Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 207 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/wil6210/fw.h b/drivers/net/wireless/ath/wil6210/fw.h
new file mode 100644
index 000000000..440614d61
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/fw.h
@@ -0,0 +1,207 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2014,2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ */
+#ifndef __WIL_FW_H__
+#define __WIL_FW_H__
+
+#define WIL_FW_SIGNATURE (0x36323130) /* '0126' */
+#define WIL_FW_FMT_VERSION (1) /* format version driver supports */
+
+enum wil_fw_record_type {
+	wil_fw_type_comment = 1,
+	wil_fw_type_data = 2,
+	wil_fw_type_fill = 3,
+	wil_fw_type_action = 4,
+	wil_fw_type_verify = 5,
+	wil_fw_type_file_header = 6,
+	wil_fw_type_direct_write = 7,
+	wil_fw_type_gateway_data = 8,
+	wil_fw_type_gateway_data4 = 9,
+};
+
+struct wil_fw_record_head {
+	__le16 type; /* enum wil_fw_record_type */
+	__le16 flags; /* to be defined */
+	__le32 size; /* whole record, bytes after head */
+} __packed;
+
+/* data block. write starting from @addr
+ * data_size inferred from the @head.size. For this case,
+ * data_size = @head.size - offsetof(struct wil_fw_record_data, data)
+ */
+struct wil_fw_record_data { /* type == wil_fw_type_data */
+	__le32 addr;
+	__le32 data[]; /* [data_size], see above */
+} __packed;
+
+/* fill with constant @value, @size bytes starting from @addr */
+struct wil_fw_record_fill { /* type == wil_fw_type_fill */
+	__le32 addr;
+	__le32 value;
+	__le32 size;
+} __packed;
+
+/* free-form comment
+ * for informational purpose, data_size is @head.size from record header
+ */
+struct wil_fw_record_comment { /* type == wil_fw_type_comment */
+	u8 data[0]; /* free-form data [data_size], see above */
+} __packed;
+
+/* Comment header - common for all comment record types */
+struct wil_fw_record_comment_hdr {
+	__le32 magic;
+};
+
+/* FW capabilities encoded inside a comment record */
+#define WIL_FW_CAPABILITIES_MAGIC (0xabcddcba)
+struct wil_fw_record_capabilities { /* type == wil_fw_type_comment */
+	/* identifies capabilities record */
+	struct wil_fw_record_comment_hdr hdr;
+	/* capabilities (variable size), see enum wmi_fw_capability */
+	u8 capabilities[];
+} __packed;
+
+/* FW VIF concurrency encoded inside a comment record
+ * Format is similar to wiphy->iface_combinations
+ */
+#define WIL_FW_CONCURRENCY_MAGIC (0xfedccdef)
+#define WIL_FW_CONCURRENCY_REC_VER	1
+struct wil_fw_concurrency_limit {
+	__le16 max; /* maximum number of interfaces of these types */
+	__le16 types; /* interface types (bit mask of enum nl80211_iftype) */
+} __packed;
+
+struct wil_fw_concurrency_combo {
+	u8 n_limits; /* number of wil_fw_concurrency_limit entries */
+	u8 max_interfaces; /* max number of concurrent interfaces allowed */
+	u8 n_diff_channels; /* total number of different channels allowed */
+	u8 same_bi; /* for APs, 1 if all APs must have same BI */
+	/* keep last - concurrency limits, variable size by n_limits */
+	struct wil_fw_concurrency_limit limits[];
+} __packed;
+
+struct wil_fw_record_concurrency { /* type == wil_fw_type_comment */
+	/* identifies concurrency record */
+	__le32 magic;
+	/* structure version, currently always 1 */
+	u8 version;
+	/* maximum number of supported MIDs _in addition_ to MID 0 */
+	u8 n_mids;
+	/* number of concurrency combinations that follow */
+	__le16 n_combos;
+	/* keep last - combinations, variable size by n_combos */
+	struct wil_fw_concurrency_combo combos[];
+} __packed;
+
+/* brd file info encoded inside a comment record */
+#define WIL_BRD_FILE_MAGIC (0xabcddcbb)
+
+struct brd_info {
+	__le32 base_addr;
+	__le32 max_size_bytes;
+} __packed;
+
+struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
+	/* identifies brd file record */
+	struct wil_fw_record_comment_hdr hdr;
+	__le32 version;
+	struct brd_info brd_info[];
+} __packed;
+
+/* perform action
+ * data_size = @head.size - offsetof(struct wil_fw_record_action, data)
+ */
+struct wil_fw_record_action { /* type == wil_fw_type_action */
+	__le32 action; /* action to perform: reset, wait for fw ready etc. */
+	__le32 data[]; /* action specific, [data_size], see above */
+} __packed;
+
+/* data block for struct wil_fw_record_direct_write */
+struct wil_fw_data_dwrite {
+	__le32 addr;
+	__le32 value;
+	__le32 mask;
+} __packed;
+
+/* write @value to the @addr,
+ * preserve original bits accordingly to the @mask
+ * data_size is @head.size where @head is record header
+ */
+struct wil_fw_record_direct_write { /* type == wil_fw_type_direct_write */
+	struct wil_fw_data_dwrite data[0];
+} __packed;
+
+/* verify condition: [@addr] & @mask == @value
+ * if condition not met, firmware download fails
+ */
+struct wil_fw_record_verify { /* type == wil_fw_verify */
+	__le32 addr; /* read from this address */
+	__le32 value; /* reference value */
+	__le32 mask; /* mask for verification */
+} __packed;
+
+/* file header
+ * First record of every file
+ */
+/* the FW version prefix in the comment */
+#define WIL_FW_VERSION_PREFIX "FW version: "
+#define WIL_FW_VERSION_PREFIX_LEN (sizeof(WIL_FW_VERSION_PREFIX) - 1)
+struct wil_fw_record_file_header {
+	__le32 signature ; /* Wilocity signature */
+	__le32 reserved;
+	__le32 crc; /* crc32 of the following data  */
+	__le32 version; /* format version */
+	__le32 data_len; /* total data in file, including this record */
+	u8 comment[32]; /* short description */
+} __packed;
+
+/* 1-dword gateway */
+/* data block for the struct wil_fw_record_gateway_data */
+struct wil_fw_data_gw {
+	__le32 addr;
+	__le32 value;
+} __packed;
+
+/* gateway write block.
+ * write starting address and values from the data buffer
+ * through the gateway
+ * data_size inferred from the @head.size. For this case,
+ * data_size = @head.size - offsetof(struct wil_fw_record_gateway_data, data)
+ */
+struct wil_fw_record_gateway_data { /* type == wil_fw_type_gateway_data */
+	__le32 gateway_addr_addr;
+	__le32 gateway_value_addr;
+	__le32 gateway_cmd_addr;
+	__le32 gateway_ctrl_address;
+#define WIL_FW_GW_CTL_BUSY	BIT(29) /* gateway busy performing operation */
+#define WIL_FW_GW_CTL_RUN	BIT(30) /* start gateway operation */
+	__le32 command;
+	struct wil_fw_data_gw data[]; /* total size [data_size], see above */
+} __packed;
+
+/* 4-dword gateway */
+/* data block for the struct wil_fw_record_gateway_data4 */
+struct wil_fw_data_gw4 {
+	__le32 addr;
+	__le32 value[4];
+} __packed;
+
+/* gateway write block.
+ * write starting address and values from the data buffer
+ * through the gateway
+ * data_size inferred from the @head.size. For this case,
+ * data_size = @head.size - offsetof(struct wil_fw_record_gateway_data4, data)
+ */
+struct wil_fw_record_gateway_data4 { /* type == wil_fw_type_gateway_data4 */
+	__le32 gateway_addr_addr;
+	__le32 gateway_value_addr[4];
+	__le32 gateway_cmd_addr;
+	__le32 gateway_ctrl_address; /* same logic as for 1-dword gw */
+	__le32 command;
+	struct wil_fw_data_gw4 data[]; /* total size [data_size], see above */
+} __packed;
+
+#endif /* __WIL_FW_H__ */