Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 954 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-ab-b5ze-s3.c b/drivers/rtc/rtc-ab-b5ze-s3.c
new file mode 100644
index 000000000..f2b0971d2
--- /dev/null
+++ b/drivers/rtc/rtc-ab-b5ze-s3.c
@@ -0,0 +1,954 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * rtc-ab-b5ze-s3 - Driver for Abracon AB-RTCMC-32.768Khz-B5ZE-S3
+ *                  I2C RTC / Alarm chip
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Detailed datasheet of the chip is available here:
+ *
+ *  https://www.abracon.com/realtimeclock/AB-RTCMC-32.768kHz-B5ZE-S3-Application-Manual.pdf
+ *
+ * This work is based on ISL12057 driver (drivers/rtc/rtc-isl12057.c).
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+
+#define DRV_NAME "rtc-ab-b5ze-s3"
+
+/* Control section */
+#define ABB5ZES3_REG_CTRL1	   0x00	   /* Control 1 register */
+#define ABB5ZES3_REG_CTRL1_CIE	   BIT(0)  /* Pulse interrupt enable */
+#define ABB5ZES3_REG_CTRL1_AIE	   BIT(1)  /* Alarm interrupt enable */
+#define ABB5ZES3_REG_CTRL1_SIE	   BIT(2)  /* Second interrupt enable */
+#define ABB5ZES3_REG_CTRL1_PM	   BIT(3)  /* 24h/12h mode */
+#define ABB5ZES3_REG_CTRL1_SR	   BIT(4)  /* Software reset */
+#define ABB5ZES3_REG_CTRL1_STOP	   BIT(5)  /* RTC circuit enable */
+#define ABB5ZES3_REG_CTRL1_CAP	   BIT(7)
+
+#define ABB5ZES3_REG_CTRL2	   0x01	   /* Control 2 register */
+#define ABB5ZES3_REG_CTRL2_CTBIE   BIT(0)  /* Countdown timer B int. enable */
+#define ABB5ZES3_REG_CTRL2_CTAIE   BIT(1)  /* Countdown timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_WTAIE   BIT(2)  /* Watchdog timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_AF	   BIT(3)  /* Alarm interrupt status */
+#define ABB5ZES3_REG_CTRL2_SF	   BIT(4)  /* Second interrupt status */
+#define ABB5ZES3_REG_CTRL2_CTBF	   BIT(5)  /* Countdown timer B int. status */
+#define ABB5ZES3_REG_CTRL2_CTAF	   BIT(6)  /* Countdown timer A int. status */
+#define ABB5ZES3_REG_CTRL2_WTAF	   BIT(7)  /* Watchdog timer A int. status */
+
+#define ABB5ZES3_REG_CTRL3	   0x02	   /* Control 3 register */
+#define ABB5ZES3_REG_CTRL3_PM2	   BIT(7)  /* Power Management bit 2 */
+#define ABB5ZES3_REG_CTRL3_PM1	   BIT(6)  /* Power Management bit 1 */
+#define ABB5ZES3_REG_CTRL3_PM0	   BIT(5)  /* Power Management bit 0 */
+#define ABB5ZES3_REG_CTRL3_BSF	   BIT(3)  /* Battery switchover int. status */
+#define ABB5ZES3_REG_CTRL3_BLF	   BIT(2)  /* Battery low int. status */
+#define ABB5ZES3_REG_CTRL3_BSIE	   BIT(1)  /* Battery switchover int. enable */
+#define ABB5ZES3_REG_CTRL3_BLIE	   BIT(0)  /* Battery low int. enable */
+
+#define ABB5ZES3_CTRL_SEC_LEN	   3
+
+/* RTC section */
+#define ABB5ZES3_REG_RTC_SC	   0x03	   /* RTC Seconds register */
+#define ABB5ZES3_REG_RTC_SC_OSC	   BIT(7)  /* Clock integrity status */
+#define ABB5ZES3_REG_RTC_MN	   0x04	   /* RTC Minutes register */
+#define ABB5ZES3_REG_RTC_HR	   0x05	   /* RTC Hours register */
+#define ABB5ZES3_REG_RTC_HR_PM	   BIT(5)  /* RTC Hours PM bit */
+#define ABB5ZES3_REG_RTC_DT	   0x06	   /* RTC Date register */
+#define ABB5ZES3_REG_RTC_DW	   0x07	   /* RTC Day of the week register */
+#define ABB5ZES3_REG_RTC_MO	   0x08	   /* RTC Month register */
+#define ABB5ZES3_REG_RTC_YR	   0x09	   /* RTC Year register */
+
+#define ABB5ZES3_RTC_SEC_LEN	   7
+
+/* Alarm section (enable bits are all active low) */
+#define ABB5ZES3_REG_ALRM_MN	   0x0A	   /* Alarm - minute register */
+#define ABB5ZES3_REG_ALRM_MN_AE	   BIT(7)  /* Minute enable */
+#define ABB5ZES3_REG_ALRM_HR	   0x0B	   /* Alarm - hours register */
+#define ABB5ZES3_REG_ALRM_HR_AE	   BIT(7)  /* Hour enable */
+#define ABB5ZES3_REG_ALRM_DT	   0x0C	   /* Alarm - date register */
+#define ABB5ZES3_REG_ALRM_DT_AE	   BIT(7)  /* Date (day of the month) enable */
+#define ABB5ZES3_REG_ALRM_DW	   0x0D	   /* Alarm - day of the week reg. */
+#define ABB5ZES3_REG_ALRM_DW_AE	   BIT(7)  /* Day of the week enable */
+
+#define ABB5ZES3_ALRM_SEC_LEN	   4
+
+/* Frequency offset section */
+#define ABB5ZES3_REG_FREQ_OF	   0x0E	   /* Frequency offset register */
+#define ABB5ZES3_REG_FREQ_OF_MODE  0x0E	   /* Offset mode: 2 hours / minute */
+
+/* CLOCKOUT section */
+#define ABB5ZES3_REG_TIM_CLK	   0x0F	   /* Timer & Clockout register */
+#define ABB5ZES3_REG_TIM_CLK_TAM   BIT(7)  /* Permanent/pulsed timer A/int. 2 */
+#define ABB5ZES3_REG_TIM_CLK_TBM   BIT(6)  /* Permanent/pulsed timer B */
+#define ABB5ZES3_REG_TIM_CLK_COF2  BIT(5)  /* Clkout Freq bit 2 */
+#define ABB5ZES3_REG_TIM_CLK_COF1  BIT(4)  /* Clkout Freq bit 1 */
+#define ABB5ZES3_REG_TIM_CLK_COF0  BIT(3)  /* Clkout Freq bit 0 */
+#define ABB5ZES3_REG_TIM_CLK_TAC1  BIT(2)  /* Timer A: - 01 : countdown */
+#define ABB5ZES3_REG_TIM_CLK_TAC0  BIT(1)  /*	       - 10 : timer	*/
+#define ABB5ZES3_REG_TIM_CLK_TBC   BIT(0)  /* Timer B enable */
+
+/* Timer A Section */
+#define ABB5ZES3_REG_TIMA_CLK	   0x10	   /* Timer A clock register */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ2 BIT(2)  /* Freq bit 2 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ1 BIT(1)  /* Freq bit 1 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ0 BIT(0)  /* Freq bit 0 */
+#define ABB5ZES3_REG_TIMA	   0x11	   /* Timer A register */
+
+#define ABB5ZES3_TIMA_SEC_LEN	   2
+
+/* Timer B Section */
+#define ABB5ZES3_REG_TIMB_CLK	   0x12	   /* Timer B clock register */
+#define ABB5ZES3_REG_TIMB_CLK_TBW2 BIT(6)
+#define ABB5ZES3_REG_TIMB_CLK_TBW1 BIT(5)
+#define ABB5ZES3_REG_TIMB_CLK_TBW0 BIT(4)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ2 BIT(2)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ1 BIT(1)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ0 BIT(0)
+#define ABB5ZES3_REG_TIMB	   0x13	   /* Timer B register */
+#define ABB5ZES3_TIMB_SEC_LEN	   2
+
+#define ABB5ZES3_MEM_MAP_LEN	   0x14
+
+struct abb5zes3_rtc_data {
+	struct rtc_device *rtc;
+	struct regmap *regmap;
+
+	int irq;
+
+	bool battery_low;
+	bool timer_alarm; /* current alarm is via timer A */
+};
+
+/*
+ * Try and match register bits w/ fixed null values to see whether we
+ * are dealing with an ABB5ZES3.
+ */
+static int abb5zes3_i2c_validate_chip(struct regmap *regmap)
+{
+	u8 regs[ABB5ZES3_MEM_MAP_LEN];
+	static const u8 mask[ABB5ZES3_MEM_MAP_LEN] = { 0x00, 0x00, 0x10, 0x00,
+						       0x80, 0xc0, 0xc0, 0xf8,
+						       0xe0, 0x00, 0x00, 0x40,
+						       0x40, 0x78, 0x00, 0x00,
+						       0xf8, 0x00, 0x88, 0x00 };
+	int ret, i;
+
+	ret = regmap_bulk_read(regmap, 0, regs, ABB5ZES3_MEM_MAP_LEN);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ABB5ZES3_MEM_MAP_LEN; ++i) {
+		if (regs[i] & mask[i]) /* check if bits are cleared */
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* Clear alarm status bit. */
+static int _abb5zes3_rtc_clear_alarm(struct device *dev)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+				 ABB5ZES3_REG_CTRL2_AF, 0);
+	if (ret)
+		dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret);
+
+	return ret;
+}
+
+/* Enable or disable alarm (i.e. alarm interrupt generation) */
+static int _abb5zes3_rtc_update_alarm(struct device *dev, bool enable)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL1,
+				 ABB5ZES3_REG_CTRL1_AIE,
+				 enable ? ABB5ZES3_REG_CTRL1_AIE : 0);
+	if (ret)
+		dev_err(dev, "%s: writing alarm INT failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+/* Enable or disable timer (watchdog timer A interrupt generation) */
+static int _abb5zes3_rtc_update_timer(struct device *dev, bool enable)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+				 ABB5ZES3_REG_CTRL2_WTAIE,
+				 enable ? ABB5ZES3_REG_CTRL2_WTAIE : 0);
+	if (ret)
+		dev_err(dev, "%s: writing timer INT failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+/*
+ * Note: we only read, so regmap inner lock protection is sufficient, i.e.
+ * we do not need driver's main lock protection.
+ */
+static int _abb5zes3_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+	int ret = 0;
+
+	/*
+	 * As we need to read CTRL1 register anyway to access 24/12h
+	 * mode bit, we do a single bulk read of both control and RTC
+	 * sections (they are consecutive). This also ease indexing
+	 * of register values after bulk read.
+	 */
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_CTRL1, regs,
+			       sizeof(regs));
+	if (ret) {
+		dev_err(dev, "%s: reading RTC time failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* If clock integrity is not guaranteed, do not return a time value */
+	if (regs[ABB5ZES3_REG_RTC_SC] & ABB5ZES3_REG_RTC_SC_OSC)
+		return -ENODATA;
+
+	tm->tm_sec = bcd2bin(regs[ABB5ZES3_REG_RTC_SC] & 0x7F);
+	tm->tm_min = bcd2bin(regs[ABB5ZES3_REG_RTC_MN]);
+
+	if (regs[ABB5ZES3_REG_CTRL1] & ABB5ZES3_REG_CTRL1_PM) { /* 12hr mode */
+		tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR] & 0x1f);
+		if (regs[ABB5ZES3_REG_RTC_HR] & ABB5ZES3_REG_RTC_HR_PM) /* PM */
+			tm->tm_hour += 12;
+	} else {						/* 24hr mode */
+		tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR]);
+	}
+
+	tm->tm_mday = bcd2bin(regs[ABB5ZES3_REG_RTC_DT]);
+	tm->tm_wday = bcd2bin(regs[ABB5ZES3_REG_RTC_DW]);
+	tm->tm_mon  = bcd2bin(regs[ABB5ZES3_REG_RTC_MO]) - 1; /* starts at 1 */
+	tm->tm_year = bcd2bin(regs[ABB5ZES3_REG_RTC_YR]) + 100;
+
+	return ret;
+}
+
+static int abb5zes3_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+	int ret;
+
+	regs[ABB5ZES3_REG_RTC_SC] = bin2bcd(tm->tm_sec); /* MSB=0 clears OSC */
+	regs[ABB5ZES3_REG_RTC_MN] = bin2bcd(tm->tm_min);
+	regs[ABB5ZES3_REG_RTC_HR] = bin2bcd(tm->tm_hour); /* 24-hour format */
+	regs[ABB5ZES3_REG_RTC_DT] = bin2bcd(tm->tm_mday);
+	regs[ABB5ZES3_REG_RTC_DW] = bin2bcd(tm->tm_wday);
+	regs[ABB5ZES3_REG_RTC_MO] = bin2bcd(tm->tm_mon + 1);
+	regs[ABB5ZES3_REG_RTC_YR] = bin2bcd(tm->tm_year - 100);
+
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_RTC_SC,
+				regs + ABB5ZES3_REG_RTC_SC,
+				ABB5ZES3_RTC_SEC_LEN);
+
+	return ret;
+}
+
+/*
+ * Set provided TAQ and Timer A registers (TIMA_CLK and TIMA) based on
+ * given number of seconds.
+ */
+static inline void sec_to_timer_a(u8 secs, u8 *taq, u8 *timer_a)
+{
+	*taq = ABB5ZES3_REG_TIMA_CLK_TAQ1; /* 1Hz */
+	*timer_a = secs;
+}
+
+/*
+ * Return current number of seconds in Timer A. As we only use
+ * timer A with a 1Hz freq, this is what we expect to have.
+ */
+static inline int sec_from_timer_a(u8 *secs, u8 taq, u8 timer_a)
+{
+	if (taq != ABB5ZES3_REG_TIMA_CLK_TAQ1) /* 1Hz */
+		return -EINVAL;
+
+	*secs = timer_a;
+
+	return 0;
+}
+
+/*
+ * Read alarm currently configured via a watchdog timer using timer A. This
+ * is done by reading current RTC time and adding remaining timer time.
+ */
+static int _abb5zes3_rtc_read_timer(struct device *dev,
+				    struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+	u8 regs[ABB5ZES3_TIMA_SEC_LEN + 1];
+	unsigned long rtc_secs;
+	unsigned int reg;
+	u8 timer_secs;
+	int ret;
+
+	/*
+	 * Instead of doing two separate calls, because they are consecutive,
+	 * we grab both clockout register and Timer A section. The latter is
+	 * used to decide if timer A is enabled (as a watchdog timer).
+	 */
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_TIM_CLK, regs,
+			       ABB5ZES3_TIMA_SEC_LEN + 1);
+	if (ret) {
+		dev_err(dev, "%s: reading Timer A section failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* get current time ... */
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		return ret;
+
+	/* ... convert to seconds ... */
+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
+
+	/* ... add remaining timer A time ... */
+	ret = sec_from_timer_a(&timer_secs, regs[1], regs[2]);
+	if (ret)
+		return ret;
+
+	/* ... and convert back. */
+	rtc_time64_to_tm(rtc_secs + timer_secs, alarm_tm);
+
+	ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL2, &reg);
+	if (ret) {
+		dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL2_WTAIE);
+
+	return 0;
+}
+
+/* Read alarm currently configured via a RTC alarm registers. */
+static int _abb5zes3_rtc_read_alarm(struct device *dev,
+				    struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+	unsigned long rtc_secs, alarm_secs;
+	u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+			       ABB5ZES3_ALRM_SEC_LEN);
+	if (ret) {
+		dev_err(dev, "%s: reading alarm section failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	alarm_tm->tm_sec  = 0;
+	alarm_tm->tm_min  = bcd2bin(regs[0] & 0x7f);
+	alarm_tm->tm_hour = bcd2bin(regs[1] & 0x3f);
+	alarm_tm->tm_mday = bcd2bin(regs[2] & 0x3f);
+	alarm_tm->tm_wday = -1;
+
+	/*
+	 * The alarm section does not store year/month. We use the ones in rtc
+	 * section as a basis and increment month and then year if needed to get
+	 * alarm after current time.
+	 */
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		return ret;
+
+	alarm_tm->tm_year = rtc_tm.tm_year;
+	alarm_tm->tm_mon = rtc_tm.tm_mon;
+
+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
+	alarm_secs = rtc_tm_to_time64(alarm_tm);
+
+	if (alarm_secs < rtc_secs) {
+		if (alarm_tm->tm_mon == 11) {
+			alarm_tm->tm_mon = 0;
+			alarm_tm->tm_year += 1;
+		} else {
+			alarm_tm->tm_mon += 1;
+		}
+	}
+
+	ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL1, &reg);
+	if (ret) {
+		dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL1_AIE);
+
+	return 0;
+}
+
+/*
+ * As the Alarm mechanism supported by the chip is only accurate to the
+ * minute, we use the watchdog timer mechanism provided by timer A
+ * (up to 256 seconds w/ a second accuracy) for low alarm values (below
+ * 4 minutes). Otherwise, we use the common alarm mechanism provided
+ * by the chip. In order for that to work, we keep track of currently
+ * configured timer type via 'timer_alarm' flag in our private data
+ * structure.
+ */
+static int abb5zes3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	if (data->timer_alarm)
+		ret = _abb5zes3_rtc_read_timer(dev, alarm);
+	else
+		ret = _abb5zes3_rtc_read_alarm(dev, alarm);
+
+	return ret;
+}
+
+/*
+ * Set alarm using chip alarm mechanism. It is only accurate to the
+ * minute (not the second). The function expects alarm interrupt to
+ * be disabled.
+ */
+static int _abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time *alarm_tm = &alarm->time;
+	u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+	struct rtc_time rtc_tm;
+	int ret, enable = 1;
+
+	if (!alarm->enabled) {
+		enable = 0;
+	} else {
+		unsigned long rtc_secs, alarm_secs;
+
+		/*
+		 * Chip only support alarms up to one month in the future. Let's
+		 * return an error if we get something after that limit.
+		 * Comparison is done by incrementing rtc_tm month field by one
+		 * and checking alarm value is still below.
+		 */
+		ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+		if (ret)
+			return ret;
+
+		if (rtc_tm.tm_mon == 11) { /* handle year wrapping */
+			rtc_tm.tm_mon = 0;
+			rtc_tm.tm_year += 1;
+		} else {
+			rtc_tm.tm_mon += 1;
+		}
+
+		rtc_secs = rtc_tm_to_time64(&rtc_tm);
+		alarm_secs = rtc_tm_to_time64(alarm_tm);
+
+		if (alarm_secs > rtc_secs) {
+			dev_err(dev, "%s: alarm maximum is one month in the future (%d)\n",
+				__func__, ret);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Program all alarm registers but DW one. For each register, setting
+	 * MSB to 0 enables associated alarm.
+	 */
+	regs[0] = bin2bcd(alarm_tm->tm_min) & 0x7f;
+	regs[1] = bin2bcd(alarm_tm->tm_hour) & 0x3f;
+	regs[2] = bin2bcd(alarm_tm->tm_mday) & 0x3f;
+	regs[3] = ABB5ZES3_REG_ALRM_DW_AE; /* do not match day of the week */
+
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+				ABB5ZES3_ALRM_SEC_LEN);
+	if (ret < 0) {
+		dev_err(dev, "%s: writing ALARM section failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Record currently configured alarm is not a timer */
+	data->timer_alarm = 0;
+
+	/* Enable or disable alarm interrupt generation */
+	return _abb5zes3_rtc_update_alarm(dev, enable);
+}
+
+/*
+ * Set alarm using timer watchdog (via timer A) mechanism. The function expects
+ * timer A interrupt to be disabled.
+ */
+static int _abb5zes3_rtc_set_timer(struct device *dev, struct rtc_wkalrm *alarm,
+				   u8 secs)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	u8 regs[ABB5ZES3_TIMA_SEC_LEN];
+	u8 mask = ABB5ZES3_REG_TIM_CLK_TAC0 | ABB5ZES3_REG_TIM_CLK_TAC1;
+	int ret = 0;
+
+	/* Program given number of seconds to Timer A registers */
+	sec_to_timer_a(secs, &regs[0], &regs[1]);
+	ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_TIMA_CLK, regs,
+				ABB5ZES3_TIMA_SEC_LEN);
+	if (ret < 0) {
+		dev_err(dev, "%s: writing timer section failed\n", __func__);
+		return ret;
+	}
+
+	/* Configure Timer A as a watchdog timer */
+	ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_TIM_CLK,
+				 mask, ABB5ZES3_REG_TIM_CLK_TAC1);
+	if (ret)
+		dev_err(dev, "%s: failed to update timer\n", __func__);
+
+	/* Record currently configured alarm is a timer */
+	data->timer_alarm = 1;
+
+	/* Enable or disable timer interrupt generation */
+	return _abb5zes3_rtc_update_timer(dev, alarm->enabled);
+}
+
+/*
+ * The chip has an alarm which is only accurate to the minute. In order to
+ * handle alarms below that limit, we use the watchdog timer function of
+ * timer A. More precisely, the timer method is used for alarms below 240
+ * seconds.
+ */
+static int abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct rtc_time *alarm_tm = &alarm->time;
+	unsigned long rtc_secs, alarm_secs;
+	struct rtc_time rtc_tm;
+	int ret;
+
+	ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		return ret;
+
+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
+	alarm_secs = rtc_tm_to_time64(alarm_tm);
+
+	/* Let's first disable both the alarm and the timer interrupts */
+	ret = _abb5zes3_rtc_update_alarm(dev, false);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable alarm (%d)\n", __func__,
+			ret);
+		return ret;
+	}
+	ret = _abb5zes3_rtc_update_timer(dev, false);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable timer (%d)\n", __func__,
+			ret);
+		return ret;
+	}
+
+	data->timer_alarm = 0;
+
+	/*
+	 * Let's now configure the alarm; if we are expected to ring in
+	 * more than 240s, then we setup an alarm. Otherwise, a timer.
+	 */
+	if ((alarm_secs > rtc_secs) && ((alarm_secs - rtc_secs) <= 240))
+		ret = _abb5zes3_rtc_set_timer(dev, alarm,
+					      alarm_secs - rtc_secs);
+	else
+		ret = _abb5zes3_rtc_set_alarm(dev, alarm);
+
+	if (ret)
+		dev_err(dev, "%s: unable to configure alarm (%d)\n", __func__,
+			ret);
+
+	return ret;
+}
+
+/* Enable or disable battery low irq generation */
+static inline int _abb5zes3_rtc_battery_low_irq_enable(struct regmap *regmap,
+						       bool enable)
+{
+	return regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3,
+				  ABB5ZES3_REG_CTRL3_BLIE,
+				  enable ? ABB5ZES3_REG_CTRL3_BLIE : 0);
+}
+
+/*
+ * Check current RTC status and enable/disable what needs to be. Return 0 if
+ * everything went ok and a negative value upon error.
+ */
+static int abb5zes3_rtc_check_setup(struct device *dev)
+{
+	struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+	struct regmap *regmap = data->regmap;
+	unsigned int reg;
+	int ret;
+	u8 mask;
+
+	/*
+	 * By default, the devices generates a 32.768KHz signal on IRQ#1 pin. It
+	 * is disabled here to prevent polluting the interrupt line and
+	 * uselessly triggering the IRQ handler we install for alarm and battery
+	 * low events. Note: this is done before clearing int. status below
+	 * in this function.
+	 * We also disable all timers and set timer interrupt to permanent (not
+	 * pulsed).
+	 */
+	mask = (ABB5ZES3_REG_TIM_CLK_TBC | ABB5ZES3_REG_TIM_CLK_TAC0 |
+		ABB5ZES3_REG_TIM_CLK_TAC1 | ABB5ZES3_REG_TIM_CLK_COF0 |
+		ABB5ZES3_REG_TIM_CLK_COF1 | ABB5ZES3_REG_TIM_CLK_COF2 |
+		ABB5ZES3_REG_TIM_CLK_TBM | ABB5ZES3_REG_TIM_CLK_TAM);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_TIM_CLK, mask,
+				 ABB5ZES3_REG_TIM_CLK_COF0 |
+				 ABB5ZES3_REG_TIM_CLK_COF1 |
+				 ABB5ZES3_REG_TIM_CLK_COF2);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize clkout register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Each component of the alarm (MN, HR, DT, DW) can be enabled/disabled
+	 * individually by clearing/setting MSB of each associated register. So,
+	 * we set all alarm enable bits to disable current alarm setting.
+	 */
+	mask = (ABB5ZES3_REG_ALRM_MN_AE | ABB5ZES3_REG_ALRM_HR_AE |
+		ABB5ZES3_REG_ALRM_DT_AE | ABB5ZES3_REG_ALRM_DW_AE);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, mask);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to disable alarm setting (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Set Control 1 register (RTC enabled, 24hr mode, all int. disabled) */
+	mask = (ABB5ZES3_REG_CTRL1_CIE | ABB5ZES3_REG_CTRL1_AIE |
+		ABB5ZES3_REG_CTRL1_SIE | ABB5ZES3_REG_CTRL1_PM |
+		ABB5ZES3_REG_CTRL1_CAP | ABB5ZES3_REG_CTRL1_STOP);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL1, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL1 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Set Control 2 register (timer int. disabled, alarm status cleared).
+	 * WTAF is read-only and cleared automatically by reading the register.
+	 */
+	mask = (ABB5ZES3_REG_CTRL2_CTBIE | ABB5ZES3_REG_CTRL2_CTAIE |
+		ABB5ZES3_REG_CTRL2_WTAIE | ABB5ZES3_REG_CTRL2_AF |
+		ABB5ZES3_REG_CTRL2_SF | ABB5ZES3_REG_CTRL2_CTBF |
+		ABB5ZES3_REG_CTRL2_CTAF);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL2 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Enable battery low detection function and battery switchover function
+	 * (standard mode). Disable associated interrupts. Clear battery
+	 * switchover flag but not battery low flag. The latter is checked
+	 * later below.
+	 */
+	mask = (ABB5ZES3_REG_CTRL3_PM0  | ABB5ZES3_REG_CTRL3_PM1 |
+		ABB5ZES3_REG_CTRL3_PM2  | ABB5ZES3_REG_CTRL3_BLIE |
+		ABB5ZES3_REG_CTRL3_BSIE | ABB5ZES3_REG_CTRL3_BSF);
+	ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, mask, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to initialize CTRL3 register (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Check oscillator integrity flag */
+	ret = regmap_read(regmap, ABB5ZES3_REG_RTC_SC, &reg);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to read osc. integrity flag (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	if (reg & ABB5ZES3_REG_RTC_SC_OSC) {
+		dev_err(dev, "clock integrity not guaranteed. Osc. has stopped or has been interrupted.\n");
+		dev_err(dev, "change battery (if not already done) and then set time to reset osc. failure flag.\n");
+	}
+
+	/*
+	 * Check battery low flag at startup: this allows reporting battery
+	 * is low at startup when IRQ line is not connected. Note: we record
+	 * current status to avoid reenabling this interrupt later in probe
+	 * function if battery is low.
+	 */
+	ret = regmap_read(regmap, ABB5ZES3_REG_CTRL3, &reg);
+	if (ret < 0) {
+		dev_err(dev, "%s: unable to read battery low flag (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	data->battery_low = reg & ABB5ZES3_REG_CTRL3_BLF;
+	if (data->battery_low) {
+		dev_err(dev, "RTC battery is low; please, consider changing it!\n");
+
+		ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, false);
+		if (ret)
+			dev_err(dev, "%s: disabling battery low interrupt generation failed (%d)\n",
+				__func__, ret);
+	}
+
+	return ret;
+}
+
+static int abb5zes3_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enable)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (rtc_data->irq) {
+		if (rtc_data->timer_alarm)
+			ret = _abb5zes3_rtc_update_timer(dev, enable);
+		else
+			ret = _abb5zes3_rtc_update_alarm(dev, enable);
+	}
+
+	return ret;
+}
+
+static irqreturn_t _abb5zes3_rtc_interrupt(int irq, void *data)
+{
+	struct i2c_client *client = data;
+	struct device *dev = &client->dev;
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+	struct rtc_device *rtc = rtc_data->rtc;
+	u8 regs[ABB5ZES3_CTRL_SEC_LEN];
+	int ret, handled = IRQ_NONE;
+
+	ret = regmap_bulk_read(rtc_data->regmap, 0, regs,
+			       ABB5ZES3_CTRL_SEC_LEN);
+	if (ret) {
+		dev_err(dev, "%s: unable to read control section (%d)!\n",
+			__func__, ret);
+		return handled;
+	}
+
+	/*
+	 * Check battery low detection flag and disable battery low interrupt
+	 * generation if flag is set (interrupt can only be cleared when
+	 * battery is replaced).
+	 */
+	if (regs[ABB5ZES3_REG_CTRL3] & ABB5ZES3_REG_CTRL3_BLF) {
+		dev_err(dev, "RTC battery is low; please change it!\n");
+
+		_abb5zes3_rtc_battery_low_irq_enable(rtc_data->regmap, false);
+
+		handled = IRQ_HANDLED;
+	}
+
+	/* Check alarm flag */
+	if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_AF) {
+		dev_dbg(dev, "RTC alarm!\n");
+
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+		/* Acknowledge and disable the alarm */
+		_abb5zes3_rtc_clear_alarm(dev);
+		_abb5zes3_rtc_update_alarm(dev, 0);
+
+		handled = IRQ_HANDLED;
+	}
+
+	/* Check watchdog Timer A flag */
+	if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_WTAF) {
+		dev_dbg(dev, "RTC timer!\n");
+
+		rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+		/*
+		 * Acknowledge and disable the alarm. Note: WTAF
+		 * flag had been cleared when reading CTRL2
+		 */
+		_abb5zes3_rtc_update_timer(dev, 0);
+
+		rtc_data->timer_alarm = 0;
+
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+	.read_time = _abb5zes3_rtc_read_time,
+	.set_time = abb5zes3_rtc_set_time,
+	.read_alarm = abb5zes3_rtc_read_alarm,
+	.set_alarm = abb5zes3_rtc_set_alarm,
+	.alarm_irq_enable = abb5zes3_rtc_alarm_irq_enable,
+};
+
+static const struct regmap_config abb5zes3_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int abb5zes3_probe(struct i2c_client *client)
+{
+	struct abb5zes3_rtc_data *data = NULL;
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &abb5zes3_rtc_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "%s: regmap allocation failed: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = abb5zes3_i2c_validate_chip(regmap);
+	if (ret)
+		return ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = regmap;
+	dev_set_drvdata(dev, data);
+
+	ret = abb5zes3_rtc_check_setup(dev);
+	if (ret)
+		return ret;
+
+	data->rtc = devm_rtc_allocate_device(dev);
+	ret = PTR_ERR_OR_ZERO(data->rtc);
+	if (ret) {
+		dev_err(dev, "%s: unable to allocate RTC device (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						_abb5zes3_rtc_interrupt,
+						IRQF_SHARED | IRQF_ONESHOT,
+						DRV_NAME, client);
+		if (!ret) {
+			device_init_wakeup(dev, true);
+			data->irq = client->irq;
+			dev_dbg(dev, "%s: irq %d used by RTC\n", __func__,
+				client->irq);
+		} else {
+			dev_err(dev, "%s: irq %d unavailable (%d)\n",
+				__func__, client->irq, ret);
+			goto err;
+		}
+	}
+
+	data->rtc->ops = &rtc_ops;
+	data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	data->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	/* Enable battery low detection interrupt if battery not already low */
+	if (!data->battery_low && data->irq) {
+		ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true);
+		if (ret) {
+			dev_err(dev, "%s: enabling battery low interrupt generation failed (%d)\n",
+				__func__, ret);
+			goto err;
+		}
+	}
+
+	ret = devm_rtc_register_device(data->rtc);
+
+err:
+	if (ret && data->irq)
+		device_init_wakeup(dev, false);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int abb5zes3_rtc_suspend(struct device *dev)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(rtc_data->irq);
+
+	return 0;
+}
+
+static int abb5zes3_rtc_resume(struct device *dev)
+{
+	struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(rtc_data->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(abb5zes3_rtc_pm_ops, abb5zes3_rtc_suspend,
+			 abb5zes3_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id abb5zes3_dt_match[] = {
+	{ .compatible = "abracon,abb5zes3" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, abb5zes3_dt_match);
+#endif
+
+static const struct i2c_device_id abb5zes3_id[] = {
+	{ "abb5zes3", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abb5zes3_id);
+
+static struct i2c_driver abb5zes3_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &abb5zes3_rtc_pm_ops,
+		.of_match_table = of_match_ptr(abb5zes3_dt_match),
+	},
+	.probe_new = abb5zes3_probe,
+	.id_table = abb5zes3_id,
+};
+module_i2c_driver(abb5zes3_driver);
+
+MODULE_AUTHOR("Arnaud EBALARD <arno@natisbad.org>");
+MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Alarm driver");
+MODULE_LICENSE("GPL");