Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 289 insertions, 0 deletions

diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c
new file mode 100644
index 000000000..1dcfb288e
--- /dev/null
+++ b/scripts/kconfig/lxdialog/inputbox.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  inputbox.c -- implements the input box
+ *
+ *  ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ *  MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ */
+
+#include "dialog.h"
+
+char dialog_input_result[MAX_LEN + 1];
+
+/*
+ *  Print the termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+	int x = width / 2 - 11;
+	int y = height - 2;
+
+	print_button(dialog, "  Ok  ", y, x, selected == 0);
+	print_button(dialog, " Help ", y, x + 14, selected == 1);
+
+	wmove(dialog, y, x + 1 + 14 * selected);
+	wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box for inputing a string
+ */
+int dialog_inputbox(const char *title, const char *prompt, int height, int width,
+		    const char *init)
+{
+	int i, x, y, box_y, box_x, box_width;
+	int input_x = 0, key = 0, button = -1;
+	int show_x, len, pos;
+	char *instr = dialog_input_result;
+	WINDOW *dialog;
+
+	if (!init)
+		instr[0] = '\0';
+	else
+		strcpy(instr, init);
+
+do_resize:
+	if (getmaxy(stdscr) <= (height - INPUTBOX_HEIGTH_MIN))
+		return -ERRDISPLAYTOOSMALL;
+	if (getmaxx(stdscr) <= (width - INPUTBOX_WIDTH_MIN))
+		return -ERRDISPLAYTOOSMALL;
+
+	/* center dialog box on screen */
+	x = (getmaxx(stdscr) - width) / 2;
+	y = (getmaxy(stdscr) - height) / 2;
+
+	draw_shadow(stdscr, y, x, height, width);
+
+	dialog = newwin(height, width, y, x);
+	keypad(dialog, TRUE);
+
+	draw_box(dialog, 0, 0, height, width,
+		 dlg.dialog.atr, dlg.border.atr);
+	wattrset(dialog, dlg.border.atr);
+	mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+	for (i = 0; i < width - 2; i++)
+		waddch(dialog, ACS_HLINE);
+	wattrset(dialog, dlg.dialog.atr);
+	waddch(dialog, ACS_RTEE);
+
+	print_title(dialog, title, width);
+
+	wattrset(dialog, dlg.dialog.atr);
+	print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+	/* Draw the input field box */
+	box_width = width - 6;
+	getyx(dialog, y, x);
+	box_y = y + 2;
+	box_x = (width - box_width) / 2;
+	draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2,
+		 dlg.dialog.atr, dlg.border.atr);
+
+	print_buttons(dialog, height, width, 0);
+
+	/* Set up the initial value */
+	wmove(dialog, box_y, box_x);
+	wattrset(dialog, dlg.inputbox.atr);
+
+	len = strlen(instr);
+	pos = len;
+
+	if (len >= box_width) {
+		show_x = len - box_width + 1;
+		input_x = box_width - 1;
+		for (i = 0; i < box_width - 1; i++)
+			waddch(dialog, instr[show_x + i]);
+	} else {
+		show_x = 0;
+		input_x = len;
+		waddstr(dialog, instr);
+	}
+
+	wmove(dialog, box_y, box_x + input_x);
+
+	wrefresh(dialog);
+
+	while (key != KEY_ESC) {
+		key = wgetch(dialog);
+
+		if (button == -1) {	/* Input box selected */
+			switch (key) {
+			case TAB:
+			case KEY_UP:
+			case KEY_DOWN:
+				break;
+			case KEY_BACKSPACE:
+			case 8:   /* ^H */
+			case 127: /* ^? */
+				if (pos) {
+					wattrset(dialog, dlg.inputbox.atr);
+					if (input_x == 0) {
+						show_x--;
+					} else
+						input_x--;
+
+					if (pos < len) {
+						for (i = pos - 1; i < len; i++) {
+							instr[i] = instr[i+1];
+						}
+					}
+
+					pos--;
+					len--;
+					instr[len] = '\0';
+					wmove(dialog, box_y, box_x);
+					for (i = 0; i < box_width; i++) {
+						if (!instr[show_x + i]) {
+							waddch(dialog, ' ');
+							break;
+						}
+						waddch(dialog, instr[show_x + i]);
+					}
+					wmove(dialog, box_y, input_x + box_x);
+					wrefresh(dialog);
+				}
+				continue;
+			case KEY_LEFT:
+				if (pos > 0) {
+					if (input_x > 0) {
+						wmove(dialog, box_y, --input_x + box_x);
+					} else if (input_x == 0) {
+						show_x--;
+						wmove(dialog, box_y, box_x);
+						for (i = 0; i < box_width; i++) {
+							if (!instr[show_x + i]) {
+								waddch(dialog, ' ');
+								break;
+							}
+							waddch(dialog, instr[show_x + i]);
+						}
+						wmove(dialog, box_y, box_x);
+					}
+					pos--;
+				}
+				continue;
+			case KEY_RIGHT:
+				if (pos < len) {
+					if (input_x < box_width - 1) {
+						wmove(dialog, box_y, ++input_x + box_x);
+					} else if (input_x == box_width - 1) {
+						show_x++;
+						wmove(dialog, box_y, box_x);
+						for (i = 0; i < box_width; i++) {
+							if (!instr[show_x + i]) {
+								waddch(dialog, ' ');
+								break;
+							}
+							waddch(dialog, instr[show_x + i]);
+						}
+						wmove(dialog, box_y, input_x + box_x);
+					}
+					pos++;
+				}
+				continue;
+			default:
+				if (key < 0x100 && isprint(key)) {
+					if (len < MAX_LEN) {
+						wattrset(dialog, dlg.inputbox.atr);
+						if (pos < len) {
+							for (i = len; i > pos; i--)
+								instr[i] = instr[i-1];
+							instr[pos] = key;
+						} else {
+							instr[len] = key;
+						}
+						pos++;
+						len++;
+						instr[len] = '\0';
+
+						if (input_x == box_width - 1) {
+							show_x++;
+						} else {
+							input_x++;
+						}
+
+						wmove(dialog, box_y, box_x);
+						for (i = 0; i < box_width; i++) {
+							if (!instr[show_x + i]) {
+								waddch(dialog, ' ');
+								break;
+							}
+							waddch(dialog, instr[show_x + i]);
+						}
+						wmove(dialog, box_y, input_x + box_x);
+						wrefresh(dialog);
+					} else
+						flash();	/* Alarm user about overflow */
+					continue;
+				}
+			}
+		}
+		switch (key) {
+		case 'O':
+		case 'o':
+			delwin(dialog);
+			return 0;
+		case 'H':
+		case 'h':
+			delwin(dialog);
+			return 1;
+		case KEY_UP:
+		case KEY_LEFT:
+			switch (button) {
+			case -1:
+				button = 1;	/* Indicates "Help" button is selected */
+				print_buttons(dialog, height, width, 1);
+				break;
+			case 0:
+				button = -1;	/* Indicates input box is selected */
+				print_buttons(dialog, height, width, 0);
+				wmove(dialog, box_y, box_x + input_x);
+				wrefresh(dialog);
+				break;
+			case 1:
+				button = 0;	/* Indicates "OK" button is selected */
+				print_buttons(dialog, height, width, 0);
+				break;
+			}
+			break;
+		case TAB:
+		case KEY_DOWN:
+		case KEY_RIGHT:
+			switch (button) {
+			case -1:
+				button = 0;	/* Indicates "OK" button is selected */
+				print_buttons(dialog, height, width, 0);
+				break;
+			case 0:
+				button = 1;	/* Indicates "Help" button is selected */
+				print_buttons(dialog, height, width, 1);
+				break;
+			case 1:
+				button = -1;	/* Indicates input box is selected */
+				print_buttons(dialog, height, width, 0);
+				wmove(dialog, box_y, box_x + input_x);
+				wrefresh(dialog);
+				break;
+			}
+			break;
+		case ' ':
+		case '\n':
+			delwin(dialog);
+			return (button == -1 ? 0 : button);
+		case 'X':
+		case 'x':
+			key = KEY_ESC;
+			break;
+		case KEY_ESC:
+			key = on_key_esc(dialog);
+			break;
+		case KEY_RESIZE:
+			delwin(dialog);
+			on_key_resize();
+			goto do_resize;
+		}
+	}
+
+	delwin(dialog);
+	return KEY_ESC;		/* ESC pressed */
+}