Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 172 insertions, 0 deletions

diff --git a/sound/soc/codecs/ml26124.h b/sound/soc/codecs/ml26124.h
new file mode 100644
index 000000000..080a6232f
--- /dev/null
+++ b/sound/soc/codecs/ml26124.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
+ */
+
+#ifndef ML26124_H
+#define ML26124_H
+
+/* Clock Control Register */
+#define ML26124_SMPLING_RATE		0x00
+#define ML26124_PLLNL			0x02
+#define ML26124_PLLNH			0x04
+#define ML26124_PLLML			0x06
+#define ML26124_PLLMH			0x08
+#define ML26124_PLLDIV			0x0a
+#define ML26124_CLK_EN			0x0c
+#define ML26124_CLK_CTL			0x0e
+
+/* System Control Register */
+#define ML26124_SW_RST			0x10
+#define ML26124_REC_PLYBAK_RUN		0x12
+#define ML26124_MIC_TIM			0x14
+
+/* Power Mnagement Register */
+#define ML26124_PW_REF_PW_MNG		0x20
+#define ML26124_PW_IN_PW_MNG		0x22
+#define ML26124_PW_DAC_PW_MNG		0x24
+#define ML26124_PW_SPAMP_PW_MNG		0x26
+#define ML26124_PW_LOUT_PW_MNG		0x28
+#define ML26124_PW_VOUT_PW_MNG		0x2a
+#define ML26124_PW_ZCCMP_PW_MNG		0x2e
+
+/* Analog Reference Control Register */
+#define ML26124_PW_MICBIAS_VOL		0x30
+
+/* Input/Output Amplifier Control Register */
+#define ML26124_PW_MIC_IN_VOL		0x32
+#define ML26124_PW_MIC_BOST_VOL		0x38
+#define ML26124_PW_SPK_AMP_VOL		0x3a
+#define ML26124_PW_AMP_VOL_FUNC		0x48
+#define ML26124_PW_AMP_VOL_FADE		0x4a
+
+/* Analog Path Control Register */
+#define ML26124_SPK_AMP_OUT		0x54
+#define ML26124_MIC_IF_CTL		0x5a
+#define ML26124_MIC_SELECT		0xe8
+
+/* Audio Interface Control Register */
+#define ML26124_SAI_TRANS_CTL		0x60
+#define ML26124_SAI_RCV_CTL		0x62
+#define ML26124_SAI_MODE_SEL		0x64
+
+/* DSP Control Register */
+#define ML26124_FILTER_EN		0x66
+#define ML26124_DVOL_CTL		0x68
+#define ML26124_MIXER_VOL_CTL		0x6a
+#define ML26124_RECORD_DIG_VOL		0x6c
+#define ML26124_PLBAK_DIG_VOL		0x70
+#define ML26124_DIGI_BOOST_VOL		0x72
+#define ML26124_EQ_GAIN_BRAND0		0x74
+#define ML26124_EQ_GAIN_BRAND1		0x76
+#define ML26124_EQ_GAIN_BRAND2		0x78
+#define ML26124_EQ_GAIN_BRAND3		0x7a
+#define ML26124_EQ_GAIN_BRAND4		0x7c
+#define ML26124_HPF2_CUTOFF		0x7e
+#define ML26124_EQBRAND0_F0L		0x80
+#define ML26124_EQBRAND0_F0H		0x82
+#define ML26124_EQBRAND0_F1L		0x84
+#define ML26124_EQBRAND0_F1H		0x86
+#define ML26124_EQBRAND1_F0L		0x88
+#define ML26124_EQBRAND1_F0H		0x8a
+#define ML26124_EQBRAND1_F1L		0x8c
+#define ML26124_EQBRAND1_F1H		0x8e
+#define ML26124_EQBRAND2_F0L		0x90
+#define ML26124_EQBRAND2_F0H		0x92
+#define ML26124_EQBRAND2_F1L		0x94
+#define ML26124_EQBRAND2_F1H		0x96
+#define ML26124_EQBRAND3_F0L		0x98
+#define ML26124_EQBRAND3_F0H		0x9a
+#define ML26124_EQBRAND3_F1L		0x9c
+#define ML26124_EQBRAND3_F1H		0x9e
+#define ML26124_EQBRAND4_F0L		0xa0
+#define ML26124_EQBRAND4_F0H		0xa2
+#define ML26124_EQBRAND4_F1L		0xa4
+#define ML26124_EQBRAND4_F1H		0xa6
+
+/* ALC Control Register */
+#define ML26124_ALC_MODE		0xb0
+#define ML26124_ALC_ATTACK_TIM		0xb2
+#define ML26124_ALC_DECAY_TIM		0xb4
+#define ML26124_ALC_HOLD_TIM		0xb6
+#define ML26124_ALC_TARGET_LEV		0xb8
+#define ML26124_ALC_MAXMIN_GAIN		0xba
+#define ML26124_NOIS_GATE_THRSH		0xbc
+#define ML26124_ALC_ZERO_TIMOUT		0xbe
+
+/* Playback Limiter Control Register */
+#define ML26124_PL_ATTACKTIME		0xc0
+#define ML26124_PL_DECAYTIME		0xc2
+#define ML26124_PL_TARGETTIME		0xc4
+#define ML26124_PL_MAXMIN_GAIN		0xc6
+#define ML26124_PLYBAK_BOST_VOL		0xc8
+#define ML26124_PL_0CROSS_TIMOUT	0xca
+
+/* Video Amplifer Control Register */
+#define ML26124_VIDEO_AMP_GAIN_CTL	0xd0
+#define ML26124_VIDEO_AMP_SETUP1	0xd2
+#define ML26124_VIDEO_AMP_CTL2		0xd4
+
+/* Clock select for machine driver */
+#define ML26124_USE_PLL			0
+#define ML26124_USE_MCLKI_256FS		1
+#define ML26124_USE_MCLKI_512FS		2
+#define ML26124_USE_MCLKI_1024FS	3
+
+/* Register Mask */
+#define ML26124_R0_MASK	0xf
+#define ML26124_R2_MASK	0xff
+#define ML26124_R4_MASK	0x1
+#define ML26124_R6_MASK	0xf
+#define ML26124_R8_MASK	0x3f
+#define ML26124_Ra_MASK	0x1f
+#define ML26124_Rc_MASK	0x1f
+#define ML26124_Re_MASK	0x7
+#define ML26124_R10_MASK	0x1
+#define ML26124_R12_MASK	0x17
+#define ML26124_R14_MASK	0x3f
+#define ML26124_R20_MASK	0x47
+#define ML26124_R22_MASK	0xa
+#define ML26124_R24_MASK	0x2
+#define ML26124_R26_MASK	0x1f
+#define ML26124_R28_MASK	0x2
+#define ML26124_R2a_MASK	0x2
+#define ML26124_R2e_MASK	0x2
+#define ML26124_R30_MASK	0x7
+#define ML26124_R32_MASK	0x3f
+#define ML26124_R38_MASK	0x38
+#define ML26124_R3a_MASK	0x3f
+#define ML26124_R48_MASK	0x3
+#define ML26124_R4a_MASK	0x7
+#define ML26124_R54_MASK	0x2a
+#define ML26124_R5a_MASK	0x3
+#define ML26124_Re8_MASK	0x3
+#define ML26124_R60_MASK	0xff
+#define ML26124_R62_MASK	0xff
+#define ML26124_R64_MASK	0x1
+#define ML26124_R66_MASK	0xff
+#define ML26124_R68_MASK	0x3b
+#define ML26124_R6a_MASK	0xf3
+#define ML26124_R6c_MASK	0xff
+#define ML26124_R70_MASK	0xff
+
+#define ML26124_MCLKEN		BIT(0)
+#define ML26124_PLLEN		BIT(1)
+#define ML26124_PLLOE		BIT(2)
+#define ML26124_MCLKOE		BIT(3)
+
+#define ML26124_BLT_ALL_ON	0x1f
+#define ML26124_BLT_PREAMP_ON	0x13
+
+#define ML26124_MICBEN_ON	BIT(2)
+
+enum ml26124_regs {
+	ML26124_MCLK = 0,
+};
+
+enum ml26124_clk_in {
+	ML26124_USE_PLLOUT = 0,
+	ML26124_USE_MCLKI,
+};
+
+#endif