Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 464 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
new file mode 100644
index 000000000..e2aa2a1a0
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Probe for F81216A LPC to 4 UART
+ *
+ *  Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/kernel.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include  "8250.h"
+
+#define ADDR_PORT 0
+#define DATA_PORT 1
+#define EXIT_KEY 0xAA
+#define CHIP_ID1  0x20
+#define CHIP_ID2  0x21
+#define CHIP_ID_F81865 0x0407
+#define CHIP_ID_F81866 0x1010
+#define CHIP_ID_F81966 0x0215
+#define CHIP_ID_F81216AD 0x1602
+#define CHIP_ID_F81216H 0x0501
+#define CHIP_ID_F81216 0x0802
+#define VENDOR_ID1 0x23
+#define VENDOR_ID1_VAL 0x19
+#define VENDOR_ID2 0x24
+#define VENDOR_ID2_VAL 0x34
+#define IO_ADDR1 0x61
+#define IO_ADDR2 0x60
+#define LDN 0x7
+
+#define FINTEK_IRQ_MODE	0x70
+#define IRQ_SHARE	BIT(4)
+#define IRQ_MODE_MASK	(BIT(6) | BIT(5))
+#define IRQ_LEVEL_LOW	0
+#define IRQ_EDGE_HIGH	BIT(5)
+
+/*
+ * F81216H clock source register, the value and mask is the same with F81866,
+ * but it's on F0h.
+ *
+ * Clock speeds for UART (register F0h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
+ */
+#define RS485  0xF0
+#define RTS_INVERT BIT(5)
+#define RS485_URA BIT(4)
+#define RXW4C_IRA BIT(3)
+#define TXW4C_IRA BIT(2)
+
+#define FIFO_CTRL		0xF6
+#define FIFO_MODE_MASK		(BIT(1) | BIT(0))
+#define FIFO_MODE_128		(BIT(1) | BIT(0))
+#define RXFTHR_MODE_MASK	(BIT(5) | BIT(4))
+#define RXFTHR_MODE_4X		BIT(5)
+
+#define F81216_LDN_LOW	0x0
+#define F81216_LDN_HIGH	0x4
+
+/*
+ * F81866/966 registers
+ *
+ * The IRQ setting mode of F81866/966 is not the same with F81216 series.
+ *	Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
+ *	Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ *
+ * Clock speeds for UART (register F2h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
+ */
+#define F81866_IRQ_MODE		0xf0
+#define F81866_IRQ_SHARE	BIT(0)
+#define F81866_IRQ_MODE0	BIT(1)
+
+#define F81866_FIFO_CTRL	FIFO_CTRL
+#define F81866_IRQ_MODE1	BIT(3)
+
+#define F81866_LDN_LOW		0x10
+#define F81866_LDN_HIGH		0x16
+
+#define F81866_UART_CLK 0xF2
+#define F81866_UART_CLK_MASK (BIT(1) | BIT(0))
+#define F81866_UART_CLK_1_8432MHZ 0
+#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0))
+#define F81866_UART_CLK_18_432MHZ BIT(0)
+#define F81866_UART_CLK_24MHZ BIT(1)
+
+struct fintek_8250 {
+	u16 pid;
+	u16 base_port;
+	u8 index;
+	u8 key;
+};
+
+static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg)
+{
+	outb(reg, pdata->base_port + ADDR_PORT);
+	return inb(pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_reg(struct fintek_8250 *pdata, u8 reg, u8 data)
+{
+	outb(reg, pdata->base_port + ADDR_PORT);
+	outb(data, pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_mask_reg(struct fintek_8250 *pdata, u8 reg, u8 mask,
+			       u8 data)
+{
+	u8 tmp;
+
+	tmp = (sio_read_reg(pdata, reg) & ~mask) | (mask & data);
+	sio_write_reg(pdata, reg, tmp);
+}
+
+static int fintek_8250_enter_key(u16 base_port, u8 key)
+{
+	if (!request_muxed_region(base_port, 2, "8250_fintek"))
+		return -EBUSY;
+
+	/* Force to deactive all SuperIO in this base_port */
+	outb(EXIT_KEY, base_port + ADDR_PORT);
+
+	outb(key, base_port + ADDR_PORT);
+	outb(key, base_port + ADDR_PORT);
+	return 0;
+}
+
+static void fintek_8250_exit_key(u16 base_port)
+{
+
+	outb(EXIT_KEY, base_port + ADDR_PORT);
+	release_region(base_port + ADDR_PORT, 2);
+}
+
+static int fintek_8250_check_id(struct fintek_8250 *pdata)
+{
+	u16 chip;
+
+	if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL)
+		return -ENODEV;
+
+	if (sio_read_reg(pdata, VENDOR_ID2) != VENDOR_ID2_VAL)
+		return -ENODEV;
+
+	chip = sio_read_reg(pdata, CHIP_ID1);
+	chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
+
+	switch (chip) {
+	case CHIP_ID_F81865:
+	case CHIP_ID_F81866:
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	pdata->pid = chip;
+	return 0;
+}
+
+static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
+				     int *max)
+{
+	switch (pdata->pid) {
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81865:
+	case CHIP_ID_F81866:
+		*min = F81866_LDN_LOW;
+		*max = F81866_LDN_HIGH;
+		return 0;
+
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		*min = F81216_LDN_LOW;
+		*max = F81216_LDN_HIGH;
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int fintek_8250_rs485_config(struct uart_port *port, struct ktermios *termios,
+			      struct serial_rs485 *rs485)
+{
+	uint8_t config = 0;
+	struct fintek_8250 *pdata = port->private_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+
+	if (rs485->flags & SER_RS485_ENABLED) {
+		/* Hardware do not support same RTS level on send and receive */
+		if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+		    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
+			return -EINVAL;
+		config |= RS485_URA;
+	}
+
+	if (rs485->delay_rts_before_send) {
+		rs485->delay_rts_before_send = 1;
+		config |= TXW4C_IRA;
+	}
+
+	if (rs485->delay_rts_after_send) {
+		rs485->delay_rts_after_send = 1;
+		config |= RXW4C_IRA;
+	}
+
+	if (rs485->flags & SER_RS485_RTS_ON_SEND)
+		config |= RTS_INVERT;
+
+	if (fintek_8250_enter_key(pdata->base_port, pdata->key))
+		return -EBUSY;
+
+	sio_write_reg(pdata, LDN, pdata->index);
+	sio_write_reg(pdata, RS485, config);
+	fintek_8250_exit_key(pdata->base_port);
+
+	return 0;
+}
+
+static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
+{
+	sio_write_reg(pdata, LDN, pdata->index);
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81866:
+		sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
+				   0);
+		fallthrough;
+	case CHIP_ID_F81865:
+		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
+				   F81866_IRQ_SHARE);
+		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_MODE0,
+				   is_level ? 0 : F81866_IRQ_MODE0);
+		break;
+
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81216:
+		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
+				   IRQ_SHARE);
+		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
+				   is_level ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
+		break;
+	}
+}
+
+static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
+{
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H: /* 128Bytes FIFO */
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81866:
+		sio_write_mask_reg(pdata, FIFO_CTRL,
+				   FIFO_MODE_MASK | RXFTHR_MODE_MASK,
+				   FIFO_MODE_128 | RXFTHR_MODE_4X);
+		break;
+
+	default: /* Default 16Bytes FIFO */
+		break;
+	}
+}
+
+static void fintek_8250_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    const struct ktermios *old)
+{
+	struct fintek_8250 *pdata = port->private_data;
+	unsigned int baud = tty_termios_baud_rate(termios);
+	int i;
+	u8 reg;
+	static u32 baudrate_table[] = {115200, 921600, 1152000, 1500000};
+	static u8 clock_table[] = { F81866_UART_CLK_1_8432MHZ,
+			F81866_UART_CLK_14_769MHZ, F81866_UART_CLK_18_432MHZ,
+			F81866_UART_CLK_24MHZ };
+
+	/*
+	 * We'll use serial8250_do_set_termios() for baud = 0, otherwise It'll
+	 * crash on baudrate_table[i] % baud with "division by zero".
+	 */
+	if (!baud)
+		goto exit;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H:
+		reg = RS485;
+		break;
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81866:
+		reg = F81866_UART_CLK;
+		break;
+	default:
+		/* Don't change clocksource with unknown PID */
+		dev_warn(port->dev,
+			"%s: pid: %x Not support. use default set_termios.\n",
+			__func__, pdata->pid);
+		goto exit;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+		if (baud > baudrate_table[i] || baudrate_table[i] % baud != 0)
+			continue;
+
+		if (port->uartclk == baudrate_table[i] * 16)
+			break;
+
+		if (fintek_8250_enter_key(pdata->base_port, pdata->key))
+			continue;
+
+		port->uartclk = baudrate_table[i] * 16;
+
+		sio_write_reg(pdata, LDN, pdata->index);
+		sio_write_mask_reg(pdata, reg, F81866_UART_CLK_MASK,
+				clock_table[i]);
+
+		fintek_8250_exit_key(pdata->base_port);
+		break;
+	}
+
+	if (i == ARRAY_SIZE(baudrate_table)) {
+		baud = tty_termios_baud_rate(old);
+		tty_termios_encode_baud_rate(termios, baud, baud);
+	}
+
+exit:
+	serial8250_do_set_termios(port, termios, old);
+}
+
+static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
+{
+	struct fintek_8250 *pdata = uart->port.private_data;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81866:
+		uart->port.set_termios = fintek_8250_set_termios;
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata,
+					struct uart_8250_port *uart)
+{
+	static const u16 addr[] = {0x4e, 0x2e};
+	static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
+	struct irq_data *irq_data;
+	bool level_mode = false;
+	int i, j, k, min, max;
+
+	for (i = 0; i < ARRAY_SIZE(addr); i++) {
+		for (j = 0; j < ARRAY_SIZE(keys); j++) {
+			pdata->base_port = addr[i];
+			pdata->key = keys[j];
+
+			if (fintek_8250_enter_key(addr[i], keys[j]))
+				continue;
+			if (fintek_8250_check_id(pdata) ||
+			    fintek_8250_get_ldn_range(pdata, &min, &max)) {
+				fintek_8250_exit_key(addr[i]);
+				continue;
+			}
+
+			for (k = min; k < max; k++) {
+				u16 aux;
+
+				sio_write_reg(pdata, LDN, k);
+				aux = sio_read_reg(pdata, IO_ADDR1);
+				aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
+				if (aux != uart->port.iobase)
+					continue;
+
+				pdata->index = k;
+
+				irq_data = irq_get_irq_data(uart->port.irq);
+				if (irq_data)
+					level_mode =
+						irqd_is_level_type(irq_data);
+
+				fintek_8250_set_irq_mode(pdata, level_mode);
+				fintek_8250_set_max_fifo(pdata);
+
+				fintek_8250_exit_key(addr[i]);
+
+				return 0;
+			}
+
+			fintek_8250_exit_key(addr[i]);
+		}
+	}
+
+	return -ENODEV;
+}
+
+/* Only the first port supports delays */
+static const struct serial_rs485 fintek_8250_rs485_supported_port0 = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
+static const struct serial_rs485 fintek_8250_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+};
+
+static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
+{
+	struct fintek_8250 *pdata = uart->port.private_data;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81966:
+	case CHIP_ID_F81866:
+	case CHIP_ID_F81865:
+		uart->port.rs485_config = fintek_8250_rs485_config;
+		if (!pdata->index)
+			uart->port.rs485_supported = fintek_8250_rs485_supported_port0;
+		else
+			uart->port.rs485_supported = fintek_8250_rs485_supported;
+		break;
+
+	default: /* No RS485 Auto direction functional */
+		break;
+	}
+}
+
+int fintek_8250_probe(struct uart_8250_port *uart)
+{
+	struct fintek_8250 *pdata;
+	struct fintek_8250 probe_data;
+
+	if (probe_setup_port(&probe_data, uart))
+		return -ENODEV;
+
+	pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	memcpy(pdata, &probe_data, sizeof(probe_data));
+	uart->port.private_data = pdata;
+	fintek_8250_set_rs485_handler(uart);
+	fintek_8250_set_termios_handler(uart);
+
+	return 0;
+}