Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 242 insertions, 0 deletions

diff --git a/drivers/net/wireless/intersil/p54/eeprom.h b/drivers/net/wireless/intersil/p54/eeprom.h
new file mode 100644
index 000000000..641c4e798
--- /dev/null
+++ b/drivers/net/wireless/intersil/p54/eeprom.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * eeprom specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
+ *   Copyright (C) 2007 Conexant Systems, Inc.
+ *
+ * - islmvc driver
+ *   Copyright (C) 2001 Intersil Americas Inc.
+ */
+
+#ifndef EEPROM_H
+#define EEPROM_H
+
+/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
+
+struct pda_entry {
+	__le16 len;	/* includes both code and data */
+	__le16 code;
+	u8 data[];
+} __packed;
+
+struct eeprom_pda_wrap {
+	__le32 magic;
+	__le16 pad;
+	__le16 len;
+	__le32 arm_opcode;
+	u8 data[];
+} __packed;
+
+struct p54_iq_autocal_entry {
+	__le16 iq_param[4];
+} __packed;
+
+struct pda_iq_autocal_entry {
+	__le16 freq;
+	struct p54_iq_autocal_entry params;
+} __packed;
+
+struct pda_channel_output_limit {
+	__le16 freq;
+	u8 val_bpsk;
+	u8 val_qpsk;
+	u8 val_16qam;
+	u8 val_64qam;
+	u8 rate_set_mask;
+	u8 rate_set_size;
+} __packed;
+
+struct pda_channel_output_limit_point_longbow {
+	__le16 val_bpsk;
+	__le16 val_qpsk;
+	__le16 val_16qam;
+	__le16 val_64qam;
+} __packed;
+
+struct pda_channel_output_limit_longbow {
+	__le16 freq;
+	struct pda_channel_output_limit_point_longbow point[3];
+} __packed;
+
+struct pda_pa_curve_data_sample_rev0 {
+	u8 rf_power;
+	u8 pa_detector;
+	u8 pcv;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev1 {
+	u8 rf_power;
+	u8 pa_detector;
+	u8 data_barker;
+	u8 data_bpsk;
+	u8 data_qpsk;
+	u8 data_16qam;
+	u8 data_64qam;
+} __packed;
+
+struct pda_pa_curve_data {
+	u8 cal_method_rev;
+	u8 channels;
+	u8 points_per_channel;
+	u8 padding;
+	u8 data[];
+} __packed;
+
+struct pda_rssi_cal_ext_entry {
+	__le16 freq;
+	__le16 mul;
+	__le16 add;
+} __packed;
+
+struct pda_rssi_cal_entry {
+	__le16 mul;
+	__le16 add;
+} __packed;
+
+struct pda_country {
+	u8 regdomain;
+	u8 alpha2[2];
+	u8 flags;
+} __packed;
+
+struct pda_antenna_gain {
+	DECLARE_FLEX_ARRAY(struct {
+		u8 gain_5GHz;	/* 0.25 dBi units */
+		u8 gain_2GHz;	/* 0.25 dBi units */
+	} __packed, antenna);
+} __packed;
+
+struct pda_custom_wrapper {
+	__le16 entries;
+	__le16 entry_size;
+	__le16 offset;
+	__le16 len;
+	u8 data[];
+} __packed;
+
+/*
+ * this defines the PDR codes used to build PDAs as defined in document
+ * number 553155. The current implementation mirrors version 1.1 of the
+ * document and lists only PDRs supported by the ARM platform.
+ */
+
+/* common and choice range (0x0000 - 0x0fff) */
+#define PDR_END					0x0000
+#define PDR_MANUFACTURING_PART_NUMBER		0x0001
+#define PDR_PDA_VERSION				0x0002
+#define PDR_NIC_SERIAL_NUMBER			0x0003
+#define PDR_NIC_RAM_SIZE			0x0005
+#define PDR_RFMODEM_SUP_RANGE			0x0006
+#define PDR_PRISM_MAC_SUP_RANGE			0x0007
+#define PDR_NIC_ID				0x0008
+
+#define PDR_MAC_ADDRESS				0x0101
+#define PDR_REGULATORY_DOMAIN_LIST		0x0103 /* obsolete */
+#define PDR_ALLOWED_CHAN_SET			0x0104
+#define PDR_DEFAULT_CHAN			0x0105
+#define PDR_TEMPERATURE_TYPE			0x0107
+
+#define PDR_IFR_SETTING				0x0200
+#define PDR_RFR_SETTING				0x0201
+#define PDR_3861_BASELINE_REG_SETTINGS		0x0202
+#define PDR_3861_SHADOW_REG_SETTINGS		0x0203
+#define PDR_3861_IFRF_REG_SETTINGS		0x0204
+
+#define PDR_3861_CHAN_CALIB_SET_POINTS		0x0300
+#define PDR_3861_CHAN_CALIB_INTEGRATOR		0x0301
+
+#define PDR_3842_PRISM_II_NIC_CONFIG		0x0400
+#define PDR_PRISM_USB_ID			0x0401
+#define PDR_PRISM_PCI_ID			0x0402
+#define PDR_PRISM_PCI_IF_CONFIG			0x0403
+#define PDR_PRISM_PCI_PM_CONFIG			0x0404
+
+#define PDR_3861_MF_TEST_CHAN_SET_POINTS	0x0900
+#define PDR_3861_MF_TEST_CHAN_INTEGRATORS	0x0901
+
+/* ARM range (0x1000 - 0x1fff) */
+#define PDR_COUNTRY_INFORMATION			0x1000 /* obsolete */
+#define PDR_INTERFACE_LIST			0x1001
+#define PDR_HARDWARE_PLATFORM_COMPONENT_ID	0x1002
+#define PDR_OEM_NAME				0x1003
+#define PDR_PRODUCT_NAME			0x1004
+#define PDR_UTF8_OEM_NAME			0x1005
+#define PDR_UTF8_PRODUCT_NAME			0x1006
+#define PDR_COUNTRY_LIST			0x1007
+#define PDR_DEFAULT_COUNTRY			0x1008
+
+#define PDR_ANTENNA_GAIN			0x1100
+
+#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA	0x1901
+#define PDR_RSSI_LINEAR_APPROXIMATION		0x1902
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS	0x1903
+#define PDR_PRISM_PA_CAL_CURVE_DATA		0x1904
+#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND	0x1905
+#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION		0x1906
+#define PDR_REGULATORY_POWER_LIMITS		0x1907
+#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED	0x1908
+#define PDR_RADIATED_TRANSMISSION_CORRECTION	0x1909
+#define PDR_PRISM_TX_IQ_CALIBRATION		0x190a
+
+/* reserved range (0x2000 - 0x7fff) */
+
+/* customer range (0x8000 - 0xffff) */
+#define PDR_BASEBAND_REGISTERS				0x8000
+#define PDR_PER_CHANNEL_BASEBAND_REGISTERS		0x8001
+
+/* used by our modificated eeprom image */
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM		0xDEAD
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2		0xCAFF
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM	0xBEEF
+#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM		0xB05D
+
+/* Interface Definitions */
+#define PDR_INTERFACE_ROLE_SERVER	0x0000
+#define PDR_INTERFACE_ROLE_CLIENT	0x0001
+
+/* PDR definitions for default country & country list */
+#define PDR_COUNTRY_CERT_CODE		0x80
+#define PDR_COUNTRY_CERT_CODE_REAL	0x00
+#define PDR_COUNTRY_CERT_CODE_PSEUDO	0x80
+#define PDR_COUNTRY_CERT_BAND		0x40
+#define PDR_COUNTRY_CERT_BAND_2GHZ	0x00
+#define PDR_COUNTRY_CERT_BAND_5GHZ	0x40
+#define PDR_COUNTRY_CERT_IODOOR		0x30
+#define PDR_COUNTRY_CERT_IODOOR_BOTH	0x00
+#define PDR_COUNTRY_CERT_IODOOR_INDOOR	0x20
+#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR	0x30
+#define PDR_COUNTRY_CERT_INDEX		0x0f
+
+/* Specific LMAC FW/HW variant definitions */
+#define PDR_SYNTH_FRONTEND_MASK		0x0007
+#define PDR_SYNTH_FRONTEND_DUETTE3	0x0001
+#define PDR_SYNTH_FRONTEND_DUETTE2	0x0002
+#define PDR_SYNTH_FRONTEND_FRISBEE	0x0003
+#define PDR_SYNTH_FRONTEND_XBOW		0x0004
+#define PDR_SYNTH_FRONTEND_LONGBOW	0x0005
+#define PDR_SYNTH_IQ_CAL_MASK		0x0018
+#define PDR_SYNTH_IQ_CAL_PA_DETECTOR	0x0000
+#define PDR_SYNTH_IQ_CAL_DISABLED	0x0008
+#define PDR_SYNTH_IQ_CAL_ZIF		0x0010
+#define PDR_SYNTH_FAA_SWITCH_MASK	0x0020
+#define PDR_SYNTH_FAA_SWITCH_ENABLED	0x0020
+#define PDR_SYNTH_24_GHZ_MASK		0x0040
+#define PDR_SYNTH_24_GHZ_DISABLED	0x0040
+#define PDR_SYNTH_5_GHZ_MASK		0x0080
+#define PDR_SYNTH_5_GHZ_DISABLED	0x0080
+#define PDR_SYNTH_RX_DIV_MASK		0x0100
+#define PDR_SYNTH_RX_DIV_SUPPORTED	0x0100
+#define PDR_SYNTH_TX_DIV_MASK		0x0200
+#define PDR_SYNTH_TX_DIV_SUPPORTED	0x0200
+#define PDR_SYNTH_ASM_MASK		0x0400
+#define PDR_SYNTH_ASM_XSWON		0x0400
+
+#endif /* EEPROM_H */