Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c
new file mode 100644
index 000000000..7182c5a45
--- /dev/null
+++ b/net/sctp/inqueue.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SCTP kernel implementation
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2002 International Business Machines, Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These functions are the methods for accessing the SCTP inqueue.
+ *
+ * An SCTP inqueue is a queue into which you push SCTP packets
+ * (which might be bundles or fragments of chunks) and out of which you
+ * pop SCTP whole chunks.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <linux-sctp@vger.kernel.org>
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson <karl@athena.chicago.il.us>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <net/sctp/sctp.h>
+#include <net/sctp/sm.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* Initialize an SCTP inqueue.  */
+void sctp_inq_init(struct sctp_inq *queue)
+{
+	INIT_LIST_HEAD(&queue->in_chunk_list);
+	queue->in_progress = NULL;
+
+	/* Create a task for delivering data.  */
+	INIT_WORK(&queue->immediate, NULL);
+}
+
+/* Release the memory associated with an SCTP inqueue.  */
+void sctp_inq_free(struct sctp_inq *queue)
+{
+	struct sctp_chunk *chunk, *tmp;
+
+	/* Empty the queue.  */
+	list_for_each_entry_safe(chunk, tmp, &queue->in_chunk_list, list) {
+		list_del_init(&chunk->list);
+		sctp_chunk_free(chunk);
+	}
+
+	/* If there is a packet which is currently being worked on,
+	 * free it as well.
+	 */
+	if (queue->in_progress) {
+		sctp_chunk_free(queue->in_progress);
+		queue->in_progress = NULL;
+	}
+}
+
+/* Put a new packet in an SCTP inqueue.
+ * We assume that packet->sctp_hdr is set and in host byte order.
+ */
+void sctp_inq_push(struct sctp_inq *q, struct sctp_chunk *chunk)
+{
+	/* Directly call the packet handling routine. */
+	if (chunk->rcvr->dead) {
+		sctp_chunk_free(chunk);
+		return;
+	}
+
+	/* We are now calling this either from the soft interrupt
+	 * or from the backlog processing.
+	 * Eventually, we should clean up inqueue to not rely
+	 * on the BH related data structures.
+	 */
+	list_add_tail(&chunk->list, &q->in_chunk_list);
+	if (chunk->asoc)
+		chunk->asoc->stats.ipackets++;
+	q->immediate.func(&q->immediate);
+}
+
+/* Peek at the next chunk on the inqeue. */
+struct sctp_chunkhdr *sctp_inq_peek(struct sctp_inq *queue)
+{
+	struct sctp_chunk *chunk;
+	struct sctp_chunkhdr *ch = NULL;
+
+	chunk = queue->in_progress;
+	/* If there is no more chunks in this packet, say so */
+	if (chunk->singleton ||
+	    chunk->end_of_packet ||
+	    chunk->pdiscard)
+		    return NULL;
+
+	ch = (struct sctp_chunkhdr *)chunk->chunk_end;
+
+	return ch;
+}
+
+
+/* Extract a chunk from an SCTP inqueue.
+ *
+ * WARNING:  If you need to put the chunk on another queue, you need to
+ * make a shallow copy (clone) of it.
+ */
+struct sctp_chunk *sctp_inq_pop(struct sctp_inq *queue)
+{
+	struct sctp_chunk *chunk;
+	struct sctp_chunkhdr *ch = NULL;
+
+	/* The assumption is that we are safe to process the chunks
+	 * at this time.
+	 */
+
+	chunk = queue->in_progress;
+	if (chunk) {
+		/* There is a packet that we have been working on.
+		 * Any post processing work to do before we move on?
+		 */
+		if (chunk->singleton ||
+		    chunk->end_of_packet ||
+		    chunk->pdiscard) {
+			if (chunk->head_skb == chunk->skb) {
+				chunk->skb = skb_shinfo(chunk->skb)->frag_list;
+				goto new_skb;
+			}
+			if (chunk->skb->next) {
+				chunk->skb = chunk->skb->next;
+				goto new_skb;
+			}
+
+			if (chunk->head_skb)
+				chunk->skb = chunk->head_skb;
+			sctp_chunk_free(chunk);
+			chunk = queue->in_progress = NULL;
+		} else {
+			/* Nothing to do. Next chunk in the packet, please. */
+			ch = (struct sctp_chunkhdr *)chunk->chunk_end;
+			/* Force chunk->skb->data to chunk->chunk_end.  */
+			skb_pull(chunk->skb, chunk->chunk_end - chunk->skb->data);
+			/* We are guaranteed to pull a SCTP header. */
+		}
+	}
+
+	/* Do we need to take the next packet out of the queue to process? */
+	if (!chunk) {
+		struct list_head *entry;
+
+next_chunk:
+		/* Is the queue empty?  */
+		entry = sctp_list_dequeue(&queue->in_chunk_list);
+		if (!entry)
+			return NULL;
+
+		chunk = list_entry(entry, struct sctp_chunk, list);
+
+		if (skb_is_gso(chunk->skb) && skb_is_gso_sctp(chunk->skb)) {
+			/* GSO-marked skbs but without frags, handle
+			 * them normally
+			 */
+			if (skb_shinfo(chunk->skb)->frag_list)
+				chunk->head_skb = chunk->skb;
+
+			/* skbs with "cover letter" */
+			if (chunk->head_skb && chunk->skb->data_len == chunk->skb->len)
+				chunk->skb = skb_shinfo(chunk->skb)->frag_list;
+
+			if (WARN_ON(!chunk->skb)) {
+				__SCTP_INC_STATS(dev_net(chunk->skb->dev), SCTP_MIB_IN_PKT_DISCARDS);
+				sctp_chunk_free(chunk);
+				goto next_chunk;
+			}
+		}
+
+		if (chunk->asoc)
+			sock_rps_save_rxhash(chunk->asoc->base.sk, chunk->skb);
+
+		queue->in_progress = chunk;
+
+new_skb:
+		/* This is the first chunk in the packet.  */
+		ch = (struct sctp_chunkhdr *)chunk->skb->data;
+		chunk->singleton = 1;
+		chunk->data_accepted = 0;
+		chunk->pdiscard = 0;
+		chunk->auth = 0;
+		chunk->has_asconf = 0;
+		chunk->end_of_packet = 0;
+		if (chunk->head_skb) {
+			struct sctp_input_cb
+				*cb = SCTP_INPUT_CB(chunk->skb),
+				*head_cb = SCTP_INPUT_CB(chunk->head_skb);
+
+			cb->chunk = head_cb->chunk;
+			cb->af = head_cb->af;
+		}
+	}
+
+	chunk->chunk_hdr = ch;
+	chunk->chunk_end = ((__u8 *)ch) + SCTP_PAD4(ntohs(ch->length));
+	skb_pull(chunk->skb, sizeof(*ch));
+	chunk->subh.v = NULL; /* Subheader is no longer valid.  */
+
+	if (chunk->chunk_end + sizeof(*ch) <= skb_tail_pointer(chunk->skb)) {
+		/* This is not a singleton */
+		chunk->singleton = 0;
+	} else if (chunk->chunk_end > skb_tail_pointer(chunk->skb)) {
+		/* Discard inside state machine. */
+		chunk->pdiscard = 1;
+		chunk->chunk_end = skb_tail_pointer(chunk->skb);
+	} else {
+		/* We are at the end of the packet, so mark the chunk
+		 * in case we need to send a SACK.
+		 */
+		chunk->end_of_packet = 1;
+	}
+
+	pr_debug("+++sctp_inq_pop+++ chunk:%p[%s], length:%d, skb->len:%d\n",
+		 chunk, sctp_cname(SCTP_ST_CHUNK(chunk->chunk_hdr->type)),
+		 ntohs(chunk->chunk_hdr->length), chunk->skb->len);
+
+	return chunk;
+}
+
+/* Set a top-half handler.
+ *
+ * Originally, we the top-half handler was scheduled as a BH.  We now
+ * call the handler directly in sctp_inq_push() at a time that
+ * we know we are lock safe.
+ * The intent is that this routine will pull stuff out of the
+ * inqueue and process it.
+ */
+void sctp_inq_set_th_handler(struct sctp_inq *q, work_func_t callback)
+{
+	INIT_WORK(&q->immediate, callback);
+}