Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 443 insertions, 0 deletions

diff --git a/lib/zstd/common/zstd_internal.h b/lib/zstd/common/zstd_internal.h
new file mode 100644
index 000000000..93305d9b4
--- /dev/null
+++ b/lib/zstd/common/zstd_internal.h
@@ -0,0 +1,443 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_CCOMMON_H_MODULE
+#define ZSTD_CCOMMON_H_MODULE
+
+/* this module contains definitions which must be identical
+ * across compression, decompression and dictBuilder.
+ * It also contains a few functions useful to at least 2 of them
+ * and which benefit from being inlined */
+
+/*-*************************************
+*  Dependencies
+***************************************/
+#include "compiler.h"
+#include "cpu.h"
+#include "mem.h"
+#include "debug.h"                 /* assert, DEBUGLOG, RAWLOG, g_debuglevel */
+#include "error_private.h"
+#define ZSTD_STATIC_LINKING_ONLY
+#include <linux/zstd.h>
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+#define HUF_STATIC_LINKING_ONLY
+#include "huf.h"
+#include <linux/xxhash.h>                /* XXH_reset, update, digest */
+#define ZSTD_TRACE 0
+
+
+/* ---- static assert (debug) --- */
+#define ZSTD_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)
+#define ZSTD_isError ERR_isError   /* for inlining */
+#define FSE_isError  ERR_isError
+#define HUF_isError  ERR_isError
+
+
+/*-*************************************
+*  shared macros
+***************************************/
+#undef MIN
+#undef MAX
+#define MIN(a,b) ((a)<(b) ? (a) : (b))
+#define MAX(a,b) ((a)>(b) ? (a) : (b))
+#define BOUNDED(min,val,max) (MAX(min,MIN(val,max)))
+
+
+/*-*************************************
+*  Common constants
+***************************************/
+#define ZSTD_OPT_NUM    (1<<12)
+
+#define ZSTD_REP_NUM      3                 /* number of repcodes */
+static UNUSED_ATTR const U32 repStartValue[ZSTD_REP_NUM] = { 1, 4, 8 };
+
+#define KB *(1 <<10)
+#define MB *(1 <<20)
+#define GB *(1U<<30)
+
+#define BIT7 128
+#define BIT6  64
+#define BIT5  32
+#define BIT4  16
+#define BIT1   2
+#define BIT0   1
+
+#define ZSTD_WINDOWLOG_ABSOLUTEMIN 10
+static UNUSED_ATTR const size_t ZSTD_fcs_fieldSize[4] = { 0, 2, 4, 8 };
+static UNUSED_ATTR const size_t ZSTD_did_fieldSize[4] = { 0, 1, 2, 4 };
+
+#define ZSTD_FRAMEIDSIZE 4   /* magic number size */
+
+#define ZSTD_BLOCKHEADERSIZE 3   /* C standard doesn't allow `static const` variable to be init using another `static const` variable */
+static UNUSED_ATTR const size_t ZSTD_blockHeaderSize = ZSTD_BLOCKHEADERSIZE;
+typedef enum { bt_raw, bt_rle, bt_compressed, bt_reserved } blockType_e;
+
+#define ZSTD_FRAMECHECKSUMSIZE 4
+
+#define MIN_SEQUENCES_SIZE 1 /* nbSeq==0 */
+#define MIN_CBLOCK_SIZE (1 /*litCSize*/ + 1 /* RLE or RAW */ + MIN_SEQUENCES_SIZE /* nbSeq==0 */)   /* for a non-null block */
+
+#define HufLog 12
+typedef enum { set_basic, set_rle, set_compressed, set_repeat } symbolEncodingType_e;
+
+#define LONGNBSEQ 0x7F00
+
+#define MINMATCH 3
+
+#define Litbits  8
+#define MaxLit ((1<<Litbits) - 1)
+#define MaxML   52
+#define MaxLL   35
+#define DefaultMaxOff 28
+#define MaxOff  31
+#define MaxSeq MAX(MaxLL, MaxML)   /* Assumption : MaxOff < MaxLL,MaxML */
+#define MLFSELog    9
+#define LLFSELog    9
+#define OffFSELog   8
+#define MaxFSELog  MAX(MAX(MLFSELog, LLFSELog), OffFSELog)
+
+#define ZSTD_MAX_HUF_HEADER_SIZE 128 /* header + <= 127 byte tree description */
+/* Each table cannot take more than #symbols * FSELog bits */
+#define ZSTD_MAX_FSE_HEADERS_SIZE (((MaxML + 1) * MLFSELog + (MaxLL + 1) * LLFSELog + (MaxOff + 1) * OffFSELog + 7) / 8)
+
+static UNUSED_ATTR const U8 LL_bits[MaxLL+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 6, 7, 8, 9,10,11,12,
+    13,14,15,16
+};
+static UNUSED_ATTR const S16 LL_defaultNorm[MaxLL+1] = {
+     4, 3, 2, 2, 2, 2, 2, 2,
+     2, 2, 2, 2, 2, 1, 1, 1,
+     2, 2, 2, 2, 2, 2, 2, 2,
+     2, 3, 2, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1
+};
+#define LL_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 LL_defaultNormLog = LL_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const U8 ML_bits[MaxML+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 4, 5, 7, 8, 9,10,11,
+    12,13,14,15,16
+};
+static UNUSED_ATTR const S16 ML_defaultNorm[MaxML+1] = {
+     1, 4, 3, 2, 2, 2, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1,-1,-1,
+    -1,-1,-1,-1,-1
+};
+#define ML_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 ML_defaultNormLog = ML_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const S16 OF_defaultNorm[DefaultMaxOff+1] = {
+     1, 1, 1, 1, 1, 1, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1,-1
+};
+#define OF_DEFAULTNORMLOG 5  /* for static allocation */
+static UNUSED_ATTR const U32 OF_defaultNormLog = OF_DEFAULTNORMLOG;
+
+
+/*-*******************************************
+*  Shared functions to include for inlining
+*********************************************/
+static void ZSTD_copy8(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+    vst1_u8((uint8_t*)dst, vld1_u8((const uint8_t*)src));
+#else
+    ZSTD_memcpy(dst, src, 8);
+#endif
+}
+#define COPY8(d,s) { ZSTD_copy8(d,s); d+=8; s+=8; }
+
+/* Need to use memmove here since the literal buffer can now be located within
+   the dst buffer. In circumstances where the op "catches up" to where the
+   literal buffer is, there can be partial overlaps in this call on the final
+   copy if the literal is being shifted by less than 16 bytes. */
+static void ZSTD_copy16(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+    vst1q_u8((uint8_t*)dst, vld1q_u8((const uint8_t*)src));
+#elif defined(ZSTD_ARCH_X86_SSE2)
+    _mm_storeu_si128((__m128i*)dst, _mm_loadu_si128((const __m128i*)src));
+#elif defined(__clang__)
+    ZSTD_memmove(dst, src, 16);
+#else
+    /* ZSTD_memmove is not inlined properly by gcc */
+    BYTE copy16_buf[16];
+    ZSTD_memcpy(copy16_buf, src, 16);
+    ZSTD_memcpy(dst, copy16_buf, 16);
+#endif
+}
+#define COPY16(d,s) { ZSTD_copy16(d,s); d+=16; s+=16; }
+
+#define WILDCOPY_OVERLENGTH 32
+#define WILDCOPY_VECLEN 16
+
+typedef enum {
+    ZSTD_no_overlap,
+    ZSTD_overlap_src_before_dst
+    /*  ZSTD_overlap_dst_before_src, */
+} ZSTD_overlap_e;
+
+/*! ZSTD_wildcopy() :
+ *  Custom version of ZSTD_memcpy(), can over read/write up to WILDCOPY_OVERLENGTH bytes (if length==0)
+ *  @param ovtype controls the overlap detection
+ *         - ZSTD_no_overlap: The source and destination are guaranteed to be at least WILDCOPY_VECLEN bytes apart.
+ *         - ZSTD_overlap_src_before_dst: The src and dst may overlap, but they MUST be at least 8 bytes apart.
+ *           The src buffer must be before the dst buffer.
+ */
+MEM_STATIC FORCE_INLINE_ATTR
+void ZSTD_wildcopy(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e const ovtype)
+{
+    ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
+    const BYTE* ip = (const BYTE*)src;
+    BYTE* op = (BYTE*)dst;
+    BYTE* const oend = op + length;
+
+    if (ovtype == ZSTD_overlap_src_before_dst && diff < WILDCOPY_VECLEN) {
+        /* Handle short offset copies. */
+        do {
+            COPY8(op, ip)
+        } while (op < oend);
+    } else {
+        assert(diff >= WILDCOPY_VECLEN || diff <= -WILDCOPY_VECLEN);
+        /* Separate out the first COPY16() call because the copy length is
+         * almost certain to be short, so the branches have different
+         * probabilities. Since it is almost certain to be short, only do
+         * one COPY16() in the first call. Then, do two calls per loop since
+         * at that point it is more likely to have a high trip count.
+         */
+#ifdef __aarch64__
+        do {
+            COPY16(op, ip);
+        }
+        while (op < oend);
+#else
+        ZSTD_copy16(op, ip);
+        if (16 >= length) return;
+        op += 16;
+        ip += 16;
+        do {
+            COPY16(op, ip);
+            COPY16(op, ip);
+        }
+        while (op < oend);
+#endif
+    }
+}
+
+MEM_STATIC size_t ZSTD_limitCopy(void* dst, size_t dstCapacity, const void* src, size_t srcSize)
+{
+    size_t const length = MIN(dstCapacity, srcSize);
+    if (length > 0) {
+        ZSTD_memcpy(dst, src, length);
+    }
+    return length;
+}
+
+/* define "workspace is too large" as this number of times larger than needed */
+#define ZSTD_WORKSPACETOOLARGE_FACTOR 3
+
+/* when workspace is continuously too large
+ * during at least this number of times,
+ * context's memory usage is considered wasteful,
+ * because it's sized to handle a worst case scenario which rarely happens.
+ * In which case, resize it down to free some memory */
+#define ZSTD_WORKSPACETOOLARGE_MAXDURATION 128
+
+/* Controls whether the input/output buffer is buffered or stable. */
+typedef enum {
+    ZSTD_bm_buffered = 0,  /* Buffer the input/output */
+    ZSTD_bm_stable = 1     /* ZSTD_inBuffer/ZSTD_outBuffer is stable */
+} ZSTD_bufferMode_e;
+
+
+/*-*******************************************
+*  Private declarations
+*********************************************/
+typedef struct seqDef_s {
+    U32 offBase;   /* offBase == Offset + ZSTD_REP_NUM, or repcode 1,2,3 */
+    U16 litLength;
+    U16 mlBase;    /* mlBase == matchLength - MINMATCH */
+} seqDef;
+
+/* Controls whether seqStore has a single "long" litLength or matchLength. See seqStore_t. */
+typedef enum {
+    ZSTD_llt_none = 0,             /* no longLengthType */
+    ZSTD_llt_literalLength = 1,    /* represents a long literal */
+    ZSTD_llt_matchLength = 2       /* represents a long match */
+} ZSTD_longLengthType_e;
+
+typedef struct {
+    seqDef* sequencesStart;
+    seqDef* sequences;      /* ptr to end of sequences */
+    BYTE* litStart;
+    BYTE* lit;              /* ptr to end of literals */
+    BYTE* llCode;
+    BYTE* mlCode;
+    BYTE* ofCode;
+    size_t maxNbSeq;
+    size_t maxNbLit;
+
+    /* longLengthPos and longLengthType to allow us to represent either a single litLength or matchLength
+     * in the seqStore that has a value larger than U16 (if it exists). To do so, we increment
+     * the existing value of the litLength or matchLength by 0x10000.
+     */
+    ZSTD_longLengthType_e   longLengthType;
+    U32                     longLengthPos;  /* Index of the sequence to apply long length modification to */
+} seqStore_t;
+
+typedef struct {
+    U32 litLength;
+    U32 matchLength;
+} ZSTD_sequenceLength;
+
+/*
+ * Returns the ZSTD_sequenceLength for the given sequences. It handles the decoding of long sequences
+ * indicated by longLengthPos and longLengthType, and adds MINMATCH back to matchLength.
+ */
+MEM_STATIC ZSTD_sequenceLength ZSTD_getSequenceLength(seqStore_t const* seqStore, seqDef const* seq)
+{
+    ZSTD_sequenceLength seqLen;
+    seqLen.litLength = seq->litLength;
+    seqLen.matchLength = seq->mlBase + MINMATCH;
+    if (seqStore->longLengthPos == (U32)(seq - seqStore->sequencesStart)) {
+        if (seqStore->longLengthType == ZSTD_llt_literalLength) {
+            seqLen.litLength += 0xFFFF;
+        }
+        if (seqStore->longLengthType == ZSTD_llt_matchLength) {
+            seqLen.matchLength += 0xFFFF;
+        }
+    }
+    return seqLen;
+}
+
+/*
+ * Contains the compressed frame size and an upper-bound for the decompressed frame size.
+ * Note: before using `compressedSize`, check for errors using ZSTD_isError().
+ *       similarly, before using `decompressedBound`, check for errors using:
+ *          `decompressedBound != ZSTD_CONTENTSIZE_ERROR`
+ */
+typedef struct {
+    size_t compressedSize;
+    unsigned long long decompressedBound;
+} ZSTD_frameSizeInfo;   /* decompress & legacy */
+
+const seqStore_t* ZSTD_getSeqStore(const ZSTD_CCtx* ctx);   /* compress & dictBuilder */
+void ZSTD_seqToCodes(const seqStore_t* seqStorePtr);   /* compress, dictBuilder, decodeCorpus (shouldn't get its definition from here) */
+
+/* custom memory allocation functions */
+void* ZSTD_customMalloc(size_t size, ZSTD_customMem customMem);
+void* ZSTD_customCalloc(size_t size, ZSTD_customMem customMem);
+void ZSTD_customFree(void* ptr, ZSTD_customMem customMem);
+
+
+MEM_STATIC U32 ZSTD_highbit32(U32 val)   /* compress, dictBuilder, decodeCorpus */
+{
+    assert(val != 0);
+    {
+#   if (__GNUC__ >= 3)   /* GCC Intrinsic */
+        return __builtin_clz (val) ^ 31;
+#   else   /* Software version */
+        static const U32 DeBruijnClz[32] = { 0, 9, 1, 10, 13, 21, 2, 29, 11, 14, 16, 18, 22, 25, 3, 30, 8, 12, 20, 28, 15, 17, 24, 7, 19, 27, 23, 6, 26, 5, 4, 31 };
+        U32 v = val;
+        v |= v >> 1;
+        v |= v >> 2;
+        v |= v >> 4;
+        v |= v >> 8;
+        v |= v >> 16;
+        return DeBruijnClz[(v * 0x07C4ACDDU) >> 27];
+#   endif
+    }
+}
+
+/*
+ * Counts the number of trailing zeros of a `size_t`.
+ * Most compilers should support CTZ as a builtin. A backup
+ * implementation is provided if the builtin isn't supported, but
+ * it may not be terribly efficient.
+ */
+MEM_STATIC unsigned ZSTD_countTrailingZeros(size_t val)
+{
+    if (MEM_64bits()) {
+#       if (__GNUC__ >= 4)
+            return __builtin_ctzll((U64)val);
+#       else
+            static const int DeBruijnBytePos[64] = {  0,  1,  2,  7,  3, 13,  8, 19,
+                                                      4, 25, 14, 28,  9, 34, 20, 56,
+                                                      5, 17, 26, 54, 15, 41, 29, 43,
+                                                      10, 31, 38, 35, 21, 45, 49, 57,
+                                                      63,  6, 12, 18, 24, 27, 33, 55,
+                                                      16, 53, 40, 42, 30, 37, 44, 48,
+                                                      62, 11, 23, 32, 52, 39, 36, 47,
+                                                      61, 22, 51, 46, 60, 50, 59, 58 };
+            return DeBruijnBytePos[((U64)((val & -(long long)val) * 0x0218A392CDABBD3FULL)) >> 58];
+#       endif
+    } else { /* 32 bits */
+#       if (__GNUC__ >= 3)
+            return __builtin_ctz((U32)val);
+#       else
+            static const int DeBruijnBytePos[32] = {  0,  1, 28,  2, 29, 14, 24,  3,
+                                                     30, 22, 20, 15, 25, 17,  4,  8,
+                                                     31, 27, 13, 23, 21, 19, 16,  7,
+                                                     26, 12, 18,  6, 11,  5, 10,  9 };
+            return DeBruijnBytePos[((U32)((val & -(S32)val) * 0x077CB531U)) >> 27];
+#       endif
+    }
+}
+
+
+/* ZSTD_invalidateRepCodes() :
+ * ensures next compression will not use repcodes from previous block.
+ * Note : only works with regular variant;
+ *        do not use with extDict variant ! */
+void ZSTD_invalidateRepCodes(ZSTD_CCtx* cctx);   /* zstdmt, adaptive_compression (shouldn't get this definition from here) */
+
+
+typedef struct {
+    blockType_e blockType;
+    U32 lastBlock;
+    U32 origSize;
+} blockProperties_t;   /* declared here for decompress and fullbench */
+
+/*! ZSTD_getcBlockSize() :
+ *  Provides the size of compressed block from block header `src` */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_getcBlockSize(const void* src, size_t srcSize,
+                          blockProperties_t* bpPtr);
+
+/*! ZSTD_decodeSeqHeaders() :
+ *  decode sequence header from src */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_decodeSeqHeaders(ZSTD_DCtx* dctx, int* nbSeqPtr,
+                       const void* src, size_t srcSize);
+
+/*
+ * @returns true iff the CPU supports dynamic BMI2 dispatch.
+ */
+MEM_STATIC int ZSTD_cpuSupportsBmi2(void)
+{
+    ZSTD_cpuid_t cpuid = ZSTD_cpuid();
+    return ZSTD_cpuid_bmi1(cpuid) && ZSTD_cpuid_bmi2(cpuid);
+}
+
+
+#endif   /* ZSTD_CCOMMON_H_MODULE */