLS_RESTYPE_MAX,
+};
+
+/**
+ * struct m5mols_resolution - structure for the resolution
+ * @type: resolution type according to the pixel code
+ * @width: width of the resolution
+ * @height: height of the resolution
+ * @reg: resolution preset register value
+ */
+struct m5mols_resolution {
+	u8 reg;
+	enum m5mols_restype type;
+	u16 width;
+	u16 height;
+};
+
+/**
+ * struct m5mols_exif - structure for the EXIF information of M-5MOLS
+ * @exposure_time: exposure time register value
+ * @shutter_speed: speed of the shutter register value
+ * @aperture: aperture register value
+ * @brightness: brightness register value
+ * @exposure_bias: it calls also EV bias
+ * @iso_speed: ISO register value
+ * @flash: status register value of the flash
+ * @sdr: status register value of the Subject Distance Range
+ * @qval: not written exact meaning in document
+ */
+struct m5mols_exif {
+	u32 exposure_time;
+	u32 shutter_speed;
+	u32 aperture;
+	u32 brightness;
+	u32 exposure_bias;
+	u16 iso_speed;
+	u16 flash;
+	u16 sdr;
+	u16 qval;
+};
+
+/**
+ * struct m5mols_capture - Structure for the capture capability
+ * @exif: EXIF information
+ * @buf_size: internal JPEG frame buffer size, in bytes
+ * @main: size in bytes of the main image
+ * @thumb: size in bytes of the thumb image, if it was accompanied
+ * @total: total size in bytes of the produced image
+ */
+struct m5mols_capture {
+	struct m5mols_exif exif;
+	unsigned int buf_size;
+	u32 main;
+	u32 thumb;
+	u32 total;
+};
+
+/**
+ * struct m5mols_scenemode - structure for the scenemode capability
+ * @metering: metering light register value
+ * @ev_bias: EV bias register value
+ * @wb_mode: mode which means the WhiteBalance is Auto or Manual
+ * @wb_preset: whitebalance preset register value in the Manual mode
+ * @chroma_en: register value whether the Chroma capability is enabled or not
+ * @chroma_lvl: chroma's level register value
+ * @edge_en: register value Whether the Edge capability is enabled or not
+ * @edge_lvl: edge's level register value
+ * @af_range: Auto Focus's range
+ * @fd_mode: Face Detection mode
+ * @mcc: Multi-axis Color Conversion which means emotion color
+ * @light: status of the Light
+ * @flash: status of the Flash
+ * @tone: Tone color which means Contrast
+ * @iso: ISO register value
+ * @capt_mode: Mode of the Image Stabilization while the camera capturing
+ * @wdr: Wide Dynamic Range register value
+ *
+ * The each value according to each scenemode is recommended in the documents.
+ */
+struct m5mols_scenemode {
+	u8 metering;
+	u8 ev_bias;
+	u8 wb_mode;
+	u8 wb_preset;
+	u8 chroma_en;
+	u8 chroma_lvl;
+	u8 edge_en;
+	u8 edge_lvl;
+	u8 af_range;
+	u8 fd_mode;
+	u8 mcc;
+	u8 light;
+	u8 flash;
+	u8 tone;
+	u8 iso;
+	u8 capt_mode;
+	u8 wdr;
+};
+
+#define VERSION_STRING_SIZE	22
+
+/**
+ * struct m5mols_version - firmware version information
+ * @customer:	customer information
+ * @project:	version of project information according to customer
+ * @fw:		firmware revision
+ * @hw:		hardware revision
+ * @param:	version of the parameter
+ * @awb:	Auto WhiteBalance algorithm version
+ * @str:	information about manufacturer and packaging vendor
+ * @af:		Auto Focus version
+ *
+ * The register offset starts the customer version at 0x0, and it ends
+ * the awb version at 0x09. The customer, project information occupies 1 bytes
+ * each. And also the fw, hw, param, awb each requires 2 bytes. The str is
+ * unique string associated with firmware's version. It includes information
+ * about manufacturer and the vendor of the sensor's packaging. The least
+ * significant 2 bytes of the string indicate packaging manufacturer.
+ */
+struct m5mols_version {
+	u8	customer;
+	u8	project;
+	u16	fw;
+	u16	hw;
+	u16	param;
+	u16	awb;
+	u8	str[VERSION_STRING_SIZE];
+	u8	af;
+};
+
+/**
+ * struct m5mols_info - M-5MOLS driver data structure
+ * @pdata: platform data
+ * @sd: v4l-subdev instance
+ * @pad: media pad
+ * @irq_waitq: waitqueue for the capture
+ * @irq_done: set to 1 in the interrupt handler
+ * @handle: control handler
+ * @auto_exposure: auto/manual exposure control
+ * @exposure_bias: exposure compensation control
+ * @exposure: manual exposure control
+ * @metering: exposure metering control
+ * @auto_iso: auto/manual ISO sensitivity control
+ * @iso: manual ISO sensitivity control
+ * @auto_wb: auto white balance control
+ * @lock_3a: 3A lock control
+ * @colorfx: color effect control
+ * @saturation: saturation control
+ * @zoom: zoom control
+ * @wdr: wide dynamic range control
+ * @stabilization: image stabilization control
+ * @jpeg_quality: JPEG compression quality control
+ * @set_power: optional power callback to the board code
+ * @reset: GPIO driving the reset pin of M-5MOLS
+ * @lock: mutex protecting the structure fields below
+ * @ffmt: current fmt according to resolution type
+ * @res_type: current resolution type
+ * @ver: information of the version
+ * @cap: the capture mode attributes
+ * @isp_ready: 1 when the ISP controller has completed booting
+ * @power: current sensor's power status
+ * @ctrl_sync: 1 when the control handler state is restored in H/W
+ * @resolution:	register value for current resolution
+ * @mode: register value for current operation mode
+ */
+struct m5mols_info {
+	const struct m5mols_platform_data *pdata;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	wait_queue_head_t irq_waitq;
+	atomic_t irq_done;
+
+	struct v4l2_ctrl_handler handle;
+	struct {
+		/* exposure/exposure bias/auto exposure cluster */
+		struct v4l2_ctrl *auto_exposure;
+		struct v4l2_ctrl *exposure_bias;
+		struct v4l2_ctrl *exposure;
+		struct v4l2_ctrl *metering;
+	};
+	struct {
+		/* iso/auto iso cluster */
+		struct v4l2_ctrl *auto_iso;
+		struct v4l2_ctrl *iso;
+	};
+	struct v4l2_ctrl *auto_wb;
+
+	struct v4l2_ctrl *lock_3a;
+	struct v4l2_ctrl *colorfx;
+	struct v4l2_ctrl *saturation;
+	struct v4l2_ctrl *zoom;
+	struct v4l2_ctrl *wdr;
+	struct v4l2_ctrl *stabilization;
+	struct v4l2_ctrl *jpeg_quality;
+
+	int (*set_power)(struct device *dev, int on);
+	struct gpio_desc *reset;
+
+	struct mutex lock;
+
+	struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
+	int res_type;
+
+	struct m5mols_version ver;
+	struct m5mols_capture cap;
+
+	unsigned int isp_ready:1;
+	unsigned int power:1;
+	unsigned int ctrl_sync:1;
+
+	u8 resolution;
+	u8 mode;
+};
+
+#define is_available_af(__info)	(__info->ver.af)
+#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code)
+#define is_manufacturer(__info, __manufacturer)	\
+				(__info->ver.str[0] == __manufacturer[0] && \
+				 __info->ver.str[1] == __manufacturer[1])
+/*
+ * I2C operation of the M-5MOLS
+ *
+ * The I2C read operation of the M-5MOLS requires 2 messages. The first
+ * message sends the information about the command, command category, and total
+ * message size. The second message is used to retrieve the data specified in
+ * the first message
+ *
+ *   1st message                                2nd message
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   | size1 | R | category | cmd | size2 |     | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   - size1: message data size(5 in this case)
+ *   - size2: desired buffer size of the 2nd message
+ *   - d[0..3]: according to size2
+ *
+ * The I2C write operation needs just one message. The message includes
+ * category, command, total size, and desired data.
+ *
+ *   1st message
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   - d[0..3]: according to size1
+ */
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
+
+int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask,
+		     int timeout);
+
+/* Mask value for busy waiting until M-5MOLS I2C interface is initialized */
+#define M5MOLS_I2C_RDY_WAIT_FL		(1 << 16)
+/* ISP state transition timeout, in ms */
+#define M5MOLS_MODE_CHANGE_TIMEOUT	200
+#define M5MOLS_BUSY_WAIT_DEF_TIMEOUT	250
+
+/*
+ * Mode operation of the M-5MOLS
+ *
+ * Changing the mode of the M-5MOLS is needed right executing order.
+ * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed
+ * by user. There are various categories associated with each mode.
+ *
+ * +============================================================+
+ * | mode	| category					|
+ * +============================================================+
+ * | FLASH	| FLASH(only after Stand-by or Power-on)	|
+ * | SYSTEM	| SYSTEM(only after sensor arm-booting)		|
+ * | PARAMETER	| PARAMETER					|
+ * | MONITOR	| MONITOR(preview), Auto Focus, Face Detection	|
+ * | CAPTURE	| Single CAPTURE, Preview(recording)		|
+ * +============================================================+
+ *
+ * The available executing order between each modes are as follows:
+ *   PARAMETER <---> MONITOR <---> CAPTURE
+ */
+int m5mols_set_mode(struct m5mols_info *info, u8 mode);
+
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
+int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout);
+int m5mols_restore_controls(struct m5mols_info *info);
+int m5mols_start_capture(struct m5mols_info *info);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
+int m5mols_lock_3a(struct m5mols_info *info, bool lock);
+int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
+int m5mols_init_controls(struct v4l2_subdev *sd);
+
+/* The firmware function */
+int m5mols_update_fw(struct v4l2_subdev *sd,
+		     int (*set_power)(struct m5mols_info *, bool));
+
+static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev)
+{
+	return container_of(subdev, struct m5mols_info, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	struct m5mols_info *info = container_of(ctrl->handler,
+						struct m5mols_info, handle);
+	return &info->sd;
+}
+
+static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl,
+					unsigned int mode)
+{
+	ctrl->priv = (void *)(uintptr_t)mode;
+}
+
+static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl)
+{
+	return (unsigned int)(uintptr_t)ctrl->priv;
+}
+
+#endif	/* M5MOLS_H */