Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 785 insertions, 0 deletions

diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c
new file mode 100644
index 000000000..f38567509
--- /dev/null
+++ b/drivers/regulator/twl6030-regulator.c
@@ -0,0 +1,785 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Split TWL6030 logic from twl-regulator.c:
+ * Copyright (C) 2008 David Brownell
+ *
+ * Copyright (C) 2016 Nicolae Rosia <nicolae.rosia@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/twl.h>
+#include <linux/delay.h>
+
+struct twlreg_info {
+	/* start of regulator's PM_RECEIVER control register bank */
+	u8			base;
+
+	/* twl resource ID, for resource control state machine */
+	u8			id;
+
+	u8			flags;
+
+	/* used by regulator core */
+	struct regulator_desc	desc;
+
+	/* chip specific features */
+	unsigned long		features;
+
+	/* data passed from board for external get/set voltage */
+	void			*data;
+};
+
+
+/* LDO control registers ... offset is from the base of its register bank.
+ * The first three registers of all power resource banks help hardware to
+ * manage the various resource groups.
+ */
+/* Common offset in TWL4030/6030 */
+#define VREG_GRP		0
+/* TWL6030 register offsets */
+#define VREG_TRANS		1
+#define VREG_STATE		2
+#define VREG_VOLTAGE		3
+#define VREG_VOLTAGE_SMPS	4
+/* TWL6030 Misc register offsets */
+#define VREG_BC_ALL		1
+#define VREG_BC_REF		2
+#define VREG_BC_PROC		3
+#define VREG_BC_CLK_RST		4
+
+/* TWL6030 LDO register values for VREG_VOLTAGE */
+#define TWL6030_VREG_VOLTAGE_WR_S   BIT(7)
+
+/* TWL6030 LDO register values for CFG_STATE */
+#define TWL6030_CFG_STATE_OFF	0x00
+#define TWL6030_CFG_STATE_ON	0x01
+#define TWL6030_CFG_STATE_OFF2	0x02
+#define TWL6030_CFG_STATE_SLEEP	0x03
+#define TWL6030_CFG_STATE_GRP_SHIFT	5
+#define TWL6030_CFG_STATE_APP_SHIFT	2
+#define TWL6030_CFG_STATE_MASK		0x03
+#define TWL6030_CFG_STATE_APP_MASK	(0x03 << TWL6030_CFG_STATE_APP_SHIFT)
+#define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
+						TWL6030_CFG_STATE_APP_SHIFT)
+
+/* Flags for SMPS Voltage reading and LDO reading*/
+#define SMPS_OFFSET_EN		BIT(0)
+#define SMPS_EXTENDED_EN	BIT(1)
+#define TWL_6030_WARM_RESET	BIT(3)
+
+/* twl6032 SMPS EPROM values */
+#define TWL6030_SMPS_OFFSET		0xB0
+#define TWL6030_SMPS_MULT		0xB3
+#define SMPS_MULTOFFSET_SMPS4	BIT(0)
+#define SMPS_MULTOFFSET_VIO	BIT(1)
+#define SMPS_MULTOFFSET_SMPS3	BIT(6)
+
+static inline int
+twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
+{
+	u8 value;
+	int status;
+
+	status = twl_i2c_read_u8(slave_subgp,
+			&value, info->base + offset);
+	return (status < 0) ? status : value;
+}
+
+static inline int
+twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
+						 u8 value)
+{
+	return twl_i2c_write_u8(slave_subgp,
+			value, info->base + offset);
+}
+
+/* generic power resource operations, which work on all regulators */
+static int twlreg_grp(struct regulator_dev *rdev)
+{
+	return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
+								 VREG_GRP);
+}
+
+/*
+ * Enable/disable regulators by joining/leaving the P1 (processor) group.
+ * We assume nobody else is updating the DEV_GRP registers.
+ */
+/* definition for 6030 family */
+#define P3_GRP_6030	BIT(2)		/* secondary processor, modem, etc */
+#define P2_GRP_6030	BIT(1)		/* "peripherals" */
+#define P1_GRP_6030	BIT(0)		/* CPU/Linux */
+
+static int twl6030reg_is_enabled(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int			grp = 0, val;
+
+	if (!(twl_class_is_6030() && (info->features & TWL6032_SUBCLASS))) {
+		grp = twlreg_grp(rdev);
+		if (grp < 0)
+			return grp;
+		grp &= P1_GRP_6030;
+		val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
+		val = TWL6030_CFG_STATE_APP(val);
+	} else {
+		val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
+		val &= TWL6030_CFG_STATE_MASK;
+		grp = 1;
+	}
+
+	return grp && (val == TWL6030_CFG_STATE_ON);
+}
+
+#define PB_I2C_BUSY	BIT(0)
+#define PB_I2C_BWEN	BIT(1)
+
+
+static int twl6030reg_enable(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int			grp = 0;
+	int			ret;
+
+	if (!(twl_class_is_6030() && (info->features & TWL6032_SUBCLASS)))
+		grp = twlreg_grp(rdev);
+	if (grp < 0)
+		return grp;
+
+	ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+			grp << TWL6030_CFG_STATE_GRP_SHIFT |
+			TWL6030_CFG_STATE_ON);
+	return ret;
+}
+
+static int twl6030reg_disable(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int			grp = 0;
+	int			ret;
+
+	if (!(twl_class_is_6030() && (info->features & TWL6032_SUBCLASS)))
+		grp = P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030;
+
+	/* For 6030, set the off state for all grps enabled */
+	ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+			(grp) << TWL6030_CFG_STATE_GRP_SHIFT |
+			TWL6030_CFG_STATE_OFF);
+
+	return ret;
+}
+
+static int twl6030reg_get_status(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int			val;
+
+	val = twlreg_grp(rdev);
+	if (val < 0)
+		return val;
+
+	val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
+
+	if (info->features & TWL6032_SUBCLASS)
+		val &= TWL6030_CFG_STATE_MASK;
+	else
+		val = TWL6030_CFG_STATE_APP(val);
+
+	switch (val) {
+	case TWL6030_CFG_STATE_ON:
+		return REGULATOR_STATUS_NORMAL;
+
+	case TWL6030_CFG_STATE_SLEEP:
+		return REGULATOR_STATUS_STANDBY;
+
+	case TWL6030_CFG_STATE_OFF:
+	case TWL6030_CFG_STATE_OFF2:
+	default:
+		break;
+	}
+
+	return REGULATOR_STATUS_OFF;
+}
+
+static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int grp = 0;
+	int val;
+
+	if (!(twl_class_is_6030() && (info->features & TWL6032_SUBCLASS)))
+		grp = twlreg_grp(rdev);
+
+	if (grp < 0)
+		return grp;
+
+	/* Compose the state register settings */
+	val = grp << TWL6030_CFG_STATE_GRP_SHIFT;
+	/* We can only set the mode through state machine commands... */
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val |= TWL6030_CFG_STATE_ON;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val |= TWL6030_CFG_STATE_SLEEP;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, val);
+}
+
+static int twl6030coresmps_set_voltage(struct regulator_dev *rdev, int min_uV,
+	int max_uV, unsigned *selector)
+{
+	return -ENODEV;
+}
+
+static int twl6030coresmps_get_voltage(struct regulator_dev *rdev)
+{
+	return -ENODEV;
+}
+
+static const struct regulator_ops twl6030coresmps_ops = {
+	.set_voltage	= twl6030coresmps_set_voltage,
+	.get_voltage	= twl6030coresmps_get_voltage,
+};
+
+static int
+twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+
+	if (info->flags & TWL_6030_WARM_RESET)
+		selector |= TWL6030_VREG_VOLTAGE_WR_S;
+
+	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
+			    selector);
+}
+
+static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
+
+	if (info->flags & TWL_6030_WARM_RESET)
+		vsel &= ~TWL6030_VREG_VOLTAGE_WR_S;
+
+	return vsel;
+}
+
+static const struct regulator_ops twl6030ldo_ops = {
+	.list_voltage	= regulator_list_voltage_linear_range,
+
+	.set_voltage_sel = twl6030ldo_set_voltage_sel,
+	.get_voltage_sel = twl6030ldo_get_voltage_sel,
+
+	.enable		= twl6030reg_enable,
+	.disable	= twl6030reg_disable,
+	.is_enabled	= twl6030reg_is_enabled,
+
+	.set_mode	= twl6030reg_set_mode,
+
+	.get_status	= twl6030reg_get_status,
+};
+
+static const struct regulator_ops twl6030fixed_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
+
+	.enable		= twl6030reg_enable,
+	.disable	= twl6030reg_disable,
+	.is_enabled	= twl6030reg_is_enabled,
+
+	.set_mode	= twl6030reg_set_mode,
+
+	.get_status	= twl6030reg_get_status,
+};
+
+/*
+ * SMPS status and control
+ */
+
+static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+
+	int voltage = 0;
+
+	switch (info->flags) {
+	case SMPS_OFFSET_EN:
+		voltage = 100000;
+		fallthrough;
+	case 0:
+		switch (index) {
+		case 0:
+			voltage = 0;
+			break;
+		case 58:
+			voltage = 1350 * 1000;
+			break;
+		case 59:
+			voltage = 1500 * 1000;
+			break;
+		case 60:
+			voltage = 1800 * 1000;
+			break;
+		case 61:
+			voltage = 1900 * 1000;
+			break;
+		case 62:
+			voltage = 2100 * 1000;
+			break;
+		default:
+			voltage += (600000 + (12500 * (index - 1)));
+		}
+		break;
+	case SMPS_EXTENDED_EN:
+		switch (index) {
+		case 0:
+			voltage = 0;
+			break;
+		case 58:
+			voltage = 2084 * 1000;
+			break;
+		case 59:
+			voltage = 2315 * 1000;
+			break;
+		case 60:
+			voltage = 2778 * 1000;
+			break;
+		case 61:
+			voltage = 2932 * 1000;
+			break;
+		case 62:
+			voltage = 3241 * 1000;
+			break;
+		default:
+			voltage = (1852000 + (38600 * (index - 1)));
+		}
+		break;
+	case SMPS_OFFSET_EN | SMPS_EXTENDED_EN:
+		switch (index) {
+		case 0:
+			voltage = 0;
+			break;
+		case 58:
+			voltage = 4167 * 1000;
+			break;
+		case 59:
+			voltage = 2315 * 1000;
+			break;
+		case 60:
+			voltage = 2778 * 1000;
+			break;
+		case 61:
+			voltage = 2932 * 1000;
+			break;
+		case 62:
+			voltage = 3241 * 1000;
+			break;
+		default:
+			voltage = (2161000 + (38600 * (index - 1)));
+		}
+		break;
+	}
+
+	return voltage;
+}
+
+static int twl6030smps_map_voltage(struct regulator_dev *rdev, int min_uV,
+				   int max_uV)
+{
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
+	int vsel = 0;
+
+	switch (info->flags) {
+	case 0:
+		if (min_uV == 0)
+			vsel = 0;
+		else if ((min_uV >= 600000) && (min_uV <= 1300000)) {
+			vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
+			vsel++;
+		}
+		/* Values 1..57 for vsel are linear and can be calculated
+		 * values 58..62 are non linear.
+		 */
+		else if ((min_uV > 1900000) && (min_uV <= 2100000))
+			vsel = 62;
+		else if ((min_uV > 1800000) && (min_uV <= 1900000))
+			vsel = 61;
+		else if ((min_uV > 1500000) && (min_uV <= 1800000))
+			vsel = 60;
+		else if ((min_uV > 1350000) && (min_uV <= 1500000))
+			vsel = 59;
+		else if ((min_uV > 1300000) && (min_uV <= 1350000))
+			vsel = 58;
+		else
+			return -EINVAL;
+		break;
+	case SMPS_OFFSET_EN:
+		if (min_uV == 0)
+			vsel = 0;
+		else if ((min_uV >= 700000) && (min_uV <= 1420000)) {
+			vsel = DIV_ROUND_UP(min_uV - 700000, 12500);
+			vsel++;
+		}
+		/* Values 1..57 for vsel are linear and can be calculated
+		 * values 58..62 are non linear.
+		 */
+		else if ((min_uV > 1900000) && (min_uV <= 2100000))
+			vsel = 62;
+		else if ((min_uV > 1800000) && (min_uV <= 1900000))
+			vsel = 61;
+		else if ((min_uV > 1500000) && (min_uV <= 1800000))
+			vsel = 60;
+		else if ((min_uV > 1350000) && (min_uV <= 1500000))
+			vsel = 59;
+		else
+			return -EINVAL;
+		break;
+	case SMPS_EXTENDED_EN:
+		if (min_uV == 0) {
+			vsel = 0;
+		} else if ((min_uV >= 1852000) && (max_uV <= 4013600)) {
+			vsel = DIV_ROUND_UP(min_uV - 1852000, 38600);
+			vsel++;
+		}
+		break;
+	case SMPS_OFFSET_EN|SMPS_EXTENDED_EN:
+		if (min_uV == 0) {
+			vsel = 0;
+		} else if ((min_uV >= 2161000) && (min_uV <= 4321000)) {
+			vsel = DIV_ROUND_UP(min_uV - 2161000, 38600);
+			vsel++;
+		}
+		break;
+	}
+
+	return vsel;
+}
+
+static int twl6030smps_set_voltage_sel(struct regulator_dev *rdev,
+				       unsigned int selector)
+{
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
+
+	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS,
+			    selector);
+}
+
+static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct twlreg_info	*info = rdev_get_drvdata(rdev);
+
+	return twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS);
+}
+
+static const struct regulator_ops twlsmps_ops = {
+	.list_voltage		= twl6030smps_list_voltage,
+	.map_voltage		= twl6030smps_map_voltage,
+
+	.set_voltage_sel	= twl6030smps_set_voltage_sel,
+	.get_voltage_sel	= twl6030smps_get_voltage_sel,
+
+	.enable			= twl6030reg_enable,
+	.disable		= twl6030reg_disable,
+	.is_enabled		= twl6030reg_is_enabled,
+
+	.set_mode		= twl6030reg_set_mode,
+
+	.get_status		= twl6030reg_get_status,
+};
+
+/*----------------------------------------------------------------------*/
+static const struct linear_range twl6030ldo_linear_range[] = {
+	REGULATOR_LINEAR_RANGE(0, 0, 0, 0),
+	REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000),
+	REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0),
+};
+
+#define TWL6030_ADJUSTABLE_SMPS(label) \
+static const struct twlreg_info TWL6030_INFO_##label = { \
+	.desc = { \
+		.name = #label, \
+		.id = TWL6030_REG_##label, \
+		.ops = &twl6030coresmps_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		}, \
+	}
+
+#define TWL6030_ADJUSTABLE_LDO(label, offset) \
+static const struct twlreg_info TWL6030_INFO_##label = { \
+	.base = offset, \
+	.desc = { \
+		.name = #label, \
+		.id = TWL6030_REG_##label, \
+		.n_voltages = 32, \
+		.linear_ranges = twl6030ldo_linear_range, \
+		.n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
+		.ops = &twl6030ldo_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		}, \
+	}
+
+#define TWL6032_ADJUSTABLE_LDO(label, offset) \
+static const struct twlreg_info TWL6032_INFO_##label = { \
+	.base = offset, \
+	.features = TWL6032_SUBCLASS, \
+	.desc = { \
+		.name = #label, \
+		.id = TWL6032_REG_##label, \
+		.n_voltages = 32, \
+		.linear_ranges = twl6030ldo_linear_range, \
+		.n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
+		.ops = &twl6030ldo_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		}, \
+	}
+
+#define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
+static const struct twlreg_info TWLFIXED_INFO_##label = { \
+	.base = offset, \
+	.id = 0, \
+	.desc = { \
+		.name = #label, \
+		.id = TWL6030##_REG_##label, \
+		.n_voltages = 1, \
+		.ops = &twl6030fixed_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		.min_uV = mVolts * 1000, \
+		.enable_time = turnon_delay, \
+		.of_map_mode = NULL, \
+		}, \
+	}
+
+#define TWL6032_ADJUSTABLE_SMPS(label, offset) \
+static const struct twlreg_info TWLSMPS_INFO_##label = { \
+	.base = offset, \
+	.features = TWL6032_SUBCLASS, \
+	.desc = { \
+		.name = #label, \
+		.id = TWL6032_REG_##label, \
+		.n_voltages = 63, \
+		.ops = &twlsmps_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		}, \
+	}
+
+/* VUSBCP is managed *only* by the USB subchip */
+/* 6030 REG with base as PMC Slave Misc : 0x0030 */
+/* Turnon-delay and remap configuration values for 6030 are not
+   verified since the specification is not public */
+TWL6030_ADJUSTABLE_SMPS(VDD1);
+TWL6030_ADJUSTABLE_SMPS(VDD2);
+TWL6030_ADJUSTABLE_SMPS(VDD3);
+TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54);
+TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58);
+TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c);
+TWL6030_ADJUSTABLE_LDO(VMMC, 0x68);
+TWL6030_ADJUSTABLE_LDO(VPP, 0x6c);
+TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74);
+/* 6025 are renamed compared to 6030 versions */
+TWL6032_ADJUSTABLE_LDO(LDO2, 0x54);
+TWL6032_ADJUSTABLE_LDO(LDO4, 0x58);
+TWL6032_ADJUSTABLE_LDO(LDO3, 0x5c);
+TWL6032_ADJUSTABLE_LDO(LDO5, 0x68);
+TWL6032_ADJUSTABLE_LDO(LDO1, 0x6c);
+TWL6032_ADJUSTABLE_LDO(LDO7, 0x74);
+TWL6032_ADJUSTABLE_LDO(LDO6, 0x60);
+TWL6032_ADJUSTABLE_LDO(LDOLN, 0x64);
+TWL6032_ADJUSTABLE_LDO(LDOUSB, 0x70);
+TWL6030_FIXED_LDO(VANA, 0x50, 2100, 0);
+TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 0);
+TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0);
+TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0);
+TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0);
+TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0);
+TWL6032_ADJUSTABLE_SMPS(SMPS3, 0x34);
+TWL6032_ADJUSTABLE_SMPS(SMPS4, 0x10);
+TWL6032_ADJUSTABLE_SMPS(VIO, 0x16);
+
+static u8 twl_get_smps_offset(void)
+{
+	u8 value;
+
+	twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value,
+			TWL6030_SMPS_OFFSET);
+	return value;
+}
+
+static u8 twl_get_smps_mult(void)
+{
+	u8 value;
+
+	twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value,
+			TWL6030_SMPS_MULT);
+	return value;
+}
+
+#define TWL_OF_MATCH(comp, family, label) \
+	{ \
+		.compatible = comp, \
+		.data = &family##_INFO_##label, \
+	}
+
+#define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label)
+#define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label)
+#define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label)
+#define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label)
+
+static const struct of_device_id twl_of_match[] = {
+	TWL6030_OF_MATCH("ti,twl6030-vdd1", VDD1),
+	TWL6030_OF_MATCH("ti,twl6030-vdd2", VDD2),
+	TWL6030_OF_MATCH("ti,twl6030-vdd3", VDD3),
+	TWL6030_OF_MATCH("ti,twl6030-vaux1", VAUX1_6030),
+	TWL6030_OF_MATCH("ti,twl6030-vaux2", VAUX2_6030),
+	TWL6030_OF_MATCH("ti,twl6030-vaux3", VAUX3_6030),
+	TWL6030_OF_MATCH("ti,twl6030-vmmc", VMMC),
+	TWL6030_OF_MATCH("ti,twl6030-vpp", VPP),
+	TWL6030_OF_MATCH("ti,twl6030-vusim", VUSIM),
+	TWL6032_OF_MATCH("ti,twl6032-ldo2", LDO2),
+	TWL6032_OF_MATCH("ti,twl6032-ldo4", LDO4),
+	TWL6032_OF_MATCH("ti,twl6032-ldo3", LDO3),
+	TWL6032_OF_MATCH("ti,twl6032-ldo5", LDO5),
+	TWL6032_OF_MATCH("ti,twl6032-ldo1", LDO1),
+	TWL6032_OF_MATCH("ti,twl6032-ldo7", LDO7),
+	TWL6032_OF_MATCH("ti,twl6032-ldo6", LDO6),
+	TWL6032_OF_MATCH("ti,twl6032-ldoln", LDOLN),
+	TWL6032_OF_MATCH("ti,twl6032-ldousb", LDOUSB),
+	TWLFIXED_OF_MATCH("ti,twl6030-vana", VANA),
+	TWLFIXED_OF_MATCH("ti,twl6030-vcxio", VCXIO),
+	TWLFIXED_OF_MATCH("ti,twl6030-vdac", VDAC),
+	TWLFIXED_OF_MATCH("ti,twl6030-vusb", VUSB),
+	TWLFIXED_OF_MATCH("ti,twl6030-v1v8", V1V8),
+	TWLFIXED_OF_MATCH("ti,twl6030-v2v1", V2V1),
+	TWLSMPS_OF_MATCH("ti,twl6032-smps3", SMPS3),
+	TWLSMPS_OF_MATCH("ti,twl6032-smps4", SMPS4),
+	TWLSMPS_OF_MATCH("ti,twl6032-vio", VIO),
+	{},
+};
+MODULE_DEVICE_TABLE(of, twl_of_match);
+
+static int twlreg_probe(struct platform_device *pdev)
+{
+	int id;
+	struct twlreg_info		*info;
+	const struct twlreg_info	*template;
+	struct regulator_init_data	*initdata;
+	struct regulation_constraints	*c;
+	struct regulator_dev		*rdev;
+	struct regulator_config		config = { };
+	struct device_node		*np = pdev->dev.of_node;
+
+	template = of_device_get_match_data(&pdev->dev);
+	if (!template)
+		return -ENODEV;
+
+	id = template->desc.id;
+	initdata = of_get_regulator_init_data(&pdev->dev, np, &template->desc);
+	if (!initdata)
+		return -EINVAL;
+
+	info = devm_kmemdup(&pdev->dev, template, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	/* Constrain board-specific capabilities according to what
+	 * this driver and the chip itself can actually do.
+	 */
+	c = &initdata->constraints;
+	c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
+	c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
+				| REGULATOR_CHANGE_MODE
+				| REGULATOR_CHANGE_STATUS;
+
+	switch (id) {
+	case TWL6032_REG_SMPS3:
+		if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS3)
+			info->flags |= SMPS_EXTENDED_EN;
+		if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS3)
+			info->flags |= SMPS_OFFSET_EN;
+		break;
+	case TWL6032_REG_SMPS4:
+		if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS4)
+			info->flags |= SMPS_EXTENDED_EN;
+		if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS4)
+			info->flags |= SMPS_OFFSET_EN;
+		break;
+	case TWL6032_REG_VIO:
+		if (twl_get_smps_mult() & SMPS_MULTOFFSET_VIO)
+			info->flags |= SMPS_EXTENDED_EN;
+		if (twl_get_smps_offset() & SMPS_MULTOFFSET_VIO)
+			info->flags |= SMPS_OFFSET_EN;
+		break;
+	}
+
+	if (of_get_property(np, "ti,retain-on-reset", NULL))
+		info->flags |= TWL_6030_WARM_RESET;
+
+	config.dev = &pdev->dev;
+	config.init_data = initdata;
+	config.driver_data = info;
+	config.of_node = np;
+
+	rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "can't register %s, %ld\n",
+				info->desc.name, PTR_ERR(rdev));
+		return PTR_ERR(rdev);
+	}
+	platform_set_drvdata(pdev, rdev);
+
+	/* NOTE:  many regulators support short-circuit IRQs (presentable
+	 * as REGULATOR_OVER_CURRENT notifications?) configured via:
+	 *  - SC_CONFIG
+	 *  - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
+	 *  - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
+	 *  - IT_CONFIG
+	 */
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:twl6030_reg");
+
+static struct platform_driver twlreg_driver = {
+	.probe		= twlreg_probe,
+	/* NOTE: short name, to work around driver model truncation of
+	 * "twl_regulator.12" (and friends) to "twl_regulator.1".
+	 */
+	.driver  = {
+		.name  = "twl6030_reg",
+		.of_match_table = of_match_ptr(twl_of_match),
+	},
+};
+
+static int __init twlreg_init(void)
+{
+	return platform_driver_register(&twlreg_driver);
+}
+subsys_initcall(twlreg_init);
+
+static void __exit twlreg_exit(void)
+{
+	platform_driver_unregister(&twlreg_driver);
+}
+module_exit(twlreg_exit)
+
+MODULE_DESCRIPTION("TWL6030 regulator driver");
+MODULE_LICENSE("GPL");