Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 343 insertions, 0 deletions

diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
new file mode 100644
index 000000000..6f9022784
--- /dev/null
+++ b/sound/pci/azt3328.h
@@ -0,0 +1,343 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOUND_AZT3328_H
+#define __SOUND_AZT3328_H
+
+/* "PU" == "power-up value", as tested on PCI168 PCI rev. 10
+ * "WRITE_ONLY"  == register does not indicate actual bit values */
+
+/*** main I/O area port indices ***/
+/* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
+#define AZF_IO_SIZE_CTRL	0x80
+#define AZF_IO_SIZE_CTRL_PM	0x70
+
+/* the driver initialisation suggests a layout of 4 areas
+ * within the main card control I/O:
+ * from 0x00 (playback codec), from 0x20 (recording codec)
+ * and from 0x40 (most certainly I2S out codec).
+ * And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
+ * power management etc.???). */
+
+#define AZF_IO_OFFS_CODEC_PLAYBACK	0x00
+#define AZF_IO_OFFS_CODEC_CAPTURE	0x20
+#define AZF_IO_OFFS_CODEC_I2S_OUT	0x40
+
+#define IDX_IO_CODEC_DMA_FLAGS       0x00 /* PU:0x0000 */
+     /* able to reactivate output after output muting due to 8/16bit
+      * output change, just like 0x0002.
+      * 0x0001 is the only bit that's able to start the DMA counter */
+  #define DMA_RESUME			0x0001 /* paused if cleared? */
+     /* 0x0002 *temporarily* set during DMA stopping. hmm
+      * both 0x0002 and 0x0004 set in playback setup. */
+     /* able to reactivate output after output muting due to 8/16bit
+      * output change, just like 0x0001. */
+  #define DMA_RUN_SOMETHING1		0x0002 /* \ alternated (toggled) */
+     /* 0x0004: NOT able to reactivate output */
+  #define DMA_RUN_SOMETHING2		0x0004 /* / bits */
+  #define SOMETHING_ALMOST_ALWAYS_SET	0x0008 /* ???; can be modified */
+  #define DMA_EPILOGUE_SOMETHING	0x0010
+  #define DMA_SOMETHING_ELSE		0x0020 /* ??? */
+  #define SOMETHING_UNMODIFIABLE	0xffc0 /* unused? not modifiable */
+#define IDX_IO_CODEC_IRQTYPE     0x02 /* PU:0x0001 */
+  /* write back to flags in case flags are set, in order to ACK IRQ in handler
+   * (bit 1 of port 0x64 indicates interrupt for one of these three types)
+   * sometimes in this case it just writes 0xffff to globally ACK all IRQs
+   * settings written are not reflected when reading back, though.
+   * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows? */
+  #define IRQ_SOMETHING			0x0001 /* something & ACK */
+  #define IRQ_FINISHED_DMABUF_1		0x0002 /* 1st dmabuf finished & ACK */
+  #define IRQ_FINISHED_DMABUF_2		0x0004 /* 2nd dmabuf finished & ACK */
+  #define IRQMASK_SOME_STATUS_1		0x0008 /* \ related bits */
+  #define IRQMASK_SOME_STATUS_2		0x0010 /* / (checked together in loop) */
+  #define IRQMASK_UNMODIFIABLE		0xffe0 /* unused? not modifiable */
+  /* start address of 1st DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_1 0x04
+  /* start address of 2nd DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_2 0x08
+  /* both lengths of DMA transfer areas, PU:0x00000000
+     length1: offset 0x0c, length2: offset 0x0e */
+#define IDX_IO_CODEC_DMA_LENGTHS 0x0c
+#define IDX_IO_CODEC_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
+  /* offset within current DMA transfer area, PU:0x0000 */
+#define IDX_IO_CODEC_DMA_CURROFS 0x14
+#define IDX_IO_CODEC_SOUNDFORMAT 0x16 /* PU:0x0010 */
+  /* all unspecified bits can't be modified */
+  #define SOUNDFORMAT_FREQUENCY_MASK	0x000f
+  #define SOUNDFORMAT_XTAL1		0x00
+  #define SOUNDFORMAT_XTAL2		0x01
+    /* all _SUSPECTED_ values are not used by Windows drivers, so we don't
+     * have any hard facts, only rough measurements.
+     * All we know is that the crystal used on the board has 24.576MHz,
+     * like many soundcards (which results in the frequencies below when
+     * using certain divider values selected by the values below) */
+    #define SOUNDFORMAT_FREQ_SUSPECTED_4000	0x0c | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_SUSPECTED_4800	0x0a | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_5510		0x0c | SOUNDFORMAT_XTAL2
+    #define SOUNDFORMAT_FREQ_6620		0x0a | SOUNDFORMAT_XTAL2
+    #define SOUNDFORMAT_FREQ_8000		0x00 | SOUNDFORMAT_XTAL1 /* also 0x0e | SOUNDFORMAT_XTAL1? */
+    #define SOUNDFORMAT_FREQ_9600		0x08 | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_11025		0x00 | SOUNDFORMAT_XTAL2 /* also 0x0e | SOUNDFORMAT_XTAL2? */
+    #define SOUNDFORMAT_FREQ_SUSPECTED_13240	0x08 | SOUNDFORMAT_XTAL2 /* seems to be 6620 *2 */
+    #define SOUNDFORMAT_FREQ_16000		0x02 | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_22050		0x02 | SOUNDFORMAT_XTAL2
+    #define SOUNDFORMAT_FREQ_32000		0x04 | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_44100		0x04 | SOUNDFORMAT_XTAL2
+    #define SOUNDFORMAT_FREQ_48000		0x06 | SOUNDFORMAT_XTAL1
+    #define SOUNDFORMAT_FREQ_SUSPECTED_66200	0x06 | SOUNDFORMAT_XTAL2 /* 66200 (13240 * 5); 64000 may have been nicer :-\ */
+  #define SOUNDFORMAT_FLAG_16BIT	0x0010
+  #define SOUNDFORMAT_FLAG_2CHANNELS	0x0020
+
+
+/* define frequency helpers, for maximum value safety */
+enum azf_freq_t {
+#define AZF_FREQ(rate) AZF_FREQ_##rate = rate
+  AZF_FREQ(4000),
+  AZF_FREQ(4800),
+  AZF_FREQ(5512),
+  AZF_FREQ(6620),
+  AZF_FREQ(8000),
+  AZF_FREQ(9600),
+  AZF_FREQ(11025),
+  AZF_FREQ(13240),
+  AZF_FREQ(16000),
+  AZF_FREQ(22050),
+  AZF_FREQ(32000),
+  AZF_FREQ(44100),
+  AZF_FREQ(48000),
+  AZF_FREQ(66200),
+#undef AZF_FREQ
+};
+
+/** DirectX timer, main interrupt area (FIXME: and something else?) **/ 
+#define IDX_IO_TIMER_VALUE	0x60 /* found this timer area by pure luck :-) */
+  /* timer countdown value; triggers IRQ when timer is finished */
+  #define TIMER_VALUE_MASK		0x000fffffUL
+  /* activate timer countdown */
+  #define TIMER_COUNTDOWN_ENABLE	0x01000000UL
+  /* trigger timer IRQ on zero transition */
+  #define TIMER_IRQ_ENABLE		0x02000000UL
+  /* being set in IRQ handler in case port 0x00 (hmm, not port 0x64!?!?)
+   * had 0x0020 set upon IRQ handler */
+  #define TIMER_IRQ_ACK			0x04000000UL
+#define IDX_IO_IRQSTATUS        0x64
+  /* some IRQ bit in here might also be used to signal a power-management timer
+   * timeout, to request shutdown of the chip (e.g. AD1815JS has such a thing).
+   * OPL3 hardware contains several timers which confusingly in most cases
+   * are NOT routed to an IRQ, but some designs (e.g. LM4560) DO support that,
+   * so I wouldn't be surprised at all to discover that AZF3328
+   * supports that thing as well... */
+
+  #define IRQ_PLAYBACK	0x0001
+  #define IRQ_RECORDING	0x0002
+  #define IRQ_I2S_OUT	0x0004 /* this IS I2S, right!? (untested) */
+  #define IRQ_GAMEPORT	0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */
+  #define IRQ_MPU401	0x0010
+  #define IRQ_TIMER	0x0020 /* DirectX timer */
+  #define IRQ_UNKNOWN2	0x0040 /* probably unused, or possibly OPL3 timer? */
+  #define IRQ_UNKNOWN3	0x0080 /* probably unused, or possibly OPL3 timer? */
+#define IDX_IO_66H		0x66    /* writing 0xffff returns 0x0000 */
+  /* this is set to e.g. 0x3ff or 0x300, and writable;
+   * maybe some buffer limit, but I couldn't find out more, PU:0x00ff: */
+#define IDX_IO_SOME_VALUE	0x68
+  #define IO_68_RANDOM_TOGGLE1	0x0100	/* toggles randomly */
+  #define IO_68_RANDOM_TOGGLE2	0x0200	/* toggles randomly */
+  /* umm, nope, behaviour of these bits changes depending on what we wrote
+   * to 0x6b!!
+   * And they change upon playback/stop, too:
+   * Writing a value to 0x68 will display this exact value during playback,
+   * too but when stopped it can fall back to a rather different
+   * seemingly random value). Hmm, possibly this is a register which
+   * has a remote shadow which needs proper device supply which only exists
+   * in case playback is active? Or is this driver-induced?
+   */
+
+/* this WORD can be set to have bits 0x0028 activated (FIXME: correct??);
+ * actually inhibits PCM playback!!! maybe power management??: */
+#define IDX_IO_6AH		0x6A /* WRITE_ONLY! */
+  /* bit 5: enabling this will activate permanent counting of bytes 2/3
+   * at gameport I/O (0xb402/3) (equal values each) and cause
+   * gameport legacy I/O at 0x0200 to be _DISABLED_!
+   * Is this Digital Enhanced Game Port Enable??? Or maybe it's Testmode
+   * for Enhanced Digital Gameport (see 4D Wave DX card): */
+  #define IO_6A_SOMETHING1_GAMEPORT	0x0020
+  /* bit 8; sure, this _pauses_ playback (later resumes at same spot!),
+   * but what the heck is this really about??: */
+  #define IO_6A_PAUSE_PLAYBACK_BIT8	0x0100
+  /* bit 9; sure, this _pauses_ playback (later resumes at same spot!),
+   * but what the heck is this really about??: */
+  #define IO_6A_PAUSE_PLAYBACK_BIT9	0x0200
+	/* BIT8 and BIT9 are _NOT_ able to affect OPL3 MIDI playback,
+	 * thus it suggests influence on PCM only!!
+	 * However OTOH there seems to be no bit anywhere around here
+	 * which is able to disable OPL3... */
+  /* bit 10: enabling this actually changes values at legacy gameport
+   * I/O address (0x200); is this enabling of the Digital Enhanced Game Port???
+   * Or maybe this simply switches off the NE558 circuit, since enabling this
+   * still lets us evaluate button states, but not axis states */
+  #define IO_6A_SOMETHING2_GAMEPORT      0x0400
+	/* writing 0x0300: causes quite some crackling during
+	 * PC activity such as switching windows (PCI traffic??
+	 * --> FIFO/timing settings???) */
+	/* writing 0x0100 plus/or 0x0200 inhibits playback */
+	/* since the Windows .INF file has Flag_Enable_JoyStick and
+	 * Flag_Enable_SB_DOS_Emulation directly together, it stands to reason
+	 * that some other bit in this same register might be responsible
+	 * for SB DOS Emulation activation (note that the file did NOT define
+	 * a switch for OPL3!) */
+#define IDX_IO_6CH		0x6C	/* unknown; fully read-writable */
+#define IDX_IO_6EH		0x6E
+	/* writing 0xffff returns 0x83fe (or 0x03fe only).
+	 * writing 0x83 (and only 0x83!!) to 0x6f will cause 0x6c to switch
+	 * from 0000 to ffff. */
+
+/* further I/O indices not saved/restored and not readable after writing,
+ * so probably not used */
+
+
+/*** Gameport area port indices ***/
+/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */ 
+#define AZF_IO_SIZE_GAME		0x08
+#define AZF_IO_SIZE_GAME_PM		0x06
+
+enum {
+	AZF_GAME_LEGACY_IO_PORT = 0x200
+};
+
+#define IDX_GAME_LEGACY_COMPATIBLE	0x00
+	/* in some operation mode, writing anything to this port
+	 * triggers an interrupt:
+	 * yup, that's in case IDX_GAME_01H has one of the
+	 * axis measurement bits enabled
+	 * (and of course one needs to have GAME_HWCFG_IRQ_ENABLE, too) */
+
+#define IDX_GAME_AXES_CONFIG            0x01
+	/* NOTE: layout of this register awfully similar (read: "identical??")
+	 * to AD1815JS.pdf (p.29) */
+
+  /* enables axis 1 (X axis) measurement: */
+  #define GAME_AXES_ENABLE_1		0x01
+  /* enables axis 2 (Y axis) measurement: */
+  #define GAME_AXES_ENABLE_2		0x02
+  /* enables axis 3 (X axis) measurement: */
+  #define GAME_AXES_ENABLE_3		0x04
+  /* enables axis 4 (Y axis) measurement: */
+  #define GAME_AXES_ENABLE_4		0x08
+  /* selects the current axis to read the measured value of
+   * (at IDX_GAME_AXIS_VALUE):
+   * 00 = axis 1, 01 = axis 2, 10 = axis 3, 11 = axis 4: */
+  #define GAME_AXES_READ_MASK		0x30
+  /* enable to have the latch continuously accept ADC values
+   * (and continuously cause interrupts in case interrupts are enabled);
+   * AD1815JS.pdf says it's ~16ms interval there: */
+  #define GAME_AXES_LATCH_ENABLE	0x40
+  /* joystick data (measured axes) ready for reading: */
+  #define GAME_AXES_SAMPLING_READY	0x80
+
+  /* NOTE: other card specs (SiS960 and others!) state that the
+   * game position latches should be frozen when reading and be freed
+   * (== reset?) after reading!!!
+   * Freezing most likely means disabling 0x40 (GAME_AXES_LATCH_ENABLE),
+   *  but how to free the value? */
+  /* An internet search for "gameport latch ADC" should provide some insight
+   * into how to program such a gameport system. */
+
+  /* writing 0xf0 to 01H once reset both counters to 0, in some special mode!?
+   * yup, in case 6AH 0x20 is not enabled
+   * (and 0x40 is sufficient, 0xf0 is not needed) */
+
+#define IDX_GAME_AXIS_VALUE	0x02
+	/* R: value of currently configured axis (word value!);
+	 * W: trigger axis measurement */
+
+#define IDX_GAME_HWCONFIG	0x04
+	/* note: bits 4 to 7 are never set (== 0) when reading!
+	 * --> reserved bits? */
+  /* enables IRQ notification upon axes measurement ready: */
+  #define GAME_HWCFG_IRQ_ENABLE			0x01
+  /* these bits choose a different frequency for the
+   *  internal ADC counter increment.
+   * hmm, seems to be a combo of bits:
+   * 00 --> standard frequency
+   * 10 --> 1/2
+   * 01 --> 1/20
+   * 11 --> 1/200: */
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_MASK	0x06
+
+  /* FIXME: these values might be reversed... */
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_STD	0
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_2	1
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_20	2
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_200	3
+
+  /* enable gameport legacy I/O address (0x200)
+   * I was unable to locate any configurability for a different address: */
+  #define GAME_HWCFG_LEGACY_ADDRESS_ENABLE	0x08
+
+/*** MPU401 ***/
+#define AZF_IO_SIZE_MPU		0x04
+#define AZF_IO_SIZE_MPU_PM	0x04
+
+/*** OPL3 synth ***/
+/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
+#define AZF_IO_SIZE_OPL3	0x08
+#define AZF_IO_SIZE_OPL3_PM	0x06
+/* hmm, given that a standard OPL3 has 4 registers only,
+ * there might be some enhanced functionality lurking at the end
+ * (especially since register 0x04 has a "non-empty" value 0xfe) */
+
+/*** mixer I/O area port indices ***/
+/* (only 0x22 of 0x40 bytes saved/restored by Windows driver)
+ * UNFORTUNATELY azf3328 is NOT truly AC97 compliant: see main file intro */
+#define AZF_IO_SIZE_MIXER	0x40
+#define AZF_IO_SIZE_MIXER_PM	0x22
+
+  #define MIXER_VOLUME_RIGHT_MASK	0x001f
+  #define MIXER_VOLUME_LEFT_MASK	0x1f00
+  #define MIXER_MUTE_MASK		0x8000
+#define IDX_MIXER_RESET		0x00 /* does NOT seem to have AC97 ID bits */
+#define IDX_MIXER_PLAY_MASTER   0x02
+#define IDX_MIXER_MODEMOUT      0x04
+#define IDX_MIXER_BASSTREBLE    0x06
+  #define MIXER_BASSTREBLE_TREBLE_VOLUME_MASK	0x000e
+  #define MIXER_BASSTREBLE_BASS_VOLUME_MASK	0x0e00
+#define IDX_MIXER_PCBEEP        0x08
+#define IDX_MIXER_MODEMIN       0x0a
+#define IDX_MIXER_MIC           0x0c
+  #define MIXER_MIC_MICGAIN_20DB_ENHANCEMENT_MASK	0x0040
+#define IDX_MIXER_LINEIN        0x0e
+#define IDX_MIXER_CDAUDIO       0x10
+#define IDX_MIXER_VIDEO         0x12
+#define IDX_MIXER_AUX           0x14
+#define IDX_MIXER_WAVEOUT       0x16
+#define IDX_MIXER_FMSYNTH       0x18
+#define IDX_MIXER_REC_SELECT    0x1a
+  #define MIXER_REC_SELECT_MIC		0x00
+  #define MIXER_REC_SELECT_CD		0x01
+  #define MIXER_REC_SELECT_VIDEO	0x02
+  #define MIXER_REC_SELECT_AUX		0x03
+  #define MIXER_REC_SELECT_LINEIN	0x04
+  #define MIXER_REC_SELECT_MIXSTEREO	0x05
+  #define MIXER_REC_SELECT_MIXMONO	0x06
+  #define MIXER_REC_SELECT_MONOIN	0x07
+#define IDX_MIXER_REC_VOLUME    0x1c
+#define IDX_MIXER_ADVCTL1       0x1e
+  /* unlisted bits are unmodifiable */
+  #define MIXER_ADVCTL1_3DWIDTH_MASK	0x000e
+  #define MIXER_ADVCTL1_HIFI3D_MASK	0x0300 /* yup, this is missing the high bit that official AC97 contains, plus it doesn't have linear bit value range behaviour but instead acts weirdly (possibly we're dealing with two *different* 3D settings here??) */
+#define IDX_MIXER_ADVCTL2       0x20 /* subset of AC97_GENERAL_PURPOSE reg! */
+  /* unlisted bits are unmodifiable */
+  #define MIXER_ADVCTL2_LPBK		0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOut at LineOut */
+  #define MIXER_ADVCTL2_MS		0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */
+  #define MIXER_ADVCTL2_MIX		0x0200 /* Mono output select 0=Mix, 1=Mic; Win driver: "MonoSelectSource"?? */
+  #define MIXER_ADVCTL2_3D		0x2000 /* 3D Enhancement 1=on */
+  #define MIXER_ADVCTL2_POP		0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */
+  
+#define IDX_MIXER_SOMETHING30H	0x30 /* used, but unknown??? */
+
+/* driver internal flags */
+#define SET_CHAN_LEFT	1
+#define SET_CHAN_RIGHT	2
+
+/* helper macro to align I/O port ranges to 32bit I/O width */
+#define AZF_ALIGN(x) (((x) + 3) & (~3))
+
+#endif /* __SOUND_AZT3328_H  */