Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
new file mode 100644
index 000000000..4b968448f
--- /dev/null
+++ b/include/scsi/fc/fc_fcp.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCP_H_
+#define	_FC_FCP_H_
+
+#include <scsi/scsi.h>
+
+/*
+ * Fibre Channel Protocol for SCSI.
+ * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
+ */
+
+/*
+ * fc/fs.h defines FC_TYPE_FCP.
+ */
+
+/*
+ * Service parameter page parameters (word 3 bits) for Process Login.
+ */
+#define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
+#define	FCP_SPPF_RETRY		0x0100	/* retry supported */
+#define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
+#define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
+#define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
+#define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
+#define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
+#define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */
+
+/*
+ * FCP_CMND IU Payload.
+ */
+struct fcp_cmnd {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[16];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND_LEN	32	/* expected length of structure */
+
+struct fcp_cmnd32 {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[32];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND32_LEN	    48	/* expected length of structure */
+#define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */
+
+/*
+ * fc_pri_ta.
+ */
+#define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
+#define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
+#define	FCP_PTA_ORDERED     2	/* ordered task attribute */
+#define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
+#define	FCP_PTA_MASK	    7	/* mask for task attribute field */
+#define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
+#define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
+
+/*
+ * fc_tm_flags - task management flags field.
+ */
+#define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
+#define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
+					   deprecated as of FCP-3 */
+#define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
+#define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
+#define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */
+
+/*
+ * fc_flags.
+ *  Bits 7:2 are the additional FCP_CDB length / 4.
+ */
+#define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
+#define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
+#define	FCP_CFL_RDDATA		0x02	/* read data */
+#define	FCP_CFL_WRDATA		0x01	/* write data */
+
+/*
+ * FCP_TXRDY IU - transfer ready payload.
+ */
+struct fcp_txrdy {
+	__be32		ft_data_ro;	/* data relative offset */
+	__be32		ft_burst_len;	/* burst length */
+	__u8		_ft_resvd[4];	/* reserved */
+};
+
+#define	FCP_TXRDY_LEN	12	/* expected length of structure */
+
+/*
+ * FCP_RESP IU - response payload.
+ *
+ * The response payload comes in three parts: the flags/status, the
+ * sense/response lengths and the sense data/response info section.
+ *
+ * From FCP3r04, note 6 of section 9.5.13:
+ *
+ * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
+ * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
+ * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
+ * non-standard behavior should be tolerated.
+ *
+ * All response frames will always contain the fcp_resp template.  Some
+ * will also include the fcp_resp_len template.
+ *
+ * From Table 23, the FCP_RSP_INFO can either be 4 bytes or 8 bytes, both
+ * are valid length.
+ */
+struct fcp_resp {
+	__u8		_fr_resvd[8];	/* reserved */
+	__be16		fr_retry_delay;	/* retry delay timer */
+	__u8		fr_flags;	/* flags */
+	__u8		fr_status;	/* SCSI status code */
+};
+
+#define	FCP_RESP_LEN	12	/* expected length of structure */
+
+struct fcp_resp_ext {
+	__be32		fr_resid;	/* Residual value */
+	__be32		fr_sns_len;	/* SCSI Sense length */
+	__be32		fr_rsp_len;	/* Response Info length */
+
+	/*
+	 * Optionally followed by RSP info and/or SNS info and/or
+	 * bidirectional read residual length, if any.
+	 */
+};
+
+#define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
+
+struct fcp_resp_rsp_info {
+    __u8      _fr_resvd[3];       /* reserved */
+    __u8      rsp_code;           /* Response Info Code */
+    __u8      _fr_resvd2[4];      /* reserved */
+};
+
+#define FCP_RESP_RSP_INFO_LEN4    4 /* without reserved field */
+#define FCP_RESP_RSP_INFO_LEN8    8 /* with reserved field */
+
+struct fcp_resp_with_ext {
+	struct fcp_resp resp;
+	struct fcp_resp_ext ext;
+};
+
+#define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
+
+/*
+ * fr_flags.
+ */
+#define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
+#define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
+#define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
+#define	FCP_CONF_REQ	    0x10	/* confirmation requested */
+#define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
+#define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
+#define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
+#define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */
+
+/*
+ * rsp_codes
+ */
+enum fcp_resp_rsp_codes {
+	FCP_TMF_CMPL = 0,
+	FCP_DATA_LEN_INVALID = 1,
+	FCP_CMND_FIELDS_INVALID = 2,
+	FCP_DATA_PARAM_MISMATCH = 3,
+	FCP_TMF_REJECTED = 4,
+	FCP_TMF_FAILED = 5,
+	FCP_TMF_INVALID_LUN = 9,
+};
+
+/*
+ * FCP SRR Link Service request - Sequence Retransmission Request.
+ */
+struct fcp_srr {
+	__u8		srr_op;		/* opcode ELS_SRR */
+	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
+	__be16		srr_ox_id;	/* OX_ID of failed command */
+	__be16		srr_rx_id;	/* RX_ID of failed command */
+	__be32		srr_rel_off;	/* relative offset */
+	__u8		srr_r_ctl;	/* r_ctl for the information unit */
+	__u8		srr_resvd2[3];	/* reserved */
+};
+
+/*
+ * Feature bits in name server FC-4 Features object.
+ */
+#define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
+#define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */
+
+#endif /* _FC_FCP_H_ */