Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 242 insertions, 0 deletions

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
new file mode 100644
index 000000000..fac290e48
--- /dev/null
+++ b/drivers/memory/Kconfig
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Memory devices
+#
+
+menuconfig MEMORY
+	bool "Memory Controller drivers"
+	help
+	  This option allows to enable specific memory controller drivers,
+	  useful mostly on embedded systems.  These could be controllers
+	  for DRAM (SDR, DDR), ROM, SRAM and others.  The drivers features
+	  vary from memory tuning and frequency scaling to enabling
+	  access to attached peripherals through memory bus.
+
+if MEMORY
+
+config DDR
+	bool
+	help
+	  Data from JEDEC specs for DDR SDRAM memories,
+	  particularly the AC timing parameters and addressing
+	  information. This data is useful for drivers handling
+	  DDR SDRAM controllers.
+
+config ARM_PL172_MPMC
+	tristate "ARM PL172 MPMC driver"
+	depends on ARM_AMBA && OF
+	help
+	  This selects the ARM PrimeCell PL172 MultiPort Memory Controller.
+	  If you have an embedded system with an AMBA bus and a PL172
+	  controller, say Y or M here.
+
+config ATMEL_SDRAMC
+	bool "Atmel (Multi-port DDR-)SDRAM Controller"
+	default y if ARCH_AT91
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on OF
+	help
+	  This driver is for Atmel SDRAM Controller or Atmel Multi-port
+	  DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
+	  Starting with the at91sam9g45, this controller supports SDR, DDR and
+	  LP-DDR memories.
+
+config ATMEL_EBI
+	bool "Atmel EBI driver"
+	default y if ARCH_AT91
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on OF
+	select MFD_SYSCON
+	select MFD_ATMEL_SMC
+	help
+	  Driver for Atmel EBI controller.
+	  Used to configure the EBI (external bus interface) when the device-
+	  tree is used. This bus supports NANDs, external ethernet controller,
+	  SRAMs, ATA devices, etc.
+
+config BRCMSTB_DPFE
+	tristate "Broadcom STB DPFE driver"
+	default ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  This driver provides access to the DPFE interface of Broadcom
+	  STB SoCs. The firmware running on the DCPU inside the DDR PHY can
+	  provide current information about the system's RAM, for instance
+	  the DRAM refresh rate. This can be used as an indirect indicator
+	  for the DRAM's temperature. Slower refresh rate means cooler RAM,
+	  higher refresh rate means hotter RAM.
+
+config BRCMSTB_MEMC
+	tristate "Broadcom STB MEMC driver"
+	default ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  This driver provides a way to configure the Broadcom STB memory
+	  controller and specifically control the Self Refresh Power Down
+	  (SRPD) inactivity timeout.
+
+config BT1_L2_CTL
+	bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Baikal-T1 CPU is based on the MIPS P5600 Warrior IP-core. The CPU
+	  resides Coherency Manager v2 with embedded 1MB L2-cache. It's
+	  possible to tune the L2 cache performance up by setting the data,
+	  tags and way-select latencies of RAM access. This driver provides a
+	  dt properties-based and sysfs interface for it.
+
+config TI_AEMIF
+	tristate "Texas Instruments AEMIF driver"
+	depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
+	depends on OF
+	help
+	  This driver is for the AEMIF module available in Texas Instruments
+	  SoCs. AEMIF stands for Asynchronous External Memory Interface and
+	  is intended to provide a glue-less interface to a variety of
+	  asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
+	  of 256M bytes of any of these memories can be accessed at a given
+	  time via four chip selects with 64M byte access per chip select.
+
+config TI_EMIF
+	tristate "Texas Instruments EMIF driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	select DDR
+	help
+	  This driver is for the EMIF module available in Texas Instruments
+	  SoCs. EMIF is an SDRAM controller that, based on its revision,
+	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+	  This driver takes care of only LPDDR2 memories presently. The
+	  functions of the driver includes re-configuring AC timing
+	  parameters and other settings during frequency, voltage and
+	  temperature changes
+
+config OMAP_GPMC
+	tristate "Texas Instruments OMAP SoC GPMC driver"
+	depends on OF_ADDRESS
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select GPIOLIB
+	help
+	  This driver is for the General Purpose Memory Controller (GPMC)
+	  present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+	  interfacing to a variety of asynchronous as well as synchronous
+	  memory drives like NOR, NAND, OneNAND, SRAM.
+
+config OMAP_GPMC_DEBUG
+	bool "Enable GPMC debug output and skip reset of GPMC during init"
+	depends on OMAP_GPMC
+	help
+	  Enables verbose debugging mostly to decode the bootloader provided
+	  timings. To preserve the bootloader provided timings, the reset
+	  of GPMC is skipped during init. Enable this during development to
+	  configure devices connected to the GPMC bus.
+
+	  NOTE: In addition to matching the register setup with the bootloader
+	  you also need to match the GPMC FCLK frequency used by the
+	  bootloader or else the GPMC timings won't be identical with the
+	  bootloader timings.
+
+config TI_EMIF_SRAM
+	tristate "Texas Instruments EMIF SRAM driver"
+	depends on SOC_AM33XX || SOC_AM43XX || (ARM && CPU_V7 && COMPILE_TEST)
+	depends on SRAM
+	help
+	  This driver is for the EMIF module available on Texas Instruments
+	  AM33XX and AM43XX SoCs and is required for PM. Certain parts of
+	  the EMIF PM code must run from on-chip SRAM late in the suspend
+	  sequence so this driver provides several relocatable PM functions
+	  for the SoC PM code to use.
+
+config FPGA_DFL_EMIF
+	tristate "FPGA DFL EMIF Driver"
+	depends on FPGA_DFL && HAS_IOMEM
+	help
+	  This driver is for the EMIF private feature implemented under
+	  FPGA Device Feature List (DFL) framework. It is used to expose
+	  memory interface status information as well as memory clearing
+	  control.
+
+config MVEBU_DEVBUS
+	bool "Marvell EBU Device Bus Controller"
+	default y if PLAT_ORION
+	depends on PLAT_ORION || COMPILE_TEST
+	depends on OF
+	help
+	  This driver is for the Device Bus controller available in some
+	  Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
+	  Armada 370 and Armada XP. This controller allows to handle flash
+	  devices such as NOR, NAND, SRAM, and FPGA.
+
+config FSL_CORENET_CF
+	tristate "Freescale CoreNet Error Reporting"
+	depends on FSL_SOC_BOOKE || COMPILE_TEST
+	help
+	  Say Y for reporting of errors from the Freescale CoreNet
+	  Coherency Fabric.  Errors reported include accesses to
+	  physical addresses that mapped by no local access window
+	  (LAW) or an invalid LAW, as well as bad cache state that
+	  represents a coherency violation.
+
+config FSL_IFC
+	bool "Freescale IFC driver" if COMPILE_TEST
+	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
+	depends on HAS_IOMEM
+
+config JZ4780_NEMC
+	bool "Ingenic JZ4780 SoC NEMC driver"
+	depends on MIPS || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  This driver is for the NAND/External Memory Controller (NEMC) in
+	  the Ingenic JZ4780. This controller is used to handle external
+	  memory devices such as NAND and SRAM.
+
+config MTK_SMI
+	tristate "MediaTek SoC Memory Controller driver" if COMPILE_TEST
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  This driver is for the Memory Controller module in MediaTek SoCs,
+	  mainly help enable/disable iommu and control the power domain and
+	  clocks for each local arbiter.
+
+config DA8XX_DDRCTL
+	bool "Texas Instruments da8xx DDR2/mDDR driver"
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+	help
+	  This driver is for the DDR2/mDDR Memory Controller present on
+	  Texas Instruments da8xx SoCs. It's used to tweak various memory
+	  controller configuration options.
+
+config PL353_SMC
+	tristate "ARM PL35X Static Memory Controller(SMC) driver"
+	default y if ARM
+	depends on ARM || COMPILE_TEST
+	depends on ARM_AMBA
+	help
+	  This driver is for the ARM PL351/PL353 Static Memory
+	  Controller(SMC) module.
+
+config RENESAS_RPCIF
+	tristate "Renesas RPC-IF driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select REGMAP_MMIO
+	select RESET_CONTROLLER
+	help
+	  This supports Renesas R-Car Gen3 or RZ/G2 RPC-IF which provides
+	  either SPI host or HyperFlash. You'll have to select individual
+	  components under the corresponding menu.
+
+config STM32_FMC2_EBI
+	tristate "Support for FMC2 External Bus Interface on STM32MP SoCs"
+	depends on MACH_STM32MP157 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Select this option to enable the STM32 FMC2 External Bus Interface
+	  controller. This driver configures the transactions with external
+	  devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
+	  SOCs containing the FMC2 External Bus Interface.
+
+source "drivers/memory/samsung/Kconfig"
+source "drivers/memory/tegra/Kconfig"
+
+endif