Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 516 insertions, 0 deletions

diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
new file mode 100644
index 000000000..cfca3a82d
--- /dev/null
+++ b/drivers/power/supply/bq24735-charger.c
@@ -0,0 +1,516 @@
+/*
+ * Battery charger driver for TI BQ24735
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/bq24735-charger.h>
+
+/* BQ24735 available commands and their respective masks */
+#define BQ24735_CHARGE_OPT		0x12
+#define BQ24735_CHARGE_CURRENT		0x14
+#define BQ24735_CHARGE_CURRENT_MASK	0x1fc0
+#define BQ24735_CHARGE_VOLTAGE		0x15
+#define BQ24735_CHARGE_VOLTAGE_MASK	0x7ff0
+#define BQ24735_INPUT_CURRENT		0x3f
+#define BQ24735_INPUT_CURRENT_MASK	0x1f80
+#define BQ24735_MANUFACTURER_ID		0xfe
+#define BQ24735_DEVICE_ID		0xff
+
+/* ChargeOptions bits of interest */
+#define BQ24735_CHARGE_OPT_CHG_DISABLE	(1 << 0)
+#define BQ24735_CHARGE_OPT_AC_PRESENT	(1 << 4)
+
+struct bq24735 {
+	struct power_supply		*charger;
+	struct power_supply_desc	charger_desc;
+	struct i2c_client		*client;
+	struct bq24735_platform		*pdata;
+	struct mutex			lock;
+	struct gpio_desc		*status_gpio;
+	struct delayed_work		poll;
+	u32				poll_interval;
+	bool				charging;
+};
+
+static inline struct bq24735 *to_bq24735(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static enum power_supply_property bq24735_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int bq24735_charger_property_is_writeable(struct power_supply *psy,
+						 enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static inline int bq24735_write_word(struct i2c_client *client, u8 reg,
+				     u16 value)
+{
+	return i2c_smbus_write_word_data(client, reg, value);
+}
+
+static inline int bq24735_read_word(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_word_data(client, reg);
+}
+
+static int bq24735_update_word(struct i2c_client *client, u8 reg,
+			       u16 mask, u16 value)
+{
+	unsigned int tmp;
+	int ret;
+
+	ret = bq24735_read_word(client, reg);
+	if (ret < 0)
+		return ret;
+
+	tmp = ret & ~mask;
+	tmp |= value & mask;
+
+	return bq24735_write_word(client, reg, tmp);
+}
+
+static int bq24735_config_charger(struct bq24735 *charger)
+{
+	struct bq24735_platform *pdata = charger->pdata;
+	int ret;
+	u16 value;
+
+	if (pdata->ext_control)
+		return 0;
+
+	if (pdata->charge_current) {
+		value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_CHARGE_CURRENT, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write charger current : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (pdata->charge_voltage) {
+		value = pdata->charge_voltage & BQ24735_CHARGE_VOLTAGE_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_CHARGE_VOLTAGE, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write charger voltage : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (pdata->input_current) {
+		value = pdata->input_current & BQ24735_INPUT_CURRENT_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_INPUT_CURRENT, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write input current : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+	int ret;
+
+	if (charger->pdata->ext_control)
+		return 0;
+
+	ret = bq24735_config_charger(charger);
+	if (ret)
+		return ret;
+
+	return bq24735_update_word(charger->client, BQ24735_CHARGE_OPT,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE, 0);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+	if (charger->pdata->ext_control)
+		return 0;
+
+	return bq24735_update_word(charger->client, BQ24735_CHARGE_OPT,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE);
+}
+
+static bool bq24735_charger_is_present(struct bq24735 *charger)
+{
+	if (charger->status_gpio) {
+		return !gpiod_get_value_cansleep(charger->status_gpio);
+	} else {
+		int ac = 0;
+
+		ac = bq24735_read_word(charger->client, BQ24735_CHARGE_OPT);
+		if (ac < 0) {
+			dev_dbg(&charger->client->dev,
+				"Failed to read charger options : %d\n",
+				ac);
+			return false;
+		}
+		return (ac & BQ24735_CHARGE_OPT_AC_PRESENT) ? true : false;
+	}
+
+	return false;
+}
+
+static int bq24735_charger_is_charging(struct bq24735 *charger)
+{
+	int ret;
+
+	if (!bq24735_charger_is_present(charger))
+		return 0;
+
+	ret  = bq24735_read_word(charger->client, BQ24735_CHARGE_OPT);
+	if (ret < 0)
+		return ret;
+
+	return !(ret & BQ24735_CHARGE_OPT_CHG_DISABLE);
+}
+
+static void bq24735_update(struct bq24735 *charger)
+{
+	mutex_lock(&charger->lock);
+
+	if (charger->charging && bq24735_charger_is_present(charger))
+		bq24735_enable_charging(charger);
+	else
+		bq24735_disable_charging(charger);
+
+	mutex_unlock(&charger->lock);
+
+	power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+	struct power_supply *psy = devid;
+	struct bq24735 *charger = to_bq24735(psy);
+
+	bq24735_update(charger);
+
+	return IRQ_HANDLED;
+}
+
+static void bq24735_poll(struct work_struct *work)
+{
+	struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+	bq24735_update(charger);
+
+	schedule_delayed_work(&charger->poll,
+			      msecs_to_jiffies(charger->poll_interval));
+}
+
+static int bq24735_charger_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct bq24735 *charger = to_bq24735(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = bq24735_charger_is_present(charger) ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (bq24735_charger_is_charging(charger)) {
+		case 1:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq24735_charger_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct bq24735 *charger = to_bq24735(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = true;
+			ret = bq24735_enable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			break;
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = false;
+			ret = bq24735_disable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			break;
+		default:
+			return -EINVAL;
+		}
+		power_supply_changed(psy);
+		break;
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
+{
+	struct bq24735_platform *pdata;
+	struct device_node *np = client->dev.of_node;
+	u32 val;
+	int ret;
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&client->dev,
+			"Memory alloc for bq24735 pdata failed\n");
+		return NULL;
+	}
+
+	ret = of_property_read_u32(np, "ti,charge-current", &val);
+	if (!ret)
+		pdata->charge_current = val;
+
+	ret = of_property_read_u32(np, "ti,charge-voltage", &val);
+	if (!ret)
+		pdata->charge_voltage = val;
+
+	ret = of_property_read_u32(np, "ti,input-current", &val);
+	if (!ret)
+		pdata->input_current = val;
+
+	pdata->ext_control = of_property_read_bool(np, "ti,external-control");
+
+	return pdata;
+}
+
+static int bq24735_charger_probe(struct i2c_client *client)
+{
+	int ret;
+	struct bq24735 *charger;
+	struct power_supply_desc *supply_desc;
+	struct power_supply_config psy_cfg = {};
+	char *name;
+
+	charger = devm_kzalloc(&client->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	mutex_init(&charger->lock);
+	charger->charging = true;
+	charger->pdata = client->dev.platform_data;
+
+	if (IS_ENABLED(CONFIG_OF) && !charger->pdata && client->dev.of_node)
+		charger->pdata = bq24735_parse_dt_data(client);
+
+	if (!charger->pdata) {
+		dev_err(&client->dev, "no platform data provided\n");
+		return -EINVAL;
+	}
+
+	name = (char *)charger->pdata->name;
+	if (!name) {
+		name = devm_kasprintf(&client->dev, GFP_KERNEL,
+				      "bq24735@%s",
+				      dev_name(&client->dev));
+		if (!name) {
+			dev_err(&client->dev, "Failed to alloc device name\n");
+			return -ENOMEM;
+		}
+	}
+
+	charger->client = client;
+
+	supply_desc = &charger->charger_desc;
+
+	supply_desc->name = name;
+	supply_desc->type = POWER_SUPPLY_TYPE_MAINS;
+	supply_desc->properties = bq24735_charger_properties;
+	supply_desc->num_properties = ARRAY_SIZE(bq24735_charger_properties);
+	supply_desc->get_property = bq24735_charger_get_property;
+	supply_desc->set_property = bq24735_charger_set_property;
+	supply_desc->property_is_writeable =
+				bq24735_charger_property_is_writeable;
+
+	psy_cfg.supplied_to = charger->pdata->supplied_to;
+	psy_cfg.num_supplicants = charger->pdata->num_supplicants;
+	psy_cfg.of_node = client->dev.of_node;
+	psy_cfg.drv_data = charger;
+
+	i2c_set_clientdata(client, charger);
+
+	charger->status_gpio = devm_gpiod_get_optional(&client->dev,
+						       "ti,ac-detect",
+						       GPIOD_IN);
+	if (IS_ERR(charger->status_gpio)) {
+		ret = PTR_ERR(charger->status_gpio);
+		dev_err(&client->dev, "Getting gpio failed: %d\n", ret);
+		return ret;
+	}
+
+	if (bq24735_charger_is_present(charger)) {
+		ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
+				ret);
+			return ret;
+		} else if (ret != 0x0040) {
+			dev_err(&client->dev,
+				"manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
+			return -ENODEV;
+		}
+
+		ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read device id : %d\n", ret);
+			return ret;
+		} else if (ret != 0x000B) {
+			dev_err(&client->dev,
+				"device id mismatch. 0x000b != 0x%04x\n", ret);
+			return -ENODEV;
+		}
+
+		ret = bq24735_enable_charging(charger);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to enable charging\n");
+			return ret;
+		}
+	}
+
+	charger->charger = devm_power_supply_register(&client->dev, supply_desc,
+						      &psy_cfg);
+	if (IS_ERR(charger->charger)) {
+		ret = PTR_ERR(charger->charger);
+		dev_err(&client->dev, "Failed to register power supply: %d\n",
+			ret);
+		return ret;
+	}
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, bq24735_charger_isr,
+						IRQF_TRIGGER_RISING |
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						supply_desc->name,
+						charger->charger);
+		if (ret) {
+			dev_err(&client->dev,
+				"Unable to register IRQ %d err %d\n",
+				client->irq, ret);
+			return ret;
+		}
+	} else {
+		ret = device_property_read_u32(&client->dev, "poll-interval",
+					       &charger->poll_interval);
+		if (ret)
+			return 0;
+		if (!charger->poll_interval)
+			return 0;
+
+		ret = devm_delayed_work_autocancel(&client->dev, &charger->poll,
+						   bq24735_poll);
+		if (ret)
+			return ret;
+
+		schedule_delayed_work(&charger->poll,
+				      msecs_to_jiffies(charger->poll_interval));
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bq24735_charger_id[] = {
+	{ "bq24735-charger", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, bq24735_charger_id);
+
+static const struct of_device_id bq24735_match_ids[] = {
+	{ .compatible = "ti,bq24735", },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, bq24735_match_ids);
+
+static struct i2c_driver bq24735_charger_driver = {
+	.driver = {
+		.name = "bq24735-charger",
+		.of_match_table = bq24735_match_ids,
+	},
+	.probe_new = bq24735_charger_probe,
+	.id_table = bq24735_charger_id,
+};
+
+module_i2c_driver(bq24735_charger_driver);
+
+MODULE_DESCRIPTION("bq24735 battery charging driver");
+MODULE_AUTHOR("Darbha Sriharsha <dsriharsha@nvidia.com>");
+MODULE_LICENSE("GPL v2");