Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 163 insertions, 0 deletions

diff --git a/rust/kernel/std_vendor.rs b/rust/kernel/std_vendor.rs
new file mode 100644
index 000000000..b3e68b24a
--- /dev/null
+++ b/rust/kernel/std_vendor.rs
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: Apache-2.0 OR MIT
+
+//! The contents of this file come from the Rust standard library, hosted in
+//! the <https://github.com/rust-lang/rust> repository, licensed under
+//! "Apache-2.0 OR MIT" and adapted for kernel use. For copyright details,
+//! see <https://github.com/rust-lang/rust/blob/master/COPYRIGHT>.
+
+/// [`std::dbg`], but using [`pr_info`] instead of [`eprintln`].
+///
+/// Prints and returns the value of a given expression for quick and dirty
+/// debugging.
+///
+/// An example:
+///
+/// ```rust
+/// let a = 2;
+/// # #[allow(clippy::dbg_macro)]
+/// let b = dbg!(a * 2) + 1;
+/// //      ^-- prints: [src/main.rs:2] a * 2 = 4
+/// assert_eq!(b, 5);
+/// ```
+///
+/// The macro works by using the `Debug` implementation of the type of
+/// the given expression to print the value with [`printk`] along with the
+/// source location of the macro invocation as well as the source code
+/// of the expression.
+///
+/// Invoking the macro on an expression moves and takes ownership of it
+/// before returning the evaluated expression unchanged. If the type
+/// of the expression does not implement `Copy` and you don't want
+/// to give up ownership, you can instead borrow with `dbg!(&expr)`
+/// for some expression `expr`.
+///
+/// The `dbg!` macro works exactly the same in release builds.
+/// This is useful when debugging issues that only occur in release
+/// builds or when debugging in release mode is significantly faster.
+///
+/// Note that the macro is intended as a temporary debugging tool to be
+/// used during development. Therefore, avoid committing `dbg!` macro
+/// invocations into the kernel tree.
+///
+/// For debug output that is intended to be kept in the kernel tree,
+/// use [`pr_debug`] and similar facilities instead.
+///
+/// # Stability
+///
+/// The exact output printed by this macro should not be relied upon
+/// and is subject to future changes.
+///
+/// # Further examples
+///
+/// With a method call:
+///
+/// ```rust
+/// # #[allow(clippy::dbg_macro)]
+/// fn foo(n: usize) {
+///     if dbg!(n.checked_sub(4)).is_some() {
+///         // ...
+///     }
+/// }
+///
+/// foo(3)
+/// ```
+///
+/// This prints to the kernel log:
+///
+/// ```text,ignore
+/// [src/main.rs:4] n.checked_sub(4) = None
+/// ```
+///
+/// Naive factorial implementation:
+///
+/// ```rust
+/// # #[allow(clippy::dbg_macro)]
+/// # {
+/// fn factorial(n: u32) -> u32 {
+///     if dbg!(n <= 1) {
+///         dbg!(1)
+///     } else {
+///         dbg!(n * factorial(n - 1))
+///     }
+/// }
+///
+/// dbg!(factorial(4));
+/// # }
+/// ```
+///
+/// This prints to the kernel log:
+///
+/// ```text,ignore
+/// [src/main.rs:3] n <= 1 = false
+/// [src/main.rs:3] n <= 1 = false
+/// [src/main.rs:3] n <= 1 = false
+/// [src/main.rs:3] n <= 1 = true
+/// [src/main.rs:4] 1 = 1
+/// [src/main.rs:5] n * factorial(n - 1) = 2
+/// [src/main.rs:5] n * factorial(n - 1) = 6
+/// [src/main.rs:5] n * factorial(n - 1) = 24
+/// [src/main.rs:11] factorial(4) = 24
+/// ```
+///
+/// The `dbg!(..)` macro moves the input:
+///
+/// ```ignore
+/// /// A wrapper around `usize` which importantly is not Copyable.
+/// #[derive(Debug)]
+/// struct NoCopy(usize);
+///
+/// let a = NoCopy(42);
+/// let _ = dbg!(a); // <-- `a` is moved here.
+/// let _ = dbg!(a); // <-- `a` is moved again; error!
+/// ```
+///
+/// You can also use `dbg!()` without a value to just print the
+/// file and line whenever it's reached.
+///
+/// Finally, if you want to `dbg!(..)` multiple values, it will treat them as
+/// a tuple (and return it, too):
+///
+/// ```
+/// # #[allow(clippy::dbg_macro)]
+/// assert_eq!(dbg!(1usize, 2u32), (1, 2));
+/// ```
+///
+/// However, a single argument with a trailing comma will still not be treated
+/// as a tuple, following the convention of ignoring trailing commas in macro
+/// invocations. You can use a 1-tuple directly if you need one:
+///
+/// ```
+/// # #[allow(clippy::dbg_macro)]
+/// # {
+/// assert_eq!(1, dbg!(1u32,)); // trailing comma ignored
+/// assert_eq!((1,), dbg!((1u32,))); // 1-tuple
+/// # }
+/// ```
+///
+/// [`std::dbg`]: https://doc.rust-lang.org/std/macro.dbg.html
+/// [`eprintln`]: https://doc.rust-lang.org/std/macro.eprintln.html
+/// [`printk`]: https://www.kernel.org/doc/html/latest/core-api/printk-basics.html
+#[macro_export]
+macro_rules! dbg {
+    // NOTE: We cannot use `concat!` to make a static string as a format argument
+    // of `pr_info!` because `file!` could contain a `{` or
+    // `$val` expression could be a block (`{ .. }`), in which case the `pr_info!`
+    // will be malformed.
+    () => {
+        $crate::pr_info!("[{}:{}]\n", ::core::file!(), ::core::line!())
+    };
+    ($val:expr $(,)?) => {
+        // Use of `match` here is intentional because it affects the lifetimes
+        // of temporaries - https://stackoverflow.com/a/48732525/1063961
+        match $val {
+            tmp => {
+                $crate::pr_info!("[{}:{}] {} = {:#?}\n",
+                    ::core::file!(), ::core::line!(), ::core::stringify!($val), &tmp);
+                tmp
+            }
+        }
+    };
+    ($($val:expr),+ $(,)?) => {
+        ($($crate::dbg!($val)),+,)
+    };
+}