Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 361 insertions, 0 deletions

diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff
new file mode 100755
index 000000000..f2bbde4bb
--- /dev/null
+++ b/scripts/dtc/dtx_diff
@@ -0,0 +1,361 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Copyright (C) 2015 Frank Rowand
+#
+
+
+usage() {
+
+	# use spaces instead of tabs in the usage message
+	cat >&2 <<eod
+
+Usage:
+
+   `basename $0` DTx
+        decompile DTx
+
+   `basename $0` DTx_1 DTx_2
+        diff DTx_1 and DTx_2
+
+
+      --annotate    synonym for -T
+      --color       synonym for -c (requires diff with --color support)
+       -c           enable colored output
+       -f           print full dts in diff (--unified=99999)
+       -h           synonym for --help
+       -help        synonym for --help
+      --help        print this message and exit
+       -s SRCTREE   linux kernel source tree is at path SRCTREE
+                        (default is current directory)
+       -S           linux kernel source tree is at root of current git repo
+       -T           annotate output .dts with input source file and line
+                        (-T -T for more details)
+       -u           unsorted, do not sort DTx
+
+
+Each DTx is processed by the dtc compiler to produce a sorted dts source
+file.  If DTx is a dts source file then it is pre-processed in the same
+manner as done for the compile of the dts source file in the Linux kernel
+build system ('#include' and '/include/' directives are processed).
+
+If two DTx are provided, the resulting dts source files are diffed.
+
+If DTx is a directory, it is treated as a DT subtree, such as
+  /proc/device-tree.
+
+If DTx contains the binary blob magic value in the first four bytes,
+  it is treated as a binary blob (aka .dtb or FDT).
+
+Otherwise DTx is treated as a dts source file (aka .dts).
+
+   If this script is not run from the root of the linux source tree,
+   and DTx utilizes '#include' or '/include/' then the path of the
+   linux source tree can be provided by '-s SRCTREE' or '-S' so that
+   include paths will be set properly.
+
+   The shell variable \${ARCH} must provide the architecture containing
+   the dts source file for include paths to be set properly for '#include'
+   or '/include/' to be processed.
+
+   If DTx_1 and DTx_2 are in different architectures, then this script
+   may not work since \${ARCH} is part of the include path.  The following
+   workaround can be used:
+
+      `basename $0` ARCH=arch_of_dtx_1 DTx_1 >tmp_dtx_1.dts
+      `basename $0` ARCH=arch_of_dtx_2 DTx_2 >tmp_dtx_2.dts
+      `basename $0` tmp_dtx_1.dts tmp_dtx_2.dts
+      rm tmp_dtx_1.dts tmp_dtx_2.dts
+
+   If DTx_1 and DTx_2 are in different directories, then this script will
+   add the path of DTx_1 and DTx_2 to the include paths.  If DTx_2 includes
+   a local file that exists in both the path of DTx_1 and DTx_2 then the
+   file in the path of DTx_1 will incorrectly be included.  Possible
+   workaround:
+
+      `basename $0` DTx_1 >tmp_dtx_1.dts
+      `basename $0` DTx_2 >tmp_dtx_2.dts
+      `basename $0` tmp_dtx_1.dts tmp_dtx_2.dts
+      rm tmp_dtx_1.dts tmp_dtx_2.dts
+
+eod
+}
+
+
+compile_to_dts() {
+
+	dtx="$1"
+	dtc_include="$2"
+
+	if [ -d "${dtx}" ] ; then
+
+		# -----  input is file tree
+
+		if ( ! ${DTC} -I fs ${dtx} ) ; then
+			exit 3
+		fi
+
+	elif [ -f "${dtx}" ] && [ -r "${dtx}" ] ; then
+
+		magic=`hexdump -n 4 -e '/1 "%02x"' ${dtx}`
+		if [ "${magic}" = "d00dfeed" ] ; then
+
+			# -----  input is FDT (binary blob)
+
+			if ( ! ${DTC} -I dtb ${dtx} ) ; then
+				exit 3
+			fi
+
+			return
+
+		fi
+
+		# -----  input is DTS (source)
+
+		if ( cpp ${cpp_flags} -x assembler-with-cpp ${dtx} \
+			| ${DTC} ${dtc_include} -I dts ) ; then
+			return
+		fi
+
+		echo ""                                                      >&2
+		echo "Possible hints to resolve the above error:"            >&2
+		echo "  (hints might not fix the problem)"                   >&2
+
+		hint_given=0
+
+		if [ "${ARCH}" = "" ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  shell variable \$ARCH not set"               >&2
+		fi
+
+		dtx_arch=`echo "/${dtx}" | sed -e 's|.*/arch/||' -e 's|/.*||'`
+
+		if [ "${dtx_arch}" != ""  -a "${dtx_arch}" != "${ARCH}" ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  architecture ${dtx_arch} is in file path,"   >&2
+			echo "  but does not match shell variable \$ARCH"    >&2
+			echo "  >>\$ARCH<< is: >>${ARCH}<<"                  >&2
+		fi
+
+		if [ ! -d ${srctree}/arch/${ARCH} ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  ${srctree}/arch/${ARCH}/ does not exist"     >&2
+			echo "  Is \$ARCH='${ARCH}' correct?"                >&2
+			echo "  Possible fix: use '-s' option"               >&2
+
+			git_root=`git rev-parse --show-toplevel 2>/dev/null`
+			if [ -d ${git_root}/arch/ ] ; then
+				echo "  Possible fix: use '-S' option"       >&2
+			fi
+		fi
+
+		if [ $hint_given = 0 ] ; then
+			echo ""                                              >&2
+			echo "  No hints available."                         >&2
+		fi
+
+		echo ""                                                      >&2
+
+		exit 3
+
+	else
+		echo ""                                                     >&2
+		echo "ERROR: ${dtx} does not exist or is not readable"      >&2
+		echo ""                                                     >&2
+		exit 2
+	fi
+
+}
+
+
+# -----  start of script
+
+annotate=""
+cmd_diff=0
+diff_flags="-u"
+diff_color=""
+dtx_file_1=""
+dtx_file_2=""
+dtc_sort="-s"
+help=0
+srctree=""
+
+
+while [ $# -gt 0 ] ; do
+
+	case $1 in
+
+	-c | --color )
+		if diff --color /dev/null /dev/null 2>/dev/null ; then
+			diff_color="--color=always"
+		fi
+		shift
+		;;
+
+	-f )
+		diff_flags="--unified=999999"
+		shift
+		;;
+
+	-h | -help | --help )
+		help=1
+		shift
+		;;
+
+	-s )
+		srctree="$2"
+		shift 2
+		;;
+
+	-S )
+		git_root=`git rev-parse --show-toplevel 2>/dev/null`
+		srctree="${git_root}"
+		shift
+		;;
+
+	-T | --annotate )
+		if [ "${annotate}"  = "" ] ; then
+			annotate="-T"
+		elif [ "${annotate}"  = "-T" ] ; then
+			annotate="-T -T"
+		fi
+		shift
+		;;
+	-u )
+		dtc_sort=""
+		shift
+		;;
+
+	*)
+		if [ "${dtx_file_1}"  = "" ] ; then
+			dtx_file_1="$1"
+		elif [ "${dtx_file_2}" = "" ] ; then
+			dtx_file_2="$1"
+		else
+			echo ""                                             >&2
+			echo "ERROR: Unexpected parameter: $1"              >&2
+			echo ""                                             >&2
+			exit 2
+		fi
+		shift
+		;;
+
+	esac
+
+done
+
+if [ "${srctree}" = "" ] ; then
+	srctree="."
+fi
+
+if [ "${dtx_file_2}" != "" ]; then
+	cmd_diff=1
+fi
+
+if (( ${help} )) ; then
+	usage
+	exit 1
+fi
+
+# this must follow check for ${help}
+if [ "${dtx_file_1}" = "" ]; then
+	echo ""                                                             >&2
+	echo "ERROR: parameter DTx required"                                >&2
+	echo ""                                                             >&2
+	exit 2
+fi
+
+
+# -----  prefer dtc from linux kernel, allow fallback to dtc in $PATH
+
+if [ "${KBUILD_OUTPUT:0:2}" = ".." ] ; then
+	__KBUILD_OUTPUT="${srctree}/${KBUILD_OUTPUT}"
+elif [ "${KBUILD_OUTPUT}" = "" ] ; then
+	__KBUILD_OUTPUT="."
+else
+	__KBUILD_OUTPUT="${KBUILD_OUTPUT}"
+fi
+
+DTC="${__KBUILD_OUTPUT}/scripts/dtc/dtc"
+
+if [ ! -x ${DTC} ] ; then
+	__DTC="dtc"
+	if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config 2>/dev/null; then
+		make_command='
+         make scripts'
+	else
+		make_command='
+         Enable CONFIG_DTC in the kernel configuration
+         make scripts'
+	fi
+	if ( ! which ${__DTC} >/dev/null ) ; then
+
+		# use spaces instead of tabs in the error message
+		cat >&2 <<eod
+
+ERROR: unable to find a 'dtc' program
+
+   Preferred 'dtc' (built from Linux kernel source tree) was not found or
+   is not executable.
+
+      'dtc' is: ${DTC}
+
+      If it does not exist, create it from the root of the Linux source tree:
+${make_command}
+
+      If not at the root of the Linux kernel source tree -s SRCTREE or -S
+      may need to be specified to find 'dtc'.
+
+      If 'O=\${dir}' is specified in your Linux builds, this script requires
+      'export KBUILD_OUTPUT=\${dir}' or add \${dir}/scripts/dtc to \$PATH
+      before running.
+
+      If \${KBUILD_OUTPUT} is a relative path, then '-s SRCDIR', -S, or run
+      this script from the root of the Linux kernel source tree is required.
+
+   Fallback '${__DTC}' was also not in \${PATH} or is not executable.
+
+eod
+		exit 2
+	fi
+	DTC=${__DTC}
+fi
+
+
+# -----  cpp and dtc flags same as for linux source tree build of .dtb files,
+#        plus directories of the dtx file(s)
+
+dtx_path_1_dtc_include="-i `dirname ${dtx_file_1}`"
+
+dtx_path_2_dtc_include=""
+if (( ${cmd_diff} )) ; then
+	dtx_path_2_dtc_include="-i `dirname ${dtx_file_2}`"
+fi
+
+cpp_flags="\
+	-nostdinc                                  \
+	-I${srctree}/scripts/dtc/include-prefixes  \
+	-undef -D__DTS__"
+
+DTC="\
+	${DTC}                                     \
+	-i ${srctree}/scripts/dtc/include-prefixes \
+	-O dts -qq -f ${dtc_sort} ${annotate} -o -"
+
+
+# -----  do the diff or decompile
+
+if (( ${cmd_diff} )) ; then
+
+	diff ${diff_flags} ${diff_color} --label "${dtx_file_1}" --label "${dtx_file_2}" \
+		<(compile_to_dts "${dtx_file_1}" "${dtx_path_1_dtc_include}") \
+		<(compile_to_dts "${dtx_file_2}" "${dtx_path_2_dtc_include}")
+
+else
+
+	compile_to_dts "${dtx_file_1}" "${dtx_path_1_dtc_include}"
+
+fi