Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 625 insertions, 0 deletions

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 000000000..44a21ec86
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/usb/musb.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/of_platform.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	enum musb_vbus_id_status status;
+	struct work_struct	omap_musb_mailbox_work;
+	struct device		*control_otghs;
+	unsigned int		is_runtime_suspended:1;
+	unsigned int		needs_resume:1;
+	unsigned int		phy_suspended:1;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
+static struct omap2430_glue	*_glue;
+
+static inline void omap2430_low_level_exit(struct musb *musb)
+{
+	u32 l;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
+{
+	struct omap2430_glue	*glue = _glue;
+
+	if (!glue) {
+		pr_err("%s: musb core is not yet initialized\n", __func__);
+		return -EPROBE_DEFER;
+	}
+	glue->status = status;
+
+	if (!glue_to_musb(glue)) {
+		pr_err("%s: musb core is not yet ready\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	schedule_work(&glue->omap_musb_mailbox_work);
+
+	return 0;
+}
+
+/*
+ * HDRC controls CPEN, but beware current surges during device connect.
+ * They can trigger transient overcurrent conditions that must be ignored.
+ *
+ * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
+ * as set by musb_set_peripheral().
+ */
+static void omap_musb_set_mailbox(struct omap2430_glue *glue)
+{
+	struct musb *musb = glue_to_musb(glue);
+	int error;
+
+	pm_runtime_get_sync(musb->controller);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+		usb_otg_state_string(musb->xceiv->otg->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	switch (glue->status) {
+	case MUSB_ID_GROUND:
+		dev_dbg(musb->controller, "ID GND\n");
+		switch (musb->xceiv->otg->state) {
+		case OTG_STATE_A_IDLE:
+			error = musb_set_host(musb);
+			if (error)
+				break;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			fallthrough;
+		case OTG_STATE_A_WAIT_VRISE:
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_HOST:
+			/*
+			 * On multiple ID ground interrupts just keep enabling
+			 * VBUS. At least cpcap VBUS shuts down otherwise.
+			 */
+			otg_set_vbus(musb->xceiv->otg, 1);
+			break;
+		default:
+			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+			musb->xceiv->last_event = USB_EVENT_ID;
+			if (musb->gadget_driver) {
+				omap_control_usb_set_mode(glue->control_otghs,
+							  USB_MODE_HOST);
+				otg_set_vbus(musb->xceiv->otg, 1);
+			}
+			break;
+		}
+		break;
+
+	case MUSB_VBUS_VALID:
+		dev_dbg(musb->controller, "VBUS Connect\n");
+
+		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		musb->xceiv->last_event = USB_EVENT_VBUS;
+		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+		break;
+
+	case MUSB_ID_FLOAT:
+	case MUSB_VBUS_OFF:
+		dev_dbg(musb->controller, "VBUS Disconnect\n");
+
+		musb->xceiv->last_event = USB_EVENT_NONE;
+		musb_set_peripheral(musb);
+		otg_set_vbus(musb->xceiv->otg, 0);
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
+		break;
+	default:
+		dev_dbg(musb->controller, "ID float\n");
+	}
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	atomic_notifier_call_chain(&musb->xceiv->notifier,
+			musb->xceiv->last_event, NULL);
+}
+
+
+static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
+{
+	struct omap2430_glue *glue = container_of(mailbox_work,
+				struct omap2430_glue, omap_musb_mailbox_work);
+
+	omap_musb_set_mailbox(glue);
+}
+
+static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long   flags;
+	irqreturn_t     retval = IRQ_NONE;
+	struct musb     *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l;
+	int status = 0;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+	/* We can't totally remove musb->xceiv as of now because
+	 * musb core uses xceiv.state and xceiv.otg. Once we have
+	 * a separate state machine to handle otg, these can be moved
+	 * out of xceiv and then we can start using the generic PHY
+	 * framework
+	 */
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
+
+	if (IS_ERR(musb->xceiv)) {
+		status = PTR_ERR(musb->xceiv);
+
+		if (status == -ENXIO)
+			return status;
+
+		dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
+		return -EPROBE_DEFER;
+	}
+
+	if (IS_ERR(musb->phy)) {
+		dev_err(dev, "HS USB OTG: no PHY configured\n");
+		return PTR_ERR(musb->phy);
+	}
+	musb->isr = omap2430_musb_interrupt;
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
+
+	l = musb_readl(musb->mregs, OTG_INTERFSEL);
+
+	if (data->interface_type == MUSB_INTERFACE_UTMI) {
+		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
+		l &= ~ULPI_12PIN;       /* Disable ULPI */
+		l |= UTMI_8BIT;         /* Enable UTMI  */
+	} else {
+		l |= ULPI_12PIN;
+	}
+
+	musb_writel(musb->mregs, OTG_INTERFSEL, l);
+
+	dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			musb_readl(musb->mregs, OTG_REVISION),
+			musb_readl(musb->mregs, OTG_SYSCONFIG),
+			musb_readl(musb->mregs, OTG_SYSSTATUS),
+			musb_readl(musb->mregs, OTG_INTERFSEL),
+			musb_readl(musb->mregs, OTG_SIMENABLE));
+
+	return 0;
+}
+
+static void omap2430_musb_enable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status == MUSB_UNKNOWN)
+		glue->status = MUSB_VBUS_OFF;
+	omap_musb_set_mailbox(glue);
+}
+
+static void omap2430_musb_disable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status != MUSB_UNKNOWN)
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
+}
+
+static int omap2430_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	omap2430_low_level_exit(musb);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	musb->phy = NULL;
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
+
+	return 0;
+}
+
+static const struct musb_platform_ops omap2430_ops = {
+	.quirks		= MUSB_DMA_INVENTRA,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.enable		= omap2430_musb_enable,
+	.disable	= omap2430_musb_disable,
+
+	.phy_callback	= omap2430_musb_mailbox,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int omap2430_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct omap_musb_board_data	*data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	struct device_node		*np = pdev->dev.of_node;
+	struct musb_hdrc_config		*config;
+	struct device_node		*control_node;
+	struct platform_device		*control_pdev;
+	int				ret = -ENOMEM, val;
+	bool				populate_irqs = false;
+
+	if (!np)
+		return -ENODEV;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		goto err0;
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err0;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	/*
+	 * Legacy SoCs using omap_device get confused if node is moved
+	 * because of interconnect properties mixed into the node.
+	 */
+	if (of_get_property(np, "ti,hwmods", NULL)) {
+		dev_warn(&pdev->dev, "please update to probe with ti-sysc\n");
+		populate_irqs = true;
+	} else {
+		device_set_of_node_from_dev(&musb->dev, &pdev->dev);
+	}
+	of_node_put(np);
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->status			= MUSB_UNKNOWN;
+	glue->control_otghs = ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto err2;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto err2;
+
+	config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+	if (!config)
+		goto err2;
+
+	of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
+	of_property_read_u32(np, "interface-type",
+			(u32 *)&data->interface_type);
+	of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+	of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
+	of_property_read_u32(np, "power", (u32 *)&pdata->power);
+
+	ret = of_property_read_u32(np, "multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
+
+	pdata->board_data	= data;
+	pdata->config		= config;
+
+	control_node = of_parse_phandle(np, "ctrl-module", 0);
+	if (control_node) {
+		control_pdev = of_find_device_by_node(control_node);
+		of_node_put(control_node);
+		if (!control_pdev) {
+			dev_err(&pdev->dev, "Failed to get control device\n");
+			ret = -EINVAL;
+			goto err2;
+		}
+		glue->control_otghs = &control_pdev->dev;
+	}
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_glue	= glue;
+
+	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
+
+	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	if (populate_irqs) {
+		struct resource musb_res[3];
+		struct resource *res;
+		int i = 0;
+
+		memset(musb_res, 0, sizeof(*musb_res) * ARRAY_SIZE(musb_res));
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res) {
+			ret = -EINVAL;
+			goto err2;
+		}
+
+		musb_res[i].start = res->start;
+		musb_res[i].end = res->end;
+		musb_res[i].flags = res->flags;
+		musb_res[i].name = res->name;
+		i++;
+
+		ret = of_irq_get_byname(np, "mc");
+		if (ret > 0) {
+			musb_res[i].start = ret;
+			musb_res[i].flags = IORESOURCE_IRQ;
+			musb_res[i].name = "mc";
+			i++;
+		}
+
+		ret = of_irq_get_byname(np, "dma");
+		if (ret > 0) {
+			musb_res[i].start = ret;
+			musb_res[i].flags = IORESOURCE_IRQ;
+			musb_res[i].name = "dma";
+			i++;
+		}
+
+		ret = platform_device_add_resources(musb, musb_res, i);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add IRQ resources\n");
+			goto err2;
+		}
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	pm_runtime_enable(glue->dev);
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err3;
+	}
+
+	return 0;
+
+err3:
+	pm_runtime_disable(glue->dev);
+
+err2:
+	platform_device_put(musb);
+
+err0:
+	return ret;
+}
+
+static int omap2430_remove(struct platform_device *pdev)
+{
+	struct omap2430_glue *glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	pm_runtime_disable(glue->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int omap2430_runtime_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (!musb)
+		return 0;
+
+	musb->context.otg_interfsel = musb_readl(musb->mregs,
+						 OTG_INTERFSEL);
+
+	omap2430_low_level_exit(musb);
+
+	if (!glue->phy_suspended) {
+		phy_power_off(musb->phy);
+		phy_exit(musb->phy);
+	}
+
+	glue->is_runtime_suspended = 1;
+
+	return 0;
+}
+
+static int omap2430_runtime_resume(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (!musb)
+		return 0;
+
+	if (!glue->phy_suspended) {
+		phy_init(musb->phy);
+		phy_power_on(musb->phy);
+	}
+
+	omap2430_low_level_init(musb);
+	musb_writel(musb->mregs, OTG_INTERFSEL,
+		    musb->context.otg_interfsel);
+
+	/* Wait for musb to get oriented. Otherwise we can get babble */
+	usleep_range(200000, 250000);
+
+	glue->is_runtime_suspended = 0;
+
+	return 0;
+}
+
+/* I2C and SPI PHYs need to be suspended before the glue layer */
+static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	glue->phy_suspended = 1;
+
+	return 0;
+}
+
+/* Glue layer needs to be suspended after musb_suspend() */
+static int omap2430_suspend_late(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+
+	if (glue->is_runtime_suspended)
+		return 0;
+
+	glue->needs_resume = 1;
+
+	return omap2430_runtime_suspend(dev);
+}
+
+static int omap2430_resume_early(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+
+	if (!glue->needs_resume)
+		return 0;
+
+	glue->needs_resume = 0;
+
+	return omap2430_runtime_resume(dev);
+}
+
+static int omap2430_resume(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
+	glue->phy_suspended = 0;
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap2430_pm_ops = {
+	.runtime_suspend = omap2430_runtime_suspend,
+	.runtime_resume = omap2430_runtime_resume,
+	.suspend = omap2430_suspend,
+	.suspend_late = omap2430_suspend_late,
+	.resume_early = omap2430_resume_early,
+	.resume = omap2430_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap2430_id_table[] = {
+	{
+		.compatible = "ti,omap4-musb"
+	},
+	{
+		.compatible = "ti,omap3-musb"
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap2430_id_table);
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.probe		= omap2430_probe,
+	.remove		= omap2430_remove,
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+		.of_match_table = of_match_ptr(omap2430_id_table),
+	},
+};
+
+module_platform_driver(omap2430_driver);
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");