Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 765 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
new file mode 100644
index 000000000..dd31a60c1
--- /dev/null
+++ b/drivers/rtc/rtc-ds3232.c
@@ -0,0 +1,765 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RTC client/driver for the Maxim/Dallas DS3232/DS3234 Real-Time Clock
+ *
+ * Copyright (C) 2009-2011 Freescale Semiconductor.
+ * Author: Jack Lan <jack.lan@freescale.com>
+ * Copyright (C) 2008 MIMOMax Wireless Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+
+#define DS3232_REG_SECONDS      0x00
+#define DS3232_REG_MINUTES      0x01
+#define DS3232_REG_HOURS        0x02
+#define DS3232_REG_AMPM         0x02
+#define DS3232_REG_DAY          0x03
+#define DS3232_REG_DATE         0x04
+#define DS3232_REG_MONTH        0x05
+#define DS3232_REG_CENTURY      0x05
+#define DS3232_REG_YEAR         0x06
+#define DS3232_REG_ALARM1       0x07       /* Alarm 1 BASE */
+#define DS3232_REG_ALARM2       0x0B       /* Alarm 2 BASE */
+#define DS3232_REG_CR           0x0E       /* Control register */
+#       define DS3232_REG_CR_nEOSC   0x80
+#       define DS3232_REG_CR_INTCN   0x04
+#       define DS3232_REG_CR_A2IE    0x02
+#       define DS3232_REG_CR_A1IE    0x01
+
+#define DS3232_REG_SR           0x0F       /* control/status register */
+#       define DS3232_REG_SR_OSF     0x80
+#       define DS3232_REG_SR_BSY     0x04
+#       define DS3232_REG_SR_A2F     0x02
+#       define DS3232_REG_SR_A1F     0x01
+
+#define DS3232_REG_TEMPERATURE	0x11
+#define DS3232_REG_SRAM_START   0x14
+#define DS3232_REG_SRAM_END     0xFF
+
+#define DS3232_REG_SRAM_SIZE    236
+
+struct ds3232 {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq;
+	struct rtc_device *rtc;
+
+	bool suspended;
+};
+
+static int ds3232_check_rtc_status(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret = 0;
+	int control, stat;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & DS3232_REG_SR_OSF)
+		dev_warn(dev,
+				"oscillator discontinuity flagged, "
+				"time unreliable\n");
+
+	stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		return ret;
+
+	/* If the alarm is pending, clear it before requesting
+	 * the interrupt, so an interrupt event isn't reported
+	 * before everything is initialized.
+	 */
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	control |= DS3232_REG_CR_INTCN;
+
+	return regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+}
+
+static int ds3232_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret;
+	u8 buf[7];
+	unsigned int year, month, day, hour, minute, second;
+	unsigned int week, twelve_hr, am_pm;
+	unsigned int century, add_century = 0;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+	if (ret)
+		return ret;
+
+	second = buf[0];
+	minute = buf[1];
+	hour = buf[2];
+	week = buf[3];
+	day = buf[4];
+	month = buf[5];
+	year = buf[6];
+
+	/* Extract additional information for AM/PM and century */
+
+	twelve_hr = hour & 0x40;
+	am_pm = hour & 0x20;
+	century = month & 0x80;
+
+	/* Write to rtc_time structure */
+
+	time->tm_sec = bcd2bin(second);
+	time->tm_min = bcd2bin(minute);
+	if (twelve_hr) {
+		/* Convert to 24 hr */
+		if (am_pm)
+			time->tm_hour = bcd2bin(hour & 0x1F) + 12;
+		else
+			time->tm_hour = bcd2bin(hour & 0x1F);
+	} else {
+		time->tm_hour = bcd2bin(hour);
+	}
+
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	time->tm_wday = bcd2bin(week) - 1;
+	time->tm_mday = bcd2bin(day);
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	time->tm_mon = bcd2bin(month & 0x7F) - 1;
+	if (century)
+		add_century = 100;
+
+	time->tm_year = bcd2bin(year) + add_century;
+
+	return 0;
+}
+
+static int ds3232_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 buf[7];
+
+	/* Extract time from rtc_time and load into ds3232*/
+
+	buf[0] = bin2bcd(time->tm_sec);
+	buf[1] = bin2bcd(time->tm_min);
+	buf[2] = bin2bcd(time->tm_hour);
+	/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+	buf[3] = bin2bcd(time->tm_wday + 1);
+	buf[4] = bin2bcd(time->tm_mday); /* Date */
+	/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+	buf[5] = bin2bcd(time->tm_mon + 1);
+	if (time->tm_year >= 100) {
+		buf[5] |= 0x80;
+		buf[6] = bin2bcd(time->tm_year - 100);
+	} else {
+		buf[6] = bin2bcd(time->tm_year);
+	}
+
+	return regmap_bulk_write(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+}
+
+/*
+ * DS3232 has two alarm, we only use alarm1
+ * According to linux specification, only support one-shot alarm
+ * no periodic alarm mode
+ */
+static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
+	alarm->time.tm_min = bcd2bin(buf[1] & 0x7F);
+	alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
+	alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
+
+	alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
+	alarm->pending = !!(stat & DS3232_REG_SR_A1F);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/*
+ * linux rtc-module does not support wday alarm
+ * and only 24h time mode supported indeed
+ */
+static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control, stat;
+	int ret;
+	u8 buf[4];
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	buf[0] = bin2bcd(alarm->time.tm_sec);
+	buf[1] = bin2bcd(alarm->time.tm_min);
+	buf[2] = bin2bcd(alarm->time.tm_hour);
+	buf[3] = bin2bcd(alarm->time.tm_mday);
+
+	/* clear alarm interrupt enable bit */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		goto out;
+	control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	if (ret)
+		goto out;
+
+	/* clear any pending alarm flag */
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto out;
+	stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+	if (ret)
+		goto out;
+
+	ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+	if (ret)
+		goto out;
+
+	if (alarm->enabled) {
+		control |= DS3232_REG_CR_A1IE;
+		ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+	}
+out:
+	return ret;
+}
+
+static int ds3232_update_alarm(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int control;
+	int ret;
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+	if (ret)
+		return ret;
+
+	if (enabled)
+		/* enable alarm1 interrupt */
+		control |= DS3232_REG_CR_A1IE;
+	else
+		/* disable alarm1 interrupt */
+		control &= ~(DS3232_REG_CR_A1IE);
+	ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+
+	return ret;
+}
+
+/*
+ * Temperature sensor support for ds3232/ds3234 devices.
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3232_hwmon_read_temp(struct device *dev, long int *mC)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	u8 temp_buf[2];
+	s16 temp;
+	int ret;
+
+	ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_TEMPERATURE, temp_buf,
+			       sizeof(temp_buf));
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Temperature is represented as a 10-bit code with a resolution of
+	 * 0.25 degree celsius and encoded in two's complement format.
+	 */
+	temp = (temp_buf[0] << 8) | temp_buf[1];
+	temp >>= 6;
+	*mC = temp * 250;
+
+	return 0;
+}
+
+static umode_t ds3232_hwmon_is_visible(const void *data,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int ds3232_hwmon_read(struct device *dev,
+			     enum hwmon_sensor_types type,
+			     u32 attr, int channel, long *temp)
+{
+	int err;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		err = ds3232_hwmon_read_temp(dev, temp);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	return err;
+}
+
+static u32 ds3232_hwmon_chip_config[] = {
+	HWMON_C_REGISTER_TZ,
+	0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_chip = {
+	.type = hwmon_chip,
+	.config = ds3232_hwmon_chip_config,
+};
+
+static u32 ds3232_hwmon_temp_config[] = {
+	HWMON_T_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_temp = {
+	.type = hwmon_temp,
+	.config = ds3232_hwmon_temp_config,
+};
+
+static const struct hwmon_channel_info *ds3232_hwmon_info[] = {
+	&ds3232_hwmon_chip,
+	&ds3232_hwmon_temp,
+	NULL
+};
+
+static const struct hwmon_ops ds3232_hwmon_hwmon_ops = {
+	.is_visible = ds3232_hwmon_is_visible,
+	.read = ds3232_hwmon_read,
+};
+
+static const struct hwmon_chip_info ds3232_hwmon_chip_info = {
+	.ops = &ds3232_hwmon_hwmon_ops,
+	.info = ds3232_hwmon_info,
+};
+
+static void ds3232_hwmon_register(struct device *dev, const char *name)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	struct device *hwmon_dev;
+
+	if (!IS_ENABLED(CONFIG_RTC_DRV_DS3232_HWMON))
+		return;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, name, ds3232,
+							&ds3232_hwmon_chip_info,
+							NULL);
+	if (IS_ERR(hwmon_dev)) {
+		dev_err(dev, "unable to register hwmon device %ld\n",
+			PTR_ERR(hwmon_dev));
+	}
+}
+
+static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (ds3232->irq <= 0)
+		return -EINVAL;
+
+	return ds3232_update_alarm(dev, enabled);
+}
+
+static irqreturn_t ds3232_irq(int irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+	int ret;
+	int stat, control;
+
+	rtc_lock(ds3232->rtc);
+
+	ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+	if (ret)
+		goto unlock;
+
+	if (stat & DS3232_REG_SR_A1F) {
+		ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+		if (ret) {
+			dev_warn(ds3232->dev,
+				 "Read Control Register error %d\n", ret);
+		} else {
+			/* disable alarm1 interrupt */
+			control &= ~(DS3232_REG_CR_A1IE);
+			ret = regmap_write(ds3232->regmap, DS3232_REG_CR,
+					   control);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Control Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			/* clear the alarm pend flag */
+			stat &= ~DS3232_REG_SR_A1F;
+			ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+			if (ret) {
+				dev_warn(ds3232->dev,
+					 "Write Status Register error %d\n",
+					 ret);
+				goto unlock;
+			}
+
+			rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
+		}
+	}
+
+unlock:
+	rtc_unlock(ds3232->rtc);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ds3232_rtc_ops = {
+	.read_time = ds3232_read_time,
+	.set_time = ds3232_set_time,
+	.read_alarm = ds3232_read_alarm,
+	.set_alarm = ds3232_set_alarm,
+	.alarm_irq_enable = ds3232_alarm_irq_enable,
+};
+
+static int ds3232_nvmem_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct regmap *ds3232_regmap = (struct regmap *)priv;
+
+	return regmap_bulk_read(ds3232_regmap, DS3232_REG_SRAM_START + offset,
+				val, bytes);
+}
+
+static int ds3232_nvmem_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	struct regmap *ds3232_regmap = (struct regmap *)priv;
+
+	return regmap_bulk_write(ds3232_regmap, DS3232_REG_SRAM_START + offset,
+				 val, bytes);
+}
+
+static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
+			const char *name)
+{
+	struct ds3232 *ds3232;
+	int ret;
+	struct nvmem_config nvmem_cfg = {
+		.name = "ds3232_sram",
+		.stride = 1,
+		.size = DS3232_REG_SRAM_SIZE,
+		.word_size = 1,
+		.reg_read = ds3232_nvmem_read,
+		.reg_write = ds3232_nvmem_write,
+		.priv = regmap,
+		.type = NVMEM_TYPE_BATTERY_BACKED
+	};
+
+	ds3232 = devm_kzalloc(dev, sizeof(*ds3232), GFP_KERNEL);
+	if (!ds3232)
+		return -ENOMEM;
+
+	ds3232->regmap = regmap;
+	ds3232->irq = irq;
+	ds3232->dev = dev;
+	dev_set_drvdata(dev, ds3232);
+
+	ret = ds3232_check_rtc_status(dev);
+	if (ret)
+		return ret;
+
+	if (ds3232->irq > 0)
+		device_init_wakeup(dev, 1);
+
+	ds3232_hwmon_register(dev, name);
+
+	ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops,
+						THIS_MODULE);
+	if (IS_ERR(ds3232->rtc))
+		return PTR_ERR(ds3232->rtc);
+
+	ret = devm_rtc_nvmem_register(ds3232->rtc, &nvmem_cfg);
+	if(ret)
+		return ret;
+
+	if (ds3232->irq > 0) {
+		ret = devm_request_threaded_irq(dev, ds3232->irq, NULL,
+						ds3232_irq,
+						IRQF_SHARED | IRQF_ONESHOT,
+						name, dev);
+		if (ret) {
+			device_set_wakeup_capable(dev, 0);
+			ds3232->irq = 0;
+			dev_err(dev, "unable to request IRQ\n");
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ds3232_suspend(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (enable_irq_wake(ds3232->irq))
+			dev_warn_once(dev, "Cannot set wakeup source\n");
+	}
+
+	return 0;
+}
+
+static int ds3232_resume(struct device *dev)
+{
+	struct ds3232 *ds3232 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ds3232->irq);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops ds3232_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume)
+};
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int ds3232_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = DS3232_REG_SRAM_END,
+	};
+
+	regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return ds3232_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static const struct i2c_device_id ds3232_id[] = {
+	{ "ds3232", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds3232_id);
+
+static const  __maybe_unused struct of_device_id ds3232_of_match[] = {
+	{ .compatible = "dallas,ds3232" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds3232_of_match);
+
+static struct i2c_driver ds3232_driver = {
+	.driver = {
+		.name = "rtc-ds3232",
+		.of_match_table = of_match_ptr(ds3232_of_match),
+		.pm	= &ds3232_pm_ops,
+	},
+	.probe_new = ds3232_i2c_probe,
+	.id_table = ds3232_id,
+};
+
+static int ds3232_register_driver(void)
+{
+	return i2c_add_driver(&ds3232_driver);
+}
+
+static void ds3232_unregister_driver(void)
+{
+	i2c_del_driver(&ds3232_driver);
+}
+
+#else
+
+static int ds3232_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3232_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ds3234_probe(struct spi_device *spi)
+{
+	int res;
+	unsigned int tmp;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = DS3232_REG_SRAM_END,
+		.write_flag_mask = 0x80,
+	};
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+			__func__, PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = regmap_read(regmap, DS3232_REG_SECONDS, &tmp);
+	if (res)
+		return res;
+
+	/* Control settings
+	 *
+	 * CONTROL_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     EOSC	BBSQW	CONV	RS2	RS1	INTCN	A2IE	A1IE
+	 *
+	 *     0	0	0	1	1	1	0	0
+	 *
+	 * CONTROL_STAT_REG
+	 * BIT 7	6	5	4	3	2	1	0
+	 *     OSF	BB32kHz	CRATE1	CRATE0	EN32kHz	BSY	A2F	A1F
+	 *
+	 *     1	0	0	0	1	0	0	0
+	 */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_CR, tmp & 0x1c);
+	if (res)
+		return res;
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	res = regmap_write(regmap, DS3232_REG_SR, tmp & 0x88);
+	if (res)
+		return res;
+
+	/* Print our settings */
+	res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
+
+	res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+	if (res)
+		return res;
+	dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
+
+	return ds3232_probe(&spi->dev, regmap, spi->irq, "ds3234");
+}
+
+static struct spi_driver ds3234_driver = {
+	.driver = {
+		.name	 = "ds3234",
+	},
+	.probe	 = ds3234_probe,
+};
+
+static int ds3234_register_driver(void)
+{
+	return spi_register_driver(&ds3234_driver);
+}
+
+static void ds3234_unregister_driver(void)
+{
+	spi_unregister_driver(&ds3234_driver);
+}
+
+#else
+
+static int ds3234_register_driver(void)
+{
+	return 0;
+}
+
+static void ds3234_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init ds323x_init(void)
+{
+	int ret;
+
+	ret = ds3232_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3232 driver: %d\n", ret);
+		return ret;
+	}
+
+	ret = ds3234_register_driver();
+	if (ret) {
+		pr_err("Failed to register ds3234 driver: %d\n", ret);
+		ds3232_unregister_driver();
+	}
+
+	return ret;
+}
+module_init(ds323x_init)
+
+static void __exit ds323x_exit(void)
+{
+	ds3234_unregister_driver();
+	ds3232_unregister_driver();
+}
+module_exit(ds323x_exit)
+
+MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
+MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS3232/DS3234 RTC Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ds3234");