Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 437 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
new file mode 100644
index 000000000..be3b1ebc0
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ * Contributors: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+#include <linux/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+
+#include "stmmac_platform.h"
+
+#define DWMAC_125MHZ	125000000
+#define DWMAC_50MHZ	50000000
+#define DWMAC_25MHZ	25000000
+#define DWMAC_2_5MHZ	2500000
+
+#define IS_PHY_IF_MODE_RGMII(iface)	(iface == PHY_INTERFACE_MODE_RGMII || \
+			iface == PHY_INTERFACE_MODE_RGMII_ID || \
+			iface == PHY_INTERFACE_MODE_RGMII_RXID || \
+			iface == PHY_INTERFACE_MODE_RGMII_TXID)
+
+#define IS_PHY_IF_MODE_GBIT(iface)	(IS_PHY_IF_MODE_RGMII(iface) || \
+					 iface == PHY_INTERFACE_MODE_GMII)
+
+/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families)
+ *
+ * Below table summarizes the clock requirement and clock sources for
+ * supported phy interface modes with link speeds.
+ * ________________________________________________
+ *|  PHY_MODE	| 1000 Mbit Link | 100 Mbit Link   |
+ * ------------------------------------------------
+ *|	MII	|	n/a	 |	25Mhz	   |
+ *|		|		 |	txclk	   |
+ * ------------------------------------------------
+ *|	GMII	|     125Mhz	 |	25Mhz	   |
+ *|		|  clk-125/txclk |	txclk	   |
+ * ------------------------------------------------
+ *|	RGMII	|     125Mhz	 |	25Mhz	   |
+ *|		|  clk-125/txclk |	clkgen     |
+ *|		|    clkgen	 |		   |
+ * ------------------------------------------------
+ *|	RMII	|	n/a	 |	25Mhz	   |
+ *|		|		 |clkgen/phyclk-in |
+ * ------------------------------------------------
+ *
+ *	  Register Configuration
+ *-------------------------------
+ * src	 |BIT(8)| BIT(7)| BIT(6)|
+ *-------------------------------
+ * txclk |   0	|  n/a	|   1	|
+ *-------------------------------
+ * ck_125|   0	|  n/a	|   0	|
+ *-------------------------------
+ * phyclk|   1	|   0	|  n/a	|
+ *-------------------------------
+ * clkgen|   1	|   1	|  n/a	|
+ *-------------------------------
+ */
+
+#define STIH4XX_RETIME_SRC_MASK			GENMASK(8, 6)
+#define STIH4XX_ETH_SEL_TX_RETIME_CLK		BIT(8)
+#define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK	BIT(7)
+#define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125	BIT(6)
+
+/* STiD127 register definitions
+ *-----------------------
+ * src	 |BIT(6)| BIT(7)|
+ *-----------------------
+ * MII   |  1	|   n/a	|
+ *-----------------------
+ * RMII  |  n/a	|   1	|
+ * clkgen|	|	|
+ *-----------------------
+ * RMII  |  n/a	|   0	|
+ * phyclk|	|	|
+ *-----------------------
+ * RGMII |  1	|  n/a	|
+ * clkgen|	|	|
+ *-----------------------
+ */
+
+#define STID127_RETIME_SRC_MASK			GENMASK(7, 6)
+#define STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK	BIT(7)
+#define STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK	BIT(6)
+
+#define ENMII_MASK	GENMASK(5, 5)
+#define ENMII		BIT(5)
+#define EN_MASK		GENMASK(1, 1)
+#define EN		BIT(1)
+
+/*
+ * 3 bits [4:2]
+ *	000-GMII/MII
+ *	001-RGMII
+ *	010-SGMII
+ *	100-RMII
+ */
+#define MII_PHY_SEL_MASK	GENMASK(4, 2)
+#define ETH_PHY_SEL_RMII	BIT(4)
+#define ETH_PHY_SEL_SGMII	BIT(3)
+#define ETH_PHY_SEL_RGMII	BIT(2)
+#define ETH_PHY_SEL_GMII	0x0
+#define ETH_PHY_SEL_MII		0x0
+
+struct sti_dwmac {
+	phy_interface_t interface;	/* MII interface */
+	bool ext_phyclk;	/* Clock from external PHY */
+	u32 tx_retime_src;	/* TXCLK Retiming*/
+	struct clk *clk;	/* PHY clock */
+	u32 ctrl_reg;		/* GMAC glue-logic control register */
+	int clk_sel_reg;	/* GMAC ext clk selection register */
+	struct regmap *regmap;
+	bool gmac_en;
+	u32 speed;
+	void (*fix_retime_src)(void *priv, unsigned int speed);
+};
+
+struct sti_dwmac_of_data {
+	void (*fix_retime_src)(void *priv, unsigned int speed);
+};
+
+static u32 phy_intf_sels[] = {
+	[PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII,
+	[PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII,
+	[PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII,
+	[PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII,
+	[PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII,
+	[PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII,
+};
+
+enum {
+	TX_RETIME_SRC_NA = 0,
+	TX_RETIME_SRC_TXCLK = 1,
+	TX_RETIME_SRC_CLK_125,
+	TX_RETIME_SRC_PHYCLK,
+	TX_RETIME_SRC_CLKGEN,
+};
+
+static u32 stih4xx_tx_retime_val[] = {
+	[TX_RETIME_SRC_TXCLK] = STIH4XX_ETH_SEL_TXCLK_NOT_CLK125,
+	[TX_RETIME_SRC_CLK_125] = 0x0,
+	[TX_RETIME_SRC_PHYCLK] = STIH4XX_ETH_SEL_TX_RETIME_CLK,
+	[TX_RETIME_SRC_CLKGEN] = STIH4XX_ETH_SEL_TX_RETIME_CLK
+				 | STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK,
+};
+
+static void stih4xx_fix_retime_src(void *priv, u32 spd)
+{
+	struct sti_dwmac *dwmac = priv;
+	u32 src = dwmac->tx_retime_src;
+	u32 reg = dwmac->ctrl_reg;
+	u32 freq = 0;
+
+	if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
+		src = TX_RETIME_SRC_TXCLK;
+	} else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
+		if (dwmac->ext_phyclk) {
+			src = TX_RETIME_SRC_PHYCLK;
+		} else {
+			src = TX_RETIME_SRC_CLKGEN;
+			freq = DWMAC_50MHZ;
+		}
+	} else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
+		/* On GiGa clk source can be either ext or from clkgen */
+		if (spd == SPEED_1000) {
+			freq = DWMAC_125MHZ;
+		} else {
+			/* Switch to clkgen for these speeds */
+			src = TX_RETIME_SRC_CLKGEN;
+			if (spd == SPEED_100)
+				freq = DWMAC_25MHZ;
+			else if (spd == SPEED_10)
+				freq = DWMAC_2_5MHZ;
+		}
+	}
+
+	if (src == TX_RETIME_SRC_CLKGEN && freq)
+		clk_set_rate(dwmac->clk, freq);
+
+	regmap_update_bits(dwmac->regmap, reg, STIH4XX_RETIME_SRC_MASK,
+			   stih4xx_tx_retime_val[src]);
+}
+
+static void stid127_fix_retime_src(void *priv, u32 spd)
+{
+	struct sti_dwmac *dwmac = priv;
+	u32 reg = dwmac->ctrl_reg;
+	u32 freq = 0;
+	u32 val = 0;
+
+	if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
+		val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
+	} else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
+		if (!dwmac->ext_phyclk) {
+			val = STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK;
+			freq = DWMAC_50MHZ;
+		}
+	} else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
+		val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
+		if (spd == SPEED_1000)
+			freq = DWMAC_125MHZ;
+		else if (spd == SPEED_100)
+			freq = DWMAC_25MHZ;
+		else if (spd == SPEED_10)
+			freq = DWMAC_2_5MHZ;
+	}
+
+	if (freq)
+		clk_set_rate(dwmac->clk, freq);
+
+	regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
+}
+
+static int sti_dwmac_set_mode(struct sti_dwmac *dwmac)
+{
+	struct regmap *regmap = dwmac->regmap;
+	int iface = dwmac->interface;
+	u32 reg = dwmac->ctrl_reg;
+	u32 val;
+
+	if (dwmac->gmac_en)
+		regmap_update_bits(regmap, reg, EN_MASK, EN);
+
+	regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]);
+
+	val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
+	regmap_update_bits(regmap, reg, ENMII_MASK, val);
+
+	dwmac->fix_retime_src(dwmac, dwmac->speed);
+
+	return 0;
+}
+
+static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
+				struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	int err;
+
+	/* clk selection from extra syscfg register */
+	dwmac->clk_sel_reg = -ENXIO;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-clkconf");
+	if (res)
+		dwmac->clk_sel_reg = res->start;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->ctrl_reg);
+	if (err) {
+		dev_err(dev, "Can't get sysconfig ctrl offset (%d)\n", err);
+		return err;
+	}
+
+	err = of_get_phy_mode(np, &dwmac->interface);
+	if (err && err != -ENODEV) {
+		dev_err(dev, "Can't get phy-mode\n");
+		return err;
+	}
+
+	dwmac->regmap = regmap;
+	dwmac->gmac_en = of_property_read_bool(np, "st,gmac_en");
+	dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
+	dwmac->tx_retime_src = TX_RETIME_SRC_NA;
+	dwmac->speed = SPEED_100;
+
+	if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) {
+		const char *rs;
+
+		dwmac->tx_retime_src = TX_RETIME_SRC_CLKGEN;
+
+		err = of_property_read_string(np, "st,tx-retime-src", &rs);
+		if (err < 0) {
+			dev_warn(dev, "Use internal clock source\n");
+		} else {
+			if (!strcasecmp(rs, "clk_125"))
+				dwmac->tx_retime_src = TX_RETIME_SRC_CLK_125;
+			else if (!strcasecmp(rs, "txclk"))
+				dwmac->tx_retime_src = TX_RETIME_SRC_TXCLK;
+		}
+		dwmac->speed = SPEED_1000;
+	}
+
+	dwmac->clk = devm_clk_get(dev, "sti-ethclk");
+	if (IS_ERR(dwmac->clk)) {
+		dev_warn(dev, "No phy clock provided...\n");
+		dwmac->clk = NULL;
+	}
+
+	return 0;
+}
+
+static int sti_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	const struct sti_dwmac_of_data *data;
+	struct stmmac_resources stmmac_res;
+	struct sti_dwmac *dwmac;
+	int ret;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		dev_err(&pdev->dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac) {
+		ret = -ENOMEM;
+		goto err_remove_config_dt;
+	}
+
+	ret = sti_dwmac_parse_data(dwmac, pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to parse OF data\n");
+		goto err_remove_config_dt;
+	}
+
+	dwmac->fix_retime_src = data->fix_retime_src;
+
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->fix_mac_speed = data->fix_retime_src;
+
+	ret = clk_prepare_enable(dwmac->clk);
+	if (ret)
+		goto err_remove_config_dt;
+
+	ret = sti_dwmac_set_mode(dwmac);
+	if (ret)
+		goto disable_clk;
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto disable_clk;
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(dwmac->clk);
+err_remove_config_dt:
+	stmmac_remove_config_dt(pdev, plat_dat);
+
+	return ret;
+}
+
+static int sti_dwmac_remove(struct platform_device *pdev)
+{
+	struct sti_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
+
+	stmmac_dvr_remove(&pdev->dev);
+
+	clk_disable_unprepare(dwmac->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sti_dwmac_suspend(struct device *dev)
+{
+	struct sti_dwmac *dwmac = get_stmmac_bsp_priv(dev);
+	int ret = stmmac_suspend(dev);
+
+	clk_disable_unprepare(dwmac->clk);
+
+	return ret;
+}
+
+static int sti_dwmac_resume(struct device *dev)
+{
+	struct sti_dwmac *dwmac = get_stmmac_bsp_priv(dev);
+
+	clk_prepare_enable(dwmac->clk);
+	sti_dwmac_set_mode(dwmac);
+
+	return stmmac_resume(dev);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(sti_dwmac_pm_ops, sti_dwmac_suspend,
+					   sti_dwmac_resume);
+
+static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
+	.fix_retime_src = stih4xx_fix_retime_src,
+};
+
+static const struct sti_dwmac_of_data stid127_dwmac_data = {
+	.fix_retime_src = stid127_fix_retime_src,
+};
+
+static const struct of_device_id sti_dwmac_match[] = {
+	{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
+	{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
+	{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
+	{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sti_dwmac_match);
+
+static struct platform_driver sti_dwmac_driver = {
+	.probe  = sti_dwmac_probe,
+	.remove = sti_dwmac_remove,
+	.driver = {
+		.name           = "sti-dwmac",
+		.pm		= &sti_dwmac_pm_ops,
+		.of_match_table = sti_dwmac_match,
+	},
+};
+module_platform_driver(sti_dwmac_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics DWMAC Specific Glue layer");
+MODULE_LICENSE("GPL");