Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 468 insertions, 0 deletions

diff --git a/drivers/media/usb/gspca/m5602/m5602_ov7660.c b/drivers/media/usb/gspca/m5602/m5602_ov7660.c
new file mode 100644
index 000000000..fadad530f
--- /dev/null
+++ b/drivers/media/usb/gspca/m5602/m5602_ov7660.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the ov7660 sensor
+ *
+ * Copyright (C) 2009 Erik Andrén
+ * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
+ * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
+ *
+ * Portions of code to USB interface and ALi driver software,
+ * Copyright (c) 2006 Willem Duinker
+ * v4l2 interface modeled after the V4L2 driver
+ * for SN9C10x PC Camera Controllers
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "m5602_ov7660.h"
+
+static int ov7660_s_ctrl(struct v4l2_ctrl *ctrl);
+static void ov7660_dump_registers(struct sd *sd);
+
+static const unsigned char preinit_ov7660[][4] = {
+	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
+	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00}
+};
+
+static const unsigned char init_ov7660[][4] = {
+	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
+	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+	{SENSOR, OV7660_COM7, 0x80},
+	{SENSOR, OV7660_CLKRC, 0x80},
+	{SENSOR, OV7660_COM9, 0x4c},
+	{SENSOR, OV7660_OFON, 0x43},
+	{SENSOR, OV7660_COM12, 0x28},
+	{SENSOR, OV7660_COM8, 0x00},
+	{SENSOR, OV7660_COM10, 0x40},
+	{SENSOR, OV7660_HSTART, 0x0c},
+	{SENSOR, OV7660_HSTOP, 0x61},
+	{SENSOR, OV7660_HREF, 0xa4},
+	{SENSOR, OV7660_PSHFT, 0x0b},
+	{SENSOR, OV7660_VSTART, 0x01},
+	{SENSOR, OV7660_VSTOP, 0x7a},
+	{SENSOR, OV7660_VSTOP, 0x00},
+	{SENSOR, OV7660_COM7, 0x05},
+	{SENSOR, OV7660_COM6, 0x42},
+	{SENSOR, OV7660_BBIAS, 0x94},
+	{SENSOR, OV7660_GbBIAS, 0x94},
+	{SENSOR, OV7660_RSVD29, 0x94},
+	{SENSOR, OV7660_RBIAS, 0x94},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_AECH, 0x00},
+	{SENSOR, OV7660_AECHH, 0x00},
+	{SENSOR, OV7660_ADC, 0x05},
+	{SENSOR, OV7660_COM13, 0x00},
+	{SENSOR, OV7660_RSVDA1, 0x23},
+	{SENSOR, OV7660_TSLB, 0x0d},
+	{SENSOR, OV7660_HV, 0x80},
+	{SENSOR, OV7660_LCC1, 0x00},
+	{SENSOR, OV7660_LCC2, 0x00},
+	{SENSOR, OV7660_LCC3, 0x10},
+	{SENSOR, OV7660_LCC4, 0x40},
+	{SENSOR, OV7660_LCC5, 0x01},
+
+	{SENSOR, OV7660_AECH, 0x20},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+	{SENSOR, OV7660_AECH, 0x5f},
+	{SENSOR, OV7660_COM1, 0x03},
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
+	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
+	{BRIDGE, M5602_XB_SIG_INI, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0xa7},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+};
+
+static struct v4l2_pix_format ov7660_modes[] = {
+	{
+		640,
+		480,
+		V4L2_PIX_FMT_SBGGR8,
+		V4L2_FIELD_NONE,
+		.sizeimage =
+			640 * 480,
+		.bytesperline = 640,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	}
+};
+
+static const struct v4l2_ctrl_ops ov7660_ctrl_ops = {
+	.s_ctrl = ov7660_s_ctrl,
+};
+
+int ov7660_probe(struct sd *sd)
+{
+	int err = 0, i;
+	u8 prod_id = 0, ver_id = 0;
+
+	if (force_sensor) {
+		if (force_sensor == OV7660_SENSOR) {
+			pr_info("Forcing an %s sensor\n", ov7660.name);
+			goto sensor_found;
+		}
+		/* If we want to force another sensor,
+		don't try to probe this one */
+		return -ENODEV;
+	}
+
+	/* Do the preinit */
+	for (i = 0; i < ARRAY_SIZE(preinit_ov7660) && !err; i++) {
+		u8 data[2];
+
+		if (preinit_ov7660[i][0] == BRIDGE) {
+			err = m5602_write_bridge(sd,
+				preinit_ov7660[i][1],
+				preinit_ov7660[i][2]);
+		} else {
+			data[0] = preinit_ov7660[i][2];
+			err = m5602_write_sensor(sd,
+				preinit_ov7660[i][1], data, 1);
+		}
+	}
+	if (err < 0)
+		return err;
+
+	if (m5602_read_sensor(sd, OV7660_PID, &prod_id, 1))
+		return -ENODEV;
+
+	if (m5602_read_sensor(sd, OV7660_VER, &ver_id, 1))
+		return -ENODEV;
+
+	pr_info("Sensor reported 0x%x%x\n", prod_id, ver_id);
+
+	if ((prod_id == 0x76) && (ver_id == 0x60)) {
+		pr_info("Detected a ov7660 sensor\n");
+		goto sensor_found;
+	}
+	return -ENODEV;
+
+sensor_found:
+	sd->gspca_dev.cam.cam_mode = ov7660_modes;
+	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(ov7660_modes);
+
+	return 0;
+}
+
+int ov7660_init(struct sd *sd)
+{
+	int i, err;
+
+	/* Init the sensor */
+	for (i = 0; i < ARRAY_SIZE(init_ov7660); i++) {
+		u8 data[2];
+
+		if (init_ov7660[i][0] == BRIDGE) {
+			err = m5602_write_bridge(sd,
+				init_ov7660[i][1],
+				init_ov7660[i][2]);
+		} else {
+			data[0] = init_ov7660[i][2];
+			err = m5602_write_sensor(sd,
+				init_ov7660[i][1], data, 1);
+		}
+		if (err < 0)
+			return err;
+	}
+
+	if (dump_sensor)
+		ov7660_dump_registers(sd);
+
+	return 0;
+}
+
+int ov7660_init_controls(struct sd *sd)
+{
+	struct v4l2_ctrl_handler *hdl = &sd->gspca_dev.ctrl_handler;
+
+	sd->gspca_dev.vdev.ctrl_handler = hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+
+	v4l2_ctrl_new_std(hdl, &ov7660_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
+			  0, 1, 1, 1);
+	v4l2_ctrl_new_std_menu(hdl, &ov7660_ctrl_ops,
+			  V4L2_CID_EXPOSURE_AUTO, 1, 0, V4L2_EXPOSURE_AUTO);
+
+	sd->autogain = v4l2_ctrl_new_std(hdl, &ov7660_ctrl_ops,
+					 V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	sd->gain = v4l2_ctrl_new_std(hdl, &ov7660_ctrl_ops, V4L2_CID_GAIN, 0,
+				     255, 1, OV7660_DEFAULT_GAIN);
+
+	sd->hflip = v4l2_ctrl_new_std(hdl, &ov7660_ctrl_ops, V4L2_CID_HFLIP,
+				      0, 1, 1, 0);
+	sd->vflip = v4l2_ctrl_new_std(hdl, &ov7660_ctrl_ops, V4L2_CID_VFLIP,
+				      0, 1, 1, 0);
+
+	if (hdl->error) {
+		pr_err("Could not initialize controls\n");
+		return hdl->error;
+	}
+
+	v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
+	v4l2_ctrl_cluster(2, &sd->hflip);
+
+	return 0;
+}
+
+int ov7660_start(struct sd *sd)
+{
+	return 0;
+}
+
+int ov7660_stop(struct sd *sd)
+{
+	return 0;
+}
+
+void ov7660_disconnect(struct sd *sd)
+{
+	ov7660_stop(sd);
+
+	sd->sensor = NULL;
+}
+
+static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data = val;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dbg(gspca_dev, D_CONF, "Setting gain to %d\n", val);
+
+	err = m5602_write_sensor(sd, OV7660_GAIN, &i2c_data, 1);
+	return err;
+}
+
+static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dbg(gspca_dev, D_CONF, "Set auto white balance to %d\n", val);
+
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1));
+	err = m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+
+	return err;
+}
+
+static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dbg(gspca_dev, D_CONF, "Set auto gain control to %d\n", val);
+
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2));
+
+	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+}
+
+static int ov7660_set_auto_exposure(struct gspca_dev *gspca_dev,
+				    __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dbg(gspca_dev, D_CONF, "Set auto exposure control to %d\n", val);
+
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	val = (val == V4L2_EXPOSURE_AUTO);
+	i2c_data = ((i2c_data & 0xfe) | ((val & 0x01) << 0));
+
+	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+}
+
+static int ov7660_set_hvflip(struct gspca_dev *gspca_dev)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	gspca_dbg(gspca_dev, D_CONF, "Set hvflip to %d, %d\n",
+		  sd->hflip->val, sd->vflip->val);
+
+	i2c_data = (sd->hflip->val << 5) | (sd->vflip->val << 4);
+
+	err = m5602_write_sensor(sd, OV7660_MVFP, &i2c_data, 1);
+
+	return err;
+}
+
+static int ov7660_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct gspca_dev *gspca_dev =
+		container_of(ctrl->handler, struct gspca_dev, ctrl_handler);
+	struct sd *sd = (struct sd *) gspca_dev;
+	int err;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		err = ov7660_set_auto_white_balance(gspca_dev, ctrl->val);
+		break;
+	case V4L2_CID_EXPOSURE_AUTO:
+		err = ov7660_set_auto_exposure(gspca_dev, ctrl->val);
+		break;
+	case V4L2_CID_AUTOGAIN:
+		err = ov7660_set_auto_gain(gspca_dev, ctrl->val);
+		if (err || ctrl->val)
+			return err;
+		err = ov7660_set_gain(gspca_dev, sd->gain->val);
+		break;
+	case V4L2_CID_HFLIP:
+		err = ov7660_set_hvflip(gspca_dev);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+static void ov7660_dump_registers(struct sd *sd)
+{
+	int address;
+	pr_info("Dumping the ov7660 register state\n");
+	for (address = 0; address < 0xa9; address++) {
+		u8 value;
+		m5602_read_sensor(sd, address, &value, 1);
+		pr_info("register 0x%x contains 0x%x\n", address, value);
+	}
+
+	pr_info("ov7660 register state dump complete\n");
+
+	pr_info("Probing for which registers that are read/write\n");
+	for (address = 0; address < 0xff; address++) {
+		u8 old_value, ctrl_value;
+		u8 test_value[2] = {0xff, 0xff};
+
+		m5602_read_sensor(sd, address, &old_value, 1);
+		m5602_write_sensor(sd, address, test_value, 1);
+		m5602_read_sensor(sd, address, &ctrl_value, 1);
+
+		if (ctrl_value == test_value[0])
+			pr_info("register 0x%x is writeable\n", address);
+		else
+			pr_info("register 0x%x is read only\n", address);
+
+		/* Restore original value */
+		m5602_write_sensor(sd, address, &old_value, 1);
+	}
+}