Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
new file mode 100644
index 000000000..b09cdc59b
--- /dev/null
+++ b/drivers/pci/controller/Kconfig
@@ -0,0 +1,347 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "PCI controller drivers"
+	depends on PCI
+
+config PCI_MVEBU
+	tristate "Marvell EBU PCIe controller"
+	depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST
+	depends on MVEBU_MBUS
+	depends on ARM
+	depends on OF
+	select PCI_BRIDGE_EMUL
+	help
+	 Add support for Marvell EBU PCIe controller. This PCIe controller
+	 is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370,
+	 Armada XP, Armada 375, Armada 38x and Armada 39x.
+
+config PCI_AARDVARK
+	tristate "Aardvark PCIe controller"
+	depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	select PCI_BRIDGE_EMUL
+	help
+	 Add support for Aardvark 64bit PCIe Host Controller. This
+	 controller is part of the South Bridge of the Marvel Armada
+	 3700 SoC.
+
+config PCIE_XILINX_NWL
+	bool "NWL PCIe Core"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	 Say 'Y' here if you want kernel support for Xilinx
+	 NWL PCIe controller. The controller can act as Root Port
+	 or End Point. The current option selection will only
+	 support root port enabling.
+
+config PCI_FTPCI100
+	bool "Faraday Technology FTPCI100 PCI controller"
+	depends on OF
+	default ARCH_GEMINI
+
+config PCI_IXP4XX
+	bool "Intel IXP4xx PCI controller"
+	depends on ARM && OF
+	depends on ARCH_IXP4XX || COMPILE_TEST
+	default ARCH_IXP4XX
+	help
+	  Say Y here if you want support for the PCI host controller found
+	  in the Intel IXP4xx XScale-based network processor SoC.
+
+config PCI_TEGRA
+	bool "NVIDIA Tegra PCIe controller"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Say Y here if you want support for the PCIe host controller found
+	  on NVIDIA Tegra SoCs.
+
+config PCI_RCAR_GEN2
+	bool "Renesas R-Car Gen2 Internal PCI controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on ARM
+	help
+	  Say Y here if you want internal PCI support on R-Car Gen2 SoC.
+	  There are 3 internal PCI controllers available with a single
+	  built-in EHCI/OHCI host controller present on each one.
+
+config PCIE_RCAR_HOST
+	bool "Renesas R-Car PCIe host controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Say Y here if you want PCIe controller support on R-Car SoCs in host
+	  mode.
+
+config PCIE_RCAR_EP
+	bool "Renesas R-Car PCIe endpoint controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	help
+	  Say Y here if you want PCIe controller support on R-Car SoCs in
+	  endpoint mode.
+
+config PCI_HOST_COMMON
+	tristate
+	select PCI_ECAM
+
+config PCI_HOST_GENERIC
+	tristate "Generic PCI host controller"
+	depends on OF
+	select PCI_HOST_COMMON
+	select IRQ_DOMAIN
+	help
+	  Say Y here if you want to support a simple generic PCI host
+	  controller, such as the one emulated by kvmtool.
+
+config PCIE_XILINX
+	bool "Xilinx AXI PCIe host bridge support"
+	depends on OF || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+	  Host Bridge driver.
+
+config PCIE_XILINX_CPM
+	bool "Xilinx Versal CPM host bridge support"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	select PCI_HOST_COMMON
+	help
+	  Say 'Y' here if you want kernel support for the
+	  Xilinx Versal CPM host bridge.
+
+config PCI_XGENE
+	bool "X-Gene PCIe controller"
+	depends on ARM64 || COMPILE_TEST
+	depends on OF || (ACPI && PCI_QUIRKS)
+	help
+	  Say Y here if you want internal PCI support on APM X-Gene SoC.
+	  There are 5 internal PCIe ports available. Each port is GEN3 capable
+	  and have varied lanes from x1 to x8.
+
+config PCI_XGENE_MSI
+	bool "X-Gene v1 PCIe MSI feature"
+	depends on PCI_XGENE
+	depends on PCI_MSI
+	default y
+	help
+	  Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
+	  This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
+
+config PCI_V3_SEMI
+	bool "V3 Semiconductor PCI controller"
+	depends on OF
+	depends on ARM || COMPILE_TEST
+	default ARCH_INTEGRATOR_AP
+
+config PCI_VERSATILE
+	bool "ARM Versatile PB PCI controller"
+	depends on ARCH_VERSATILE || COMPILE_TEST
+
+config PCIE_IPROC
+	tristate
+	help
+	  This enables the iProc PCIe core controller support for Broadcom's
+	  iProc family of SoCs. An appropriate bus interface driver needs
+	  to be enabled to select this.
+
+config PCIE_IPROC_PLATFORM
+	tristate "Broadcom iProc PCIe platform bus driver"
+	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+	depends on OF
+	select PCIE_IPROC
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to use the Broadcom iProc PCIe controller
+	  through the generic platform bus interface
+
+config PCIE_IPROC_BCMA
+	tristate "Broadcom iProc PCIe BCMA bus driver"
+	depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select PCIE_IPROC
+	select BCMA
+	default ARCH_BCM_5301X
+	help
+	  Say Y here if you want to use the Broadcom iProc PCIe controller
+	  through the BCMA bus interface
+
+config PCIE_IPROC_MSI
+	bool "Broadcom iProc PCIe MSI support"
+	depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
+	depends on PCI_MSI
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to enable MSI support for Broadcom's iProc
+	  PCIe controller
+
+config PCIE_ALTERA
+	tristate "Altera PCIe controller"
+	depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
+	help
+	  Say Y here if you want to enable PCIe controller support on Altera
+	  FPGA.
+
+config PCIE_ALTERA_MSI
+	tristate "Altera PCIe MSI feature"
+	depends on PCIE_ALTERA
+	depends on PCI_MSI
+	help
+	  Say Y here if you want PCIe MSI support for the Altera FPGA.
+	  This MSI driver supports Altera MSI to GIC controller IP.
+
+config PCI_HOST_THUNDER_PEM
+	bool "Cavium Thunder PCIe controller to off-chip devices"
+	depends on ARM64 || COMPILE_TEST
+	depends on OF || (ACPI && PCI_QUIRKS)
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
+
+config PCI_HOST_THUNDER_ECAM
+	bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
+	depends on ARM64 || COMPILE_TEST
+	depends on OF || (ACPI && PCI_QUIRKS)
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
+
+config PCIE_ROCKCHIP
+	bool
+	depends on PCI
+
+config PCIE_ROCKCHIP_HOST
+	tristate "Rockchip PCIe host controller"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	select MFD_SYSCON
+	select PCIE_ROCKCHIP
+	help
+	  Say Y here if you want internal PCI support on Rockchip SoC.
+	  There is 1 internal PCIe port available to support GEN2 with
+	  4 slots.
+
+config PCIE_ROCKCHIP_EP
+	bool "Rockchip PCIe endpoint controller"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	depends on PCI_ENDPOINT
+	select MFD_SYSCON
+	select PCIE_ROCKCHIP
+	help
+	  Say Y here if you want to support Rockchip PCIe controller in
+	  endpoint mode on Rockchip SoC. There is 1 internal PCIe port
+	  available to support GEN2 with 4 slots.
+
+config PCIE_MEDIATEK
+	tristate "MediaTek PCIe controller"
+	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  MediaTek SoCs.
+
+config PCIE_MEDIATEK_GEN3
+	tristate "MediaTek Gen3 PCIe controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
+	  This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
+	  and support up to 256 MSI interrupt numbers for
+	  multi-function devices.
+
+	  Say Y here if you want to enable Gen3 PCIe controller support on
+	  MediaTek SoCs.
+
+config VMD
+	depends on PCI_MSI && X86_64 && !UML
+	tristate "Intel Volume Management Device Driver"
+	help
+	  Adds support for the Intel Volume Management Device (VMD). VMD is a
+	  secondary PCI host bridge that allows PCI Express root ports,
+	  and devices attached to them, to be removed from the default
+	  PCI domain and placed within the VMD domain. This provides
+	  more bus resources than are otherwise possible with a
+	  single domain. If you know your system provides one of these and
+	  has devices attached to it, say Y; if you are not sure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmd.
+
+config PCIE_BRCMSTB
+	tristate "Broadcom Brcmstb PCIe host controller"
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
+		   BMIPS_GENERIC || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	default ARCH_BRCMSTB || BMIPS_GENERIC
+	help
+	  Say Y here to enable PCIe host controller support for
+	  Broadcom STB based SoCs, like the Raspberry Pi 4.
+
+config PCI_HYPERV_INTERFACE
+	tristate "Hyper-V PCI Interface"
+	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && PCI_MSI
+	help
+	  The Hyper-V PCI Interface is a helper driver allows other drivers to
+	  have a common interface with the Hyper-V PCI frontend driver.
+
+config PCI_LOONGSON
+	bool "LOONGSON PCI Controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	depends on OF || ACPI
+	depends on PCI_QUIRKS
+	default MACH_LOONGSON64
+	help
+	  Say Y here if you want to enable PCI controller support on
+	  Loongson systems.
+
+config PCIE_MICROCHIP_HOST
+	bool "Microchip AXI PCIe host bridge support"
+	depends on PCI_MSI && OF
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want kernel to support the Microchip AXI PCIe
+	  Host Bridge driver.
+
+config PCIE_HISI_ERR
+	depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST)
+	bool "HiSilicon HIP PCIe controller error handling driver"
+	help
+	  Say Y here if you want error handling support
+	  for the PCIe controller's errors on HiSilicon HIP SoCs
+
+config PCIE_APPLE_MSI_DOORBELL_ADDR
+	hex
+	default 0xfffff000
+	depends on PCIE_APPLE
+
+config PCIE_APPLE
+	tristate "Apple PCIe controller"
+	depends on ARCH_APPLE || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want to enable PCIe controller support on Apple
+	  system-on-chips, like the Apple M1. This is required for the USB
+	  type-A ports, Ethernet, Wi-Fi, and Bluetooth.
+
+	  If unsure, say Y if you have an Apple Silicon system.
+
+config PCIE_MT7621
+	tristate "MediaTek MT7621 PCIe Controller"
+	depends on SOC_MT7621 || COMPILE_TEST
+	select PHY_MT7621_PCI
+	default SOC_MT7621
+	help
+	  This selects a driver for the MediaTek MT7621 PCIe Controller.
+
+source "drivers/pci/controller/dwc/Kconfig"
+source "drivers/pci/controller/mobiveil/Kconfig"
+source "drivers/pci/controller/cadence/Kconfig"
+endmenu