Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 352 insertions, 0 deletions

diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h
new file mode 100644
index 000000000..013bf42e2
--- /dev/null
+++ b/drivers/net/usb/smsc95xx.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC95XX_H
+#define _SMSC95XX_H
+
+/* Tx command words */
+#define TX_CMD_A_DATA_OFFSET_	(0x001F0000)	/* Data Start Offset */
+#define TX_CMD_A_FIRST_SEG_	(0x00002000)	/* First Segment */
+#define TX_CMD_A_LAST_SEG_	(0x00001000)	/* Last Segment */
+#define TX_CMD_A_BUF_SIZE_	(0x000007FF)	/* Buffer Size */
+
+#define TX_CMD_B_CSUM_ENABLE	(0x00004000)	/* TX Checksum Enable */
+#define TX_CMD_B_ADD_CRC_DIS_	(0x00002000)	/* Add CRC Disable */
+#define TX_CMD_B_DIS_PADDING_	(0x00001000)	/* Disable Frame Padding */
+#define TX_CMD_B_FRAME_LENGTH_	(0x000007FF)	/* Frame Length (bytes) */
+
+/* Rx status word */
+#define RX_STS_FF_		(0x40000000)	/* Filter Fail */
+#define RX_STS_FL_		(0x3FFF0000)	/* Frame Length */
+#define RX_STS_ES_		(0x00008000)	/* Error Summary */
+#define RX_STS_BF_		(0x00002000)	/* Broadcast Frame */
+#define RX_STS_LE_		(0x00001000)	/* Length Error */
+#define RX_STS_RF_		(0x00000800)	/* Runt Frame */
+#define RX_STS_MF_		(0x00000400)	/* Multicast Frame */
+#define RX_STS_TL_		(0x00000080)	/* Frame too long */
+#define RX_STS_CS_		(0x00000040)	/* Collision Seen */
+#define RX_STS_FT_		(0x00000020)	/* Frame Type */
+#define RX_STS_RW_		(0x00000010)	/* Receive Watchdog */
+#define RX_STS_ME_		(0x00000008)	/* MII Error */
+#define RX_STS_DB_		(0x00000004)	/* Dribbling */
+#define RX_STS_CRC_		(0x00000002)	/* CRC Error */
+
+/* SCSRs - System Control and Status Registers */
+/* Device ID and Revision Register */
+#define ID_REV			(0x00)
+#define ID_REV_CHIP_ID_MASK_	(0xFFFF0000)
+#define ID_REV_CHIP_REV_MASK_	(0x0000FFFF)
+#define ID_REV_CHIP_ID_9500_	(0x9500)
+#define ID_REV_CHIP_ID_9500A_	(0x9E00)
+#define ID_REV_CHIP_ID_9512_	(0xEC00)
+#define ID_REV_CHIP_ID_9530_	(0x9530)
+#define ID_REV_CHIP_ID_89530_	(0x9E08)
+#define ID_REV_CHIP_ID_9730_	(0x9730)
+
+/* Interrupt Status Register */
+#define INT_STS			(0x08)
+#define INT_STS_MAC_RTO_	(0x00040000)	/* MAC Reset Time Out */
+#define INT_STS_TX_STOP_	(0x00020000)	/* TX Stopped */
+#define INT_STS_RX_STOP_	(0x00010000)	/* RX Stopped */
+#define INT_STS_PHY_INT_	(0x00008000)	/* PHY Interrupt */
+#define INT_STS_TXE_		(0x00004000)	/* Transmitter Error */
+#define INT_STS_TDFU_		(0x00002000)	/* TX Data FIFO Underrun */
+#define INT_STS_TDFO_		(0x00001000)	/* TX Data FIFO Overrun */
+#define INT_STS_RXDF_		(0x00000800)	/* RX Dropped Frame */
+#define INT_STS_GPIOS_		(0x000007FF)	/* GPIOs Interrupts */
+#define INT_STS_CLEAR_ALL_	(0xFFFFFFFF)
+
+/* Receive Configuration Register */
+#define RX_CFG			(0x0C)
+#define RX_FIFO_FLUSH_		(0x00000001)	/* Receive FIFO Flush */
+
+/* Transmit Configuration Register */
+#define TX_CFG			(0x10)
+#define TX_CFG_ON_		(0x00000004)	/* Transmitter Enable */
+#define TX_CFG_STOP_		(0x00000002)	/* Stop Transmitter */
+#define TX_CFG_FIFO_FLUSH_	(0x00000001)	/* Transmit FIFO Flush */
+
+/* Hardware Configuration Register */
+#define HW_CFG			(0x14)
+#define HW_CFG_BIR_		(0x00001000)	/* Bulk In Empty Response */
+#define HW_CFG_LEDB_		(0x00000800)	/* Activity LED 80ms Bypass */
+#define HW_CFG_RXDOFF_		(0x00000600)	/* RX Data Offset */
+#define HW_CFG_SBP_		(0x00000100)	/* Stall Bulk Out Pipe Dis. */
+#define HW_CFG_IME_		(0x00000080)	/* Internal MII Visi. Enable */
+#define HW_CFG_DRP_		(0x00000040)	/* Discard Errored RX Frame */
+#define HW_CFG_MEF_		(0x00000020)	/* Mult. ETH Frames/USB pkt */
+#define HW_CFG_ETC_		(0x00000010)	/* EEPROM Timeout Control */
+#define HW_CFG_LRST_		(0x00000008)	/* Soft Lite Reset */
+#define HW_CFG_PSEL_		(0x00000004)	/* External PHY Select */
+#define HW_CFG_BCE_		(0x00000002)	/* Burst Cap Enable */
+#define HW_CFG_SRST_		(0x00000001)	/* Soft Reset */
+
+/* Receive FIFO Information Register */
+#define RX_FIFO_INF		(0x18)
+#define RX_FIFO_INF_USED_	(0x0000FFFF)	/* RX Data FIFO Used Space */
+
+/* Transmit FIFO Information Register */
+#define TX_FIFO_INF		(0x1C)
+#define TX_FIFO_INF_FREE_	(0x0000FFFF)	/* TX Data FIFO Free Space */
+
+/* Power Management Control Register */
+#define PM_CTRL			(0x20)
+#define PM_CTL_RES_CLR_WKP_STS	(0x00000200)	/* Resume Clears Wakeup STS */
+#define PM_CTL_RES_CLR_WKP_EN	(0x00000100)	/* Resume Clears Wkp Enables */
+#define PM_CTL_DEV_RDY_		(0x00000080)	/* Device Ready */
+#define PM_CTL_SUS_MODE_	(0x00000060)	/* Suspend Mode */
+#define PM_CTL_SUS_MODE_0	(0x00000000)
+#define PM_CTL_SUS_MODE_1	(0x00000020)
+#define PM_CTL_SUS_MODE_2	(0x00000040)
+#define PM_CTL_SUS_MODE_3	(0x00000060)
+#define PM_CTL_PHY_RST_		(0x00000010)	/* PHY Reset */
+#define PM_CTL_WOL_EN_		(0x00000008)	/* Wake On Lan Enable */
+#define PM_CTL_ED_EN_		(0x00000004)	/* Energy Detect Enable */
+#define PM_CTL_WUPS_		(0x00000003)	/* Wake Up Status */
+#define PM_CTL_WUPS_NO_		(0x00000000)	/* No Wake Up Event Detected */
+#define PM_CTL_WUPS_ED_		(0x00000001)	/* Energy Detect */
+#define PM_CTL_WUPS_WOL_	(0x00000002)	/* Wake On Lan */
+#define PM_CTL_WUPS_MULTI_	(0x00000003)	/* Multiple Events Occurred */
+
+/* LED General Purpose IO Configuration Register */
+#define LED_GPIO_CFG		(0x24)
+#define LED_GPIO_CFG_SPD_LED	(0x01000000)	/* GPIOz as Speed LED */
+#define LED_GPIO_CFG_LNK_LED	(0x00100000)	/* GPIOy as Link LED */
+#define LED_GPIO_CFG_FDX_LED	(0x00010000)	/* GPIOx as Full Duplex LED */
+
+/* General Purpose IO Configuration Register */
+#define GPIO_CFG		(0x28)
+
+/* Automatic Flow Control Configuration Register */
+#define AFC_CFG			(0x2C)
+#define AFC_CFG_HI_		(0x00FF0000)	/* Auto Flow Ctrl High Level */
+#define AFC_CFG_LO_		(0x0000FF00)	/* Auto Flow Ctrl Low Level */
+#define AFC_CFG_BACK_DUR_	(0x000000F0)	/* Back Pressure Duration */
+#define AFC_CFG_FC_MULT_	(0x00000008)	/* Flow Ctrl on Mcast Frame */
+#define AFC_CFG_FC_BRD_		(0x00000004)	/* Flow Ctrl on Bcast Frame */
+#define AFC_CFG_FC_ADD_		(0x00000002)	/* Flow Ctrl on Addr. Decode */
+#define AFC_CFG_FC_ANY_		(0x00000001)	/* Flow Ctrl on Any Frame */
+/* Hi watermark = 15.5Kb (~10 mtu pkts) */
+/* low watermark = 3k (~2 mtu pkts) */
+/* backpressure duration = ~ 350us */
+/* Apply FC on any frame. */
+#define AFC_CFG_DEFAULT		(0x00F830A1)
+
+/* EEPROM Command Register */
+#define E2P_CMD			(0x30)
+#define E2P_CMD_BUSY_		(0x80000000)	/* E2P Controller Busy */
+#define E2P_CMD_MASK_		(0x70000000)	/* Command Mask (see below) */
+#define E2P_CMD_READ_		(0x00000000)	/* Read Location */
+#define E2P_CMD_EWDS_		(0x10000000)	/* Erase/Write Disable */
+#define E2P_CMD_EWEN_		(0x20000000)	/* Erase/Write Enable */
+#define E2P_CMD_WRITE_		(0x30000000)	/* Write Location */
+#define E2P_CMD_WRAL_		(0x40000000)	/* Write All */
+#define E2P_CMD_ERASE_		(0x50000000)	/* Erase Location */
+#define E2P_CMD_ERAL_		(0x60000000)	/* Erase All */
+#define E2P_CMD_RELOAD_		(0x70000000)	/* Data Reload */
+#define E2P_CMD_TIMEOUT_	(0x00000400)	/* Set if no resp within 30ms */
+#define E2P_CMD_LOADED_		(0x00000200)	/* Valid EEPROM found */
+#define E2P_CMD_ADDR_		(0x000001FF)	/* Byte aligned address */
+
+#define MAX_EEPROM_SIZE		(512)
+
+/* EEPROM Data Register */
+#define E2P_DATA		(0x34)
+#define E2P_DATA_MASK_		(0x000000FF)	/* EEPROM Data Mask */
+
+/* Burst Cap Register */
+#define BURST_CAP		(0x38)
+#define BURST_CAP_MASK_		(0x000000FF)	/* Max burst sent by the UTX */
+
+/* Configuration Straps Status Register */
+#define	STRAP_STATUS			(0x3C)
+#define	STRAP_STATUS_PWR_SEL_		(0x00000020) /* Device self-powered */
+#define	STRAP_STATUS_AMDIX_EN_		(0x00000010) /* Auto-MDIX Enabled */
+#define	STRAP_STATUS_PORT_SWAP_		(0x00000008) /* USBD+/USBD- Swapped */
+#define	STRAP_STATUS_EEP_SIZE_		(0x00000004) /* EEPROM Size */
+#define	STRAP_STATUS_RMT_WKP_		(0x00000002) /* Remote Wkp supported */
+#define	STRAP_STATUS_EEP_DISABLE_	(0x00000001) /* EEPROM Disabled */
+
+/* Data Port Select Register */
+#define DP_SEL			(0x40)
+
+/* Data Port Command Register */
+#define DP_CMD			(0x44)
+
+/* Data Port Address Register */
+#define DP_ADDR			(0x48)
+
+/* Data Port Data 0 Register */
+#define DP_DATA0		(0x4C)
+
+/* Data Port Data 1 Register */
+#define DP_DATA1		(0x50)
+
+/* General Purpose IO Wake Enable and Polarity Register */
+#define GPIO_WAKE		(0x64)
+
+/* Interrupt Endpoint Control Register */
+#define INT_EP_CTL		(0x68)
+#define INT_EP_CTL_INTEP_	(0x80000000)	/* Always TX Interrupt PKT */
+#define INT_EP_CTL_MAC_RTO_	(0x00080000)	/* MAC Reset Time Out */
+#define INT_EP_CTL_RX_FIFO_	(0x00040000)	/* RX FIFO Has Frame */
+#define INT_EP_CTL_TX_STOP_	(0x00020000)	/* TX Stopped */
+#define INT_EP_CTL_RX_STOP_	(0x00010000)	/* RX Stopped */
+#define INT_EP_CTL_PHY_INT_	(0x00008000)	/* PHY Interrupt */
+#define INT_EP_CTL_TXE_		(0x00004000)	/* TX Error */
+#define INT_EP_CTL_TDFU_	(0x00002000)	/* TX Data FIFO Underrun */
+#define INT_EP_CTL_TDFO_	(0x00001000)	/* TX Data FIFO Overrun */
+#define INT_EP_CTL_RXDF_	(0x00000800)	/* RX Dropped Frame */
+#define INT_EP_CTL_GPIOS_	(0x000007FF)	/* GPIOs Interrupt Enable */
+
+/* Bulk In Delay Register (units of 16.667ns, until ~1092µs) */
+#define BULK_IN_DLY		(0x6C)
+
+/* MAC CSRs - MAC Control and Status Registers */
+/* MAC Control Register */
+#define MAC_CR			(0x100)
+#define MAC_CR_RXALL_		(0x80000000)	/* Receive All Mode */
+#define MAC_CR_RCVOWN_		(0x00800000)	/* Disable Receive Own */
+#define MAC_CR_LOOPBK_		(0x00200000)	/* Loopback Operation Mode */
+#define MAC_CR_FDPX_		(0x00100000)	/* Full Duplex Mode */
+#define MAC_CR_MCPAS_		(0x00080000)	/* Pass All Multicast */
+#define MAC_CR_PRMS_		(0x00040000)	/* Promiscuous Mode */
+#define MAC_CR_INVFILT_		(0x00020000)	/* Inverse Filtering */
+#define MAC_CR_PASSBAD_		(0x00010000)	/* Pass Bad Frames */
+#define MAC_CR_HFILT_		(0x00008000)	/* Hash Only Filtering Mode */
+#define MAC_CR_HPFILT_		(0x00002000)	/* Hash/Perfect Filt. Mode */
+#define MAC_CR_LCOLL_		(0x00001000)	/* Late Collision Control */
+#define MAC_CR_BCAST_		(0x00000800)	/* Disable Broadcast Frames */
+#define MAC_CR_DISRTY_		(0x00000400)	/* Disable Retry */
+#define MAC_CR_PADSTR_		(0x00000100)	/* Automatic Pad Stripping */
+#define MAC_CR_BOLMT_MASK	(0x000000C0)	/* BackOff Limit */
+#define MAC_CR_DFCHK_		(0x00000020)	/* Deferral Check */
+#define MAC_CR_TXEN_		(0x00000008)	/* Transmitter Enable */
+#define MAC_CR_RXEN_		(0x00000004)	/* Receiver Enable */
+
+/* MAC Address High Register */
+#define ADDRH			(0x104)
+
+/* MAC Address Low Register */
+#define ADDRL			(0x108)
+
+/* Multicast Hash Table High Register */
+#define HASHH			(0x10C)
+
+/* Multicast Hash Table Low Register */
+#define HASHL			(0x110)
+
+/* MII Access Register */
+#define MII_ADDR		(0x114)
+#define MII_WRITE_		(0x02)
+#define MII_BUSY_		(0x01)
+#define MII_READ_		(0x00) /* ~of MII Write bit */
+
+/* MII Data Register */
+#define MII_DATA		(0x118)
+
+/* Flow Control Register */
+#define FLOW			(0x11C)
+#define FLOW_FCPT_		(0xFFFF0000)	/* Pause Time */
+#define FLOW_FCPASS_		(0x00000004)	/* Pass Control Frames */
+#define FLOW_FCEN_		(0x00000002)	/* Flow Control Enable */
+#define FLOW_FCBSY_		(0x00000001)	/* Flow Control Busy */
+
+/* VLAN1 Tag Register */
+#define VLAN1			(0x120)
+
+/* VLAN2 Tag Register */
+#define VLAN2			(0x124)
+
+/* Wake Up Frame Filter Register */
+#define WUFF			(0x128)
+#define LAN9500_WUFF_NUM	(4)
+#define LAN9500A_WUFF_NUM	(8)
+
+/* Wake Up Control and Status Register */
+#define WUCSR			(0x12C)
+#define WUCSR_WFF_PTR_RST_	(0x80000000)	/* WFrame Filter Pointer Rst */
+#define WUCSR_GUE_		(0x00000200)	/* Global Unicast Enable */
+#define WUCSR_WUFR_		(0x00000040)	/* Wakeup Frame Received */
+#define WUCSR_MPR_		(0x00000020)	/* Magic Packet Received */
+#define WUCSR_WAKE_EN_		(0x00000004)	/* Wakeup Frame Enable */
+#define WUCSR_MPEN_		(0x00000002)	/* Magic Packet Enable */
+
+/* Checksum Offload Engine Control Register */
+#define COE_CR			(0x130)
+#define Tx_COE_EN_		(0x00010000)	/* TX Csum Offload Enable */
+#define Rx_COE_MODE_		(0x00000002)	/* RX Csum Offload Mode */
+#define Rx_COE_EN_		(0x00000001)	/* RX Csum Offload Enable */
+
+/* Vendor-specific PHY Definitions (via MII access) */
+/* EDPD NLP / crossover time configuration (LAN9500A only) */
+#define PHY_EDPD_CONFIG			(16)
+#define PHY_EDPD_CONFIG_TX_NLP_EN_	((u16)0x8000)
+#define PHY_EDPD_CONFIG_TX_NLP_1000_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_TX_NLP_768_	((u16)0x2000)
+#define PHY_EDPD_CONFIG_TX_NLP_512_	((u16)0x4000)
+#define PHY_EDPD_CONFIG_TX_NLP_256_	((u16)0x6000)
+#define PHY_EDPD_CONFIG_RX_1_NLP_	((u16)0x1000)
+#define PHY_EDPD_CONFIG_RX_NLP_64_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_RX_NLP_256_	((u16)0x0400)
+#define PHY_EDPD_CONFIG_RX_NLP_512_	((u16)0x0800)
+#define PHY_EDPD_CONFIG_RX_NLP_1000_	((u16)0x0C00)
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_	((u16)0x0001)
+#define PHY_EDPD_CONFIG_DEFAULT		(PHY_EDPD_CONFIG_TX_NLP_EN_ | \
+					 PHY_EDPD_CONFIG_TX_NLP_768_ | \
+					 PHY_EDPD_CONFIG_RX_1_NLP_)
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN_	((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON_		((u16)0x0002)
+
+/* Control/Status Indication Register */
+#define SPECIAL_CTRL_STS		(27)
+#define SPECIAL_CTRL_STS_OVRRD_AMDIX_	((u16)0x8000)
+#define SPECIAL_CTRL_STS_AMDIX_ENABLE_	((u16)0x4000)
+#define SPECIAL_CTRL_STS_AMDIX_STATE_	((u16)0x2000)
+
+/* Interrupt Source Register */
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN_		((u16)0x0010)
+
+/* Interrupt Mask Register */
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN_		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT_		(PHY_INT_MASK_ANEG_COMP_ | \
+					 PHY_INT_MASK_LINK_DOWN_)
+/* PHY Special Control/Status Register */
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD_		((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF_		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL_		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF_	((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL_	((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_MAC_RTO_		((u32)BIT(18))	/* MAC Reset Time Out */
+#define INT_ENP_TX_STOP_		((u32)BIT(17))	/* TX Stopped */
+#define INT_ENP_RX_STOP_		((u32)BIT(16))	/* RX Stopped */
+#define INT_ENP_PHY_INT_		((u32)BIT(15))	/* PHY Interrupt */
+#define INT_ENP_TXE_			((u32)BIT(14))	/* TX Error */
+#define INT_ENP_TDFU_			((u32)BIT(13))	/* TX FIFO Underrun */
+#define INT_ENP_TDFO_			((u32)BIT(12))	/* TX FIFO Overrun */
+#define INT_ENP_RXDF_			((u32)BIT(11))	/* RX Dropped Frame */
+
+#endif /* _SMSC95XX_H */