Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 211 insertions, 0 deletions

diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
new file mode 100755
index 000000000..32620de47
--- /dev/null
+++ b/scripts/kconfig/merge_config.sh
@@ -0,0 +1,211 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+#  merge_config.sh - Takes a list of config fragment values, and merges
+#  them one by one. Provides warnings on overridden values, and specified
+#  values that did not make it to the resulting .config file (due to missed
+#  dependencies or config symbol removal).
+#
+#  Portions reused from kconf_check and generate_cfg:
+#  http://git.yoctoproject.org/cgit/cgit.cgi/yocto-kernel-tools/tree/tools/kconf_check
+#  http://git.yoctoproject.org/cgit/cgit.cgi/yocto-kernel-tools/tree/tools/generate_cfg
+#
+#  Copyright (c) 2009-2010 Wind River Systems, Inc.
+#  Copyright 2011 Linaro
+
+set -e
+
+clean_up() {
+	rm -f $TMP_FILE
+	rm -f $MERGE_FILE
+}
+
+usage() {
+	echo "Usage: $0 [OPTIONS] [CONFIG [...]]"
+	echo "  -h    display this help text"
+	echo "  -m    only merge the fragments, do not execute the make command"
+	echo "  -n    use allnoconfig instead of alldefconfig"
+	echo "  -r    list redundant entries when merging fragments"
+	echo "  -y    make builtin have precedence over modules"
+	echo "  -O    dir to put generated output files.  Consider setting \$KCONFIG_CONFIG instead."
+	echo "  -s    strict mode. Fail if the fragment redefines any value."
+	echo "  -Q    disable warning messages for overridden options."
+	echo
+	echo "Used prefix: '$CONFIG_PREFIX'. You can redefine it with \$CONFIG_ environment variable."
+}
+
+RUNMAKE=true
+ALLTARGET=alldefconfig
+WARNREDUN=false
+BUILTIN=false
+OUTPUT=.
+STRICT=false
+CONFIG_PREFIX=${CONFIG_-CONFIG_}
+WARNOVERRIDE=echo
+
+while true; do
+	case $1 in
+	"-n")
+		ALLTARGET=allnoconfig
+		shift
+		continue
+		;;
+	"-m")
+		RUNMAKE=false
+		shift
+		continue
+		;;
+	"-h")
+		usage
+		exit
+		;;
+	"-r")
+		WARNREDUN=true
+		shift
+		continue
+		;;
+	"-y")
+		BUILTIN=true
+		shift
+		continue
+		;;
+	"-O")
+		if [ -d $2 ];then
+			OUTPUT=$(echo $2 | sed 's/\/*$//')
+		else
+			echo "output directory $2 does not exist" 1>&2
+			exit 1
+		fi
+		shift 2
+		continue
+		;;
+	"-s")
+		STRICT=true
+		shift
+		continue
+		;;
+	"-Q")
+		WARNOVERRIDE=true
+		shift
+		continue
+		;;
+	*)
+		break
+		;;
+	esac
+done
+
+if [ "$#" -lt 1 ] ; then
+	usage
+	exit
+fi
+
+if [ -z "$KCONFIG_CONFIG" ]; then
+	if [ "$OUTPUT" != . ]; then
+		KCONFIG_CONFIG=$(readlink -m -- "$OUTPUT/.config")
+	else
+		KCONFIG_CONFIG=.config
+	fi
+fi
+
+INITFILE=$1
+shift;
+
+if [ ! -r "$INITFILE" ]; then
+	echo "The base file '$INITFILE' does not exist.  Exit." >&2
+	exit 1
+fi
+
+MERGE_LIST=$*
+SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
+SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
+
+TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
+MERGE_FILE=$(mktemp ./.merge_tmp.config.XXXXXXXXXX)
+
+echo "Using $INITFILE as base"
+
+trap clean_up EXIT
+
+cat $INITFILE > $TMP_FILE
+
+# Merge files, printing warnings on overridden values
+for ORIG_MERGE_FILE in $MERGE_LIST ; do
+	echo "Merging $ORIG_MERGE_FILE"
+	if [ ! -r "$ORIG_MERGE_FILE" ]; then
+		echo "The merge file '$ORIG_MERGE_FILE' does not exist.  Exit." >&2
+		exit 1
+	fi
+	cat $ORIG_MERGE_FILE > $MERGE_FILE
+	CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
+
+	for CFG in $CFG_LIST ; do
+		grep -q -w $CFG $TMP_FILE || continue
+		PREV_VAL=$(grep -w $CFG $TMP_FILE)
+		NEW_VAL=$(grep -w $CFG $MERGE_FILE)
+		BUILTIN_FLAG=false
+		if [ "$BUILTIN" = "true" ] && [ "${NEW_VAL#CONFIG_*=}" = "m" ] && [ "${PREV_VAL#CONFIG_*=}" = "y" ]; then
+			${WARNOVVERIDE} Previous  value: $PREV_VAL
+			${WARNOVERRIDE} New value:       $NEW_VAL
+			${WARNOVERRIDE} -y passed, will not demote y to m
+			${WARNOVERRIDE}
+			BUILTIN_FLAG=true
+		elif [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
+			${WARNOVERRIDE} Value of $CFG is redefined by fragment $ORIG_MERGE_FILE:
+			${WARNOVERRIDE} Previous  value: $PREV_VAL
+			${WARNOVERRIDE} New value:       $NEW_VAL
+			${WARNOVERRIDE}
+			if [ "$STRICT" = "true" ]; then
+				STRICT_MODE_VIOLATED=true
+			fi
+		elif [ "$WARNREDUN" = "true" ]; then
+			${WARNOVERRIDE} Value of $CFG is redundant by fragment $ORIG_MERGE_FILE:
+		fi
+		if [ "$BUILTIN_FLAG" = "false" ]; then
+			sed -i "/$CFG[ =]/d" $TMP_FILE
+		else
+			sed -i "/$CFG[ =]/d" $MERGE_FILE
+		fi
+	done
+	cat $MERGE_FILE >> $TMP_FILE
+done
+
+if [ "$STRICT_MODE_VIOLATED" = "true" ]; then
+	echo "The fragment redefined a value and strict mode had been passed."
+	exit 1
+fi
+
+if [ "$RUNMAKE" = "false" ]; then
+	cp -T -- "$TMP_FILE" "$KCONFIG_CONFIG"
+	echo "#"
+	echo "# merged configuration written to $KCONFIG_CONFIG (needs make)"
+	echo "#"
+	exit
+fi
+
+# If we have an output dir, setup the O= argument, otherwise leave
+# it blank, since O=. will create an unnecessary ./source softlink
+OUTPUT_ARG=""
+if [ "$OUTPUT" != "." ] ; then
+	OUTPUT_ARG="O=$OUTPUT"
+fi
+
+
+# Use the merged file as the starting point for:
+# alldefconfig: Fills in any missing symbols with Kconfig default
+# allnoconfig: Fills in any missing symbols with # CONFIG_* is not set
+make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
+
+
+# Check all specified config values took (might have missed-dependency issues)
+for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
+
+	REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
+	ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG" || true)
+	if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then
+		echo "Value requested for $CFG not in final .config"
+		echo "Requested value:  $REQUESTED_VAL"
+		echo "Actual value:     $ACTUAL_VAL"
+		echo ""
+	fi
+done