Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/drivers/net/wireless/marvell/mwifiex/sta_tx.c b/drivers/net/wireless/marvell/mwifiex/sta_tx.c
new file mode 100644
index 000000000..13c0e67ed
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/sta_tx.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP Wireless LAN device driver: station TX data handling
+ *
+ * Copyright 2011-2020 NXP
+ */
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+
+/*
+ * This function fills the TxPD for tx packets.
+ *
+ * The Tx buffer received by this function should already have the
+ * header space allocated for TxPD.
+ *
+ * This function inserts the TxPD in between interface header and actual
+ * data and adjusts the buffer pointers accordingly.
+ *
+ * The following TxPD fields are set by this function, as required -
+ *      - BSS number
+ *      - Tx packet length and offset
+ *      - Priority
+ *      - Packet delay
+ *      - Priority specific Tx control
+ *      - Flags
+ */
+void *mwifiex_process_sta_txpd(struct mwifiex_private *priv,
+				struct sk_buff *skb)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	struct txpd *local_tx_pd;
+	struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
+	unsigned int pad;
+	u16 pkt_type, pkt_offset;
+	int hroom = adapter->intf_hdr_len;
+
+	if (!skb->len) {
+		mwifiex_dbg(adapter, ERROR,
+			    "Tx: bad packet length: %d\n", skb->len);
+		tx_info->status_code = -1;
+		return skb->data;
+	}
+
+	BUG_ON(skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN);
+
+	pkt_type = mwifiex_is_skb_mgmt_frame(skb) ? PKT_TYPE_MGMT : 0;
+
+	pad = ((uintptr_t)skb->data - (sizeof(*local_tx_pd) + hroom)) &
+	       (MWIFIEX_DMA_ALIGN_SZ - 1);
+	skb_push(skb, sizeof(*local_tx_pd) + pad);
+
+	local_tx_pd = (struct txpd *) skb->data;
+	memset(local_tx_pd, 0, sizeof(struct txpd));
+	local_tx_pd->bss_num = priv->bss_num;
+	local_tx_pd->bss_type = priv->bss_type;
+	local_tx_pd->tx_pkt_length = cpu_to_le16((u16)(skb->len -
+						       (sizeof(struct txpd) +
+							pad)));
+
+	local_tx_pd->priority = (u8) skb->priority;
+	local_tx_pd->pkt_delay_2ms =
+				mwifiex_wmm_compute_drv_pkt_delay(priv, skb);
+
+	if (tx_info->flags & MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS ||
+	    tx_info->flags & MWIFIEX_BUF_FLAG_ACTION_TX_STATUS) {
+		local_tx_pd->tx_token_id = tx_info->ack_frame_id;
+		local_tx_pd->flags |= MWIFIEX_TXPD_FLAGS_REQ_TX_STATUS;
+	}
+
+	if (local_tx_pd->priority <
+	    ARRAY_SIZE(priv->wmm.user_pri_pkt_tx_ctrl))
+		/*
+		 * Set the priority specific tx_control field, setting of 0 will
+		 *   cause the default value to be used later in this function
+		 */
+		local_tx_pd->tx_control =
+			cpu_to_le32(priv->wmm.user_pri_pkt_tx_ctrl[local_tx_pd->
+								   priority]);
+
+	if (adapter->pps_uapsd_mode) {
+		if (mwifiex_check_last_packet_indication(priv)) {
+			adapter->tx_lock_flag = true;
+			local_tx_pd->flags =
+				MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET;
+		}
+	}
+
+	if (tx_info->flags & MWIFIEX_BUF_FLAG_TDLS_PKT)
+		local_tx_pd->flags |= MWIFIEX_TXPD_FLAGS_TDLS_PACKET;
+
+	/* Offset of actual data */
+	pkt_offset = sizeof(struct txpd) + pad;
+	if (pkt_type == PKT_TYPE_MGMT) {
+		/* Set the packet type and add header for management frame */
+		local_tx_pd->tx_pkt_type = cpu_to_le16(pkt_type);
+		pkt_offset += MWIFIEX_MGMT_FRAME_HEADER_SIZE;
+	}
+
+	local_tx_pd->tx_pkt_offset = cpu_to_le16(pkt_offset);
+
+	/* make space for adapter->intf_hdr_len */
+	skb_push(skb, hroom);
+
+	if (!local_tx_pd->tx_control)
+		/* TxCtrl set by user or default */
+		local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
+
+	return skb->data;
+}
+
+/*
+ * This function tells firmware to send a NULL data packet.
+ *
+ * The function creates a NULL data packet with TxPD and sends to the
+ * firmware for transmission, with highest priority setting.
+ */
+int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	struct txpd *local_tx_pd;
+	struct mwifiex_tx_param tx_param;
+/* sizeof(struct txpd) + Interface specific header */
+#define NULL_PACKET_HDR 64
+	u32 data_len = NULL_PACKET_HDR;
+	struct sk_buff *skb;
+	int ret;
+	struct mwifiex_txinfo *tx_info = NULL;
+
+	if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags))
+		return -1;
+
+	if (!priv->media_connected)
+		return -1;
+
+	if (adapter->data_sent)
+		return -1;
+
+	if (adapter->if_ops.is_port_ready &&
+	    !adapter->if_ops.is_port_ready(priv))
+		return -1;
+
+	skb = dev_alloc_skb(data_len);
+	if (!skb)
+		return -1;
+
+	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
+	tx_info->bss_num = priv->bss_num;
+	tx_info->bss_type = priv->bss_type;
+	tx_info->pkt_len = data_len -
+			(sizeof(struct txpd) + adapter->intf_hdr_len);
+	skb_reserve(skb, sizeof(struct txpd) + adapter->intf_hdr_len);
+	skb_push(skb, sizeof(struct txpd));
+
+	local_tx_pd = (struct txpd *) skb->data;
+	local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
+	local_tx_pd->flags = flags;
+	local_tx_pd->priority = WMM_HIGHEST_PRIORITY;
+	local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd));
+	local_tx_pd->bss_num = priv->bss_num;
+	local_tx_pd->bss_type = priv->bss_type;
+
+	skb_push(skb, adapter->intf_hdr_len);
+	if (adapter->iface_type == MWIFIEX_USB) {
+		ret = adapter->if_ops.host_to_card(adapter, priv->usb_port,
+						   skb, NULL);
+	} else {
+		tx_param.next_pkt_len = 0;
+		ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA,
+						   skb, &tx_param);
+	}
+	switch (ret) {
+	case -EBUSY:
+		dev_kfree_skb_any(skb);
+		mwifiex_dbg(adapter, ERROR,
+			    "%s: host_to_card failed: ret=%d\n",
+			    __func__, ret);
+		adapter->dbg.num_tx_host_to_card_failure++;
+		break;
+	case -1:
+		dev_kfree_skb_any(skb);
+		mwifiex_dbg(adapter, ERROR,
+			    "%s: host_to_card failed: ret=%d\n",
+			    __func__, ret);
+		adapter->dbg.num_tx_host_to_card_failure++;
+		break;
+	case 0:
+		dev_kfree_skb_any(skb);
+		mwifiex_dbg(adapter, DATA,
+			    "data: %s: host_to_card succeeded\n",
+			    __func__);
+		adapter->tx_lock_flag = true;
+		break;
+	case -EINPROGRESS:
+		adapter->tx_lock_flag = true;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * This function checks if we need to send last packet indication.
+ */
+u8
+mwifiex_check_last_packet_indication(struct mwifiex_private *priv)
+{
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u8 ret = false;
+
+	if (!adapter->sleep_period.period)
+		return ret;
+	if (mwifiex_wmm_lists_empty(adapter))
+			ret = true;
+
+	if (ret && !adapter->cmd_sent && !adapter->curr_cmd &&
+	    !is_command_pending(adapter)) {
+		adapter->delay_null_pkt = false;
+		ret = true;
+	} else {
+		ret = false;
+		adapter->delay_null_pkt = true;
+	}
+	return ret;
+}