Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 237 insertions, 0 deletions

diff --git a/sound/core/Kconfig b/sound/core/Kconfig
new file mode 100644
index 000000000..12990d9a4
--- /dev/null
+++ b/sound/core/Kconfig
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# ALSA soundcard-configuration
+config SND_TIMER
+	tristate
+
+config SND_PCM
+	tristate
+	select SND_TIMER if SND_PCM_TIMER
+
+config SND_PCM_ELD
+	bool
+
+config SND_PCM_IEC958
+	bool
+
+config SND_DMAENGINE_PCM
+	tristate
+
+config SND_HWDEP
+	tristate
+
+config SND_SEQ_DEVICE
+	tristate
+
+config SND_RAWMIDI
+	tristate
+	select SND_SEQ_DEVICE if SND_SEQUENCER != n
+
+config SND_COMPRESS_OFFLOAD
+	tristate
+
+config SND_JACK
+	bool
+
+# enable input device support in jack layer
+config SND_JACK_INPUT_DEV
+	bool
+	depends on SND_JACK
+	default y if INPUT=y || INPUT=SND
+
+config SND_OSSEMUL
+	bool "Enable OSS Emulation"
+	select SOUND_OSS_CORE
+	help
+	  This option enables the build of OSS emulation layer.
+
+config SND_MIXER_OSS
+	tristate "OSS Mixer API"
+	depends on SND_OSSEMUL
+	help
+	  To enable OSS mixer API emulation (/dev/mixer*), say Y here
+	  and read <file:Documentation/sound/designs/oss-emulation.rst>.
+
+	  Many programs still use the OSS API, so say Y.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-mixer-oss.
+
+config SND_PCM_OSS
+	tristate "OSS PCM (digital audio) API"
+	depends on SND_OSSEMUL
+	select SND_PCM
+	help
+	  To enable OSS digital audio (PCM) emulation (/dev/dsp*), say Y
+	  here and read <file:Documentation/sound/designs/oss-emulation.rst>.
+
+	  Many programs still use the OSS API, so say Y.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-pcm-oss.
+
+config SND_PCM_OSS_PLUGINS
+	bool "OSS PCM (digital audio) API - Include plugin system"
+	depends on SND_PCM_OSS
+	default y
+	help
+	  If you disable this option, the ALSA's OSS PCM API will not
+	  support conversion of channels, formats and rates. It will
+	  behave like most of new OSS/Free drivers in 2.4/2.6 kernels.
+
+config SND_PCM_TIMER
+	bool "PCM timer interface" if EXPERT
+	default y
+	help
+	  If you disable this option, pcm timer will be unavailable, so
+	  those stubs that use pcm timer (e.g. dmix, dsnoop & co) may work
+	  incorrectly.
+
+	  For some embedded devices, we may disable it to reduce memory
+	  footprint, about 20KB on x86_64 platform.
+
+config SND_HRTIMER
+	tristate "HR-timer backend support"
+	depends on HIGH_RES_TIMERS
+	select SND_TIMER
+	help
+	  Say Y here to enable HR-timer backend for ALSA timer.  ALSA uses
+	  the hrtimer as a precise timing source. The ALSA sequencer code
+	  also can use this timing source.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-hrtimer.
+
+config SND_DYNAMIC_MINORS
+	bool "Dynamic device file minor numbers"
+	help
+	  If you say Y here, the minor numbers of ALSA device files in
+	  /dev/snd/ are allocated dynamically.  This allows you to have
+	  more than 8 sound cards, but requires a dynamic device file
+	  system like udev.
+
+	  If you are unsure about this, say N here.
+
+config SND_MAX_CARDS
+	int "Max number of sound cards"
+	range 4 256
+	default 32
+	depends on SND_DYNAMIC_MINORS
+	help
+	  Specify the max number of sound cards that can be assigned
+	  on a single machine.
+
+config SND_SUPPORT_OLD_API
+	bool "Support old ALSA API"
+	default y
+	help
+	  Say Y here to support the obsolete ALSA PCM API (ver.0.9.0 rc3
+	  or older).
+
+config SND_PROC_FS
+	bool "Sound Proc FS Support" if EXPERT
+	depends on PROC_FS
+	default y
+	help
+	  Say 'N' to disable Sound proc FS, which may reduce code size about
+	  9KB on x86_64 platform.
+	  If unsure say Y.
+
+config SND_VERBOSE_PROCFS
+	bool "Verbose procfs contents"
+	depends on SND_PROC_FS
+	default y
+	help
+	  Say Y here to include code for verbose procfs contents (provides
+	  useful information to developers when a problem occurs).  On the
+	  other side, it makes the ALSA subsystem larger.
+
+config SND_VERBOSE_PRINTK
+	bool "Verbose printk"
+	help
+	  Say Y here to enable verbose log messages.  These messages
+	  will help to identify source file and position containing
+	  printed messages.
+
+	  You don't need this unless you're debugging ALSA.
+
+config SND_CTL_FAST_LOOKUP
+	bool "Fast lookup of control elements" if EXPERT
+	default y
+	select XARRAY_MULTI
+	help
+	  This option enables the faster lookup of control elements.
+	  It will consume more memory because of the additional Xarray.
+	  If you want to choose the memory footprint over the performance
+	  inevitably, turn this off.
+
+config SND_DEBUG
+	bool "Debug"
+	help
+	  Say Y here to enable ALSA debug code.
+
+config SND_DEBUG_VERBOSE
+	bool "More verbose debug"
+	depends on SND_DEBUG
+	help
+	  Say Y here to enable extra-verbose debugging messages.
+
+	  Let me repeat: it enables EXTRA-VERBOSE DEBUGGING messages.
+	  So, say Y only if you are ready to be annoyed.
+
+config SND_PCM_XRUN_DEBUG
+	bool "Enable PCM ring buffer overrun/underrun debugging"
+	default n
+	depends on SND_DEBUG && SND_VERBOSE_PROCFS
+	help
+	  Say Y to enable the PCM ring buffer overrun/underrun debugging.
+	  It is usually not required, but if you have trouble with
+	  sound clicking when system is loaded, it may help to determine
+	  the process or driver which causes the scheduling gaps.
+
+config SND_CTL_INPUT_VALIDATION
+	bool "Validate input data to control API"
+	help
+	  Say Y to enable the additional validation for the input data to
+	  each control element, including the value range checks.
+	  An error is returned from ALSA core for invalid inputs without
+	  passing to the driver.  This is a kind of hardening for drivers
+	  that have no proper error checks, at the cost of a slight
+	  performance overhead.
+
+config SND_CTL_DEBUG
+	bool "Enable debugging feature for control API"
+	depends on SND_DEBUG
+	help
+	  Say Y to enable the debugging feature for ALSA control API.
+	  It performs the additional sanity-checks for each control element
+	  read access, such as whether the values returned from the driver
+	  are in the proper ranges or the check of the invalid access at
+	  out-of-array areas.  The error is printed when the driver gives
+	  such unexpected values.
+	  When you develop a driver that deals with control elements, it's
+	  strongly recommended to try this one once and verify whether you see
+	  any relevant errors or not.
+
+config SND_JACK_INJECTION_DEBUG
+	bool "Sound jack injection interface via debugfs"
+	depends on SND_JACK && SND_DEBUG && DEBUG_FS
+	help
+	  This option can be used to enable or disable sound jack
+	  software injection.
+	  Say Y if you are debugging via jack injection interface.
+	  If unsure select "N".
+
+config SND_VMASTER
+	bool
+
+config SND_DMA_SGBUF
+	def_bool y
+	depends on X86
+
+config SND_CTL_LED
+	tristate
+	select NEW_LEDS if SND_CTL_LED
+	select LEDS_TRIGGERS if SND_CTL_LED
+	select LEDS_TRIGGER_AUDIO if SND_CTL_LED
+
+source "sound/core/seq/Kconfig"