Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 401 insertions, 0 deletions

diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
new file mode 100644
index 000000000..5739ff007
--- /dev/null
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Universal Flash Storage Host controller Platform bus based glue driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+
+#include <ufs/ufshcd.h>
+#include "ufshcd-pltfrm.h"
+#include <ufs/unipro.h>
+
+#define UFSHCD_DEFAULT_LANES_PER_DIRECTION		2
+
+static int ufshcd_parse_clock_info(struct ufs_hba *hba)
+{
+	int ret = 0;
+	int cnt;
+	int i;
+	struct device *dev = hba->dev;
+	struct device_node *np = dev->of_node;
+	const char *name;
+	u32 *clkfreq = NULL;
+	struct ufs_clk_info *clki;
+	int len = 0;
+	size_t sz = 0;
+
+	if (!np)
+		goto out;
+
+	cnt = of_property_count_strings(np, "clock-names");
+	if (!cnt || (cnt == -EINVAL)) {
+		dev_info(dev, "%s: Unable to find clocks, assuming enabled\n",
+				__func__);
+	} else if (cnt < 0) {
+		dev_err(dev, "%s: count clock strings failed, err %d\n",
+				__func__, cnt);
+		ret = cnt;
+	}
+
+	if (cnt <= 0)
+		goto out;
+
+	if (!of_get_property(np, "freq-table-hz", &len)) {
+		dev_info(dev, "freq-table-hz property not specified\n");
+		goto out;
+	}
+
+	if (len <= 0)
+		goto out;
+
+	sz = len / sizeof(*clkfreq);
+	if (sz != 2 * cnt) {
+		dev_err(dev, "%s len mismatch\n", "freq-table-hz");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	clkfreq = devm_kcalloc(dev, sz, sizeof(*clkfreq),
+			       GFP_KERNEL);
+	if (!clkfreq) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_property_read_u32_array(np, "freq-table-hz",
+			clkfreq, sz);
+	if (ret && (ret != -EINVAL)) {
+		dev_err(dev, "%s: error reading array %d\n",
+				"freq-table-hz", ret);
+		return ret;
+	}
+
+	for (i = 0; i < sz; i += 2) {
+		ret = of_property_read_string_index(np,	"clock-names", i/2,
+						    &name);
+		if (ret)
+			goto out;
+
+		clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
+		if (!clki) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		clki->min_freq = clkfreq[i];
+		clki->max_freq = clkfreq[i+1];
+		clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
+		if (!clki->name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		if (!strcmp(name, "ref_clk"))
+			clki->keep_link_active = true;
+		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
+				clki->min_freq, clki->max_freq, clki->name);
+		list_add_tail(&clki->list, &hba->clk_list_head);
+	}
+out:
+	return ret;
+}
+
+static bool phandle_exists(const struct device_node *np,
+			   const char *phandle_name, int index)
+{
+	struct device_node *parse_np = of_parse_phandle(np, phandle_name, index);
+
+	if (parse_np)
+		of_node_put(parse_np);
+
+	return parse_np != NULL;
+}
+
+#define MAX_PROP_SIZE 32
+int ufshcd_populate_vreg(struct device *dev, const char *name,
+			 struct ufs_vreg **out_vreg)
+{
+	char prop_name[MAX_PROP_SIZE];
+	struct ufs_vreg *vreg = NULL;
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "%s: non DT initialization\n", __func__);
+		goto out;
+	}
+
+	snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
+	if (!phandle_exists(np, prop_name, 0)) {
+		dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
+				__func__, prop_name);
+		goto out;
+	}
+
+	vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+	if (!vreg)
+		return -ENOMEM;
+
+	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
+	if (!vreg->name)
+		return -ENOMEM;
+
+	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
+	if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
+		dev_info(dev, "%s: unable to find %s\n", __func__, prop_name);
+		vreg->max_uA = 0;
+	}
+out:
+	*out_vreg = vreg;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_populate_vreg);
+
+/**
+ * ufshcd_parse_regulator_info - get regulator info from device tree
+ * @hba: per adapter instance
+ *
+ * Get regulator info from device tree for vcc, vccq, vccq2 power supplies.
+ * If any of the supplies are not defined it is assumed that they are always-on
+ * and hence return zero. If the property is defined but parsing is failed
+ * then return corresponding error.
+ */
+static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
+{
+	int err;
+	struct device *dev = hba->dev;
+	struct ufs_vreg_info *info = &hba->vreg_info;
+
+	err = ufshcd_populate_vreg(dev, "vdd-hba", &info->vdd_hba);
+	if (err)
+		goto out;
+
+	err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
+	if (err)
+		goto out;
+
+	err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
+	if (err)
+		goto out;
+
+	err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
+out:
+	return err;
+}
+
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
+{
+	ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
+}
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
+
+static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
+{
+	struct device *dev = hba->dev;
+	int ret;
+
+	ret = of_property_read_u32(dev->of_node, "lanes-per-direction",
+		&hba->lanes_per_direction);
+	if (ret) {
+		dev_dbg(hba->dev,
+			"%s: failed to read lanes-per-direction, ret=%d\n",
+			__func__, ret);
+		hba->lanes_per_direction = UFSHCD_DEFAULT_LANES_PER_DIRECTION;
+	}
+}
+
+/**
+ * ufshcd_get_pwr_dev_param - get finally agreed attributes for
+ *                            power mode change
+ * @pltfrm_param: pointer to platform parameters
+ * @dev_max: pointer to device attributes
+ * @agreed_pwr: returned agreed attributes
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
+			     const struct ufs_pa_layer_attr *dev_max,
+			     struct ufs_pa_layer_attr *agreed_pwr)
+{
+	int min_pltfrm_gear;
+	int min_dev_gear;
+	bool is_dev_sup_hs = false;
+	bool is_pltfrm_max_hs = false;
+
+	if (dev_max->pwr_rx == FAST_MODE)
+		is_dev_sup_hs = true;
+
+	if (pltfrm_param->desired_working_mode == UFS_HS_MODE) {
+		is_pltfrm_max_hs = true;
+		min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear,
+					pltfrm_param->hs_tx_gear);
+	} else {
+		min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear,
+					pltfrm_param->pwm_tx_gear);
+	}
+
+	/*
+	 * device doesn't support HS but
+	 * pltfrm_param->desired_working_mode is HS,
+	 * thus device and pltfrm_param don't agree
+	 */
+	if (!is_dev_sup_hs && is_pltfrm_max_hs) {
+		pr_info("%s: device doesn't support HS\n",
+			__func__);
+		return -ENOTSUPP;
+	} else if (is_dev_sup_hs && is_pltfrm_max_hs) {
+		/*
+		 * since device supports HS, it supports FAST_MODE.
+		 * since pltfrm_param->desired_working_mode is also HS
+		 * then final decision (FAST/FASTAUTO) is done according
+		 * to pltfrm_params as it is the restricting factor
+		 */
+		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs;
+		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+	} else {
+		/*
+		 * here pltfrm_param->desired_working_mode is PWM.
+		 * it doesn't matter whether device supports HS or PWM,
+		 * in both cases pltfrm_param->desired_working_mode will
+		 * determine the mode
+		 */
+		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm;
+		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+	}
+
+	/*
+	 * we would like tx to work in the minimum number of lanes
+	 * between device capability and vendor preferences.
+	 * the same decision will be made for rx
+	 */
+	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+				    pltfrm_param->tx_lanes);
+	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+				    pltfrm_param->rx_lanes);
+
+	/* device maximum gear is the minimum between device rx and tx gears */
+	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+	/*
+	 * if both device capabilities and vendor pre-defined preferences are
+	 * both HS or both PWM then set the minimum gear to be the chosen
+	 * working gear.
+	 * if one is PWM and one is HS then the one that is PWM get to decide
+	 * what is the gear, as it is the one that also decided previously what
+	 * pwr the device will be configured to.
+	 */
+	if ((is_dev_sup_hs && is_pltfrm_max_hs) ||
+	    (!is_dev_sup_hs && !is_pltfrm_max_hs)) {
+		agreed_pwr->gear_rx =
+			min_t(u32, min_dev_gear, min_pltfrm_gear);
+	} else if (!is_dev_sup_hs) {
+		agreed_pwr->gear_rx = min_dev_gear;
+	} else {
+		agreed_pwr->gear_rx = min_pltfrm_gear;
+	}
+	agreed_pwr->gear_tx = agreed_pwr->gear_rx;
+
+	agreed_pwr->hs_rate = pltfrm_param->hs_rate;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param);
+
+void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param)
+{
+	*dev_param = (struct ufs_dev_params){
+		.tx_lanes = 2,
+		.rx_lanes = 2,
+		.hs_rx_gear = UFS_HS_G3,
+		.hs_tx_gear = UFS_HS_G3,
+		.pwm_rx_gear = UFS_PWM_G4,
+		.pwm_tx_gear = UFS_PWM_G4,
+		.rx_pwr_pwm = SLOW_MODE,
+		.tx_pwr_pwm = SLOW_MODE,
+		.rx_pwr_hs = FAST_MODE,
+		.tx_pwr_hs = FAST_MODE,
+		.hs_rate = PA_HS_MODE_B,
+		.desired_working_mode = UFS_HS_MODE,
+	};
+}
+EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param);
+
+/**
+ * ufshcd_pltfrm_init - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ * @vops: pointer to variant ops
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+		       const struct ufs_hba_variant_ops *vops)
+{
+	struct ufs_hba *hba;
+	void __iomem *mmio_base;
+	int irq, err;
+	struct device *dev = &pdev->dev;
+
+	mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mmio_base)) {
+		err = PTR_ERR(mmio_base);
+		goto out;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = irq;
+		goto out;
+	}
+
+	err = ufshcd_alloc_host(dev, &hba);
+	if (err) {
+		dev_err(dev, "Allocation failed\n");
+		goto out;
+	}
+
+	hba->vops = vops;
+
+	err = ufshcd_parse_clock_info(hba);
+	if (err) {
+		dev_err(dev, "%s: clock parse failed %d\n",
+				__func__, err);
+		goto dealloc_host;
+	}
+	err = ufshcd_parse_regulator_info(hba);
+	if (err) {
+		dev_err(dev, "%s: regulator init failed %d\n",
+				__func__, err);
+		goto dealloc_host;
+	}
+
+	ufshcd_init_lanes_per_dir(hba);
+
+	err = ufshcd_init(hba, mmio_base, irq);
+	if (err) {
+		dev_err(dev, "Initialization failed\n");
+		goto dealloc_host;
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+dealloc_host:
+	ufshcd_dealloc_host(hba);
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("UFS host controller Platform bus based glue driver");
+MODULE_LICENSE("GPL");