Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 731 insertions, 0 deletions

diff --git a/drivers/media/pci/cx25821/cx25821-medusa-video.c b/drivers/media/pci/cx25821/cx25821-medusa-video.c
new file mode 100644
index 000000000..f0a1ac77f
--- /dev/null
+++ b/drivers/media/pci/cx25821/cx25821-medusa-video.c
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the Conexant CX25821 PCIe bridge
+ *
+ *  Copyright (C) 2009 Conexant Systems Inc.
+ *  Authors  <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "cx25821.h"
+#include "cx25821-medusa-video.h"
+#include "cx25821-biffuncs.h"
+
+/*
+ * medusa_enable_bluefield_output()
+ *
+ * Enable the generation of blue filed output if no video
+ *
+ */
+static void medusa_enable_bluefield_output(struct cx25821_dev *dev, int channel,
+					   int enable)
+{
+	u32 value = 0;
+	u32 tmp = 0;
+	int out_ctrl = OUT_CTRL1;
+	int out_ctrl_ns = OUT_CTRL_NS;
+
+	switch (channel) {
+	default:
+	case VDEC_A:
+		break;
+	case VDEC_B:
+		out_ctrl = VDEC_B_OUT_CTRL1;
+		out_ctrl_ns = VDEC_B_OUT_CTRL_NS;
+		break;
+	case VDEC_C:
+		out_ctrl = VDEC_C_OUT_CTRL1;
+		out_ctrl_ns = VDEC_C_OUT_CTRL_NS;
+		break;
+	case VDEC_D:
+		out_ctrl = VDEC_D_OUT_CTRL1;
+		out_ctrl_ns = VDEC_D_OUT_CTRL_NS;
+		break;
+	case VDEC_E:
+		out_ctrl = VDEC_E_OUT_CTRL1;
+		out_ctrl_ns = VDEC_E_OUT_CTRL_NS;
+		return;
+	case VDEC_F:
+		out_ctrl = VDEC_F_OUT_CTRL1;
+		out_ctrl_ns = VDEC_F_OUT_CTRL_NS;
+		return;
+	case VDEC_G:
+		out_ctrl = VDEC_G_OUT_CTRL1;
+		out_ctrl_ns = VDEC_G_OUT_CTRL_NS;
+		return;
+	case VDEC_H:
+		out_ctrl = VDEC_H_OUT_CTRL1;
+		out_ctrl_ns = VDEC_H_OUT_CTRL_NS;
+		return;
+	}
+
+	value = cx25821_i2c_read(&dev->i2c_bus[0], out_ctrl, &tmp);
+	value &= 0xFFFFFF7F;	/* clear BLUE_FIELD_EN */
+	if (enable)
+		value |= 0x00000080;	/* set BLUE_FIELD_EN */
+	cx25821_i2c_write(&dev->i2c_bus[0], out_ctrl, value);
+
+	value = cx25821_i2c_read(&dev->i2c_bus[0], out_ctrl_ns, &tmp);
+	value &= 0xFFFFFF7F;
+	if (enable)
+		value |= 0x00000080;	/* set BLUE_FIELD_EN */
+	cx25821_i2c_write(&dev->i2c_bus[0], out_ctrl_ns, value);
+}
+
+static int medusa_initialize_ntsc(struct cx25821_dev *dev)
+{
+	int ret_val = 0;
+	int i = 0;
+	u32 value = 0;
+	u32 tmp = 0;
+
+	for (i = 0; i < MAX_DECODERS; i++) {
+		/* set video format NTSC-M */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				MODE_CTRL + (0x200 * i), &tmp);
+		value &= 0xFFFFFFF0;
+		/* enable the fast locking mode bit[16] */
+		value |= 0x10001;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				MODE_CTRL + (0x200 * i), value);
+
+		/* resolution NTSC 720x480 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				HORIZ_TIM_CTRL + (0x200 * i), &tmp);
+		value &= 0x00C00C00;
+		value |= 0x612D0074;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				HORIZ_TIM_CTRL + (0x200 * i), value);
+
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				VERT_TIM_CTRL + (0x200 * i), &tmp);
+		value &= 0x00C00C00;
+		value |= 0x1C1E001A;	/* vblank_cnt + 2 to get camera ID */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				VERT_TIM_CTRL + (0x200 * i), value);
+
+		/* chroma subcarrier step size */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				SC_STEP_SIZE + (0x200 * i), 0x43E00000);
+
+		/* enable VIP optional active */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				OUT_CTRL_NS + (0x200 * i), &tmp);
+		value &= 0xFFFBFFFF;
+		value |= 0x00040000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				OUT_CTRL_NS + (0x200 * i), value);
+
+		/* enable VIP optional active (VIP_OPT_AL) for direct output. */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				OUT_CTRL1 + (0x200 * i), &tmp);
+		value &= 0xFFFBFFFF;
+		value |= 0x00040000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				OUT_CTRL1 + (0x200 * i), value);
+
+		/*
+		 * clear VPRES_VERT_EN bit, fixes the chroma run away problem
+		 * when the input switching rate < 16 fields
+		*/
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				MISC_TIM_CTRL + (0x200 * i), &tmp);
+		/* disable special play detection */
+		value = setBitAtPos(value, 14);
+		value = clearBitAtPos(value, 15);
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				MISC_TIM_CTRL + (0x200 * i), value);
+
+		/* set vbi_gate_en to 0 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DFE_CTRL1 + (0x200 * i), &tmp);
+		value = clearBitAtPos(value, 29);
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DFE_CTRL1 + (0x200 * i), value);
+
+		/* Enable the generation of blue field output if no video */
+		medusa_enable_bluefield_output(dev, i, 1);
+	}
+
+	for (i = 0; i < MAX_ENCODERS; i++) {
+		/* NTSC hclock */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_1 + (0x100 * i), &tmp);
+		value &= 0xF000FC00;
+		value |= 0x06B402D0;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_1 + (0x100 * i), value);
+
+		/* burst begin and burst end */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_2 + (0x100 * i), &tmp);
+		value &= 0xFF000000;
+		value |= 0x007E9054;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_2 + (0x100 * i), value);
+
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_3 + (0x100 * i), &tmp);
+		value &= 0xFC00FE00;
+		value |= 0x00EC00F0;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_3 + (0x100 * i), value);
+
+		/* set NTSC vblank, no phase alternation, 7.5 IRE pedestal */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_4 + (0x100 * i), &tmp);
+		value &= 0x00FCFFFF;
+		value |= 0x13020000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_4 + (0x100 * i), value);
+
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_5 + (0x100 * i), &tmp);
+		value &= 0xFFFF0000;
+		value |= 0x0000E575;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_5 + (0x100 * i), value);
+
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_6 + (0x100 * i), 0x009A89C1);
+
+		/* Subcarrier Increment */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_7 + (0x100 * i), 0x21F07C1F);
+	}
+
+	/* set picture resolutions */
+	/* 0 - 720 */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], HSCALE_CTRL, 0x0);
+	/* 0 - 480 */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], VSCALE_CTRL, 0x0);
+
+	/* set Bypass input format to NTSC 525 lines */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp);
+	value |= 0x00080200;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value);
+
+	return ret_val;
+}
+
+static int medusa_PALCombInit(struct cx25821_dev *dev, int dec)
+{
+	int ret_val = -1;
+	u32 value = 0, tmp = 0;
+
+	/* Setup for 2D threshold */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_2D_HFS_CFG + (0x200 * dec), 0x20002861);
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_2D_HFD_CFG + (0x200 * dec), 0x20002861);
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_2D_LF_CFG + (0x200 * dec), 0x200A1023);
+
+	/* Setup flat chroma and luma thresholds */
+	value = cx25821_i2c_read(&dev->i2c_bus[0],
+			COMB_FLAT_THRESH_CTRL + (0x200 * dec), &tmp);
+	value &= 0x06230000;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_FLAT_THRESH_CTRL + (0x200 * dec), value);
+
+	/* set comb 2D blend */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_2D_BLEND + (0x200 * dec), 0x210F0F0F);
+
+	/* COMB MISC CONTROL */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+			COMB_MISC_CTRL + (0x200 * dec), 0x41120A7F);
+
+	return ret_val;
+}
+
+static int medusa_initialize_pal(struct cx25821_dev *dev)
+{
+	int ret_val = 0;
+	int i = 0;
+	u32 value = 0;
+	u32 tmp = 0;
+
+	for (i = 0; i < MAX_DECODERS; i++) {
+		/* set video format PAL-BDGHI */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				MODE_CTRL + (0x200 * i), &tmp);
+		value &= 0xFFFFFFF0;
+		/* enable the fast locking mode bit[16] */
+		value |= 0x10004;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				MODE_CTRL + (0x200 * i), value);
+
+		/* resolution PAL 720x576 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				HORIZ_TIM_CTRL + (0x200 * i), &tmp);
+		value &= 0x00C00C00;
+		value |= 0x632D007D;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				HORIZ_TIM_CTRL + (0x200 * i), value);
+
+		/* vblank656_cnt=x26, vactive_cnt=240h, vblank_cnt=x24 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				VERT_TIM_CTRL + (0x200 * i), &tmp);
+		value &= 0x00C00C00;
+		value |= 0x28240026;	/* vblank_cnt + 2 to get camera ID */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				VERT_TIM_CTRL + (0x200 * i), value);
+
+		/* chroma subcarrier step size */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				SC_STEP_SIZE + (0x200 * i), 0x5411E2D0);
+
+		/* enable VIP optional active */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				OUT_CTRL_NS + (0x200 * i), &tmp);
+		value &= 0xFFFBFFFF;
+		value |= 0x00040000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				OUT_CTRL_NS + (0x200 * i), value);
+
+		/* enable VIP optional active (VIP_OPT_AL) for direct output. */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				OUT_CTRL1 + (0x200 * i), &tmp);
+		value &= 0xFFFBFFFF;
+		value |= 0x00040000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				OUT_CTRL1 + (0x200 * i), value);
+
+		/*
+		 * clear VPRES_VERT_EN bit, fixes the chroma run away problem
+		 * when the input switching rate < 16 fields
+		 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				MISC_TIM_CTRL + (0x200 * i), &tmp);
+		/* disable special play detection */
+		value = setBitAtPos(value, 14);
+		value = clearBitAtPos(value, 15);
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				MISC_TIM_CTRL + (0x200 * i), value);
+
+		/* set vbi_gate_en to 0 */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DFE_CTRL1 + (0x200 * i), &tmp);
+		value = clearBitAtPos(value, 29);
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DFE_CTRL1 + (0x200 * i), value);
+
+		medusa_PALCombInit(dev, i);
+
+		/* Enable the generation of blue field output if no video */
+		medusa_enable_bluefield_output(dev, i, 1);
+	}
+
+	for (i = 0; i < MAX_ENCODERS; i++) {
+		/* PAL hclock */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_1 + (0x100 * i), &tmp);
+		value &= 0xF000FC00;
+		value |= 0x06C002D0;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_1 + (0x100 * i), value);
+
+		/* burst begin and burst end */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_2 + (0x100 * i), &tmp);
+		value &= 0xFF000000;
+		value |= 0x007E9754;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_2 + (0x100 * i), value);
+
+		/* hblank and vactive */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_3 + (0x100 * i), &tmp);
+		value &= 0xFC00FE00;
+		value |= 0x00FC0120;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_3 + (0x100 * i), value);
+
+		/* set PAL vblank, phase alternation, 0 IRE pedestal */
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_4 + (0x100 * i), &tmp);
+		value &= 0x00FCFFFF;
+		value |= 0x14010000;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_4 + (0x100 * i), value);
+
+		value = cx25821_i2c_read(&dev->i2c_bus[0],
+				DENC_A_REG_5 + (0x100 * i), &tmp);
+		value &= 0xFFFF0000;
+		value |= 0x0000F078;
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_5 + (0x100 * i), value);
+
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_6 + (0x100 * i), 0x00A493CF);
+
+		/* Subcarrier Increment */
+		ret_val = cx25821_i2c_write(&dev->i2c_bus[0],
+				DENC_A_REG_7 + (0x100 * i), 0x2A098ACB);
+	}
+
+	/* set picture resolutions */
+	/* 0 - 720 */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], HSCALE_CTRL, 0x0);
+	/* 0 - 576 */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], VSCALE_CTRL, 0x0);
+
+	/* set Bypass input format to PAL 625 lines */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp);
+	value &= 0xFFF7FDFF;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value);
+
+	return ret_val;
+}
+
+int medusa_set_videostandard(struct cx25821_dev *dev)
+{
+	int status = 0;
+	u32 value = 0, tmp = 0;
+
+	if (dev->tvnorm & V4L2_STD_PAL_BG || dev->tvnorm & V4L2_STD_PAL_DK)
+		status = medusa_initialize_pal(dev);
+	else
+		status = medusa_initialize_ntsc(dev);
+
+	/* Enable DENC_A output */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_A_REG_4, &tmp);
+	value = setBitAtPos(value, 4);
+	status = cx25821_i2c_write(&dev->i2c_bus[0], DENC_A_REG_4, value);
+
+	/* Enable DENC_B output */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_B_REG_4, &tmp);
+	value = setBitAtPos(value, 4);
+	status = cx25821_i2c_write(&dev->i2c_bus[0], DENC_B_REG_4, value);
+
+	return status;
+}
+
+void medusa_set_resolution(struct cx25821_dev *dev, int width,
+			   int decoder_select)
+{
+	int decoder = 0;
+	int decoder_count = 0;
+	u32 hscale = 0x0;
+	u32 vscale = 0x0;
+	const int MAX_WIDTH = 720;
+
+	/* validate the width */
+	if (width > MAX_WIDTH) {
+		pr_info("%s(): width %d > MAX_WIDTH %d ! resetting to MAX_WIDTH\n",
+			__func__, width, MAX_WIDTH);
+		width = MAX_WIDTH;
+	}
+
+	if (decoder_select <= 7 && decoder_select >= 0) {
+		decoder = decoder_select;
+		decoder_count = decoder_select + 1;
+	} else {
+		decoder = 0;
+		decoder_count = dev->_max_num_decoders;
+	}
+
+	switch (width) {
+	case 320:
+		hscale = 0x13E34B;
+		vscale = 0x0;
+		break;
+
+	case 352:
+		hscale = 0x10A273;
+		vscale = 0x0;
+		break;
+
+	case 176:
+		hscale = 0x3115B2;
+		vscale = 0x1E00;
+		break;
+
+	case 160:
+		hscale = 0x378D84;
+		vscale = 0x1E00;
+		break;
+
+	default:		/* 720 */
+		hscale = 0x0;
+		vscale = 0x0;
+		break;
+	}
+
+	for (; decoder < decoder_count; decoder++) {
+		/* write scaling values for each decoder */
+		cx25821_i2c_write(&dev->i2c_bus[0],
+				HSCALE_CTRL + (0x200 * decoder), hscale);
+		cx25821_i2c_write(&dev->i2c_bus[0],
+				VSCALE_CTRL + (0x200 * decoder), vscale);
+	}
+}
+
+static void medusa_set_decoderduration(struct cx25821_dev *dev, int decoder,
+				       int duration)
+{
+	u32 fld_cnt = 0;
+	u32 tmp = 0;
+	u32 disp_cnt_reg = DISP_AB_CNT;
+
+	/* no support */
+	if (decoder < VDEC_A || decoder > VDEC_H) {
+		return;
+	}
+
+	switch (decoder) {
+	default:
+		break;
+	case VDEC_C:
+	case VDEC_D:
+		disp_cnt_reg = DISP_CD_CNT;
+		break;
+	case VDEC_E:
+	case VDEC_F:
+		disp_cnt_reg = DISP_EF_CNT;
+		break;
+	case VDEC_G:
+	case VDEC_H:
+		disp_cnt_reg = DISP_GH_CNT;
+		break;
+	}
+
+	/* update hardware */
+	fld_cnt = cx25821_i2c_read(&dev->i2c_bus[0], disp_cnt_reg, &tmp);
+
+	if (!(decoder % 2)) {	/* EVEN decoder */
+		fld_cnt &= 0xFFFF0000;
+		fld_cnt |= duration;
+	} else {
+		fld_cnt &= 0x0000FFFF;
+		fld_cnt |= ((u32) duration) << 16;
+	}
+
+	cx25821_i2c_write(&dev->i2c_bus[0], disp_cnt_reg, fld_cnt);
+}
+
+/* Map to Medusa register setting */
+static int mapM(int srcMin, int srcMax, int srcVal, int dstMin, int dstMax,
+		int *dstVal)
+{
+	int numerator;
+	int denominator;
+	int quotient;
+
+	if ((srcMin == srcMax) || (srcVal < srcMin) || (srcVal > srcMax))
+		return -1;
+	/*
+	 * This is the overall expression used:
+	 * *dstVal =
+	 *   (srcVal - srcMin)*(dstMax - dstMin) / (srcMax - srcMin) + dstMin;
+	 * but we need to account for rounding so below we use the modulus
+	 * operator to find the remainder and increment if necessary.
+	 */
+	numerator = (srcVal - srcMin) * (dstMax - dstMin);
+	denominator = srcMax - srcMin;
+	quotient = numerator / denominator;
+
+	if (2 * (numerator % denominator) >= denominator)
+		quotient++;
+
+	*dstVal = quotient + dstMin;
+
+	return 0;
+}
+
+static unsigned long convert_to_twos(long numeric, unsigned long bits_len)
+{
+	unsigned char temp;
+
+	if (numeric >= 0)
+		return numeric;
+	else {
+		temp = ~(abs(numeric) & 0xFF);
+		temp += 1;
+		return temp;
+	}
+}
+
+int medusa_set_brightness(struct cx25821_dev *dev, int brightness, int decoder)
+{
+	int ret_val = 0;
+	int value = 0;
+	u32 val = 0, tmp = 0;
+
+	if ((brightness > VIDEO_PROCAMP_MAX) ||
+	    (brightness < VIDEO_PROCAMP_MIN)) {
+		return -1;
+	}
+	ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, brightness,
+			SIGNED_BYTE_MIN, SIGNED_BYTE_MAX, &value);
+	value = convert_to_twos(value, 8);
+	val = cx25821_i2c_read(&dev->i2c_bus[0],
+			VDEC_A_BRITE_CTRL + (0x200 * decoder), &tmp);
+	val &= 0xFFFFFF00;
+	ret_val |= cx25821_i2c_write(&dev->i2c_bus[0],
+			VDEC_A_BRITE_CTRL + (0x200 * decoder), val | value);
+	return ret_val;
+}
+
+int medusa_set_contrast(struct cx25821_dev *dev, int contrast, int decoder)
+{
+	int ret_val = 0;
+	int value = 0;
+	u32 val = 0, tmp = 0;
+
+	if ((contrast > VIDEO_PROCAMP_MAX) || (contrast < VIDEO_PROCAMP_MIN)) {
+		return -1;
+	}
+
+	ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, contrast,
+			UNSIGNED_BYTE_MIN, UNSIGNED_BYTE_MAX, &value);
+	val = cx25821_i2c_read(&dev->i2c_bus[0],
+			VDEC_A_CNTRST_CTRL + (0x200 * decoder), &tmp);
+	val &= 0xFFFFFF00;
+	ret_val |= cx25821_i2c_write(&dev->i2c_bus[0],
+			VDEC_A_CNTRST_CTRL + (0x200 * decoder), val | value);
+
+	return ret_val;
+}
+
+int medusa_set_hue(struct cx25821_dev *dev, int hue, int decoder)
+{
+	int ret_val = 0;
+	int value = 0;
+	u32 val = 0, tmp = 0;
+
+	if ((hue > VIDEO_PROCAMP_MAX) || (hue < VIDEO_PROCAMP_MIN)) {
+		return -1;
+	}
+
+	ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, hue,
+			SIGNED_BYTE_MIN, SIGNED_BYTE_MAX, &value);
+
+	value = convert_to_twos(value, 8);
+	val = cx25821_i2c_read(&dev->i2c_bus[0],
+			VDEC_A_HUE_CTRL + (0x200 * decoder), &tmp);
+	val &= 0xFFFFFF00;
+
+	ret_val |= cx25821_i2c_write(&dev->i2c_bus[0],
+			VDEC_A_HUE_CTRL + (0x200 * decoder), val | value);
+
+	return ret_val;
+}
+
+int medusa_set_saturation(struct cx25821_dev *dev, int saturation, int decoder)
+{
+	int ret_val = 0;
+	int value = 0;
+	u32 val = 0, tmp = 0;
+
+	if ((saturation > VIDEO_PROCAMP_MAX) ||
+	    (saturation < VIDEO_PROCAMP_MIN)) {
+		return -1;
+	}
+
+	ret_val = mapM(VIDEO_PROCAMP_MIN, VIDEO_PROCAMP_MAX, saturation,
+			UNSIGNED_BYTE_MIN, UNSIGNED_BYTE_MAX, &value);
+
+	val = cx25821_i2c_read(&dev->i2c_bus[0],
+			VDEC_A_USAT_CTRL + (0x200 * decoder), &tmp);
+	val &= 0xFFFFFF00;
+	ret_val |= cx25821_i2c_write(&dev->i2c_bus[0],
+			VDEC_A_USAT_CTRL + (0x200 * decoder), val | value);
+
+	val = cx25821_i2c_read(&dev->i2c_bus[0],
+			VDEC_A_VSAT_CTRL + (0x200 * decoder), &tmp);
+	val &= 0xFFFFFF00;
+	ret_val |= cx25821_i2c_write(&dev->i2c_bus[0],
+			VDEC_A_VSAT_CTRL + (0x200 * decoder), val | value);
+
+	return ret_val;
+}
+
+/* Program the display sequence and monitor output. */
+
+int medusa_video_init(struct cx25821_dev *dev)
+{
+	u32 value = 0, tmp = 0;
+	int ret_val = 0;
+	int i = 0;
+
+	/* disable Auto source selection on all video decoders */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp);
+	value &= 0xFFFFF0FF;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value);
+
+	if (ret_val < 0)
+		goto error;
+
+	/* Turn off Master source switch enable */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp);
+	value &= 0xFFFFFFDF;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value);
+
+	if (ret_val < 0)
+		goto error;
+
+	/*
+	 * FIXME: due to a coding bug the duration was always 0. It's
+	 * likely that it really should be something else, but due to the
+	 * lack of documentation I have no idea what it should be. For
+	 * now just fill in 0 as the duration.
+	 */
+	for (i = 0; i < dev->_max_num_decoders; i++)
+		medusa_set_decoderduration(dev, i, 0);
+
+	/* Select monitor as DENC A input, power up the DAC */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_AB_CTRL, &tmp);
+	value &= 0xFF70FF70;
+	value |= 0x00090008;	/* set en_active */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], DENC_AB_CTRL, value);
+
+	if (ret_val < 0)
+		goto error;
+
+	/* enable input is VIP/656 */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp);
+	value |= 0x00040100;	/* enable VIP */
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value);
+
+	if (ret_val < 0)
+		goto error;
+
+	/* select AFE clock to output mode */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, &tmp);
+	value &= 0x83FFFFFF;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL,
+			value | 0x10000000);
+
+	if (ret_val < 0)
+		goto error;
+
+	/* Turn on all of the data out and control output pins. */
+	value = cx25821_i2c_read(&dev->i2c_bus[0], PIN_OE_CTRL, &tmp);
+	value &= 0xFEF0FE00;
+	if (dev->_max_num_decoders == MAX_DECODERS) {
+		/*
+		 * Note: The octal board does not support control pins(bit16-19)
+		 * These bits are ignored in the octal board.
+		 *
+		 * disable VDEC A-C port, default to Mobilygen Interface
+		 */
+		value |= 0x010001F8;
+	} else {
+		/* disable VDEC A-C port, default to Mobilygen Interface */
+		value |= 0x010F0108;
+	}
+
+	value |= 7;
+	ret_val = cx25821_i2c_write(&dev->i2c_bus[0], PIN_OE_CTRL, value);
+
+	if (ret_val < 0)
+		goto error;
+
+	ret_val = medusa_set_videostandard(dev);
+
+error:
+	return ret_val;
+}