Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 597 insertions, 0 deletions

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
new file mode 100644
index 000000000..4a4a5f67c
--- /dev/null
+++ b/scripts/Makefile.lib
@@ -0,0 +1,597 @@
+# SPDX-License-Identifier: GPL-2.0
+# Backward compatibility
+asflags-y  += $(EXTRA_AFLAGS)
+ccflags-y  += $(EXTRA_CFLAGS)
+cppflags-y += $(EXTRA_CPPFLAGS)
+ldflags-y  += $(EXTRA_LDFLAGS)
+
+# flags that take effect in current and sub directories
+KBUILD_AFLAGS += $(subdir-asflags-y)
+KBUILD_CFLAGS += $(subdir-ccflags-y)
+KBUILD_RUSTFLAGS += $(subdir-rustflags-y)
+
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
+# When an object is listed to be built compiled-in and modular,
+# only build the compiled-in version
+obj-m := $(filter-out $(obj-y),$(obj-m))
+
+# Libraries are always collected in one lib file.
+# Filter out objects already built-in
+lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
+
+# Subdirectories we need to descend into
+subdir-ym := $(sort $(subdir-y) $(subdir-m) \
+			$(patsubst %/,%, $(filter %/, $(obj-y) $(obj-m))))
+
+# Handle objects in subdirs:
+# - If we encounter foo/ in $(obj-y), replace it by foo/built-in.a and
+#   foo/modules.order
+# - If we encounter foo/ in $(obj-m), replace it by foo/modules.order
+#
+# Generate modules.order to determine modorder. Unfortunately, we don't have
+# information about ordering between -y and -m subdirs. Just put -y's first.
+
+ifdef need-modorder
+obj-m := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m))
+else
+obj-m := $(filter-out %/, $(obj-m))
+endif
+
+ifdef need-builtin
+obj-y		:= $(patsubst %/, %/built-in.a, $(obj-y))
+else
+obj-y		:= $(filter-out %/, $(obj-y))
+endif
+
+# Expand $(foo-objs) $(foo-y) etc. by replacing their individuals
+suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s))))
+# List composite targets that are constructed by combining other targets
+multi-search = $(sort $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $m)))
+# List primitive targets that are compiled from source files
+real-search = $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $(call suffix-search, $m, $2, $3), $m))
+
+# If $(foo-objs), $(foo-y), $(foo-m), or $(foo-) exists, foo.o is a composite object
+multi-obj-y := $(call multi-search, $(obj-y), .o, -objs -y)
+multi-obj-m := $(call multi-search, $(obj-m), .o, -objs -y -m)
+multi-obj-ym := $(multi-obj-y) $(multi-obj-m)
+
+# Replace multi-part objects by their individual parts,
+# including built-in.a from subdirectories
+real-obj-y := $(call real-search, $(obj-y), .o, -objs -y)
+real-obj-m := $(call real-search, $(obj-m), .o, -objs -y -m)
+
+always-y += $(always-m)
+
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m)
+
+# userprogs-always-y is likewise.
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(userprogs-always-y) $(userprogs-always-m)
+
+# DTB
+# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
+dtb-$(CONFIG_OF_ALL_DTBS)       += $(dtb-)
+
+# Composite DTB (i.e. DTB constructed by overlay)
+multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs)
+# Primitive DTB compiled from *.dts
+real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs)
+# Base DTB that overlay is applied onto (each first word of $(*-dtbs) expansion)
+base-dtb-y := $(foreach m, $(multi-dtb-y), $(firstword $(call suffix-search, $m, .dtb, -dtbs)))
+
+always-y			+= $(dtb-y)
+
+# Add subdir path
+
+ifneq ($(obj),.)
+extra-y		:= $(addprefix $(obj)/,$(extra-y))
+always-y	:= $(addprefix $(obj)/,$(always-y))
+targets		:= $(addprefix $(obj)/,$(targets))
+obj-m		:= $(addprefix $(obj)/,$(obj-m))
+lib-y		:= $(addprefix $(obj)/,$(lib-y))
+real-obj-y	:= $(addprefix $(obj)/,$(real-obj-y))
+real-obj-m	:= $(addprefix $(obj)/,$(real-obj-m))
+multi-obj-m	:= $(addprefix $(obj)/, $(multi-obj-m))
+multi-dtb-y	:= $(addprefix $(obj)/, $(multi-dtb-y))
+real-dtb-y	:= $(addprefix $(obj)/, $(real-dtb-y))
+subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
+endif
+
+# Finds the multi-part object the current object will be linked into.
+# If the object belongs to two or more multi-part objects, list them all.
+modname-multi = $(sort $(foreach m,$(multi-obj-ym),\
+		$(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=))))
+
+__modname = $(or $(modname-multi),$(basetarget))
+
+modname = $(subst $(space),:,$(__modname))
+modfile = $(addprefix $(obj)/,$(__modname))
+
+# target with $(obj)/ and its suffix stripped
+target-stem = $(basename $(patsubst $(obj)/%,%,$@))
+
+# These flags are needed for modversions and compiling, so we define them here
+# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
+# end up in (or would, if it gets compiled in)
+name-fix-token = $(subst $(comma),_,$(subst -,_,$1))
+name-fix = $(call stringify,$(call name-fix-token,$1))
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \
+		 -D__KBUILD_MODNAME=kmod_$(call name-fix-token,$(modname))
+modfile_flags  = -DKBUILD_MODFILE=$(call stringify,$(modfile))
+
+_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \
+                     $(filter-out $(ccflags-remove-y), \
+                         $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \
+                     $(CFLAGS_$(target-stem).o))
+_rust_flags    = $(filter-out $(RUSTFLAGS_REMOVE_$(target-stem).o), \
+                     $(filter-out $(rustflags-remove-y), \
+                         $(KBUILD_RUSTFLAGS) $(rustflags-y)) \
+                     $(RUSTFLAGS_$(target-stem).o))
+_a_flags       = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \
+                     $(filter-out $(asflags-remove-y), \
+                         $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \
+                     $(AFLAGS_$(target-stem).o))
+_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(target-stem).lds)
+
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+		$(CFLAGS_GCOV))
+endif
+
+#
+# Enable address sanitizer flags for kernel except some files or directories
+# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
+#
+ifeq ($(CONFIG_KASAN),y)
+ifneq ($(CONFIG_KASAN_HW_TAGS),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
+		$(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
+endif
+endif
+
+ifeq ($(CONFIG_KMSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(KMSAN_SANITIZE_$(basetarget).o)$(KMSAN_SANITIZE)y), \
+		$(CFLAGS_KMSAN))
+_c_flags += $(if $(patsubst n%,, \
+		$(KMSAN_ENABLE_CHECKS_$(basetarget).o)$(KMSAN_ENABLE_CHECKS)y), \
+		, -mllvm -msan-disable-checks=1)
+endif
+
+ifeq ($(CONFIG_UBSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
+		$(CFLAGS_UBSAN))
+endif
+
+ifeq ($(CONFIG_KCOV),y)
+_c_flags += $(if $(patsubst n%,, \
+	$(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
+	$(CFLAGS_KCOV))
+endif
+
+#
+# Enable KCSAN flags except some files or directories we don't want to check
+# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE)
+#
+ifeq ($(CONFIG_KCSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+	$(KCSAN_SANITIZE_$(basetarget).o)$(KCSAN_SANITIZE)y), \
+	$(CFLAGS_KCSAN))
+# Some uninstrumented files provide implied barriers required to avoid false
+# positives: set KCSAN_INSTRUMENT_BARRIERS for barrier instrumentation only.
+_c_flags += $(if $(patsubst n%,, \
+	$(KCSAN_INSTRUMENT_BARRIERS_$(basetarget).o)$(KCSAN_INSTRUMENT_BARRIERS)n), \
+	-D__KCSAN_INSTRUMENT_BARRIERS__)
+endif
+
+# $(srctree)/$(src) for including checkin headers from generated source files
+# $(objtree)/$(obj) for including generated headers from checkin source files
+ifeq ($(KBUILD_EXTMOD),)
+ifdef building_out_of_srctree
+_c_flags   += -I $(srctree)/$(src) -I $(objtree)/$(obj)
+_a_flags   += -I $(srctree)/$(src) -I $(objtree)/$(obj)
+_cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
+endif
+endif
+
+part-of-module = $(if $(filter $(basename $@).o, $(real-obj-m)),y)
+quiet_modtag = $(if $(part-of-module),[M],   )
+
+modkern_cflags =                                          \
+	$(if $(part-of-module),                           \
+		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
+		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags))
+
+modkern_rustflags =                                              \
+	$(if $(part-of-module),                                   \
+		$(KBUILD_RUSTFLAGS_MODULE) $(RUSTFLAGS_MODULE), \
+		$(KBUILD_RUSTFLAGS_KERNEL) $(RUSTFLAGS_KERNEL))
+
+modkern_aflags = $(if $(part-of-module),				\
+			$(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE),	\
+			$(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL))
+
+c_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 -include $(srctree)/include/linux/compiler_types.h       \
+		 $(_c_flags) $(modkern_cflags)                           \
+		 $(basename_flags) $(modname_flags)
+
+rust_flags     = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg
+
+a_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 $(_a_flags) $(modkern_aflags)
+
+cpp_flags      = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 $(_cpp_flags)
+
+ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
+
+DTC_INCLUDE    := $(srctree)/scripts/dtc/include-prefixes
+
+dtc_cpp_flags  = -Wp,-MMD,$(depfile).pre.tmp -nostdinc                    \
+		 $(addprefix -I,$(DTC_INCLUDE))                          \
+		 -undef -D__DTS__
+
+ifdef CONFIG_OBJTOOL
+
+objtool := $(objtree)/tools/objtool/objtool
+
+objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK)		+= --hacks=jump_label
+objtool-args-$(CONFIG_HAVE_NOINSTR_HACK)		+= --hacks=noinstr
+objtool-args-$(CONFIG_CALL_DEPTH_TRACKING)		+= --hacks=skylake
+objtool-args-$(CONFIG_X86_KERNEL_IBT)			+= --ibt
+objtool-args-$(CONFIG_FINEIBT)				+= --cfi
+objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL)	+= --mcount
+ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
+objtool-args-$(CONFIG_HAVE_OBJTOOL_NOP_MCOUNT)		+= --mnop
+endif
+objtool-args-$(CONFIG_UNWINDER_ORC)			+= --orc
+objtool-args-$(CONFIG_RETPOLINE)			+= --retpoline
+objtool-args-$(CONFIG_RETHUNK)				+= --rethunk
+objtool-args-$(CONFIG_SLS)				+= --sls
+objtool-args-$(CONFIG_STACK_VALIDATION)			+= --stackval
+objtool-args-$(CONFIG_HAVE_STATIC_CALL_INLINE)		+= --static-call
+objtool-args-$(CONFIG_HAVE_UACCESS_VALIDATION)		+= --uaccess
+objtool-args-$(CONFIG_GCOV_KERNEL)			+= --no-unreachable
+objtool-args-$(CONFIG_PREFIX_SYMBOLS)			+= --prefix=$(CONFIG_FUNCTION_PADDING_BYTES)
+
+objtool-args = $(objtool-args-y)					\
+	$(if $(delay-objtool), --link)					\
+	$(if $(part-of-module), --module)
+
+delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT))
+
+cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool-args) $@)
+cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd)
+
+endif # CONFIG_OBJTOOL
+
+# Useful for describing the dependency of composite objects
+# Usage:
+#   $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $1, \
+	$(eval $m: \
+	$(addprefix $(obj)/, $(call suffix-search, $(patsubst $(obj)/%,%,$m), $2, $3))))
+endef
+
+# Copy a file
+# ===========================================================================
+# 'cp' preserves permissions. If you use it to copy a file in read-only srctree,
+# the copy would be read-only as well, leading to an error when executing the
+# rule next time. Use 'cat' instead in order to generate a writable file.
+quiet_cmd_copy = COPY    $@
+      cmd_copy = cat $< > $@
+
+$(obj)/%: $(src)/%_shipped
+	$(call cmd,copy)
+
+# Commands useful for building a boot image
+# ===========================================================================
+#
+#	Use as following:
+#
+#	target: source(s) FORCE
+#		$(if_changed,ld/objcopy/gzip)
+#
+#	and add target to 'targets' so that we know we have to
+#	read in the saved command line
+
+# Linking
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ld = LD      $@
+      cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@
+
+# Archive
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ar = AR      $@
+      cmd_ar = rm -f $@; $(AR) cDPrsT $@ $(real-prereqs)
+
+# Objcopy
+# ---------------------------------------------------------------------------
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Gzip
+# ---------------------------------------------------------------------------
+
+quiet_cmd_gzip = GZIP    $@
+      cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@
+
+# DTC
+# ---------------------------------------------------------------------------
+DTC ?= $(objtree)/scripts/dtc/dtc
+DTC_FLAGS += -Wno-interrupt_provider \
+	-Wno-unique_unit_address
+
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+	-Wno-avoid_unnecessary_addr_size \
+	-Wno-alias_paths \
+	-Wno-graph_child_address \
+	-Wno-simple_bus_reg
+else
+DTC_FLAGS += \
+        -Wunique_unit_address_if_enabled
+endif
+
+ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+	-Wproperty_name_chars_strict \
+	-Winterrupt_provider \
+	-Wunique_unit_address
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
+
+# Set -@ if the target is a base DTB that overlay is applied onto
+DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@)
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtb= DTBS    $@
+cmd_dt_S_dtb=						\
+{							\
+	echo '\#include <asm-generic/vmlinux.lds.h>'; 	\
+	echo '.section .dtb.init.rodata,"a"';		\
+	echo '.balign STRUCT_ALIGNMENT';		\
+	echo '.global __dtb_$(subst -,_,$(*F))_begin';	\
+	echo '__dtb_$(subst -,_,$(*F))_begin:';		\
+	echo '.incbin "$<" ';				\
+	echo '__dtb_$(subst -,_,$(*F))_end:';		\
+	echo '.global __dtb_$(subst -,_,$(*F))_end';	\
+	echo '.balign STRUCT_ALIGNMENT'; 		\
+} > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
+	$(call if_changed,dt_S_dtb)
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtbo= DTBOS   $@
+cmd_dt_S_dtbo=						\
+{							\
+	echo '\#include <asm-generic/vmlinux.lds.h>';	\
+	echo '.section .dtb.init.rodata,"a"';		\
+	echo '.balign STRUCT_ALIGNMENT';		\
+	echo '.global __dtbo_$(subst -,_,$(*F))_begin';	\
+	echo '__dtbo_$(subst -,_,$(*F))_begin:';	\
+	echo '.incbin "$<" ';				\
+	echo '__dtbo_$(subst -,_,$(*F))_end:';		\
+	echo '.global __dtbo_$(subst -,_,$(*F))_end';	\
+	echo '.balign STRUCT_ALIGNMENT';		\
+} > $@
+
+$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE
+	$(call if_changed,dt_S_dtbo)
+
+quiet_cmd_dtc = DTC     $@
+cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+	$(DTC) -o $@ -b 0 \
+		$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
+		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+quiet_cmd_fdtoverlay = DTOVL   $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
+
+$(multi-dtb-y): FORCE
+	$(call if_changed,fdtoverlay)
+$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs)
+
+ifneq ($(CHECK_DTBS)$(CHECK_DT_BINDING),)
+DT_CHECKER ?= dt-validate
+DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m)
+DT_BINDING_DIR := Documentation/devicetree/bindings
+DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json
+
+quiet_cmd_dtb =	DTC_CHK $@
+      cmd_dtb =	$(cmd_dtc) ; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true
+else
+quiet_cmd_dtb = $(quiet_cmd_dtc)
+      cmd_dtb = $(cmd_dtc)
+endif
+
+$(obj)/%.dtb: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
+	$(call if_changed_dep,dtb)
+
+$(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
+	$(call if_changed_dep,dtc)
+
+$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
+	$(call if_changed_dep,dtc)
+
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+# Bzip2
+# ---------------------------------------------------------------------------
+
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = printf $(shell						\
+dec_size=0;								\
+for F in $(real-prereqs); do					\
+	fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F);	\
+	dec_size=$$(expr $$dec_size + $$fsize);				\
+done;									\
+printf "%08x\n" $$dec_size |						\
+	sed 's/\(..\)/\1 /g' | {					\
+		read ch0 ch1 ch2 ch3;					\
+		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
+			printf '%s%03o' '\\' $$((0x$$ch)); 		\
+		done;							\
+	}								\
+)
+
+quiet_cmd_file_size = GEN     $@
+      cmd_file_size = $(size_append) > $@
+
+quiet_cmd_bzip2 = BZIP2   $@
+      cmd_bzip2 = cat $(real-prereqs) | $(KBZIP2) -9 > $@
+
+quiet_cmd_bzip2_with_size = BZIP2   $@
+      cmd_bzip2_with_size = { cat $(real-prereqs) | $(KBZIP2) -9; $(size_append); } > $@
+
+# Lzma
+# ---------------------------------------------------------------------------
+
+quiet_cmd_lzma = LZMA    $@
+      cmd_lzma = cat $(real-prereqs) | $(LZMA) -9 > $@
+
+quiet_cmd_lzma_with_size = LZMA    $@
+      cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
+
+quiet_cmd_lzo = LZO     $@
+      cmd_lzo = cat $(real-prereqs) | $(KLZOP) -9 > $@
+
+quiet_cmd_lzo_with_size = LZO     $@
+      cmd_lzo_with_size = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@
+
+quiet_cmd_lz4 = LZ4     $@
+      cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout > $@
+
+quiet_cmd_lz4_with_size = LZ4     $@
+      cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \
+                  $(size_append); } > $@
+
+# U-Boot mkimage
+# ---------------------------------------------------------------------------
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
+# the number of overrides in arch makefiles
+UIMAGE_ARCH ?= $(SRCARCH)
+UIMAGE_COMPRESSION ?= $(or $(2),none)
+UIMAGE_OPTS-y ?=
+UIMAGE_TYPE ?= kernel
+UIMAGE_LOADADDR ?= arch_must_set_this
+UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
+UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
+
+quiet_cmd_uimage = UIMAGE  $@
+      cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
+			-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
+			-T $(UIMAGE_TYPE) \
+			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
+			-n $(UIMAGE_NAME) -d $< $@
+
+# XZ
+# ---------------------------------------------------------------------------
+# Use xzkern to compress the kernel image and xzmisc to compress other things.
+#
+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
+# of the kernel decompressor. A BCJ filter is used if it is available for
+# the target architecture. xzkern also appends uncompressed size of the data
+# using size_append. The .xz format has the size information available at
+# the end of the file too, but it's in more complex format and it's good to
+# avoid changing the part of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the xz tool think that
+# the file is corrupt. This is expected.
+#
+# xzmisc doesn't use size_append, so it can be used to create normal .xz
+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
+# big dictionary would increase the memory usage too much in the multi-call
+# decompression mode. A BCJ filter isn't used either.
+quiet_cmd_xzkern = XZKERN  $@
+      cmd_xzkern = cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh > $@
+
+quiet_cmd_xzkern_with_size = XZKERN  $@
+      cmd_xzkern_with_size = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \
+                     $(size_append); } > $@
+
+quiet_cmd_xzmisc = XZMISC  $@
+      cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@
+
+# ZSTD
+# ---------------------------------------------------------------------------
+# Appends the uncompressed size of the data using size_append. The .zst
+# format has the size information available at the beginning of the file too,
+# but it's in a more complex format and it's good to avoid changing the part
+# of the boot code that reads the uncompressed size.
+#
+# Note that the bytes added by size_append will make the zstd tool think that
+# the file is corrupt. This is expected.
+#
+# zstd uses a maximum window size of 8 MB. zstd22 uses a maximum window size of
+# 128 MB. zstd22 is used for kernel compression because it is decompressed in a
+# single pass, so zstd doesn't need to allocate a window buffer. When streaming
+# decompression is used, like initramfs decompression, zstd22 should likely not
+# be used because it would require zstd to allocate a 128 MB buffer.
+
+quiet_cmd_zstd = ZSTD    $@
+      cmd_zstd = cat $(real-prereqs) | $(ZSTD) -19 > $@
+
+quiet_cmd_zstd22 = ZSTD22  $@
+      cmd_zstd22 = cat $(real-prereqs) | $(ZSTD) -22 --ultra > $@
+
+quiet_cmd_zstd22_with_size = ZSTD22  $@
+      cmd_zstd22_with_size = { cat $(real-prereqs) | $(ZSTD) -22 --ultra; $(size_append); } > $@
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+#
+# Use [:space:] because LLVM's integrated assembler inserts <tab> around
+# the .ascii directive whereas GCC keeps the <space> as-is.
+define sed-offsets
+	's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
+	/^->/{s:->#\(.*\):/* \1 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:->::; p;}'
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+	 echo "#ifndef $2"; \
+	 echo "#define $2"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-offsets) < $<; \
+	 echo ""; \
+	 echo "#endif"
+endef