Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 315 insertions, 0 deletions

diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c
new file mode 100644
index 000000000..a286e726e
--- /dev/null
+++ b/kernel/sched/cpupri.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  kernel/sched/cpupri.c
+ *
+ *  CPU priority management
+ *
+ *  Copyright (C) 2007-2008 Novell
+ *
+ *  Author: Gregory Haskins <ghaskins@novell.com>
+ *
+ *  This code tracks the priority of each CPU so that global migration
+ *  decisions are easy to calculate.  Each CPU can be in a state as follows:
+ *
+ *                 (INVALID), NORMAL, RT1, ... RT99, HIGHER
+ *
+ *  going from the lowest priority to the highest.  CPUs in the INVALID state
+ *  are not eligible for routing.  The system maintains this state with
+ *  a 2 dimensional bitmap (the first for priority class, the second for CPUs
+ *  in that class).  Therefore a typical application without affinity
+ *  restrictions can find a suitable CPU with O(1) complexity (e.g. two bit
+ *  searches).  For tasks with affinity restrictions, the algorithm has a
+ *  worst case complexity of O(min(101, nr_domcpus)), though the scenario that
+ *  yields the worst case search is fairly contrived.
+ */
+
+/*
+ * p->rt_priority   p->prio   newpri   cpupri
+ *
+ *				  -1       -1 (CPUPRI_INVALID)
+ *
+ *				  99        0 (CPUPRI_NORMAL)
+ *
+ *		1        98       98        1
+ *	      ...
+ *	       49        50       50       49
+ *	       50        49       49       50
+ *	      ...
+ *	       99         0        0       99
+ *
+ *				 100	  100 (CPUPRI_HIGHER)
+ */
+static int convert_prio(int prio)
+{
+	int cpupri;
+
+	switch (prio) {
+	case CPUPRI_INVALID:
+		cpupri = CPUPRI_INVALID;	/* -1 */
+		break;
+
+	case 0 ... 98:
+		cpupri = MAX_RT_PRIO-1 - prio;	/* 1 ... 99 */
+		break;
+
+	case MAX_RT_PRIO-1:
+		cpupri = CPUPRI_NORMAL;		/*  0 */
+		break;
+
+	case MAX_RT_PRIO:
+		cpupri = CPUPRI_HIGHER;		/* 100 */
+		break;
+	}
+
+	return cpupri;
+}
+
+static inline int __cpupri_find(struct cpupri *cp, struct task_struct *p,
+				struct cpumask *lowest_mask, int idx)
+{
+	struct cpupri_vec *vec  = &cp->pri_to_cpu[idx];
+	int skip = 0;
+
+	if (!atomic_read(&(vec)->count))
+		skip = 1;
+	/*
+	 * When looking at the vector, we need to read the counter,
+	 * do a memory barrier, then read the mask.
+	 *
+	 * Note: This is still all racy, but we can deal with it.
+	 *  Ideally, we only want to look at masks that are set.
+	 *
+	 *  If a mask is not set, then the only thing wrong is that we
+	 *  did a little more work than necessary.
+	 *
+	 *  If we read a zero count but the mask is set, because of the
+	 *  memory barriers, that can only happen when the highest prio
+	 *  task for a run queue has left the run queue, in which case,
+	 *  it will be followed by a pull. If the task we are processing
+	 *  fails to find a proper place to go, that pull request will
+	 *  pull this task if the run queue is running at a lower
+	 *  priority.
+	 */
+	smp_rmb();
+
+	/* Need to do the rmb for every iteration */
+	if (skip)
+		return 0;
+
+	if (cpumask_any_and(&p->cpus_mask, vec->mask) >= nr_cpu_ids)
+		return 0;
+
+	if (lowest_mask) {
+		cpumask_and(lowest_mask, &p->cpus_mask, vec->mask);
+
+		/*
+		 * We have to ensure that we have at least one bit
+		 * still set in the array, since the map could have
+		 * been concurrently emptied between the first and
+		 * second reads of vec->mask.  If we hit this
+		 * condition, simply act as though we never hit this
+		 * priority level and continue on.
+		 */
+		if (cpumask_empty(lowest_mask))
+			return 0;
+	}
+
+	return 1;
+}
+
+int cpupri_find(struct cpupri *cp, struct task_struct *p,
+		struct cpumask *lowest_mask)
+{
+	return cpupri_find_fitness(cp, p, lowest_mask, NULL);
+}
+
+/**
+ * cpupri_find_fitness - find the best (lowest-pri) CPU in the system
+ * @cp: The cpupri context
+ * @p: The task
+ * @lowest_mask: A mask to fill in with selected CPUs (or NULL)
+ * @fitness_fn: A pointer to a function to do custom checks whether the CPU
+ *              fits a specific criteria so that we only return those CPUs.
+ *
+ * Note: This function returns the recommended CPUs as calculated during the
+ * current invocation.  By the time the call returns, the CPUs may have in
+ * fact changed priorities any number of times.  While not ideal, it is not
+ * an issue of correctness since the normal rebalancer logic will correct
+ * any discrepancies created by racing against the uncertainty of the current
+ * priority configuration.
+ *
+ * Return: (int)bool - CPUs were found
+ */
+int cpupri_find_fitness(struct cpupri *cp, struct task_struct *p,
+		struct cpumask *lowest_mask,
+		bool (*fitness_fn)(struct task_struct *p, int cpu))
+{
+	int task_pri = convert_prio(p->prio);
+	int idx, cpu;
+
+	WARN_ON_ONCE(task_pri >= CPUPRI_NR_PRIORITIES);
+
+	for (idx = 0; idx < task_pri; idx++) {
+
+		if (!__cpupri_find(cp, p, lowest_mask, idx))
+			continue;
+
+		if (!lowest_mask || !fitness_fn)
+			return 1;
+
+		/* Ensure the capacity of the CPUs fit the task */
+		for_each_cpu(cpu, lowest_mask) {
+			if (!fitness_fn(p, cpu))
+				cpumask_clear_cpu(cpu, lowest_mask);
+		}
+
+		/*
+		 * If no CPU at the current priority can fit the task
+		 * continue looking
+		 */
+		if (cpumask_empty(lowest_mask))
+			continue;
+
+		return 1;
+	}
+
+	/*
+	 * If we failed to find a fitting lowest_mask, kick off a new search
+	 * but without taking into account any fitness criteria this time.
+	 *
+	 * This rule favours honouring priority over fitting the task in the
+	 * correct CPU (Capacity Awareness being the only user now).
+	 * The idea is that if a higher priority task can run, then it should
+	 * run even if this ends up being on unfitting CPU.
+	 *
+	 * The cost of this trade-off is not entirely clear and will probably
+	 * be good for some workloads and bad for others.
+	 *
+	 * The main idea here is that if some CPUs were over-committed, we try
+	 * to spread which is what the scheduler traditionally did. Sys admins
+	 * must do proper RT planning to avoid overloading the system if they
+	 * really care.
+	 */
+	if (fitness_fn)
+		return cpupri_find(cp, p, lowest_mask);
+
+	return 0;
+}
+
+/**
+ * cpupri_set - update the CPU priority setting
+ * @cp: The cpupri context
+ * @cpu: The target CPU
+ * @newpri: The priority (INVALID,NORMAL,RT1-RT99,HIGHER) to assign to this CPU
+ *
+ * Note: Assumes cpu_rq(cpu)->lock is locked
+ *
+ * Returns: (void)
+ */
+void cpupri_set(struct cpupri *cp, int cpu, int newpri)
+{
+	int *currpri = &cp->cpu_to_pri[cpu];
+	int oldpri = *currpri;
+	int do_mb = 0;
+
+	newpri = convert_prio(newpri);
+
+	BUG_ON(newpri >= CPUPRI_NR_PRIORITIES);
+
+	if (newpri == oldpri)
+		return;
+
+	/*
+	 * If the CPU was currently mapped to a different value, we
+	 * need to map it to the new value then remove the old value.
+	 * Note, we must add the new value first, otherwise we risk the
+	 * cpu being missed by the priority loop in cpupri_find.
+	 */
+	if (likely(newpri != CPUPRI_INVALID)) {
+		struct cpupri_vec *vec = &cp->pri_to_cpu[newpri];
+
+		cpumask_set_cpu(cpu, vec->mask);
+		/*
+		 * When adding a new vector, we update the mask first,
+		 * do a write memory barrier, and then update the count, to
+		 * make sure the vector is visible when count is set.
+		 */
+		smp_mb__before_atomic();
+		atomic_inc(&(vec)->count);
+		do_mb = 1;
+	}
+	if (likely(oldpri != CPUPRI_INVALID)) {
+		struct cpupri_vec *vec  = &cp->pri_to_cpu[oldpri];
+
+		/*
+		 * Because the order of modification of the vec->count
+		 * is important, we must make sure that the update
+		 * of the new prio is seen before we decrement the
+		 * old prio. This makes sure that the loop sees
+		 * one or the other when we raise the priority of
+		 * the run queue. We don't care about when we lower the
+		 * priority, as that will trigger an rt pull anyway.
+		 *
+		 * We only need to do a memory barrier if we updated
+		 * the new priority vec.
+		 */
+		if (do_mb)
+			smp_mb__after_atomic();
+
+		/*
+		 * When removing from the vector, we decrement the counter first
+		 * do a memory barrier and then clear the mask.
+		 */
+		atomic_dec(&(vec)->count);
+		smp_mb__after_atomic();
+		cpumask_clear_cpu(cpu, vec->mask);
+	}
+
+	*currpri = newpri;
+}
+
+/**
+ * cpupri_init - initialize the cpupri structure
+ * @cp: The cpupri context
+ *
+ * Return: -ENOMEM on memory allocation failure.
+ */
+int cpupri_init(struct cpupri *cp)
+{
+	int i;
+
+	for (i = 0; i < CPUPRI_NR_PRIORITIES; i++) {
+		struct cpupri_vec *vec = &cp->pri_to_cpu[i];
+
+		atomic_set(&vec->count, 0);
+		if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL))
+			goto cleanup;
+	}
+
+	cp->cpu_to_pri = kcalloc(nr_cpu_ids, sizeof(int), GFP_KERNEL);
+	if (!cp->cpu_to_pri)
+		goto cleanup;
+
+	for_each_possible_cpu(i)
+		cp->cpu_to_pri[i] = CPUPRI_INVALID;
+
+	return 0;
+
+cleanup:
+	for (i--; i >= 0; i--)
+		free_cpumask_var(cp->pri_to_cpu[i].mask);
+	return -ENOMEM;
+}
+
+/**
+ * cpupri_cleanup - clean up the cpupri structure
+ * @cp: The cpupri context
+ */
+void cpupri_cleanup(struct cpupri *cp)
+{
+	int i;
+
+	kfree(cp->cpu_to_pri);
+	for (i = 0; i < CPUPRI_NR_PRIORITIES; i++)
+		free_cpumask_var(cp->pri_to_cpu[i].mask);
+}