Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 456 insertions, 0 deletions

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
new file mode 100644
index 000000000..660498252
--- /dev/null
+++ b/drivers/soc/renesas/Kconfig
@@ -0,0 +1,456 @@
+# SPDX-License-Identifier: GPL-2.0
+menuconfig SOC_RENESAS
+	bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
+	default y if ARCH_RENESAS
+	select GPIOLIB
+	select PINCTRL
+	select SOC_BUS
+
+if SOC_RENESAS
+
+config ARCH_RCAR_GEN1
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_INTC_IRQPIN
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RCAR_GEN2
+	bool
+	select HAVE_ARM_ARCH_TIMER
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_IRQC
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_CMT
+
+config ARCH_RCAR_GEN3
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_IRQC
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RMOBILE
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
+	select SYSC_RMOBILE
+
+config ARCH_RZG2L
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_RZG2L_IRQC
+
+config ARCH_RZN1
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select ARM_AMBA
+
+if ARM && ARCH_RENESAS
+
+#comment "Renesas ARM SoCs System Type"
+
+config ARCH_EMEV2
+	bool "ARM32 Platform support for Emma Mobile EV2"
+	select HAVE_ARM_SCU if SMP
+	select SYS_SUPPORTS_EM_STI
+
+config ARCH_R8A7794
+	bool "ARM32 Platform support for R-Car E2"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_814220
+	select SYSC_R8A7794
+
+config ARCH_R8A7779
+	bool "ARM32 Platform support for R-Car H1"
+	select ARCH_RCAR_GEN1
+	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select SYSC_R8A7779
+
+config ARCH_R8A7790
+	bool "ARM32 Platform support for R-Car H2"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select ARM_ERRATA_814220
+	select I2C
+	select SYSC_R8A7790
+
+config ARCH_R8A7778
+	bool "ARM32 Platform support for R-Car M1A"
+	select ARCH_RCAR_GEN1
+	select ARM_ERRATA_754322
+
+config ARCH_R8A7793
+	bool "ARM32 Platform support for R-Car M2-N"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select I2C
+	select SYSC_R8A7791
+
+config ARCH_R8A7791
+	bool "ARM32 Platform support for R-Car M2-W"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select I2C
+	select SYSC_R8A7791
+
+config ARCH_R8A7792
+	bool "ARM32 Platform support for R-Car V2H"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7792
+
+config ARCH_R8A7740
+	bool "ARM32 Platform support for R-Mobile A1"
+	select ARCH_RMOBILE
+	select ARM_ERRATA_754322
+	select RENESAS_INTC_IRQPIN
+
+config ARCH_R8A73A4
+	bool "ARM32 Platform support for R-Mobile APE6"
+	select ARCH_RMOBILE
+	select ARM_ERRATA_798181 if SMP
+	select ARM_ERRATA_814220
+	select HAVE_ARM_ARCH_TIMER
+	select RENESAS_IRQC
+
+config ARCH_R7S72100
+	bool "ARM32 Platform support for RZ/A1H"
+	select ARM_ERRATA_754322
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_OSTM
+	select RENESAS_RZA1_IRQC
+	select SYS_SUPPORTS_SH_MTU2
+
+config ARCH_R7S9210
+	bool "ARM32 Platform support for RZ/A2"
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_OSTM
+	select RENESAS_RZA1_IRQC
+
+config ARCH_R8A77470
+	bool "ARM32 Platform support for RZ/G1C"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_814220
+	select SYSC_R8A77470
+
+config ARCH_R8A7745
+	bool "ARM32 Platform support for RZ/G1E"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_814220
+	select SYSC_R8A7745
+
+config ARCH_R8A7742
+	bool "ARM32 Platform support for RZ/G1H"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select ARM_ERRATA_814220
+	select SYSC_R8A7742
+
+config ARCH_R8A7743
+	bool "ARM32 Platform support for RZ/G1M"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7743
+
+config ARCH_R8A7744
+	bool "ARM32 Platform support for RZ/G1N"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7743
+
+config ARCH_R9A06G032
+	bool "ARM32 Platform support for RZ/N1D"
+	select ARCH_RZN1
+	select ARM_ERRATA_814220
+
+config ARCH_SH73A0
+	bool "ARM32 Platform support for SH-Mobile AG5"
+	select ARCH_RMOBILE
+	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select RENESAS_INTC_IRQPIN
+
+endif # ARM
+
+if ARM64
+
+config ARCH_R8A77995
+	bool "ARM64 Platform support for R-Car D3"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77995
+	help
+	  This enables support for the Renesas R-Car D3 SoC.
+	  This includes different gradings like R-Car D3e.
+
+config ARCH_R8A77990
+	bool "ARM64 Platform support for R-Car E3"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77990
+	help
+	  This enables support for the Renesas R-Car E3 SoC.
+	  This includes different gradings like R-Car E3e.
+
+config ARCH_R8A77950
+	bool "ARM64 Platform support for R-Car H3 ES1.x"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A7795
+	help
+	  This enables support for the Renesas R-Car H3 SoC (revision 1.x).
+
+config ARCH_R8A77951
+	bool "ARM64 Platform support for R-Car H3 ES2.0+"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A7795
+	help
+	  This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
+	  later).
+	  This includes different gradings like R-Car H3e, H3e-2G, and H3Ne.
+
+config ARCH_R8A77965
+	bool "ARM64 Platform support for R-Car M3-N"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77965
+	help
+	  This enables support for the Renesas R-Car M3-N SoC.
+	  This includes different gradings like R-Car M3Ne and M3Ne-2G.
+
+config ARCH_R8A77960
+	bool "ARM64 Platform support for R-Car M3-W"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77960
+	help
+	  This enables support for the Renesas R-Car M3-W SoC.
+
+config ARCH_R8A77961
+	bool "ARM64 Platform support for R-Car M3-W+"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77961
+	help
+	  This enables support for the Renesas R-Car M3-W+ SoC.
+	  This includes different gradings like R-Car M3e and M3e-2G.
+
+config ARCH_R8A779F0
+	bool "ARM64 Platform support for R-Car S4-8"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A779F0
+	help
+	  This enables support for the Renesas R-Car S4-8 SoC.
+
+config ARCH_R8A77980
+	bool "ARM64 Platform support for R-Car V3H"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77980
+	help
+	  This enables support for the Renesas R-Car V3H SoC.
+
+config ARCH_R8A77970
+	bool "ARM64 Platform support for R-Car V3M"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77970
+	help
+	  This enables support for the Renesas R-Car V3M SoC.
+
+config ARCH_R8A779A0
+	bool "ARM64 Platform support for R-Car V3U"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A779A0
+	help
+	  This enables support for the Renesas R-Car V3U SoC.
+
+config ARCH_R8A779G0
+	bool "ARM64 Platform support for R-Car V4H"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A779G0
+	help
+	  This enables support for the Renesas R-Car V4H SoC.
+
+config ARCH_R8A774C0
+	bool "ARM64 Platform support for RZ/G2E"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774C0
+	help
+	  This enables support for the Renesas RZ/G2E SoC.
+
+config ARCH_R8A774E1
+	bool "ARM64 Platform support for RZ/G2H"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774E1
+	help
+	  This enables support for the Renesas RZ/G2H SoC.
+
+config ARCH_R8A774A1
+	bool "ARM64 Platform support for RZ/G2M"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774A1
+	help
+	  This enables support for the Renesas RZ/G2M SoC.
+
+config ARCH_R8A774B1
+	bool "ARM64 Platform support for RZ/G2N"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774B1
+	help
+	  This enables support for the Renesas RZ/G2N SoC.
+
+config ARCH_R9A07G043
+	bool "ARM64 Platform support for RZ/G2UL"
+	select ARCH_RZG2L
+	help
+	  This enables support for the Renesas RZ/G2UL SoC variants.
+
+config ARCH_R9A07G044
+	bool "ARM64 Platform support for RZ/G2L"
+	select ARCH_RZG2L
+	help
+	  This enables support for the Renesas RZ/G2L SoC variants.
+
+config ARCH_R9A07G054
+	bool "ARM64 Platform support for RZ/V2L"
+	select ARCH_RZG2L
+	help
+	  This enables support for the Renesas RZ/V2L SoC variants.
+
+config ARCH_R9A09G011
+	bool "ARM64 Platform support for RZ/V2M"
+	select PM
+	select PM_GENERIC_DOMAINS
+	help
+	  This enables support for the Renesas RZ/V2M SoC.
+
+endif # ARM64
+
+if RISCV
+
+config ARCH_R9A07G043
+	bool "RISC-V Platform support for RZ/Five"
+	select ARCH_RZG2L
+	help
+	  This enables support for the Renesas RZ/Five SoC.
+
+endif # RISCV
+
+config RST_RCAR
+	bool "Reset Controller support for R-Car" if COMPILE_TEST
+
+config SYSC_RCAR
+	bool "System Controller support for R-Car" if COMPILE_TEST
+
+config SYSC_RCAR_GEN4
+	bool "System Controller support for R-Car Gen4" if COMPILE_TEST
+
+config SYSC_R8A77995
+	bool "System Controller support for R-Car D3" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7794
+	bool "System Controller support for R-Car E2" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77990
+	bool "System Controller support for R-Car E3" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7779
+	bool "System Controller support for R-Car H1" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7790
+	bool "System Controller support for R-Car H2" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7795
+	bool "System Controller support for R-Car H3" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7791
+	bool "System Controller support for R-Car M2-W/N" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77965
+	bool "System Controller support for R-Car M3-N" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77960
+	bool "System Controller support for R-Car M3-W" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77961
+	bool "System Controller support for R-Car M3-W+" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A779F0
+	bool "System Controller support for R-Car S4-8" if COMPILE_TEST
+	select SYSC_RCAR_GEN4
+
+config SYSC_R8A7792
+	bool "System Controller support for R-Car V2H" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77980
+	bool "System Controller support for R-Car V3H" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A77970
+	bool "System Controller support for R-Car V3M" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A779A0
+	bool "System Controller support for R-Car V3U" if COMPILE_TEST
+	select SYSC_RCAR_GEN4
+
+config SYSC_R8A779G0
+	bool "System Controller support for R-Car V4H" if COMPILE_TEST
+	select SYSC_RCAR_GEN4
+
+config SYSC_RMOBILE
+	bool "System Controller support for R-Mobile" if COMPILE_TEST
+
+config SYSC_R8A77470
+	bool "System Controller support for RZ/G1C" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7745
+	bool "System Controller support for RZ/G1E" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7742
+	bool "System Controller support for RZ/G1H" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7743
+	bool "System Controller support for RZ/G1M" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A774C0
+	bool "System Controller support for RZ/G2E" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A774E1
+	bool "System Controller support for RZ/G2H" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A774A1
+	bool "System Controller support for RZ/G2M" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A774B1
+	bool "System Controller support for RZ/G2N" if COMPILE_TEST
+	select SYSC_RCAR
+
+endif # SOC_RENESAS