Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 496 insertions, 0 deletions

diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
new file mode 100644
index 000000000..71f6d8302
--- /dev/null
+++ b/fs/btrfs/lzo.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2008 Oracle.  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/bio.h>
+#include <linux/lzo.h>
+#include <linux/refcount.h>
+#include "messages.h"
+#include "compression.h"
+#include "ctree.h"
+#include "super.h"
+
+#define LZO_LEN	4
+
+/*
+ * Btrfs LZO compression format
+ *
+ * Regular and inlined LZO compressed data extents consist of:
+ *
+ * 1.  Header
+ *     Fixed size. LZO_LEN (4) bytes long, LE32.
+ *     Records the total size (including the header) of compressed data.
+ *
+ * 2.  Segment(s)
+ *     Variable size. Each segment includes one segment header, followed by data
+ *     payload.
+ *     One regular LZO compressed extent can have one or more segments.
+ *     For inlined LZO compressed extent, only one segment is allowed.
+ *     One segment represents at most one sector of uncompressed data.
+ *
+ * 2.1 Segment header
+ *     Fixed size. LZO_LEN (4) bytes long, LE32.
+ *     Records the total size of the segment (not including the header).
+ *     Segment header never crosses sector boundary, thus it's possible to
+ *     have at most 3 padding zeros at the end of the sector.
+ *
+ * 2.2 Data Payload
+ *     Variable size. Size up limit should be lzo1x_worst_compress(sectorsize)
+ *     which is 4419 for a 4KiB sectorsize.
+ *
+ * Example with 4K sectorsize:
+ * Page 1:
+ *          0     0x2   0x4   0x6   0x8   0xa   0xc   0xe     0x10
+ * 0x0000   |  Header   | SegHdr 01 | Data payload 01 ...     |
+ * ...
+ * 0x0ff0   | SegHdr  N | Data payload  N     ...          |00|
+ *                                                          ^^ padding zeros
+ * Page 2:
+ * 0x1000   | SegHdr N+1| Data payload N+1 ...                |
+ */
+
+#define WORKSPACE_BUF_LENGTH	(lzo1x_worst_compress(PAGE_SIZE))
+#define WORKSPACE_CBUF_LENGTH	(lzo1x_worst_compress(PAGE_SIZE))
+
+struct workspace {
+	void *mem;
+	void *buf;	/* where decompressed data goes */
+	void *cbuf;	/* where compressed data goes */
+	struct list_head list;
+};
+
+static struct workspace_manager wsm;
+
+void lzo_free_workspace(struct list_head *ws)
+{
+	struct workspace *workspace = list_entry(ws, struct workspace, list);
+
+	kvfree(workspace->buf);
+	kvfree(workspace->cbuf);
+	kvfree(workspace->mem);
+	kfree(workspace);
+}
+
+struct list_head *lzo_alloc_workspace(unsigned int level)
+{
+	struct workspace *workspace;
+
+	workspace = kzalloc(sizeof(*workspace), GFP_KERNEL);
+	if (!workspace)
+		return ERR_PTR(-ENOMEM);
+
+	workspace->mem = kvmalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
+	workspace->buf = kvmalloc(WORKSPACE_BUF_LENGTH, GFP_KERNEL);
+	workspace->cbuf = kvmalloc(WORKSPACE_CBUF_LENGTH, GFP_KERNEL);
+	if (!workspace->mem || !workspace->buf || !workspace->cbuf)
+		goto fail;
+
+	INIT_LIST_HEAD(&workspace->list);
+
+	return &workspace->list;
+fail:
+	lzo_free_workspace(&workspace->list);
+	return ERR_PTR(-ENOMEM);
+}
+
+static inline void write_compress_length(char *buf, size_t len)
+{
+	__le32 dlen;
+
+	dlen = cpu_to_le32(len);
+	memcpy(buf, &dlen, LZO_LEN);
+}
+
+static inline size_t read_compress_length(const char *buf)
+{
+	__le32 dlen;
+
+	memcpy(&dlen, buf, LZO_LEN);
+	return le32_to_cpu(dlen);
+}
+
+/*
+ * Will do:
+ *
+ * - Write a segment header into the destination
+ * - Copy the compressed buffer into the destination
+ * - Make sure we have enough space in the last sector to fit a segment header
+ *   If not, we will pad at most (LZO_LEN (4)) - 1 bytes of zeros.
+ *
+ * Will allocate new pages when needed.
+ */
+static int copy_compressed_data_to_page(char *compressed_data,
+					size_t compressed_size,
+					struct page **out_pages,
+					unsigned long max_nr_page,
+					u32 *cur_out,
+					const u32 sectorsize)
+{
+	u32 sector_bytes_left;
+	u32 orig_out;
+	struct page *cur_page;
+	char *kaddr;
+
+	if ((*cur_out / PAGE_SIZE) >= max_nr_page)
+		return -E2BIG;
+
+	/*
+	 * We never allow a segment header crossing sector boundary, previous
+	 * run should ensure we have enough space left inside the sector.
+	 */
+	ASSERT((*cur_out / sectorsize) == (*cur_out + LZO_LEN - 1) / sectorsize);
+
+	cur_page = out_pages[*cur_out / PAGE_SIZE];
+	/* Allocate a new page */
+	if (!cur_page) {
+		cur_page = alloc_page(GFP_NOFS);
+		if (!cur_page)
+			return -ENOMEM;
+		out_pages[*cur_out / PAGE_SIZE] = cur_page;
+	}
+
+	kaddr = kmap_local_page(cur_page);
+	write_compress_length(kaddr + offset_in_page(*cur_out),
+			      compressed_size);
+	*cur_out += LZO_LEN;
+
+	orig_out = *cur_out;
+
+	/* Copy compressed data */
+	while (*cur_out - orig_out < compressed_size) {
+		u32 copy_len = min_t(u32, sectorsize - *cur_out % sectorsize,
+				     orig_out + compressed_size - *cur_out);
+
+		kunmap_local(kaddr);
+
+		if ((*cur_out / PAGE_SIZE) >= max_nr_page)
+			return -E2BIG;
+
+		cur_page = out_pages[*cur_out / PAGE_SIZE];
+		/* Allocate a new page */
+		if (!cur_page) {
+			cur_page = alloc_page(GFP_NOFS);
+			if (!cur_page)
+				return -ENOMEM;
+			out_pages[*cur_out / PAGE_SIZE] = cur_page;
+		}
+		kaddr = kmap_local_page(cur_page);
+
+		memcpy(kaddr + offset_in_page(*cur_out),
+		       compressed_data + *cur_out - orig_out, copy_len);
+
+		*cur_out += copy_len;
+	}
+
+	/*
+	 * Check if we can fit the next segment header into the remaining space
+	 * of the sector.
+	 */
+	sector_bytes_left = round_up(*cur_out, sectorsize) - *cur_out;
+	if (sector_bytes_left >= LZO_LEN || sector_bytes_left == 0)
+		goto out;
+
+	/* The remaining size is not enough, pad it with zeros */
+	memset(kaddr + offset_in_page(*cur_out), 0,
+	       sector_bytes_left);
+	*cur_out += sector_bytes_left;
+
+out:
+	kunmap_local(kaddr);
+	return 0;
+}
+
+int lzo_compress_pages(struct list_head *ws, struct address_space *mapping,
+		u64 start, struct page **pages, unsigned long *out_pages,
+		unsigned long *total_in, unsigned long *total_out)
+{
+	struct workspace *workspace = list_entry(ws, struct workspace, list);
+	const u32 sectorsize = btrfs_sb(mapping->host->i_sb)->sectorsize;
+	struct page *page_in = NULL;
+	char *sizes_ptr;
+	const unsigned long max_nr_page = *out_pages;
+	int ret = 0;
+	/* Points to the file offset of input data */
+	u64 cur_in = start;
+	/* Points to the current output byte */
+	u32 cur_out = 0;
+	u32 len = *total_out;
+
+	ASSERT(max_nr_page > 0);
+	*out_pages = 0;
+	*total_out = 0;
+	*total_in = 0;
+
+	/*
+	 * Skip the header for now, we will later come back and write the total
+	 * compressed size
+	 */
+	cur_out += LZO_LEN;
+	while (cur_in < start + len) {
+		char *data_in;
+		const u32 sectorsize_mask = sectorsize - 1;
+		u32 sector_off = (cur_in - start) & sectorsize_mask;
+		u32 in_len;
+		size_t out_len;
+
+		/* Get the input page first */
+		if (!page_in) {
+			page_in = find_get_page(mapping, cur_in >> PAGE_SHIFT);
+			ASSERT(page_in);
+		}
+
+		/* Compress at most one sector of data each time */
+		in_len = min_t(u32, start + len - cur_in, sectorsize - sector_off);
+		ASSERT(in_len);
+		data_in = kmap_local_page(page_in);
+		ret = lzo1x_1_compress(data_in +
+				       offset_in_page(cur_in), in_len,
+				       workspace->cbuf, &out_len,
+				       workspace->mem);
+		kunmap_local(data_in);
+		if (ret < 0) {
+			pr_debug("BTRFS: lzo in loop returned %d\n", ret);
+			ret = -EIO;
+			goto out;
+		}
+
+		ret = copy_compressed_data_to_page(workspace->cbuf, out_len,
+						   pages, max_nr_page,
+						   &cur_out, sectorsize);
+		if (ret < 0)
+			goto out;
+
+		cur_in += in_len;
+
+		/*
+		 * Check if we're making it bigger after two sectors.  And if
+		 * it is so, give up.
+		 */
+		if (cur_in - start > sectorsize * 2 && cur_in - start < cur_out) {
+			ret = -E2BIG;
+			goto out;
+		}
+
+		/* Check if we have reached page boundary */
+		if (PAGE_ALIGNED(cur_in)) {
+			put_page(page_in);
+			page_in = NULL;
+		}
+	}
+
+	/* Store the size of all chunks of compressed data */
+	sizes_ptr = kmap_local_page(pages[0]);
+	write_compress_length(sizes_ptr, cur_out);
+	kunmap_local(sizes_ptr);
+
+	ret = 0;
+	*total_out = cur_out;
+	*total_in = cur_in - start;
+out:
+	if (page_in)
+		put_page(page_in);
+	*out_pages = DIV_ROUND_UP(cur_out, PAGE_SIZE);
+	return ret;
+}
+
+/*
+ * Copy the compressed segment payload into @dest.
+ *
+ * For the payload there will be no padding, just need to do page switching.
+ */
+static void copy_compressed_segment(struct compressed_bio *cb,
+				    char *dest, u32 len, u32 *cur_in)
+{
+	u32 orig_in = *cur_in;
+
+	while (*cur_in < orig_in + len) {
+		struct page *cur_page;
+		u32 copy_len = min_t(u32, PAGE_SIZE - offset_in_page(*cur_in),
+					  orig_in + len - *cur_in);
+
+		ASSERT(copy_len);
+		cur_page = cb->compressed_pages[*cur_in / PAGE_SIZE];
+
+		memcpy_from_page(dest + *cur_in - orig_in, cur_page,
+				 offset_in_page(*cur_in), copy_len);
+
+		*cur_in += copy_len;
+	}
+}
+
+int lzo_decompress_bio(struct list_head *ws, struct compressed_bio *cb)
+{
+	struct workspace *workspace = list_entry(ws, struct workspace, list);
+	const struct btrfs_fs_info *fs_info = btrfs_sb(cb->inode->i_sb);
+	const u32 sectorsize = fs_info->sectorsize;
+	char *kaddr;
+	int ret;
+	/* Compressed data length, can be unaligned */
+	u32 len_in;
+	/* Offset inside the compressed data */
+	u32 cur_in = 0;
+	/* Bytes decompressed so far */
+	u32 cur_out = 0;
+
+	kaddr = kmap_local_page(cb->compressed_pages[0]);
+	len_in = read_compress_length(kaddr);
+	kunmap_local(kaddr);
+	cur_in += LZO_LEN;
+
+	/*
+	 * LZO header length check
+	 *
+	 * The total length should not exceed the maximum extent length,
+	 * and all sectors should be used.
+	 * If this happens, it means the compressed extent is corrupted.
+	 */
+	if (len_in > min_t(size_t, BTRFS_MAX_COMPRESSED, cb->compressed_len) ||
+	    round_up(len_in, sectorsize) < cb->compressed_len) {
+		btrfs_err(fs_info,
+			"invalid lzo header, lzo len %u compressed len %u",
+			len_in, cb->compressed_len);
+		return -EUCLEAN;
+	}
+
+	/* Go through each lzo segment */
+	while (cur_in < len_in) {
+		struct page *cur_page;
+		/* Length of the compressed segment */
+		u32 seg_len;
+		u32 sector_bytes_left;
+		size_t out_len = lzo1x_worst_compress(sectorsize);
+
+		/*
+		 * We should always have enough space for one segment header
+		 * inside current sector.
+		 */
+		ASSERT(cur_in / sectorsize ==
+		       (cur_in + LZO_LEN - 1) / sectorsize);
+		cur_page = cb->compressed_pages[cur_in / PAGE_SIZE];
+		ASSERT(cur_page);
+		kaddr = kmap_local_page(cur_page);
+		seg_len = read_compress_length(kaddr + offset_in_page(cur_in));
+		kunmap_local(kaddr);
+		cur_in += LZO_LEN;
+
+		if (seg_len > WORKSPACE_CBUF_LENGTH) {
+			/*
+			 * seg_len shouldn't be larger than we have allocated
+			 * for workspace->cbuf
+			 */
+			btrfs_err(fs_info, "unexpectedly large lzo segment len %u",
+					seg_len);
+			ret = -EIO;
+			goto out;
+		}
+
+		/* Copy the compressed segment payload into workspace */
+		copy_compressed_segment(cb, workspace->cbuf, seg_len, &cur_in);
+
+		/* Decompress the data */
+		ret = lzo1x_decompress_safe(workspace->cbuf, seg_len,
+					    workspace->buf, &out_len);
+		if (ret != LZO_E_OK) {
+			btrfs_err(fs_info, "failed to decompress");
+			ret = -EIO;
+			goto out;
+		}
+
+		/* Copy the data into inode pages */
+		ret = btrfs_decompress_buf2page(workspace->buf, out_len, cb, cur_out);
+		cur_out += out_len;
+
+		/* All data read, exit */
+		if (ret == 0)
+			goto out;
+		ret = 0;
+
+		/* Check if the sector has enough space for a segment header */
+		sector_bytes_left = sectorsize - (cur_in % sectorsize);
+		if (sector_bytes_left >= LZO_LEN)
+			continue;
+
+		/* Skip the padding zeros */
+		cur_in += sector_bytes_left;
+	}
+out:
+	if (!ret)
+		zero_fill_bio(cb->orig_bio);
+	return ret;
+}
+
+int lzo_decompress(struct list_head *ws, const u8 *data_in,
+		struct page *dest_page, unsigned long start_byte, size_t srclen,
+		size_t destlen)
+{
+	struct workspace *workspace = list_entry(ws, struct workspace, list);
+	size_t in_len;
+	size_t out_len;
+	size_t max_segment_len = WORKSPACE_BUF_LENGTH;
+	int ret = 0;
+	char *kaddr;
+	unsigned long bytes;
+
+	if (srclen < LZO_LEN || srclen > max_segment_len + LZO_LEN * 2)
+		return -EUCLEAN;
+
+	in_len = read_compress_length(data_in);
+	if (in_len != srclen)
+		return -EUCLEAN;
+	data_in += LZO_LEN;
+
+	in_len = read_compress_length(data_in);
+	if (in_len != srclen - LZO_LEN * 2) {
+		ret = -EUCLEAN;
+		goto out;
+	}
+	data_in += LZO_LEN;
+
+	out_len = PAGE_SIZE;
+	ret = lzo1x_decompress_safe(data_in, in_len, workspace->buf, &out_len);
+	if (ret != LZO_E_OK) {
+		pr_warn("BTRFS: decompress failed!\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (out_len < start_byte) {
+		ret = -EIO;
+		goto out;
+	}
+
+	/*
+	 * the caller is already checking against PAGE_SIZE, but lets
+	 * move this check closer to the memcpy/memset
+	 */
+	destlen = min_t(unsigned long, destlen, PAGE_SIZE);
+	bytes = min_t(unsigned long, destlen, out_len - start_byte);
+
+	kaddr = kmap_local_page(dest_page);
+	memcpy(kaddr, workspace->buf + start_byte, bytes);
+
+	/*
+	 * btrfs_getblock is doing a zero on the tail of the page too,
+	 * but this will cover anything missing from the decompressed
+	 * data.
+	 */
+	if (bytes < destlen)
+		memset(kaddr+bytes, 0, destlen-bytes);
+	kunmap_local(kaddr);
+out:
+	return ret;
+}
+
+const struct btrfs_compress_op btrfs_lzo_compress = {
+	.workspace_manager	= &wsm,
+	.max_level		= 1,
+	.default_level		= 1,
+};