Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 292 insertions, 0 deletions

diff --git a/include/uapi/drm/i810_drm.h b/include/uapi/drm/i810_drm.h
new file mode 100644
index 000000000..d285d5e72
--- /dev/null
+++ b/include/uapi/drm/i810_drm.h
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _I810_DRM_H_
+#define _I810_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _I810_DEFINES_
+#define _I810_DEFINES_
+
+#define I810_DMA_BUF_ORDER		12
+#define I810_DMA_BUF_SZ 		(1<<I810_DMA_BUF_ORDER)
+#define I810_DMA_BUF_NR 		256
+#define I810_NR_SAREA_CLIPRECTS 	8
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define I810_NR_TEX_REGIONS 64
+#define I810_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define I810_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
+#define I810_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
+#define I810_UPLOAD_CTX        0x4
+#define I810_UPLOAD_BUFFERS    0x8
+#define I810_UPLOAD_TEX0       0x10
+#define I810_UPLOAD_TEX1       0x20
+#define I810_UPLOAD_CLIPRECTS  0x40
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer.  These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+/* Destbuffer state
+ *    - backbuffer linear offset and pitch -- invarient in the current dri
+ *    - zbuffer linear offset and pitch -- also invarient
+ *    - drawing origin in back and depth buffers.
+ *
+ * Keep the depth/back buffer state here to accommodate private buffers
+ * in the future.
+ */
+#define I810_DESTREG_DI0  0	/* CMD_OP_DESTBUFFER_INFO (2 dwords) */
+#define I810_DESTREG_DI1  1
+#define I810_DESTREG_DV0  2	/* GFX_OP_DESTBUFFER_VARS (2 dwords) */
+#define I810_DESTREG_DV1  3
+#define I810_DESTREG_DR0  4	/* GFX_OP_DRAWRECT_INFO (4 dwords) */
+#define I810_DESTREG_DR1  5
+#define I810_DESTREG_DR2  6
+#define I810_DESTREG_DR3  7
+#define I810_DESTREG_DR4  8
+#define I810_DEST_SETUP_SIZE 10
+
+/* Context state
+ */
+#define I810_CTXREG_CF0   0	/* GFX_OP_COLOR_FACTOR */
+#define I810_CTXREG_CF1   1
+#define I810_CTXREG_ST0   2	/* GFX_OP_STIPPLE */
+#define I810_CTXREG_ST1   3
+#define I810_CTXREG_VF    4	/* GFX_OP_VERTEX_FMT */
+#define I810_CTXREG_MT    5	/* GFX_OP_MAP_TEXELS */
+#define I810_CTXREG_MC0   6	/* GFX_OP_MAP_COLOR_STAGES - stage 0 */
+#define I810_CTXREG_MC1   7	/* GFX_OP_MAP_COLOR_STAGES - stage 1 */
+#define I810_CTXREG_MC2   8	/* GFX_OP_MAP_COLOR_STAGES - stage 2 */
+#define I810_CTXREG_MA0   9	/* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
+#define I810_CTXREG_MA1   10	/* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
+#define I810_CTXREG_MA2   11	/* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
+#define I810_CTXREG_SDM   12	/* GFX_OP_SRC_DEST_MONO */
+#define I810_CTXREG_FOG   13	/* GFX_OP_FOG_COLOR */
+#define I810_CTXREG_B1    14	/* GFX_OP_BOOL_1 */
+#define I810_CTXREG_B2    15	/* GFX_OP_BOOL_2 */
+#define I810_CTXREG_LCS   16	/* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
+#define I810_CTXREG_PV    17	/* GFX_OP_PV_RULE -- Invarient! */
+#define I810_CTXREG_ZA    18	/* GFX_OP_ZBIAS_ALPHAFUNC */
+#define I810_CTXREG_AA    19	/* GFX_OP_ANTIALIAS */
+#define I810_CTX_SETUP_SIZE 20
+
+/* Texture state (per tex unit)
+ */
+#define I810_TEXREG_MI0  0	/* GFX_OP_MAP_INFO (4 dwords) */
+#define I810_TEXREG_MI1  1
+#define I810_TEXREG_MI2  2
+#define I810_TEXREG_MI3  3
+#define I810_TEXREG_MF   4	/* GFX_OP_MAP_FILTER */
+#define I810_TEXREG_MLC  5	/* GFX_OP_MAP_LOD_CTL */
+#define I810_TEXREG_MLL  6	/* GFX_OP_MAP_LOD_LIMITS */
+#define I810_TEXREG_MCS  7	/* GFX_OP_MAP_COORD_SETS ??? */
+#define I810_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define I810_FRONT   0x1
+#define I810_BACK    0x2
+#define I810_DEPTH   0x4
+
+typedef enum _drm_i810_init_func {
+	I810_INIT_DMA = 0x01,
+	I810_CLEANUP_DMA = 0x02,
+	I810_INIT_DMA_1_4 = 0x03
+} drm_i810_init_func_t;
+
+/* This is the init structure after v1.2 */
+typedef struct _drm_i810_init {
+	drm_i810_init_func_t func;
+	unsigned int mmio_offset;
+	unsigned int buffers_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int overlay_offset;
+	unsigned int overlay_physical;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+} drm_i810_init_t;
+
+/* This is the init structure prior to v1.2 */
+typedef struct _drm_i810_pre12_init {
+	drm_i810_init_func_t func;
+	unsigned int mmio_offset;
+	unsigned int buffers_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+} drm_i810_pre12_init_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_i810_tex_region {
+	unsigned char next, prev;	/* indices to form a circular LRU  */
+	unsigned char in_use;	/* owned by a client, or free? */
+	int age;		/* tracked by clients to update local LRU's */
+} drm_i810_tex_region_t;
+
+typedef struct _drm_i810_sarea {
+	unsigned int ContextState[I810_CTX_SETUP_SIZE];
+	unsigned int BufferState[I810_DEST_SETUP_SIZE];
+	unsigned int TexState[2][I810_TEX_SETUP_SIZE];
+	unsigned int dirty;
+
+	unsigned int nbox;
+	struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
+
+	/* Maintain an LRU of contiguous regions of texture space.  If
+	 * you think you own a region of texture memory, and it has an
+	 * age different to the one you set, then you are mistaken and
+	 * it has been stolen by another client.  If global texAge
+	 * hasn't changed, there is no need to walk the list.
+	 *
+	 * These regions can be used as a proxy for the fine-grained
+	 * texture information of other clients - by maintaining them
+	 * in the same lru which is used to age their own textures,
+	 * clients have an approximate lru for the whole of global
+	 * texture space, and can make informed decisions as to which
+	 * areas to kick out.  There is no need to choose whether to
+	 * kick out your own texture or someone else's - simply eject
+	 * them all in LRU order.
+	 */
+
+	drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
+	/* Last elt is sentinal */
+	int texAge;		/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int last_quiescent;	/*  */
+	int ctxOwner;		/* last context to upload state */
+
+	int vertex_prim;
+
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+} drm_i810_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmMga.h)
+ */
+
+/* i810 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I810_INIT		0x00
+#define DRM_I810_VERTEX		0x01
+#define DRM_I810_CLEAR		0x02
+#define DRM_I810_FLUSH		0x03
+#define DRM_I810_GETAGE		0x04
+#define DRM_I810_GETBUF		0x05
+#define DRM_I810_SWAP		0x06
+#define DRM_I810_COPY		0x07
+#define DRM_I810_DOCOPY		0x08
+#define DRM_I810_OV0INFO	0x09
+#define DRM_I810_FSTATUS	0x0a
+#define DRM_I810_OV0FLIP	0x0b
+#define DRM_I810_MC		0x0c
+#define DRM_I810_RSTATUS	0x0d
+#define DRM_I810_FLIP		0x0e
+
+#define DRM_IOCTL_I810_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
+#define DRM_IOCTL_I810_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
+#define DRM_IOCTL_I810_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
+#define DRM_IOCTL_I810_FLUSH		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_FLUSH)
+#define DRM_IOCTL_I810_GETAGE		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_GETAGE)
+#define DRM_IOCTL_I810_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
+#define DRM_IOCTL_I810_SWAP		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_SWAP)
+#define DRM_IOCTL_I810_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
+#define DRM_IOCTL_I810_DOCOPY		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_DOCOPY)
+#define DRM_IOCTL_I810_OV0INFO		DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
+#define DRM_IOCTL_I810_FSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
+#define DRM_IOCTL_I810_OV0FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
+#define DRM_IOCTL_I810_MC		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
+#define DRM_IOCTL_I810_RSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
+#define DRM_IOCTL_I810_FLIP             DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
+
+typedef struct _drm_i810_clear {
+	int clear_color;
+	int clear_depth;
+	int flags;
+} drm_i810_clear_t;
+
+/* These may be placeholders if we have more cliprects than
+ * I810_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
+ * false, indicating that the buffer will be dispatched again with a
+ * new set of cliprects.
+ */
+typedef struct _drm_i810_vertex {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	int discard;		/* client is finished with the buffer? */
+} drm_i810_vertex_t;
+
+typedef struct _drm_i810_copy_t {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	void *address;		/* Address to copy from */
+} drm_i810_copy_t;
+
+#define PR_TRIANGLES         (0x0<<18)
+#define PR_TRISTRIP_0        (0x1<<18)
+#define PR_TRISTRIP_1        (0x2<<18)
+#define PR_TRIFAN            (0x3<<18)
+#define PR_POLYGON           (0x4<<18)
+#define PR_LINES             (0x5<<18)
+#define PR_LINESTRIP         (0x6<<18)
+#define PR_RECTS             (0x7<<18)
+#define PR_MASK              (0x7<<18)
+
+typedef struct drm_i810_dma {
+	void *virtual;
+	int request_idx;
+	int request_size;
+	int granted;
+} drm_i810_dma_t;
+
+typedef struct _drm_i810_overlay_t {
+	unsigned int offset;	/* Address of the Overlay Regs */
+	unsigned int physical;
+} drm_i810_overlay_t;
+
+typedef struct _drm_i810_mc {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	int num_blocks;		/* number of GFXBlocks */
+	int *length;		/* List of lengths for GFXBlocks (FUTURE) */
+	unsigned int last_render;	/* Last Render Request */
+} drm_i810_mc_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif				/* _I810_DRM_H_ */