Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 706 insertions, 0 deletions

diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
new file mode 100644
index 000000000..19152fd44
--- /dev/null
+++ b/drivers/net/wireless/intersil/p54/p54spi.c
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008       Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This driver is a port from stlc45xx:
+ *	Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include "p54spi.h"
+#include "p54.h"
+
+#include "lmac.h"
+
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
+#include "p54spi_eeprom.h"
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
+
+MODULE_FIRMWARE("3826.arm");
+
+/* gpios should be handled in board files and provided via platform data,
+ * but because it's currently impossible for p54spi to have a header file
+ * in include/linux, let's use module paramaters for now
+ */
+
+static int p54spi_gpio_power = 97;
+module_param(p54spi_gpio_power, int, 0444);
+MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
+
+static int p54spi_gpio_irq = 87;
+module_param(p54spi_gpio_irq, int, 0444);
+MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
+
+static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
+			      void *buf, size_t len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	__le16 addr;
+
+	/* We first push the address */
+	addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	spi_sync(priv->spi, &m);
+}
+
+
+static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
+			     const void *buf, size_t len)
+{
+	struct spi_transfer t[3];
+	struct spi_message m;
+	__le16 addr;
+
+	/* We first push the address */
+	addr = cpu_to_le16(address << 8);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = len & ~1;
+	spi_message_add_tail(&t[1], &m);
+
+	if (len % 2) {
+		__le16 last_word;
+		last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
+
+		t[2].tx_buf = &last_word;
+		t[2].len = sizeof(last_word);
+		spi_message_add_tail(&t[2], &m);
+	}
+
+	spi_sync(priv->spi, &m);
+}
+
+static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
+{
+	__le32 val;
+
+	p54spi_spi_read(priv, addr, &val, sizeof(val));
+
+	return le32_to_cpu(val);
+}
+
+static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
+{
+	p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
+{
+	p54spi_spi_write(priv, addr, &val, sizeof(val));
+}
+
+static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
+{
+	int i;
+
+	for (i = 0; i < 2000; i++) {
+		u32 buffer = p54spi_read32(priv, reg);
+		if ((buffer & bits) == bits)
+			return 1;
+	}
+	return 0;
+}
+
+static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
+				const void *buf, size_t len)
+{
+	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
+		dev_err(&priv->spi->dev, "spi_write_dma not allowed "
+			"to DMA write.\n");
+		return -EAGAIN;
+	}
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
+		       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
+	p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
+	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
+	return 0;
+}
+
+static int p54spi_request_firmware(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	int ret;
+
+	/* FIXME: should driver use it's own struct device? */
+	ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
+
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
+		return ret;
+	}
+
+	ret = p54_parse_firmware(dev, priv->firmware);
+	if (ret) {
+		/* the firmware is released by the caller */
+		return ret;
+	}
+
+	return 0;
+}
+
+static int p54spi_request_eeprom(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	const struct firmware *eeprom;
+	int ret;
+
+	/* allow users to customize their eeprom.
+	 */
+
+	ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev);
+	if (ret < 0) {
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
+		dev_info(&priv->spi->dev, "loading default eeprom...\n");
+		ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
+				       sizeof(p54spi_eeprom));
+#else
+		dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
+	} else {
+		dev_info(&priv->spi->dev, "loading user eeprom...\n");
+		ret = p54_parse_eeprom(dev, (void *) eeprom->data,
+				       (int)eeprom->size);
+		release_firmware(eeprom);
+	}
+	return ret;
+}
+
+static int p54spi_upload_firmware(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	unsigned long fw_len, _fw_len;
+	unsigned int offset = 0;
+	int err = 0;
+	u8 *fw;
+
+	fw_len = priv->firmware->size;
+	fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	/* stop the device */
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+		       SPI_CTRL_STAT_START_HALTED));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE |
+		       SPI_CTRL_STAT_START_HALTED));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	while (fw_len > 0) {
+		_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
+
+		err = p54spi_spi_write_dma(priv, cpu_to_le32(
+					   ISL38XX_DEV_FIRMWARE_ADDR + offset),
+					   (fw + offset), _fw_len);
+		if (err < 0)
+			goto out;
+
+		fw_len -= _fw_len;
+		offset += _fw_len;
+	}
+
+	BUG_ON(fw_len != 0);
+
+	/* enable host interrupts */
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
+		       cpu_to_le32(SPI_HOST_INTS_DEFAULT));
+
+	/* boot the device */
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
+		       SPI_CTRL_STAT_RAM_BOOT));
+
+	msleep(TARGET_BOOT_SLEEP);
+
+	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
+		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
+	msleep(TARGET_BOOT_SLEEP);
+
+out:
+	kfree(fw);
+	return err;
+}
+
+static void p54spi_power_off(struct p54s_priv *priv)
+{
+	disable_irq(gpio_to_irq(p54spi_gpio_irq));
+	gpio_set_value(p54spi_gpio_power, 0);
+}
+
+static void p54spi_power_on(struct p54s_priv *priv)
+{
+	gpio_set_value(p54spi_gpio_power, 1);
+	enable_irq(gpio_to_irq(p54spi_gpio_irq));
+
+	/* need to wait a while before device can be accessed, the length
+	 * is just a guess
+	 */
+	msleep(10);
+}
+
+static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
+{
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
+}
+
+static int p54spi_wakeup(struct p54s_priv *priv)
+{
+	/* wake the chip */
+	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+		       cpu_to_le32(SPI_TARGET_INT_WAKEUP));
+
+	/* And wait for the READY interrupt */
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     SPI_HOST_INT_READY)) {
+		dev_err(&priv->spi->dev, "INT_READY timeout\n");
+		return -EBUSY;
+	}
+
+	p54spi_int_ack(priv, SPI_HOST_INT_READY);
+	return 0;
+}
+
+static inline void p54spi_sleep(struct p54s_priv *priv)
+{
+	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
+		       cpu_to_le32(SPI_TARGET_INT_SLEEP));
+}
+
+static void p54spi_int_ready(struct p54s_priv *priv)
+{
+	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
+		       SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
+
+	switch (priv->fw_state) {
+	case FW_STATE_BOOTING:
+		priv->fw_state = FW_STATE_READY;
+		complete(&priv->fw_comp);
+		break;
+	case FW_STATE_RESETTING:
+		priv->fw_state = FW_STATE_READY;
+		/* TODO: reinitialize state */
+		break;
+	default:
+		break;
+	}
+}
+
+static int p54spi_rx(struct p54s_priv *priv)
+{
+	struct sk_buff *skb;
+	u16 len;
+	u16 rx_head[2];
+#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
+
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
+
+	/* Read data size and first data word in one SPI transaction
+	 * This is workaround for firmware/DMA bug,
+	 * when first data word gets lost under high load.
+	 */
+	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
+	len = rx_head[0];
+
+	if (len == 0) {
+		p54spi_sleep(priv);
+		dev_err(&priv->spi->dev, "rx request of zero bytes\n");
+		return 0;
+	}
+
+	/* Firmware may insert up to 4 padding bytes after the lmac header,
+	 * but it does not amend the size of SPI data transfer.
+	 * Such packets has correct data size in header, thus referencing
+	 * past the end of allocated skb. Reserve extra 4 bytes for this case
+	 */
+	skb = dev_alloc_skb(len + 4);
+	if (!skb) {
+		p54spi_sleep(priv);
+		dev_err(&priv->spi->dev, "could not alloc skb");
+		return -ENOMEM;
+	}
+
+	if (len <= READAHEAD_SZ) {
+		skb_put_data(skb, rx_head + 1, len);
+	} else {
+		skb_put_data(skb, rx_head + 1, READAHEAD_SZ);
+		p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
+				skb_put(skb, len - READAHEAD_SZ),
+				len - READAHEAD_SZ);
+	}
+	p54spi_sleep(priv);
+	/* Put additional bytes to compensate for the possible
+	 * alignment-caused truncation
+	 */
+	skb_put(skb, 4);
+
+	if (p54_rx(priv->hw, skb) == 0)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+
+static irqreturn_t p54spi_interrupt(int irq, void *config)
+{
+	struct spi_device *spi = config;
+	struct p54s_priv *priv = spi_get_drvdata(spi);
+
+	ieee80211_queue_work(priv->hw, &priv->work);
+
+	return IRQ_HANDLED;
+}
+
+static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
+{
+	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+	int ret = 0;
+
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
+
+	ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
+	if (ret < 0)
+		goto out;
+
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     SPI_HOST_INT_WR_READY)) {
+		dev_err(&priv->spi->dev, "WR_READY timeout\n");
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
+
+	if (FREE_AFTER_TX(skb))
+		p54_free_skb(priv->hw, skb);
+out:
+	p54spi_sleep(priv);
+	return ret;
+}
+
+static int p54spi_wq_tx(struct p54s_priv *priv)
+{
+	struct p54s_tx_info *entry;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *info;
+	struct p54_tx_info *minfo;
+	struct p54s_tx_info *dinfo;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&priv->tx_lock, flags);
+
+	while (!list_empty(&priv->tx_pending)) {
+		entry = list_entry(priv->tx_pending.next,
+				   struct p54s_tx_info, tx_list);
+
+		list_del_init(&entry->tx_list);
+
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+		dinfo = container_of((void *) entry, struct p54s_tx_info,
+				     tx_list);
+		minfo = container_of((void *) dinfo, struct p54_tx_info,
+				     data);
+		info = container_of((void *) minfo, struct ieee80211_tx_info,
+				    rate_driver_data);
+		skb = container_of((void *) info, struct sk_buff, cb);
+
+		ret = p54spi_tx_frame(priv, skb);
+
+		if (ret < 0) {
+			p54_free_skb(priv->hw, skb);
+			return ret;
+		}
+
+		spin_lock_irqsave(&priv->tx_lock, flags);
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return ret;
+}
+
+static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+	struct p54s_priv *priv = dev->priv;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
+	struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+	unsigned long flags;
+
+	BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
+
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	list_add_tail(&di->tx_list, &priv->tx_pending);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+	ieee80211_queue_work(priv->hw, &priv->work);
+}
+
+static void p54spi_work(struct work_struct *work)
+{
+	struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
+	u32 ints;
+	int ret;
+
+	mutex_lock(&priv->mutex);
+
+	if (priv->fw_state == FW_STATE_OFF)
+		goto out;
+
+	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+
+	if (ints & SPI_HOST_INT_READY) {
+		p54spi_int_ready(priv);
+		p54spi_int_ack(priv, SPI_HOST_INT_READY);
+	}
+
+	if (priv->fw_state != FW_STATE_READY)
+		goto out;
+
+	if (ints & SPI_HOST_INT_UPDATE) {
+		p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
+		ret = p54spi_rx(priv);
+		if (ret < 0)
+			goto out;
+	}
+	if (ints & SPI_HOST_INT_SW_UPDATE) {
+		p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
+		ret = p54spi_rx(priv);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = p54spi_wq_tx(priv);
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+static int p54spi_op_start(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	unsigned long timeout;
+	int ret = 0;
+
+	if (mutex_lock_interruptible(&priv->mutex)) {
+		ret = -EINTR;
+		goto out;
+	}
+
+	priv->fw_state = FW_STATE_BOOTING;
+
+	p54spi_power_on(priv);
+
+	ret = p54spi_upload_firmware(dev);
+	if (ret < 0) {
+		p54spi_power_off(priv);
+		goto out_unlock;
+	}
+
+	mutex_unlock(&priv->mutex);
+
+	timeout = msecs_to_jiffies(2000);
+	timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
+							    timeout);
+	if (!timeout) {
+		dev_err(&priv->spi->dev, "firmware boot failed");
+		p54spi_power_off(priv);
+		ret = -1;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&priv->mutex)) {
+		ret = -EINTR;
+		p54spi_power_off(priv);
+		goto out;
+	}
+
+	WARN_ON(priv->fw_state != FW_STATE_READY);
+
+out_unlock:
+	mutex_unlock(&priv->mutex);
+
+out:
+	return ret;
+}
+
+static void p54spi_op_stop(struct ieee80211_hw *dev)
+{
+	struct p54s_priv *priv = dev->priv;
+	unsigned long flags;
+
+	mutex_lock(&priv->mutex);
+	WARN_ON(priv->fw_state != FW_STATE_READY);
+
+	p54spi_power_off(priv);
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	INIT_LIST_HEAD(&priv->tx_pending);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+	priv->fw_state = FW_STATE_OFF;
+	mutex_unlock(&priv->mutex);
+
+	cancel_work_sync(&priv->work);
+}
+
+static int p54spi_probe(struct spi_device *spi)
+{
+	struct p54s_priv *priv = NULL;
+	struct ieee80211_hw *hw;
+	int ret = -EINVAL;
+
+	hw = p54_init_common(sizeof(*priv));
+	if (!hw) {
+		dev_err(&spi->dev, "could not alloc ieee80211_hw");
+		return -ENOMEM;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+	spi_set_drvdata(spi, priv);
+	priv->spi = spi;
+
+	spi->bits_per_word = 16;
+	spi->max_speed_hz = 24000000;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "spi_setup failed");
+		goto err_free;
+	}
+
+	ret = gpio_request(p54spi_gpio_power, "p54spi power");
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+		goto err_free;
+	}
+
+	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
+		goto err_free_gpio_power;
+	}
+
+	gpio_direction_output(p54spi_gpio_power, 0);
+	gpio_direction_input(p54spi_gpio_irq);
+
+	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
+			  p54spi_interrupt, 0, "p54spi",
+			  priv->spi);
+	if (ret < 0) {
+		dev_err(&priv->spi->dev, "request_irq() failed");
+		goto err_free_gpio_irq;
+	}
+
+	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(gpio_to_irq(p54spi_gpio_irq));
+
+	INIT_WORK(&priv->work, p54spi_work);
+	init_completion(&priv->fw_comp);
+	INIT_LIST_HEAD(&priv->tx_pending);
+	mutex_init(&priv->mutex);
+	spin_lock_init(&priv->tx_lock);
+	SET_IEEE80211_DEV(hw, &spi->dev);
+	priv->common.open = p54spi_op_start;
+	priv->common.stop = p54spi_op_stop;
+	priv->common.tx = p54spi_op_tx;
+
+	ret = p54spi_request_firmware(hw);
+	if (ret < 0)
+		goto err_free_common;
+
+	ret = p54spi_request_eeprom(hw);
+	if (ret)
+		goto err_free_common;
+
+	ret = p54_register_common(hw, &priv->spi->dev);
+	if (ret)
+		goto err_free_common;
+
+	return 0;
+
+err_free_common:
+	release_firmware(priv->firmware);
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+	gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+	gpio_free(p54spi_gpio_power);
+err_free:
+	p54_free_common(priv->hw);
+	return ret;
+}
+
+static void p54spi_remove(struct spi_device *spi)
+{
+	struct p54s_priv *priv = spi_get_drvdata(spi);
+
+	p54_unregister_common(priv->hw);
+
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+
+	gpio_free(p54spi_gpio_power);
+	gpio_free(p54spi_gpio_irq);
+	release_firmware(priv->firmware);
+
+	mutex_destroy(&priv->mutex);
+
+	p54_free_common(priv->hw);
+}
+
+
+static struct spi_driver p54spi_driver = {
+	.driver = {
+		.name		= "p54spi",
+	},
+
+	.probe		= p54spi_probe,
+	.remove		= p54spi_remove,
+};
+
+module_spi_driver(p54spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
+MODULE_ALIAS("spi:cx3110x");
+MODULE_ALIAS("spi:p54spi");
+MODULE_ALIAS("spi:stlc45xx");