Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 405 insertions, 0 deletions

diff --git a/drivers/media/platform/ti/omap3isp/isph3a_af.c b/drivers/media/platform/ti/omap3isp/isph3a_af.c
new file mode 100644
index 000000000..de7b116d0
--- /dev/null
+++ b/drivers/media/platform/ti/omap3isp/isph3a_af.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * isph3a_af.c
+ *
+ * TI OMAP3 ISP - H3A AF module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <dacohen@gmail.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ */
+
+/* Linux specific include files */
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include "isp.h"
+#include "isph3a.h"
+#include "ispstat.h"
+
+#define IS_OUT_OF_BOUNDS(value, min, max)		\
+	((((unsigned int)value) < (min)) || (((unsigned int)value) > (max)))
+
+static void h3a_af_setup_regs(struct ispstat *af, void *priv)
+{
+	struct omap3isp_h3a_af_config *conf = priv;
+	u32 pcr;
+	u32 pax1;
+	u32 pax2;
+	u32 paxstart;
+	u32 coef;
+	u32 base_coef_set0;
+	u32 base_coef_set1;
+	int index;
+
+	if (af->state == ISPSTAT_DISABLED)
+		return;
+
+	isp_reg_writel(af->isp, af->active_buf->dma_addr, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AFBUFST);
+
+	if (!af->update)
+		return;
+
+	/* Configure Hardware Registers */
+	pax1 = ((conf->paxel.width >> 1) - 1) << AF_PAXW_SHIFT;
+	/* Set height in AFPAX1 */
+	pax1 |= (conf->paxel.height >> 1) - 1;
+	isp_reg_writel(af->isp, pax1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX1);
+
+	/* Configure AFPAX2 Register */
+	/* Set Line Increment in AFPAX2 Register */
+	pax2 = ((conf->paxel.line_inc >> 1) - 1) << AF_LINE_INCR_SHIFT;
+	/* Set Vertical Count */
+	pax2 |= (conf->paxel.v_cnt - 1) << AF_VT_COUNT_SHIFT;
+	/* Set Horizontal Count */
+	pax2 |= (conf->paxel.h_cnt - 1);
+	isp_reg_writel(af->isp, pax2, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX2);
+
+	/* Configure PAXSTART Register */
+	/*Configure Horizontal Start */
+	paxstart = conf->paxel.h_start << AF_HZ_START_SHIFT;
+	/* Configure Vertical Start */
+	paxstart |= conf->paxel.v_start;
+	isp_reg_writel(af->isp, paxstart, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AFPAXSTART);
+
+	/*SetIIRSH Register */
+	isp_reg_writel(af->isp, conf->iir.h_start,
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFIIRSH);
+
+	base_coef_set0 = ISPH3A_AFCOEF010;
+	base_coef_set1 = ISPH3A_AFCOEF110;
+	for (index = 0; index <= 8; index += 2) {
+		/*Set IIR Filter0 Coefficients */
+		coef = 0;
+		coef |= conf->iir.coeff_set0[index];
+		coef |= conf->iir.coeff_set0[index + 1] <<
+			AF_COEF_SHIFT;
+		isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A,
+			       base_coef_set0);
+		base_coef_set0 += AFCOEF_OFFSET;
+
+		/*Set IIR Filter1 Coefficients */
+		coef = 0;
+		coef |= conf->iir.coeff_set1[index];
+		coef |= conf->iir.coeff_set1[index + 1] <<
+			AF_COEF_SHIFT;
+		isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A,
+			       base_coef_set1);
+		base_coef_set1 += AFCOEF_OFFSET;
+	}
+	/* set AFCOEF0010 Register */
+	isp_reg_writel(af->isp, conf->iir.coeff_set0[10],
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF0010);
+	/* set AFCOEF1010 Register */
+	isp_reg_writel(af->isp, conf->iir.coeff_set1[10],
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF1010);
+
+	/* PCR Register */
+	/* Set RGB Position */
+	pcr = conf->rgb_pos << AF_RGBPOS_SHIFT;
+	/* Set Accumulator Mode */
+	if (conf->fvmode == OMAP3ISP_AF_MODE_PEAK)
+		pcr |= AF_FVMODE;
+	/* Set A-law */
+	if (conf->alaw_enable)
+		pcr |= AF_ALAW_EN;
+	/* HMF Configurations */
+	if (conf->hmf.enable) {
+		/* Enable HMF */
+		pcr |= AF_MED_EN;
+		/* Set Median Threshold */
+		pcr |= conf->hmf.threshold << AF_MED_TH_SHIFT;
+	}
+	/* Set PCR Register */
+	isp_reg_clr_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			AF_PCR_MASK, pcr);
+
+	af->update = 0;
+	af->config_counter += af->inc_config;
+	af->inc_config = 0;
+	af->buf_size = conf->buf_size;
+}
+
+static void h3a_af_enable(struct ispstat *af, int enable)
+{
+	if (enable) {
+		isp_reg_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AF_EN);
+		omap3isp_subclk_enable(af->isp, OMAP3_ISP_SUBCLK_AF);
+	} else {
+		isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AF_EN);
+		omap3isp_subclk_disable(af->isp, OMAP3_ISP_SUBCLK_AF);
+	}
+}
+
+static int h3a_af_busy(struct ispstat *af)
+{
+	return isp_reg_readl(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR)
+						& ISPH3A_PCR_BUSYAF;
+}
+
+static u32 h3a_af_get_buf_size(struct omap3isp_h3a_af_config *conf)
+{
+	return conf->paxel.h_cnt * conf->paxel.v_cnt * OMAP3ISP_AF_PAXEL_SIZE;
+}
+
+/* Function to check paxel parameters */
+static int h3a_af_validate_params(struct ispstat *af, void *new_conf)
+{
+	struct omap3isp_h3a_af_config *user_cfg = new_conf;
+	struct omap3isp_h3a_af_paxel *paxel_cfg = &user_cfg->paxel;
+	struct omap3isp_h3a_af_iir *iir_cfg = &user_cfg->iir;
+	int index;
+	u32 buf_size;
+
+	/* Check horizontal Count */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->h_cnt,
+			     OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN,
+			     OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX))
+		return -EINVAL;
+
+	/* Check Vertical Count */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->v_cnt,
+			     OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN,
+			     OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX))
+		return -EINVAL;
+
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->height, OMAP3ISP_AF_PAXEL_HEIGHT_MIN,
+			     OMAP3ISP_AF_PAXEL_HEIGHT_MAX) ||
+	    paxel_cfg->height % 2)
+		return -EINVAL;
+
+	/* Check width */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->width, OMAP3ISP_AF_PAXEL_WIDTH_MIN,
+			     OMAP3ISP_AF_PAXEL_WIDTH_MAX) ||
+	    paxel_cfg->width % 2)
+		return -EINVAL;
+
+	/* Check Line Increment */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->line_inc,
+			     OMAP3ISP_AF_PAXEL_INCREMENT_MIN,
+			     OMAP3ISP_AF_PAXEL_INCREMENT_MAX) ||
+	    paxel_cfg->line_inc % 2)
+		return -EINVAL;
+
+	/* Check Horizontal Start */
+	if ((paxel_cfg->h_start < iir_cfg->h_start) ||
+	    IS_OUT_OF_BOUNDS(paxel_cfg->h_start,
+			     OMAP3ISP_AF_PAXEL_HZSTART_MIN,
+			     OMAP3ISP_AF_PAXEL_HZSTART_MAX))
+		return -EINVAL;
+
+	/* Check IIR */
+	for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) {
+		if ((iir_cfg->coeff_set0[index]) > OMAP3ISP_AF_COEF_MAX)
+			return -EINVAL;
+
+		if ((iir_cfg->coeff_set1[index]) > OMAP3ISP_AF_COEF_MAX)
+			return -EINVAL;
+	}
+
+	if (IS_OUT_OF_BOUNDS(iir_cfg->h_start, OMAP3ISP_AF_IIRSH_MIN,
+			     OMAP3ISP_AF_IIRSH_MAX))
+		return -EINVAL;
+
+	/* Hack: If paxel size is 12, the 10th AF window may be corrupted */
+	if ((paxel_cfg->h_cnt * paxel_cfg->v_cnt > 9) &&
+	    (paxel_cfg->width * paxel_cfg->height == 12))
+		return -EINVAL;
+
+	buf_size = h3a_af_get_buf_size(user_cfg);
+	if (buf_size > user_cfg->buf_size)
+		/* User buf_size request wasn't enough */
+		user_cfg->buf_size = buf_size;
+	else if (user_cfg->buf_size > OMAP3ISP_AF_MAX_BUF_SIZE)
+		user_cfg->buf_size = OMAP3ISP_AF_MAX_BUF_SIZE;
+
+	return 0;
+}
+
+/* Update local parameters */
+static void h3a_af_set_params(struct ispstat *af, void *new_conf)
+{
+	struct omap3isp_h3a_af_config *user_cfg = new_conf;
+	struct omap3isp_h3a_af_config *cur_cfg = af->priv;
+	int update = 0;
+	int index;
+
+	/* alaw */
+	if (cur_cfg->alaw_enable != user_cfg->alaw_enable) {
+		update = 1;
+		goto out;
+	}
+
+	/* hmf */
+	if (cur_cfg->hmf.enable != user_cfg->hmf.enable) {
+		update = 1;
+		goto out;
+	}
+	if (cur_cfg->hmf.threshold != user_cfg->hmf.threshold) {
+		update = 1;
+		goto out;
+	}
+
+	/* rgbpos */
+	if (cur_cfg->rgb_pos != user_cfg->rgb_pos) {
+		update = 1;
+		goto out;
+	}
+
+	/* iir */
+	if (cur_cfg->iir.h_start != user_cfg->iir.h_start) {
+		update = 1;
+		goto out;
+	}
+	for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) {
+		if (cur_cfg->iir.coeff_set0[index] !=
+				user_cfg->iir.coeff_set0[index]) {
+			update = 1;
+			goto out;
+		}
+		if (cur_cfg->iir.coeff_set1[index] !=
+				user_cfg->iir.coeff_set1[index]) {
+			update = 1;
+			goto out;
+		}
+	}
+
+	/* paxel */
+	if ((cur_cfg->paxel.width != user_cfg->paxel.width) ||
+	    (cur_cfg->paxel.height != user_cfg->paxel.height) ||
+	    (cur_cfg->paxel.h_start != user_cfg->paxel.h_start) ||
+	    (cur_cfg->paxel.v_start != user_cfg->paxel.v_start) ||
+	    (cur_cfg->paxel.h_cnt != user_cfg->paxel.h_cnt) ||
+	    (cur_cfg->paxel.v_cnt != user_cfg->paxel.v_cnt) ||
+	    (cur_cfg->paxel.line_inc != user_cfg->paxel.line_inc)) {
+		update = 1;
+		goto out;
+	}
+
+	/* af_mode */
+	if (cur_cfg->fvmode != user_cfg->fvmode)
+		update = 1;
+
+out:
+	if (update || !af->configured) {
+		memcpy(cur_cfg, user_cfg, sizeof(*cur_cfg));
+		af->inc_config++;
+		af->update = 1;
+		/*
+		 * User might be asked for a bigger buffer than necessary for
+		 * this configuration. In order to return the right amount of
+		 * data during buffer request, let's calculate the size here
+		 * instead of stick with user_cfg->buf_size.
+		 */
+		cur_cfg->buf_size = h3a_af_get_buf_size(cur_cfg);
+	}
+}
+
+static long h3a_af_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_AF_CFG:
+		return omap3isp_stat_config(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_REQ:
+		return omap3isp_stat_request_statistics(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_REQ_TIME32:
+		return omap3isp_stat_request_statistics_time32(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_EN: {
+		int *en = arg;
+		return omap3isp_stat_enable(stat, !!*en);
+	}
+	}
+
+	return -ENOIOCTLCMD;
+
+}
+
+static const struct ispstat_ops h3a_af_ops = {
+	.validate_params	= h3a_af_validate_params,
+	.set_params		= h3a_af_set_params,
+	.setup_regs		= h3a_af_setup_regs,
+	.enable			= h3a_af_enable,
+	.busy			= h3a_af_busy,
+};
+
+static const struct v4l2_subdev_core_ops h3a_af_subdev_core_ops = {
+	.ioctl = h3a_af_ioctl,
+	.subscribe_event = omap3isp_stat_subscribe_event,
+	.unsubscribe_event = omap3isp_stat_unsubscribe_event,
+};
+
+static const struct v4l2_subdev_video_ops h3a_af_subdev_video_ops = {
+	.s_stream = omap3isp_stat_s_stream,
+};
+
+static const struct v4l2_subdev_ops h3a_af_subdev_ops = {
+	.core = &h3a_af_subdev_core_ops,
+	.video = &h3a_af_subdev_video_ops,
+};
+
+/* Function to register the AF character device driver. */
+int omap3isp_h3a_af_init(struct isp_device *isp)
+{
+	struct ispstat *af = &isp->isp_af;
+	struct omap3isp_h3a_af_config *af_cfg;
+	struct omap3isp_h3a_af_config *af_recover_cfg = NULL;
+	int ret;
+
+	af_cfg = kzalloc(sizeof(*af_cfg), GFP_KERNEL);
+	if (af_cfg == NULL)
+		return -ENOMEM;
+
+	af->ops = &h3a_af_ops;
+	af->priv = af_cfg;
+	af->event_type = V4L2_EVENT_OMAP3ISP_AF;
+	af->isp = isp;
+
+	/* Set recover state configuration */
+	af_recover_cfg = kzalloc(sizeof(*af_recover_cfg), GFP_KERNEL);
+	if (!af_recover_cfg) {
+		dev_err(af->isp->dev,
+			"AF: cannot allocate memory for recover configuration.\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	af_recover_cfg->paxel.h_start = OMAP3ISP_AF_PAXEL_HZSTART_MIN;
+	af_recover_cfg->paxel.width = OMAP3ISP_AF_PAXEL_WIDTH_MIN;
+	af_recover_cfg->paxel.height = OMAP3ISP_AF_PAXEL_HEIGHT_MIN;
+	af_recover_cfg->paxel.h_cnt = OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN;
+	af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN;
+	af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN;
+	if (h3a_af_validate_params(af, af_recover_cfg)) {
+		dev_err(af->isp->dev,
+			"AF: recover configuration is invalid.\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	af_recover_cfg->buf_size = h3a_af_get_buf_size(af_recover_cfg);
+	af->recover_priv = af_recover_cfg;
+
+	ret = omap3isp_stat_init(af, "AF", &h3a_af_subdev_ops);
+
+err:
+	if (ret) {
+		kfree(af_cfg);
+		kfree(af_recover_cfg);
+	}
+
+	return ret;
+}
+
+void omap3isp_h3a_af_cleanup(struct isp_device *isp)
+{
+	omap3isp_stat_cleanup(&isp->isp_af);
+}