Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 457 insertions, 0 deletions

diff --git a/drivers/media/tuners/it913x.c b/drivers/media/tuners/it913x.c
new file mode 100644
index 000000000..7696a28fe
--- /dev/null
+++ b/drivers/media/tuners/it913x.c
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ITE IT913X silicon tuner driver
+ *
+ *  Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com)
+ *  IT9137 Copyright (C) ITE Tech Inc.
+ */
+
+#include "it913x.h"
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct it913x_dev {
+	struct platform_device *pdev;
+	struct regmap *regmap;
+	struct dvb_frontend *fe;
+	u8 chip_ver:2;
+	u8 role:2;
+	u16 xtal;
+	u8 fdiv;
+	u8 clk_mode;
+	u32 fn_min;
+	bool active;
+};
+
+static int it913x_init(struct dvb_frontend *fe)
+{
+	struct it913x_dev *dev = fe->tuner_priv;
+	struct platform_device *pdev = dev->pdev;
+	int ret;
+	unsigned int utmp;
+	u8 iqik_m_cal, nv_val, buf[2];
+	static const u8 nv[] = {48, 32, 24, 16, 12, 8, 6, 4, 2};
+	unsigned long timeout;
+
+	dev_dbg(&pdev->dev, "role %u\n", dev->role);
+
+	ret = regmap_write(dev->regmap, 0x80ec4c, 0x68);
+	if (ret)
+		goto err;
+
+	usleep_range(10000, 100000);
+
+	ret = regmap_read(dev->regmap, 0x80ec86, &utmp);
+	if (ret)
+		goto err;
+
+	switch (utmp) {
+	case 0:
+		/* 12.000 MHz */
+		dev->clk_mode = utmp;
+		dev->xtal = 2000;
+		dev->fdiv = 3;
+		iqik_m_cal = 16;
+		break;
+	case 1:
+		/* 20.480 MHz */
+		dev->clk_mode = utmp;
+		dev->xtal = 640;
+		dev->fdiv = 1;
+		iqik_m_cal = 6;
+		break;
+	default:
+		dev_err(&pdev->dev, "unknown clock identifier %d\n", utmp);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = regmap_read(dev->regmap, 0x80ed03,  &utmp);
+	if (ret)
+		goto err;
+
+	else if (utmp < ARRAY_SIZE(nv))
+		nv_val = nv[utmp];
+	else
+		nv_val = 2;
+
+	#define TIMEOUT 50
+	timeout = jiffies + msecs_to_jiffies(TIMEOUT);
+	while (!time_after(jiffies, timeout)) {
+		ret = regmap_bulk_read(dev->regmap, 0x80ed23, buf, 2);
+		if (ret)
+			goto err;
+
+		utmp = (buf[1] << 8) | (buf[0] << 0);
+		if (utmp)
+			break;
+	}
+
+	dev_dbg(&pdev->dev, "r_fbc_m_bdry took %u ms, val %u\n",
+			jiffies_to_msecs(jiffies) -
+			(jiffies_to_msecs(timeout) - TIMEOUT), utmp);
+
+	dev->fn_min = dev->xtal * utmp;
+	dev->fn_min /= (dev->fdiv * nv_val);
+	dev->fn_min *= 1000;
+	dev_dbg(&pdev->dev, "fn_min %u\n", dev->fn_min);
+
+	/*
+	 * Chip version BX never sets that flag so we just wait 50ms in that
+	 * case. It is possible poll BX similarly than AX and then timeout in
+	 * order to get 50ms delay, but that causes about 120 extra I2C
+	 * messages. As for now, we just wait and reduce IO.
+	 */
+	if (dev->chip_ver == 1) {
+		#define TIMEOUT 50
+		timeout = jiffies + msecs_to_jiffies(TIMEOUT);
+		while (!time_after(jiffies, timeout)) {
+			ret = regmap_read(dev->regmap, 0x80ec82, &utmp);
+			if (ret)
+				goto err;
+
+			if (utmp)
+				break;
+		}
+
+		dev_dbg(&pdev->dev, "p_tsm_init_mode took %u ms, val %u\n",
+				jiffies_to_msecs(jiffies) -
+				(jiffies_to_msecs(timeout) - TIMEOUT), utmp);
+	} else {
+		msleep(50);
+	}
+
+	ret = regmap_write(dev->regmap, 0x80ed81, iqik_m_cal);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80ec57, 0x00);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80ec58, 0x00);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80ec40, 0x01);
+	if (ret)
+		goto err;
+
+	dev->active = true;
+
+	return 0;
+err:
+	dev_dbg(&pdev->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int it913x_sleep(struct dvb_frontend *fe)
+{
+	struct it913x_dev *dev = fe->tuner_priv;
+	struct platform_device *pdev = dev->pdev;
+	int ret, len;
+
+	dev_dbg(&pdev->dev, "role %u\n", dev->role);
+
+	dev->active = false;
+
+	ret  = regmap_bulk_write(dev->regmap, 0x80ec40, "\x00", 1);
+	if (ret)
+		goto err;
+
+	/*
+	 * Writing '0x00' to master tuner register '0x80ec08' causes slave tuner
+	 * communication lost. Due to that, we cannot put master full sleep.
+	 */
+	if (dev->role == IT913X_ROLE_DUAL_MASTER)
+		len = 4;
+	else
+		len = 15;
+
+	dev_dbg(&pdev->dev, "role %u, len %d\n", dev->role, len);
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec02,
+			"\x3f\x1f\x3f\x3e\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+			len);
+	if (ret)
+		goto err;
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec12, "\x00\x00\x00\x00", 4);
+	if (ret)
+		goto err;
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec17,
+			"\x00\x00\x00\x00\x00\x00\x00\x00\x00", 9);
+	if (ret)
+		goto err;
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec22,
+			"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 10);
+	if (ret)
+		goto err;
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec20, "\x00", 1);
+	if (ret)
+		goto err;
+
+	ret = regmap_bulk_write(dev->regmap, 0x80ec3f, "\x01", 1);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&pdev->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int it913x_set_params(struct dvb_frontend *fe)
+{
+	struct it913x_dev *dev = fe->tuner_priv;
+	struct platform_device *pdev = dev->pdev;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	int ret;
+	unsigned int utmp;
+	u32 pre_lo_freq, t_cal_freq;
+	u16 iqik_m_cal, n_div;
+	u8 u8tmp, n, l_band, lna_band;
+
+	dev_dbg(&pdev->dev, "role=%u, frequency %u, bandwidth_hz %u\n",
+			dev->role, c->frequency, c->bandwidth_hz);
+
+	if (!dev->active) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (c->frequency <=         74000000) {
+		n_div = 48;
+		n = 0;
+	} else if (c->frequency <= 111000000) {
+		n_div = 32;
+		n = 1;
+	} else if (c->frequency <= 148000000) {
+		n_div = 24;
+		n = 2;
+	} else if (c->frequency <= 222000000) {
+		n_div = 16;
+		n = 3;
+	} else if (c->frequency <= 296000000) {
+		n_div = 12;
+		n = 4;
+	} else if (c->frequency <= 445000000) {
+		n_div = 8;
+		n = 5;
+	} else if (c->frequency <= dev->fn_min) {
+		n_div = 6;
+		n = 6;
+	} else if (c->frequency <= 950000000) {
+		n_div = 4;
+		n = 7;
+	} else {
+		n_div = 2;
+		n = 0;
+	}
+
+	ret = regmap_read(dev->regmap, 0x80ed81, &utmp);
+	if (ret)
+		goto err;
+
+	iqik_m_cal = utmp * n_div;
+
+	if (utmp < 0x20) {
+		if (dev->clk_mode == 0)
+			iqik_m_cal = (iqik_m_cal * 9) >> 5;
+		else
+			iqik_m_cal >>= 1;
+	} else {
+		iqik_m_cal = 0x40 - iqik_m_cal;
+		if (dev->clk_mode == 0)
+			iqik_m_cal = ~((iqik_m_cal * 9) >> 5);
+		else
+			iqik_m_cal = ~(iqik_m_cal >> 1);
+	}
+
+	t_cal_freq = (c->frequency / 1000) * n_div * dev->fdiv;
+	pre_lo_freq = t_cal_freq / dev->xtal;
+	utmp = pre_lo_freq * dev->xtal;
+
+	if ((t_cal_freq - utmp) >= (dev->xtal >> 1))
+		pre_lo_freq++;
+
+	pre_lo_freq += (u32) n << 13;
+	/* Frequency OMEGA_IQIK_M_CAL_MID*/
+	t_cal_freq = pre_lo_freq + (u32)iqik_m_cal;
+	dev_dbg(&pdev->dev, "t_cal_freq %u, pre_lo_freq %u\n",
+			t_cal_freq, pre_lo_freq);
+
+	if (c->frequency <=         440000000) {
+		l_band = 0;
+		lna_band = 0;
+	} else if (c->frequency <=  484000000) {
+		l_band = 1;
+		lna_band = 1;
+	} else if (c->frequency <=  533000000) {
+		l_band = 1;
+		lna_band = 2;
+	} else if (c->frequency <=  587000000) {
+		l_band = 1;
+		lna_band = 3;
+	} else if (c->frequency <=  645000000) {
+		l_band = 1;
+		lna_band = 4;
+	} else if (c->frequency <=  710000000) {
+		l_band = 1;
+		lna_band = 5;
+	} else if (c->frequency <=  782000000) {
+		l_band = 1;
+		lna_band = 6;
+	} else if (c->frequency <=  860000000) {
+		l_band = 1;
+		lna_band = 7;
+	} else if (c->frequency <= 1492000000) {
+		l_band = 1;
+		lna_band = 0;
+	} else if (c->frequency <= 1685000000) {
+		l_band = 1;
+		lna_band = 1;
+	} else {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* XXX: latest windows driver does not set that at all */
+	ret = regmap_write(dev->regmap, 0x80ee06, lna_band);
+	if (ret)
+		goto err;
+
+	if (c->bandwidth_hz <=      5000000)
+		u8tmp = 0;
+	else if (c->bandwidth_hz <= 6000000)
+		u8tmp = 2;
+	else if (c->bandwidth_hz <= 7000000)
+		u8tmp = 4;
+	else
+		u8tmp = 6;       /* 8000000 */
+
+	ret = regmap_write(dev->regmap, 0x80ec56, u8tmp);
+	if (ret)
+		goto err;
+
+	/* XXX: latest windows driver sets different value (a8 != 68) */
+	ret = regmap_write(dev->regmap, 0x80ec4c, 0xa0 | (l_band << 3));
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80ec4d, (t_cal_freq >> 0) & 0xff);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80ec4e, (t_cal_freq >> 8) & 0xff);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80011e, (pre_lo_freq >> 0) & 0xff);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(dev->regmap, 0x80011f, (pre_lo_freq >> 8) & 0xff);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&pdev->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static const struct dvb_tuner_ops it913x_tuner_ops = {
+	.info = {
+		.name             = "ITE IT913X",
+		.frequency_min_hz = 174 * MHz,
+		.frequency_max_hz = 862 * MHz,
+	},
+
+	.init = it913x_init,
+	.sleep = it913x_sleep,
+	.set_params = it913x_set_params,
+};
+
+static int it913x_probe(struct platform_device *pdev)
+{
+	struct it913x_platform_data *pdata = pdev->dev.platform_data;
+	struct dvb_frontend *fe = pdata->fe;
+	struct it913x_dev *dev;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	int ret;
+	char *chip_ver_str;
+
+	dev = kzalloc(sizeof(struct it913x_dev), GFP_KERNEL);
+	if (dev == NULL) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "kzalloc() failed\n");
+		goto err;
+	}
+
+	dev->pdev = pdev;
+	dev->regmap = pdata->regmap;
+	dev->fe = pdata->fe;
+	dev->chip_ver = id->driver_data;
+	dev->role = pdata->role;
+
+	fe->tuner_priv = dev;
+	memcpy(&fe->ops.tuner_ops, &it913x_tuner_ops,
+			sizeof(struct dvb_tuner_ops));
+	platform_set_drvdata(pdev, dev);
+
+	if (dev->chip_ver == 1)
+		chip_ver_str = "AX";
+	else if (dev->chip_ver == 2)
+		chip_ver_str = "BX";
+	else
+		chip_ver_str = "??";
+
+	dev_info(&pdev->dev, "ITE IT913X %s successfully attached\n",
+		 chip_ver_str);
+	dev_dbg(&pdev->dev, "chip_ver %u, role %u\n", dev->chip_ver, dev->role);
+	return 0;
+err:
+	dev_dbg(&pdev->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int it913x_remove(struct platform_device *pdev)
+{
+	struct it913x_dev *dev = platform_get_drvdata(pdev);
+	struct dvb_frontend *fe = dev->fe;
+
+	dev_dbg(&pdev->dev, "\n");
+
+	memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
+	fe->tuner_priv = NULL;
+	kfree(dev);
+
+	return 0;
+}
+
+static const struct platform_device_id it913x_id_table[] = {
+	{"it9133ax-tuner", 1},
+	{"it9133bx-tuner", 2},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, it913x_id_table);
+
+static struct platform_driver it913x_driver = {
+	.driver = {
+		.name	= "it913x",
+		.suppress_bind_attrs	= true,
+	},
+	.probe		= it913x_probe,
+	.remove		= it913x_remove,
+	.id_table	= it913x_id_table,
+};
+
+module_platform_driver(it913x_driver);
+
+MODULE_DESCRIPTION("ITE IT913X silicon tuner driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_LICENSE("GPL");