Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 235 insertions, 0 deletions

diff --git a/mm/kmsan/init.c b/mm/kmsan/init.c
new file mode 100644
index 000000000..7fb794242
--- /dev/null
+++ b/mm/kmsan/init.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KMSAN initialization routines.
+ *
+ * Copyright (C) 2017-2021 Google LLC
+ * Author: Alexander Potapenko <glider@google.com>
+ *
+ */
+
+#include "kmsan.h"
+
+#include <asm/sections.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+
+#include "../internal.h"
+
+#define NUM_FUTURE_RANGES 128
+struct start_end_pair {
+	u64 start, end;
+};
+
+static struct start_end_pair start_end_pairs[NUM_FUTURE_RANGES] __initdata;
+static int future_index __initdata;
+
+/*
+ * Record a range of memory for which the metadata pages will be created once
+ * the page allocator becomes available.
+ */
+static void __init kmsan_record_future_shadow_range(void *start, void *end)
+{
+	u64 nstart = (u64)start, nend = (u64)end, cstart, cend;
+	bool merged = false;
+
+	KMSAN_WARN_ON(future_index == NUM_FUTURE_RANGES);
+	KMSAN_WARN_ON((nstart >= nend) || !nstart || !nend);
+	nstart = ALIGN_DOWN(nstart, PAGE_SIZE);
+	nend = ALIGN(nend, PAGE_SIZE);
+
+	/*
+	 * Scan the existing ranges to see if any of them overlaps with
+	 * [start, end). In that case, merge the two ranges instead of
+	 * creating a new one.
+	 * The number of ranges is less than 20, so there is no need to organize
+	 * them into a more intelligent data structure.
+	 */
+	for (int i = 0; i < future_index; i++) {
+		cstart = start_end_pairs[i].start;
+		cend = start_end_pairs[i].end;
+		if ((cstart < nstart && cend < nstart) ||
+		    (cstart > nend && cend > nend))
+			/* ranges are disjoint - do not merge */
+			continue;
+		start_end_pairs[i].start = min(nstart, cstart);
+		start_end_pairs[i].end = max(nend, cend);
+		merged = true;
+		break;
+	}
+	if (merged)
+		return;
+	start_end_pairs[future_index].start = nstart;
+	start_end_pairs[future_index].end = nend;
+	future_index++;
+}
+
+/*
+ * Initialize the shadow for existing mappings during kernel initialization.
+ * These include kernel text/data sections, NODE_DATA and future ranges
+ * registered while creating other data (e.g. percpu).
+ *
+ * Allocations via memblock can be only done before slab is initialized.
+ */
+void __init kmsan_init_shadow(void)
+{
+	const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
+	phys_addr_t p_start, p_end;
+	u64 loop;
+	int nid;
+
+	for_each_reserved_mem_range(loop, &p_start, &p_end)
+		kmsan_record_future_shadow_range(phys_to_virt(p_start),
+						 phys_to_virt(p_end));
+	/* Allocate shadow for .data */
+	kmsan_record_future_shadow_range(_sdata, _edata);
+
+	for_each_online_node(nid)
+		kmsan_record_future_shadow_range(
+			NODE_DATA(nid), (char *)NODE_DATA(nid) + nd_size);
+
+	for (int i = 0; i < future_index; i++)
+		kmsan_init_alloc_meta_for_range(
+			(void *)start_end_pairs[i].start,
+			(void *)start_end_pairs[i].end);
+}
+
+struct metadata_page_pair {
+	struct page *shadow, *origin;
+};
+static struct metadata_page_pair held_back[MAX_ORDER] __initdata;
+
+/*
+ * Eager metadata allocation. When the memblock allocator is freeing pages to
+ * pagealloc, we use 2/3 of them as metadata for the remaining 1/3.
+ * We store the pointers to the returned blocks of pages in held_back[] grouped
+ * by their order: when kmsan_memblock_free_pages() is called for the first
+ * time with a certain order, it is reserved as a shadow block, for the second
+ * time - as an origin block. On the third time the incoming block receives its
+ * shadow and origin ranges from the previously saved shadow and origin blocks,
+ * after which held_back[order] can be used again.
+ *
+ * At the very end there may be leftover blocks in held_back[]. They are
+ * collected later by kmsan_memblock_discard().
+ */
+bool kmsan_memblock_free_pages(struct page *page, unsigned int order)
+{
+	struct page *shadow, *origin;
+
+	if (!held_back[order].shadow) {
+		held_back[order].shadow = page;
+		return false;
+	}
+	if (!held_back[order].origin) {
+		held_back[order].origin = page;
+		return false;
+	}
+	shadow = held_back[order].shadow;
+	origin = held_back[order].origin;
+	kmsan_setup_meta(page, shadow, origin, order);
+
+	held_back[order].shadow = NULL;
+	held_back[order].origin = NULL;
+	return true;
+}
+
+#define MAX_BLOCKS 8
+struct smallstack {
+	struct page *items[MAX_BLOCKS];
+	int index;
+	int order;
+};
+
+static struct smallstack collect = {
+	.index = 0,
+	.order = MAX_ORDER,
+};
+
+static void smallstack_push(struct smallstack *stack, struct page *pages)
+{
+	KMSAN_WARN_ON(stack->index == MAX_BLOCKS);
+	stack->items[stack->index] = pages;
+	stack->index++;
+}
+#undef MAX_BLOCKS
+
+static struct page *smallstack_pop(struct smallstack *stack)
+{
+	struct page *ret;
+
+	KMSAN_WARN_ON(stack->index == 0);
+	stack->index--;
+	ret = stack->items[stack->index];
+	stack->items[stack->index] = NULL;
+	return ret;
+}
+
+static void do_collection(void)
+{
+	struct page *page, *shadow, *origin;
+
+	while (collect.index >= 3) {
+		page = smallstack_pop(&collect);
+		shadow = smallstack_pop(&collect);
+		origin = smallstack_pop(&collect);
+		kmsan_setup_meta(page, shadow, origin, collect.order);
+		__free_pages_core(page, collect.order);
+	}
+}
+
+static void collect_split(void)
+{
+	struct smallstack tmp = {
+		.order = collect.order - 1,
+		.index = 0,
+	};
+	struct page *page;
+
+	if (!collect.order)
+		return;
+	while (collect.index) {
+		page = smallstack_pop(&collect);
+		smallstack_push(&tmp, &page[0]);
+		smallstack_push(&tmp, &page[1 << tmp.order]);
+	}
+	__memcpy(&collect, &tmp, sizeof(tmp));
+}
+
+/*
+ * Memblock is about to go away. Split the page blocks left over in held_back[]
+ * and return 1/3 of that memory to the system.
+ */
+static void kmsan_memblock_discard(void)
+{
+	/*
+	 * For each order=N:
+	 *  - push held_back[N].shadow and .origin to @collect;
+	 *  - while there are >= 3 elements in @collect, do garbage collection:
+	 *    - pop 3 ranges from @collect;
+	 *    - use two of them as shadow and origin for the third one;
+	 *    - repeat;
+	 *  - split each remaining element from @collect into 2 ranges of
+	 *    order=N-1,
+	 *  - repeat.
+	 */
+	collect.order = MAX_ORDER - 1;
+	for (int i = MAX_ORDER - 1; i >= 0; i--) {
+		if (held_back[i].shadow)
+			smallstack_push(&collect, held_back[i].shadow);
+		if (held_back[i].origin)
+			smallstack_push(&collect, held_back[i].origin);
+		held_back[i].shadow = NULL;
+		held_back[i].origin = NULL;
+		do_collection();
+		collect_split();
+	}
+}
+
+void __init kmsan_init_runtime(void)
+{
+	/* Assuming current is init_task */
+	kmsan_internal_task_create(current);
+	kmsan_memblock_discard();
+	pr_info("Starting KernelMemorySanitizer\n");
+	pr_info("ATTENTION: KMSAN is a debugging tool! Do not use it on production machines!\n");
+	kmsan_enabled = true;
+}