Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 676 insertions, 0 deletions

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
new file mode 100644
index 000000000..529963a7e
--- /dev/null
+++ b/drivers/regulator/fan53555.c
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
+//
+// Supported Part Numbers:
+// FAN53555UC00X/01X/03X/04X/05X
+//
+// Copyright (c) 2012 Marvell Technology Ltd.
+// Yunfan Zhang <yfzhang@marvell.com>
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/of_device.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/regulator/fan53555.h>
+
+/* Voltage setting */
+#define FAN53555_VSEL0		0x00
+#define FAN53555_VSEL1		0x01
+
+#define TCS4525_VSEL0		0x11
+#define TCS4525_VSEL1		0x10
+#define TCS4525_TIME		0x13
+#define TCS4525_COMMAND		0x14
+
+/* Control register */
+#define FAN53555_CONTROL	0x02
+/* IC Type */
+#define FAN53555_ID1		0x03
+/* IC mask version */
+#define FAN53555_ID2		0x04
+/* Monitor register */
+#define FAN53555_MONITOR	0x05
+
+/* VSEL bit definitions */
+#define VSEL_BUCK_EN	(1 << 7)
+#define VSEL_MODE		(1 << 6)
+/* Chip ID and Verison */
+#define DIE_ID		0x0F	/* ID1 */
+#define DIE_REV		0x0F	/* ID2 */
+/* Control bit definitions */
+#define CTL_OUTPUT_DISCHG	(1 << 7)
+#define CTL_SLEW_MASK		(0x7 << 4)
+#define CTL_SLEW_SHIFT		4
+#define CTL_RESET			(1 << 2)
+#define CTL_MODE_VSEL0_MODE	BIT(0)
+#define CTL_MODE_VSEL1_MODE	BIT(1)
+
+#define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
+#define FAN53526_NVOLTAGES	128
+
+#define TCS_VSEL0_MODE		(1 << 7)
+#define TCS_VSEL1_MODE		(1 << 6)
+
+#define TCS_SLEW_SHIFT		3
+#define TCS_SLEW_MASK		(0x3 < 3)
+
+enum fan53555_vendor {
+	FAN53526_VENDOR_FAIRCHILD = 0,
+	FAN53555_VENDOR_FAIRCHILD,
+	FAN53555_VENDOR_SILERGY,
+	FAN53526_VENDOR_TCS,
+};
+
+enum {
+	FAN53526_CHIP_ID_01 = 1,
+};
+
+enum {
+	FAN53526_CHIP_REV_08 = 8,
+};
+
+/* IC Type */
+enum {
+	FAN53555_CHIP_ID_00 = 0,
+	FAN53555_CHIP_ID_01,
+	FAN53555_CHIP_ID_02,
+	FAN53555_CHIP_ID_03,
+	FAN53555_CHIP_ID_04,
+	FAN53555_CHIP_ID_05,
+	FAN53555_CHIP_ID_08 = 8,
+};
+
+enum {
+	TCS4525_CHIP_ID_12 = 12,
+};
+
+enum {
+	TCS4526_CHIP_ID_00 = 0,
+};
+
+/* IC mask revision */
+enum {
+	FAN53555_CHIP_REV_00 = 0x3,
+	FAN53555_CHIP_REV_13 = 0xf,
+};
+
+enum {
+	SILERGY_SYR82X = 8,
+	SILERGY_SYR83X = 9,
+};
+
+struct fan53555_device_info {
+	enum fan53555_vendor vendor;
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_init_data *regulator;
+	/* IC Type and Rev */
+	int chip_id;
+	int chip_rev;
+	/* Voltage setting register */
+	unsigned int vol_reg;
+	unsigned int sleep_reg;
+	/* Voltage range and step(linear) */
+	unsigned int vsel_min;
+	unsigned int vsel_step;
+	unsigned int vsel_count;
+	/* Mode */
+	unsigned int mode_reg;
+	unsigned int mode_mask;
+	/* Sleep voltage cache */
+	unsigned int sleep_vol_cache;
+	/* Slew rate */
+	unsigned int slew_reg;
+	unsigned int slew_mask;
+	const unsigned int *ramp_delay_table;
+	unsigned int n_ramp_values;
+	unsigned int slew_rate;
+};
+
+static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (di->sleep_vol_cache == uV)
+		return 0;
+	ret = regulator_map_voltage_linear(rdev, uV, uV);
+	if (ret < 0)
+		return ret;
+	ret = regmap_update_bits(rdev->regmap, di->sleep_reg,
+				 di->desc.vsel_mask, ret);
+	if (ret < 0)
+		return ret;
+	/* Cache the sleep voltage setting.
+	 * Might not be the real voltage which is rounded */
+	di->sleep_vol_cache = uV;
+
+	return 0;
+}
+
+static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+	return regmap_update_bits(rdev->regmap, di->sleep_reg,
+				  VSEL_BUCK_EN, VSEL_BUCK_EN);
+}
+
+static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+	return regmap_update_bits(rdev->regmap, di->sleep_reg,
+				  VSEL_BUCK_EN, 0);
+}
+
+static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(rdev->regmap, di->mode_reg,
+				   di->mode_mask, di->mode_mask);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
+{
+	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret = 0;
+
+	ret = regmap_read(rdev->regmap, di->mode_reg, &val);
+	if (ret < 0)
+		return ret;
+	if (val & di->mode_mask)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static const unsigned int slew_rates[] = {
+	64000,
+	32000,
+	16000,
+	 8000,
+	 4000,
+	 2000,
+	 1000,
+	  500,
+};
+
+static const unsigned int tcs_slew_rates[] = {
+	18700,
+	 9300,
+	 4600,
+	 2300,
+};
+
+static const struct regulator_ops fan53555_regulator_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_suspend_voltage = fan53555_set_suspend_voltage,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = fan53555_set_mode,
+	.get_mode = fan53555_get_mode,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
+	.set_suspend_enable = fan53555_set_suspend_enable,
+	.set_suspend_disable = fan53555_set_suspend_disable,
+};
+
+static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case FAN53526_CHIP_ID_01:
+		switch (di->chip_rev) {
+		case FAN53526_CHIP_REV_08:
+			di->vsel_min = 600000;
+			di->vsel_step = 6250;
+			break;
+		default:
+			dev_err(di->dev,
+				"Chip ID %d with rev %d not supported!\n",
+				di->chip_id, di->chip_rev);
+			return -EINVAL;
+		}
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
+	di->vsel_count = FAN53526_NVOLTAGES;
+
+	return 0;
+}
+
+static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case FAN53555_CHIP_ID_00:
+		switch (di->chip_rev) {
+		case FAN53555_CHIP_REV_00:
+			di->vsel_min = 600000;
+			di->vsel_step = 10000;
+			break;
+		case FAN53555_CHIP_REV_13:
+			di->vsel_min = 800000;
+			di->vsel_step = 10000;
+			break;
+		default:
+			dev_err(di->dev,
+				"Chip ID %d with rev %d not supported!\n",
+				di->chip_id, di->chip_rev);
+			return -EINVAL;
+		}
+		break;
+	case FAN53555_CHIP_ID_01:
+	case FAN53555_CHIP_ID_03:
+	case FAN53555_CHIP_ID_05:
+	case FAN53555_CHIP_ID_08:
+		di->vsel_min = 600000;
+		di->vsel_step = 10000;
+		break;
+	case FAN53555_CHIP_ID_04:
+		di->vsel_min = 603000;
+		di->vsel_step = 12826;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
+	di->vsel_count = FAN53555_NVOLTAGES;
+
+	return 0;
+}
+
+static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
+{
+	/* Init voltage range and step */
+	switch (di->chip_id) {
+	case SILERGY_SYR82X:
+	case SILERGY_SYR83X:
+		di->vsel_min = 712500;
+		di->vsel_step = 12500;
+		break;
+	default:
+		dev_err(di->dev,
+			"Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
+	di->vsel_count = FAN53555_NVOLTAGES;
+
+	return 0;
+}
+
+static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
+{
+	switch (di->chip_id) {
+	case TCS4525_CHIP_ID_12:
+	case TCS4526_CHIP_ID_00:
+		di->slew_reg = TCS4525_TIME;
+		di->slew_mask = TCS_SLEW_MASK;
+		di->ramp_delay_table = tcs_slew_rates;
+		di->n_ramp_values = ARRAY_SIZE(tcs_slew_rates);
+
+		/* Init voltage range and step */
+		di->vsel_min = 600000;
+		di->vsel_step = 6250;
+		di->vsel_count = FAN53526_NVOLTAGES;
+		break;
+	default:
+		dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* For 00,01,03,05 options:
+ * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
+ * For 04 option:
+ * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
+ * */
+static int fan53555_device_setup(struct fan53555_device_info *di,
+				struct fan53555_platform_data *pdata)
+{
+	int ret = 0;
+
+	/* Setup voltage control register */
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = FAN53555_VSEL0;
+			di->vol_reg = FAN53555_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = FAN53555_VSEL1;
+			di->vol_reg = FAN53555_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
+		break;
+	case FAN53526_VENDOR_TCS:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = TCS4525_VSEL0;
+			di->vol_reg = TCS4525_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = TCS4525_VSEL1;
+			di->vol_reg = TCS4525_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
+		return -EINVAL;
+	}
+
+	/* Setup mode control register */
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+		di->mode_reg = FAN53555_CONTROL;
+
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->mode_mask = CTL_MODE_VSEL1_MODE;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->mode_mask = CTL_MODE_VSEL0_MODE;
+			break;
+		}
+		break;
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		di->mode_reg = di->vol_reg;
+		di->mode_mask = VSEL_MODE;
+		break;
+	case FAN53526_VENDOR_TCS:
+		di->mode_reg = TCS4525_COMMAND;
+
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->mode_mask = TCS_VSEL1_MODE;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->mode_mask = TCS_VSEL0_MODE;
+			break;
+		}
+		break;
+	default:
+		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
+		return -EINVAL;
+	}
+
+	/* Setup voltage range */
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+		ret = fan53526_voltages_setup_fairchild(di);
+		break;
+	case FAN53555_VENDOR_FAIRCHILD:
+		ret = fan53555_voltages_setup_fairchild(di);
+		break;
+	case FAN53555_VENDOR_SILERGY:
+		ret = fan53555_voltages_setup_silergy(di);
+		break;
+	case FAN53526_VENDOR_TCS:
+		ret = fan53526_voltages_setup_tcs(di);
+		break;
+	default:
+		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int fan53555_regulator_register(struct fan53555_device_info *di,
+			struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+	struct regulator_dev *rdev;
+
+	rdesc->name = "fan53555-reg";
+	rdesc->supply_name = "vin";
+	rdesc->ops = &fan53555_regulator_ops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = di->vsel_count;
+	rdesc->enable_reg = di->vol_reg;
+	rdesc->enable_mask = VSEL_BUCK_EN;
+	rdesc->min_uV = di->vsel_min;
+	rdesc->uV_step = di->vsel_step;
+	rdesc->vsel_reg = di->vol_reg;
+	rdesc->vsel_mask = di->vsel_count - 1;
+	rdesc->ramp_reg = di->slew_reg;
+	rdesc->ramp_mask = di->slew_mask;
+	rdesc->ramp_delay_table = di->ramp_delay_table;
+	rdesc->n_ramp_values = di->n_ramp_values;
+	rdesc->owner = THIS_MODULE;
+
+	rdev = devm_regulator_register(di->dev, &di->desc, config);
+	return PTR_ERR_OR_ZERO(rdev);
+}
+
+static const struct regmap_config fan53555_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
+					      struct device_node *np,
+					      const struct regulator_desc *desc)
+{
+	struct fan53555_platform_data *pdata;
+	int ret;
+	u32 tmp;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->regulator = of_get_regulator_init_data(dev, np, desc);
+
+	ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
+				   &tmp);
+	if (!ret)
+		pdata->sleep_vsel_id = tmp;
+
+	return pdata;
+}
+
+static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
+	{
+		.compatible = "fcs,fan53526",
+		.data = (void *)FAN53526_VENDOR_FAIRCHILD,
+	}, {
+		.compatible = "fcs,fan53555",
+		.data = (void *)FAN53555_VENDOR_FAIRCHILD
+	}, {
+		.compatible = "silergy,syr827",
+		.data = (void *)FAN53555_VENDOR_SILERGY,
+	}, {
+		.compatible = "silergy,syr828",
+		.data = (void *)FAN53555_VENDOR_SILERGY,
+	}, {
+		.compatible = "tcs,tcs4525",
+		.data = (void *)FAN53526_VENDOR_TCS
+	}, {
+		.compatible = "tcs,tcs4526",
+		.data = (void *)FAN53526_VENDOR_TCS
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
+
+static int fan53555_regulator_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct device_node *np = client->dev.of_node;
+	struct fan53555_device_info *di;
+	struct fan53555_platform_data *pdata;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	unsigned int val;
+	int ret;
+
+	di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
+					GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
+		pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
+
+	if (!pdata || !pdata->regulator) {
+		dev_err(&client->dev, "Platform data not found!\n");
+		return -ENODEV;
+	}
+
+	di->regulator = pdata->regulator;
+	if (client->dev.of_node) {
+		di->vendor =
+			(unsigned long)of_device_get_match_data(&client->dev);
+	} else {
+		/* if no ramp constraint set, get the pdata ramp_delay */
+		if (!di->regulator->constraints.ramp_delay) {
+			if (pdata->slew_rate >= ARRAY_SIZE(slew_rates)) {
+				dev_err(&client->dev, "Invalid slew_rate\n");
+				return -EINVAL;
+			}
+
+			di->regulator->constraints.ramp_delay
+					= slew_rates[pdata->slew_rate];
+		}
+
+		di->vendor = id->driver_data;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+	di->dev = &client->dev;
+	i2c_set_clientdata(client, di);
+	/* Get chip ID */
+	ret = regmap_read(regmap, FAN53555_ID1, &val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to get chip ID!\n");
+		return ret;
+	}
+	di->chip_id = val & DIE_ID;
+	/* Get chip revision */
+	ret = regmap_read(regmap, FAN53555_ID2, &val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to get chip Rev!\n");
+		return ret;
+	}
+	di->chip_rev = val & DIE_REV;
+	dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
+				di->chip_id, di->chip_rev);
+	/* Device init */
+	ret = fan53555_device_setup(di, pdata);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to setup device!\n");
+		return ret;
+	}
+	/* Register regulator */
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = regmap;
+	config.driver_data = di;
+	config.of_node = np;
+
+	ret = fan53555_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to register regulator!\n");
+	return ret;
+
+}
+
+static const struct i2c_device_id fan53555_id[] = {
+	{
+		.name = "fan53526",
+		.driver_data = FAN53526_VENDOR_FAIRCHILD
+	}, {
+		.name = "fan53555",
+		.driver_data = FAN53555_VENDOR_FAIRCHILD
+	}, {
+		.name = "syr827",
+		.driver_data = FAN53555_VENDOR_SILERGY
+	}, {
+		.name = "syr828",
+		.driver_data = FAN53555_VENDOR_SILERGY
+	}, {
+		.name = "tcs4525",
+		.driver_data = FAN53526_VENDOR_TCS
+	}, {
+		.name = "tcs4526",
+		.driver_data = FAN53526_VENDOR_TCS
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, fan53555_id);
+
+static struct i2c_driver fan53555_regulator_driver = {
+	.driver = {
+		.name = "fan53555-regulator",
+		.of_match_table = of_match_ptr(fan53555_dt_ids),
+	},
+	.probe_new = fan53555_regulator_probe,
+	.id_table = fan53555_id,
+};
+
+module_i2c_driver(fan53555_regulator_driver);
+
+MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
+MODULE_DESCRIPTION("FAN53555 regulator driver");
+MODULE_LICENSE("GPL v2");