Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 367 insertions, 0 deletions

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
new file mode 100644
index 000000000..d5d7c402b
--- /dev/null
+++ b/drivers/xen/Kconfig
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Xen driver support"
+	depends on XEN
+
+config XEN_BALLOON
+	bool "Xen memory balloon driver"
+	default y
+	help
+	  The balloon driver allows the Xen domain to request more memory from
+	  the system to expand the domain's memory allocation, or alternatively
+	  return unneeded memory to the system.
+
+config XEN_BALLOON_MEMORY_HOTPLUG
+	bool "Memory hotplug support for Xen balloon driver"
+	depends on XEN_BALLOON && MEMORY_HOTPLUG
+	default y
+	help
+	  Memory hotplug support for Xen balloon driver allows expanding memory
+	  available for the system above limit declared at system startup.
+	  It is very useful on critical systems which require long
+	  run without rebooting.
+
+	  It's also very useful for non PV domains to obtain unpopulated physical
+	  memory ranges to use in order to map foreign memory or grants.
+
+	  Memory could be hotplugged in following steps:
+
+	    1) target domain: ensure that memory auto online policy is in
+	       effect by checking /sys/devices/system/memory/auto_online_blocks
+	       file (should be 'online').
+
+	    2) control domain: xl mem-max <target-domain> <maxmem>
+	       where <maxmem> is >= requested memory size,
+
+	    3) control domain: xl mem-set <target-domain> <memory>
+	       where <memory> is requested memory size; alternatively memory
+	       could be added by writing proper value to
+	       /sys/devices/system/xen_memory/xen_memory0/target or
+	       /sys/devices/system/xen_memory/xen_memory0/target_kb on the
+	       target domain.
+
+	  Alternatively, if memory auto onlining was not requested at step 1
+	  the newly added memory can be manually onlined in the target domain
+	  by doing the following:
+
+		for i in /sys/devices/system/memory/memory*/state; do \
+		  [ "`cat "$i"`" = offline ] && echo online > "$i"; done
+
+	  or by adding the following line to udev rules:
+
+	  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"
+
+config XEN_MEMORY_HOTPLUG_LIMIT
+	int "Hotplugged memory limit (in GiB) for a PV guest"
+	default 512
+	depends on XEN_HAVE_PVMMU
+	depends on MEMORY_HOTPLUG
+	help
+	  Maximum amount of memory (in GiB) that a PV guest can be
+	  expanded to when using memory hotplug.
+
+	  A PV guest can have more memory than this limit if is
+	  started with a larger maximum.
+
+	  This value is used to allocate enough space in internal
+	  tables needed for physical memory administration.
+
+config XEN_SCRUB_PAGES_DEFAULT
+	bool "Scrub pages before returning them to system by default"
+	depends on XEN_BALLOON
+	default y
+	help
+	  Scrub pages before returning them to the system for reuse by
+	  other domains.  This makes sure that any confidential data
+	  is not accidentally visible to other domains.  It is more
+	  secure, but slightly less efficient. This can be controlled with
+	  xen_scrub_pages=0 parameter and
+	  /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+	  This option only sets the default value.
+
+	  If in doubt, say yes.
+
+config XEN_DEV_EVTCHN
+	tristate "Xen /dev/xen/evtchn device"
+	default y
+	help
+	  The evtchn driver allows a userspace process to trigger event
+	  channels and to receive notification of an event channel
+	  firing.
+	  If in doubt, say yes.
+
+config XEN_BACKEND
+	bool "Backend driver support"
+	default XEN_DOM0
+	help
+	  Support for backend device drivers that provide I/O services
+	  to other virtual machines.
+
+config XENFS
+	tristate "Xen filesystem"
+	select XEN_PRIVCMD
+	default y
+	help
+	  The xen filesystem provides a way for domains to share
+	  information with each other and with the hypervisor.
+	  For example, by reading and writing the "xenbus" file, guests
+	  may pass arbitrary information to the initial domain.
+	  If in doubt, say yes.
+
+config XEN_COMPAT_XENFS
+	bool "Create compatibility mount point /proc/xen"
+	depends on XENFS
+	default y
+	help
+	  The old xenstore userspace tools expect to find "xenbus"
+	  under /proc/xen, but "xenbus" is now found at the root of the
+	  xenfs filesystem.  Selecting this causes the kernel to create
+	  the compatibility mount point /proc/xen if it is running on
+	  a xen platform.
+	  If in doubt, say yes.
+
+config XEN_SYS_HYPERVISOR
+	bool "Create xen entries under /sys/hypervisor"
+	depends on SYSFS
+	select SYS_HYPERVISOR
+	default y
+	help
+	  Create entries under /sys/hypervisor describing the Xen
+	  hypervisor environment.  When running native or in another
+	  virtual environment, /sys/hypervisor will still be present,
+	  but will have no xen contents.
+
+config XEN_XENBUS_FRONTEND
+	tristate
+
+config XEN_GNTDEV
+	tristate "userspace grant access device driver"
+	depends on XEN
+	default m
+	select MMU_NOTIFIER
+	help
+	  Allows userspace processes to use grants.
+
+config XEN_GNTDEV_DMABUF
+	bool "Add support for dma-buf grant access device driver extension"
+	depends on XEN_GNTDEV && XEN_GRANT_DMA_ALLOC
+	select DMA_SHARED_BUFFER
+	help
+	  Allows userspace processes and kernel modules to use Xen backed
+	  dma-buf implementation. With this extension grant references to
+	  the pages of an imported dma-buf can be exported for other domain
+	  use and grant references coming from a foreign domain can be
+	  converted into a local dma-buf for local export.
+
+config XEN_GRANT_DEV_ALLOC
+	tristate "User-space grant reference allocator driver"
+	depends on XEN
+	default m
+	help
+	  Allows userspace processes to create pages with access granted
+	  to other domains. This can be used to implement frontend drivers
+	  or as part of an inter-domain shared memory channel.
+
+config XEN_GRANT_DMA_ALLOC
+	bool "Allow allocating DMA capable buffers with grant reference module"
+	depends on XEN && HAS_DMA
+	help
+	  Extends grant table module API to allow allocating DMA capable
+	  buffers and mapping foreign grant references on top of it.
+	  The resulting buffer is similar to one allocated by the balloon
+	  driver in that proper memory reservation is made by
+	  ({increase|decrease}_reservation and VA mappings are updated if
+	  needed).
+	  This is useful for sharing foreign buffers with HW drivers which
+	  cannot work with scattered buffers provided by the balloon driver,
+	  but require DMAable memory instead.
+
+config SWIOTLB_XEN
+	def_bool y
+	depends on XEN_PV || ARM || ARM64
+	select DMA_OPS
+	select SWIOTLB
+
+config XEN_PCI_STUB
+	bool
+
+config XEN_PCIDEV_STUB
+	tristate "Xen PCI-device stub driver"
+	depends on PCI && !X86 && XEN
+	depends on XEN_BACKEND
+	select XEN_PCI_STUB
+	default m
+	help
+	  The PCI device stub driver provides limited version of the PCI
+	  device backend driver without para-virtualized support for guests.
+	  If you select this to be a module, you will need to make sure no
+	  other driver has bound to the device(s) you want to make visible to
+	  other guests.
+
+	  The "hide" parameter (only applicable if backend driver is compiled
+	  into the kernel) allows you to bind the PCI devices to this module
+	  from the default device drivers. The argument is the list of PCI BDFs:
+	  xen-pciback.hide=(03:00.0)(04:00.0)
+
+	  If in doubt, say m.
+
+config XEN_PCIDEV_BACKEND
+	tristate "Xen PCI-device backend driver"
+	depends on PCI && X86 && XEN
+	depends on XEN_BACKEND
+	select XEN_PCI_STUB
+	default m
+	help
+	  The PCI device backend driver allows the kernel to export arbitrary
+	  PCI devices to other guests. If you select this to be a module, you
+	  will need to make sure no other driver has bound to the device(s)
+	  you want to make visible to other guests.
+
+	  The parameter "passthrough" allows you specify how you want the PCI
+	  devices to appear in the guest. You can choose the default (0) where
+	  PCI topology starts at 00.00.0, or (1) for passthrough if you want
+	  the PCI devices topology appear the same as in the host.
+
+	  The "hide" parameter (only applicable if backend driver is compiled
+	  into the kernel) allows you to bind the PCI devices to this module
+	  from the default device drivers. The argument is the list of PCI BDFs:
+	  xen-pciback.hide=(03:00.0)(04:00.0)
+
+	  If in doubt, say m.
+
+config XEN_PVCALLS_FRONTEND
+	tristate "XEN PV Calls frontend driver"
+	depends on INET && XEN
+	select XEN_XENBUS_FRONTEND
+	help
+	  Experimental frontend for the Xen PV Calls protocol
+	  (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It
+	  sends a small set of POSIX calls to the backend, which
+	  implements them.
+
+config XEN_PVCALLS_BACKEND
+	tristate "XEN PV Calls backend driver"
+	depends on INET && XEN && XEN_BACKEND
+	help
+	  Experimental backend for the Xen PV Calls protocol
+	  (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It
+	  allows PV Calls frontends to send POSIX calls to the backend,
+	  which implements them.
+
+	  If in doubt, say n.
+
+config XEN_SCSI_BACKEND
+	tristate "XEN SCSI backend driver"
+	depends on XEN && XEN_BACKEND && TARGET_CORE
+	help
+	  The SCSI backend driver allows the kernel to export its SCSI Devices
+	  to other guests via a high-performance shared-memory interface.
+	  Only needed for systems running as XEN driver domains (e.g. Dom0) and
+	  if guests need generic access to SCSI devices.
+
+config XEN_PRIVCMD
+	tristate "Xen hypercall passthrough driver"
+	depends on XEN
+	default m
+	help
+	  The hypercall passthrough driver allows privileged user programs to
+	  perform Xen hypercalls. This driver is normally required for systems
+	  running as Dom0 to perform privileged operations, but in some
+	  disaggregated Xen setups this driver might be needed for other
+	  domains, too.
+
+config XEN_ACPI_PROCESSOR
+	tristate "Xen ACPI processor"
+	depends on XEN && XEN_PV_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ
+	default m
+	help
+	  This ACPI processor uploads Power Management information to the Xen
+	  hypervisor.
+
+	  To do that the driver parses the Power Management data and uploads
+	  said information to the Xen hypervisor. Then the Xen hypervisor can
+	  select the proper Cx and Pxx states. It also registers itself as the
+	  SMM so that other drivers (such as ACPI cpufreq scaling driver) will
+	  not load.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called xen_acpi_processor  If you do not know what to choose, select
+	  M here. If the CPUFREQ drivers are built in, select Y here.
+
+config XEN_MCE_LOG
+	bool "Xen platform mcelog"
+	depends on XEN_PV_DOM0 && X86_MCE
+	help
+	  Allow kernel fetching MCE error from Xen platform and
+	  converting it into Linux mcelog format for mcelog tools
+
+config XEN_HAVE_PVMMU
+	bool
+
+config XEN_EFI
+	def_bool y
+	depends on (ARM || ARM64 || X86_64) && EFI
+
+config XEN_AUTO_XLATE
+	def_bool y
+	depends on ARM || ARM64 || XEN_PVHVM
+	help
+	  Support for auto-translated physmap guests.
+
+config XEN_ACPI
+	def_bool y
+	depends on X86 && ACPI
+
+config XEN_SYMS
+	bool "Xen symbols"
+	depends on X86 && XEN_DOM0 && XENFS
+	default y if KALLSYMS
+	help
+	  Exports hypervisor symbols (along with their types and addresses) via
+	  /proc/xen/xensyms file, similar to /proc/kallsyms
+
+config XEN_HAVE_VPMU
+	bool
+
+config XEN_FRONT_PGDIR_SHBUF
+	tristate
+
+config XEN_UNPOPULATED_ALLOC
+	bool "Use unpopulated memory ranges for guest mappings"
+	depends on ZONE_DEVICE
+	default XEN_BACKEND || XEN_GNTDEV || XEN_DOM0
+	help
+	  Use unpopulated memory ranges in order to create mappings for guest
+	  memory regions, including grant maps and foreign pages. This avoids
+	  having to balloon out RAM regions in order to obtain physical memory
+	  space to create such mappings.
+
+config XEN_GRANT_DMA_IOMMU
+	bool
+	select IOMMU_API
+
+config XEN_GRANT_DMA_OPS
+	bool
+	select DMA_OPS
+
+config XEN_VIRTIO
+	bool "Xen virtio support"
+	depends on VIRTIO
+	select XEN_GRANT_DMA_OPS
+	select XEN_GRANT_DMA_IOMMU if OF
+	help
+	  Enable virtio support for running as Xen guest. Depending on the
+	  guest type this will require special support on the backend side
+	  (qemu or kernel, depending on the virtio device types used).
+
+	  If in doubt, say n.
+
+config XEN_VIRTIO_FORCE_GRANT
+	bool "Require Xen virtio support to use grants"
+	depends on XEN_VIRTIO
+	help
+	  Require virtio for Xen guests to use grant mappings.
+	  This will avoid the need to give the backend the right to map all
+	  of the guest memory. This will need support on the backend side
+	  (e.g. qemu or kernel, depending on the virtio device types used).
+
+endmenu