Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 177 insertions, 0 deletions

diff --git a/samples/bpf/test_cgrp2_attach.c b/samples/bpf/test_cgrp2_attach.c
new file mode 100644
index 000000000..68ce69457
--- /dev/null
+++ b/samples/bpf/test_cgrp2_attach.c
@@ -0,0 +1,177 @@
+/* eBPF example program:
+ *
+ * - Creates arraymap in kernel with 4 bytes keys and 8 byte values
+ *
+ * - Loads eBPF program
+ *
+ *   The eBPF program accesses the map passed in to store two pieces of
+ *   information. The number of invocations of the program, which maps
+ *   to the number of packets received, is stored to key 0. Key 1 is
+ *   incremented on each iteration by the number of bytes stored in
+ *   the skb.
+ *
+ * - Attaches the new program to a cgroup using BPF_PROG_ATTACH
+ *
+ * - Every second, reads map[0] and map[1] to see how many bytes and
+ *   packets were seen on any socket of tasks in the given cgroup.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <string.h>
+#include <unistd.h>
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+
+#include "bpf_insn.h"
+#include "bpf_util.h"
+
+enum {
+	MAP_KEY_PACKETS,
+	MAP_KEY_BYTES,
+};
+
+char bpf_log_buf[BPF_LOG_BUF_SIZE];
+
+static int prog_load(int map_fd, int verdict)
+{
+	struct bpf_insn prog[] = {
+		BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), /* save r6 so it's not clobbered by BPF_CALL */
+
+		/* Count packets */
+		BPF_MOV64_IMM(BPF_REG_0, MAP_KEY_PACKETS), /* r0 = 0 */
+		BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -4), /* *(u32 *)(fp - 4) = r0 */
+		BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), /* r2 = fp - 4 */
+		BPF_LD_MAP_FD(BPF_REG_1, map_fd), /* load map fd to r1 */
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+		BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
+		BPF_MOV64_IMM(BPF_REG_1, 1), /* r1 = 1 */
+		BPF_ATOMIC_OP(BPF_DW, BPF_ADD, BPF_REG_0, BPF_REG_1, 0),
+
+		/* Count bytes */
+		BPF_MOV64_IMM(BPF_REG_0, MAP_KEY_BYTES), /* r0 = 1 */
+		BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -4), /* *(u32 *)(fp - 4) = r0 */
+		BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), /* r2 = fp - 4 */
+		BPF_LD_MAP_FD(BPF_REG_1, map_fd),
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+		BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_6, offsetof(struct __sk_buff, len)), /* r1 = skb->len */
+
+		BPF_ATOMIC_OP(BPF_DW, BPF_ADD, BPF_REG_0, BPF_REG_1, 0),
+
+		BPF_MOV64_IMM(BPF_REG_0, verdict), /* r0 = verdict */
+		BPF_EXIT_INSN(),
+	};
+	size_t insns_cnt = ARRAY_SIZE(prog);
+	LIBBPF_OPTS(bpf_prog_load_opts, opts,
+		.log_buf = bpf_log_buf,
+		.log_size = BPF_LOG_BUF_SIZE,
+	);
+
+	return bpf_prog_load(BPF_PROG_TYPE_CGROUP_SKB, NULL, "GPL",
+			     prog, insns_cnt, &opts);
+}
+
+static int usage(const char *argv0)
+{
+	printf("Usage: %s [-d] [-D] <cg-path> <egress|ingress>\n", argv0);
+	printf("	-d	Drop Traffic\n");
+	printf("	-D	Detach filter, and exit\n");
+	return EXIT_FAILURE;
+}
+
+static int attach_filter(int cg_fd, int type, int verdict)
+{
+	int prog_fd, map_fd, ret, key;
+	long long pkt_cnt, byte_cnt;
+
+	map_fd = bpf_map_create(BPF_MAP_TYPE_ARRAY, NULL,
+				sizeof(key), sizeof(byte_cnt),
+				256, NULL);
+	if (map_fd < 0) {
+		printf("Failed to create map: '%s'\n", strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	prog_fd = prog_load(map_fd, verdict);
+	printf("Output from kernel verifier:\n%s\n-------\n", bpf_log_buf);
+
+	if (prog_fd < 0) {
+		printf("Failed to load prog: '%s'\n", strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	ret = bpf_prog_attach(prog_fd, cg_fd, type, 0);
+	if (ret < 0) {
+		printf("Failed to attach prog to cgroup: '%s'\n",
+		       strerror(errno));
+		return EXIT_FAILURE;
+	}
+	while (1) {
+		key = MAP_KEY_PACKETS;
+		assert(bpf_map_lookup_elem(map_fd, &key, &pkt_cnt) == 0);
+
+		key = MAP_KEY_BYTES;
+		assert(bpf_map_lookup_elem(map_fd, &key, &byte_cnt) == 0);
+
+		printf("cgroup received %lld packets, %lld bytes\n",
+		       pkt_cnt, byte_cnt);
+		sleep(1);
+	}
+
+	return EXIT_SUCCESS;
+}
+
+int main(int argc, char **argv)
+{
+	int detach_only = 0, verdict = 1;
+	enum bpf_attach_type type;
+	int opt, cg_fd, ret;
+
+	while ((opt = getopt(argc, argv, "Dd")) != -1) {
+		switch (opt) {
+		case 'd':
+			verdict = 0;
+			break;
+		case 'D':
+			detach_only = 1;
+			break;
+		default:
+			return usage(argv[0]);
+		}
+	}
+
+	if (argc - optind < 2)
+		return usage(argv[0]);
+
+	if (strcmp(argv[optind + 1], "ingress") == 0)
+		type = BPF_CGROUP_INET_INGRESS;
+	else if (strcmp(argv[optind + 1], "egress") == 0)
+		type = BPF_CGROUP_INET_EGRESS;
+	else
+		return usage(argv[0]);
+
+	cg_fd = open(argv[optind], O_DIRECTORY | O_RDONLY);
+	if (cg_fd < 0) {
+		printf("Failed to open cgroup path: '%s'\n", strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	if (detach_only) {
+		ret = bpf_prog_detach(cg_fd, type);
+		printf("bpf_prog_detach() returned '%s' (%d)\n",
+		       strerror(errno), errno);
+	} else
+		ret = attach_filter(cg_fd, type, verdict);
+
+	return ret;
+}