Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 291 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
new file mode 100644
index 000000000..f5581db0b
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*******************************************************************************
+  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
+  developing this code.
+
+  This contains the functions to handle the dma.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <asm/io.h>
+#include "dwmac1000.h"
+#include "dwmac_dma.h"
+
+static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
+{
+	u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
+	int i;
+
+	pr_info("dwmac1000: Master AXI performs %s burst length\n",
+		!(value & DMA_AXI_UNDEF) ? "fixed" : "any");
+
+	if (axi->axi_lpi_en)
+		value |= DMA_AXI_EN_LPI;
+	if (axi->axi_xit_frm)
+		value |= DMA_AXI_LPI_XIT_FRM;
+
+	value &= ~DMA_AXI_WR_OSR_LMT;
+	value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
+		 DMA_AXI_WR_OSR_LMT_SHIFT;
+
+	value &= ~DMA_AXI_RD_OSR_LMT;
+	value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
+		 DMA_AXI_RD_OSR_LMT_SHIFT;
+
+	/* Depending on the UNDEF bit the Master AXI will perform any burst
+	 * length according to the BLEN programmed (by default all BLEN are
+	 * set).
+	 */
+	for (i = 0; i < AXI_BLEN; i++) {
+		switch (axi->axi_blen[i]) {
+		case 256:
+			value |= DMA_AXI_BLEN256;
+			break;
+		case 128:
+			value |= DMA_AXI_BLEN128;
+			break;
+		case 64:
+			value |= DMA_AXI_BLEN64;
+			break;
+		case 32:
+			value |= DMA_AXI_BLEN32;
+			break;
+		case 16:
+			value |= DMA_AXI_BLEN16;
+			break;
+		case 8:
+			value |= DMA_AXI_BLEN8;
+			break;
+		case 4:
+			value |= DMA_AXI_BLEN4;
+			break;
+		}
+	}
+
+	writel(value, ioaddr + DMA_AXI_BUS_MODE);
+}
+
+static void dwmac1000_dma_init(void __iomem *ioaddr,
+			       struct stmmac_dma_cfg *dma_cfg, int atds)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+
+	/*
+	 * Set the DMA PBL (Programmable Burst Length) mode.
+	 *
+	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
+	 * post 3.5 mode bit acts as 8*PBL.
+	 */
+	if (dma_cfg->pblx8)
+		value |= DMA_BUS_MODE_MAXPBL;
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+	/* Set the Fixed burst mode */
+	if (dma_cfg->fixed_burst)
+		value |= DMA_BUS_MODE_FB;
+
+	/* Mixed Burst has no effect when fb is set */
+	if (dma_cfg->mixed_burst)
+		value |= DMA_BUS_MODE_MB;
+
+	if (atds)
+		value |= DMA_BUS_MODE_ATDS;
+
+	if (dma_cfg->aal)
+		value |= DMA_BUS_MODE_AAL;
+
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
+
+static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  dma_addr_t dma_rx_phy, u32 chan)
+{
+	/* RX descriptor base address list must be written into DMA CSR3 */
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  dma_addr_t dma_tx_phy, u32 chan)
+{
+	/* TX descriptor base address list must be written into DMA CSR4 */
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
+}
+
+static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
+{
+	csr6 &= ~DMA_CONTROL_RFA_MASK;
+	csr6 &= ~DMA_CONTROL_RFD_MASK;
+
+	/* Leave flow control disabled if receive fifo size is less than
+	 * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
+	 * and send XON when 2K less than full.
+	 */
+	if (rxfifosz < 4096) {
+		csr6 &= ~DMA_CONTROL_EFC;
+		pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
+			 rxfifosz);
+	} else {
+		csr6 |= DMA_CONTROL_EFC;
+		csr6 |= RFA_FULL_MINUS_1K;
+		csr6 |= RFD_FULL_MINUS_2K;
+	}
+	return csr6;
+}
+
+static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (mode == SF_DMA_MODE) {
+		pr_debug("GMAC: enable RX store and forward mode\n");
+		csr6 |= DMA_CONTROL_RSF;
+	} else {
+		pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
+		csr6 &= ~DMA_CONTROL_RSF;
+		csr6 &= DMA_CONTROL_TC_RX_MASK;
+		if (mode <= 32)
+			csr6 |= DMA_CONTROL_RTC_32;
+		else if (mode <= 64)
+			csr6 |= DMA_CONTROL_RTC_64;
+		else if (mode <= 96)
+			csr6 |= DMA_CONTROL_RTC_96;
+		else
+			csr6 |= DMA_CONTROL_RTC_128;
+	}
+
+	/* Configure flow control based on rx fifo size */
+	csr6 = dwmac1000_configure_fc(csr6, fifosz);
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (mode == SF_DMA_MODE) {
+		pr_debug("GMAC: enable TX store and forward mode\n");
+		/* Transmit COE type 2 cannot be done in cut-through mode. */
+		csr6 |= DMA_CONTROL_TSF;
+		/* Operating on second frame increase the performance
+		 * especially when transmit store-and-forward is used.
+		 */
+		csr6 |= DMA_CONTROL_OSF;
+	} else {
+		pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
+		csr6 &= ~DMA_CONTROL_TSF;
+		csr6 &= DMA_CONTROL_TC_TX_MASK;
+		/* Set the transmit threshold */
+		if (mode <= 32)
+			csr6 |= DMA_CONTROL_TTC_32;
+		else if (mode <= 64)
+			csr6 |= DMA_CONTROL_TTC_64;
+		else if (mode <= 128)
+			csr6 |= DMA_CONTROL_TTC_128;
+		else if (mode <= 192)
+			csr6 |= DMA_CONTROL_TTC_192;
+		else
+			csr6 |= DMA_CONTROL_TTC_256;
+	}
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
+{
+	int i;
+
+	for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
+		if ((i < 12) || (i > 17))
+			reg_space[DMA_BUS_MODE / 4 + i] =
+				readl(ioaddr + DMA_BUS_MODE + i * 4);
+}
+
+static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
+				    struct dma_features *dma_cap)
+{
+	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
+
+	if (!hw_cap) {
+		/* 0x00000000 is the value read on old hardware that does not
+		 * implement this register
+		 */
+		return -EOPNOTSUPP;
+	}
+
+	dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
+	dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
+	dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
+	dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
+	dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
+	dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
+	dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
+	dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
+	dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
+	/* MMC */
+	dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
+	/* IEEE 1588-2002 */
+	dma_cap->time_stamp =
+	    (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
+	/* IEEE 1588-2008 */
+	dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
+	/* 802.3az - Energy-Efficient Ethernet (EEE) */
+	dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
+	dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
+	/* TX and RX csum */
+	dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
+	dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
+	dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
+	dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
+	/* TX and RX number of channels */
+	dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
+	dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
+	/* Alternate (enhanced) DESC mode */
+	dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
+
+	return 0;
+}
+
+static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
+				  u32 queue)
+{
+	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
+}
+
+const struct stmmac_dma_ops dwmac1000_dma_ops = {
+	.reset = dwmac_dma_reset,
+	.init = dwmac1000_dma_init,
+	.init_rx_chan = dwmac1000_dma_init_rx,
+	.init_tx_chan = dwmac1000_dma_init_tx,
+	.axi = dwmac1000_dma_axi,
+	.dump_regs = dwmac1000_dump_dma_regs,
+	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
+	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
+	.get_hw_feature = dwmac1000_get_hw_feature,
+	.rx_watchdog = dwmac1000_rx_watchdog,
+};