Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 705 insertions, 0 deletions

diff --git a/sound/soc/codecs/pcm186x.c b/sound/soc/codecs/pcm186x.c
new file mode 100644
index 000000000..dd21803ba
--- /dev/null
+++ b/sound/soc/codecs/pcm186x.c
@@ -0,0 +1,705 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments PCM186x Universal Audio ADC
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com
+ *	Andreas Dannenberg <dannenberg@ti.com>
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "pcm186x.h"
+
+static const char * const pcm186x_supply_names[] = {
+	"avdd",		/* Analog power supply. Connect to 3.3-V supply. */
+	"dvdd",		/* Digital power supply. Connect to 3.3-V supply. */
+	"iovdd",	/* I/O power supply. Connect to 3.3-V or 1.8-V. */
+};
+#define PCM186x_NUM_SUPPLIES ARRAY_SIZE(pcm186x_supply_names)
+
+struct pcm186x_priv {
+	struct regmap *regmap;
+	struct regulator_bulk_data supplies[PCM186x_NUM_SUPPLIES];
+	unsigned int sysclk;
+	unsigned int tdm_offset;
+	bool is_tdm_mode;
+	bool is_provider_mode;
+};
+
+static const DECLARE_TLV_DB_SCALE(pcm186x_pga_tlv, -1200, 50, 0);
+
+static const struct snd_kcontrol_new pcm1863_snd_controls[] = {
+	SOC_DOUBLE_R_S_TLV("ADC Capture Volume", PCM186X_PGA_VAL_CH1_L,
+			   PCM186X_PGA_VAL_CH1_R, 0, -24, 80, 7, 0,
+			   pcm186x_pga_tlv),
+};
+
+static const struct snd_kcontrol_new pcm1865_snd_controls[] = {
+	SOC_DOUBLE_R_S_TLV("ADC1 Capture Volume", PCM186X_PGA_VAL_CH1_L,
+			   PCM186X_PGA_VAL_CH1_R, 0, -24, 80, 7, 0,
+			   pcm186x_pga_tlv),
+	SOC_DOUBLE_R_S_TLV("ADC2 Capture Volume", PCM186X_PGA_VAL_CH2_L,
+			   PCM186X_PGA_VAL_CH2_R, 0, -24, 80, 7, 0,
+			   pcm186x_pga_tlv),
+};
+
+static const unsigned int pcm186x_adc_input_channel_sel_value[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+	0x10, 0x20, 0x30
+};
+
+static const char * const pcm186x_adcl_input_channel_sel_text[] = {
+	"No Select",
+	"VINL1[SE]",					/* Default for ADC1L */
+	"VINL2[SE]",					/* Default for ADC2L */
+	"VINL2[SE] + VINL1[SE]",
+	"VINL3[SE]",
+	"VINL3[SE] + VINL1[SE]",
+	"VINL3[SE] + VINL2[SE]",
+	"VINL3[SE] + VINL2[SE] + VINL1[SE]",
+	"VINL4[SE]",
+	"VINL4[SE] + VINL1[SE]",
+	"VINL4[SE] + VINL2[SE]",
+	"VINL4[SE] + VINL2[SE] + VINL1[SE]",
+	"VINL4[SE] + VINL3[SE]",
+	"VINL4[SE] + VINL3[SE] + VINL1[SE]",
+	"VINL4[SE] + VINL3[SE] + VINL2[SE]",
+	"VINL4[SE] + VINL3[SE] + VINL2[SE] + VINL1[SE]",
+	"{VIN1P, VIN1M}[DIFF]",
+	"{VIN4P, VIN4M}[DIFF]",
+	"{VIN1P, VIN1M}[DIFF] + {VIN4P, VIN4M}[DIFF]"
+};
+
+static const char * const pcm186x_adcr_input_channel_sel_text[] = {
+	"No Select",
+	"VINR1[SE]",					/* Default for ADC1R */
+	"VINR2[SE]",					/* Default for ADC2R */
+	"VINR2[SE] + VINR1[SE]",
+	"VINR3[SE]",
+	"VINR3[SE] + VINR1[SE]",
+	"VINR3[SE] + VINR2[SE]",
+	"VINR3[SE] + VINR2[SE] + VINR1[SE]",
+	"VINR4[SE]",
+	"VINR4[SE] + VINR1[SE]",
+	"VINR4[SE] + VINR2[SE]",
+	"VINR4[SE] + VINR2[SE] + VINR1[SE]",
+	"VINR4[SE] + VINR3[SE]",
+	"VINR4[SE] + VINR3[SE] + VINR1[SE]",
+	"VINR4[SE] + VINR3[SE] + VINR2[SE]",
+	"VINR4[SE] + VINR3[SE] + VINR2[SE] + VINR1[SE]",
+	"{VIN2P, VIN2M}[DIFF]",
+	"{VIN3P, VIN3M}[DIFF]",
+	"{VIN2P, VIN2M}[DIFF] + {VIN3P, VIN3M}[DIFF]"
+};
+
+static const struct soc_enum pcm186x_adc_input_channel_sel[] = {
+	SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_L, 0,
+			      PCM186X_ADC_INPUT_SEL_MASK,
+			      ARRAY_SIZE(pcm186x_adcl_input_channel_sel_text),
+			      pcm186x_adcl_input_channel_sel_text,
+			      pcm186x_adc_input_channel_sel_value),
+	SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_R, 0,
+			      PCM186X_ADC_INPUT_SEL_MASK,
+			      ARRAY_SIZE(pcm186x_adcr_input_channel_sel_text),
+			      pcm186x_adcr_input_channel_sel_text,
+			      pcm186x_adc_input_channel_sel_value),
+	SOC_VALUE_ENUM_SINGLE(PCM186X_ADC2_INPUT_SEL_L, 0,
+			      PCM186X_ADC_INPUT_SEL_MASK,
+			      ARRAY_SIZE(pcm186x_adcl_input_channel_sel_text),
+			      pcm186x_adcl_input_channel_sel_text,
+			      pcm186x_adc_input_channel_sel_value),
+	SOC_VALUE_ENUM_SINGLE(PCM186X_ADC2_INPUT_SEL_R, 0,
+			      PCM186X_ADC_INPUT_SEL_MASK,
+			      ARRAY_SIZE(pcm186x_adcr_input_channel_sel_text),
+			      pcm186x_adcr_input_channel_sel_text,
+			      pcm186x_adc_input_channel_sel_value),
+};
+
+static const struct snd_kcontrol_new pcm186x_adc_mux_controls[] = {
+	SOC_DAPM_ENUM("ADC1 Left Input", pcm186x_adc_input_channel_sel[0]),
+	SOC_DAPM_ENUM("ADC1 Right Input", pcm186x_adc_input_channel_sel[1]),
+	SOC_DAPM_ENUM("ADC2 Left Input", pcm186x_adc_input_channel_sel[2]),
+	SOC_DAPM_ENUM("ADC2 Right Input", pcm186x_adc_input_channel_sel[3]),
+};
+
+static const struct snd_soc_dapm_widget pcm1863_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("VINL1"),
+	SND_SOC_DAPM_INPUT("VINR1"),
+	SND_SOC_DAPM_INPUT("VINL2"),
+	SND_SOC_DAPM_INPUT("VINR2"),
+	SND_SOC_DAPM_INPUT("VINL3"),
+	SND_SOC_DAPM_INPUT("VINR3"),
+	SND_SOC_DAPM_INPUT("VINL4"),
+	SND_SOC_DAPM_INPUT("VINR4"),
+
+	SND_SOC_DAPM_MUX("ADC Left Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[0]),
+	SND_SOC_DAPM_MUX("ADC Right Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[1]),
+
+	/*
+	 * Put the codec into SLEEP mode when not in use, allowing the
+	 * Energysense mechanism to operate.
+	 */
+	SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1,  1),
+};
+
+static const struct snd_soc_dapm_widget pcm1865_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("VINL1"),
+	SND_SOC_DAPM_INPUT("VINR1"),
+	SND_SOC_DAPM_INPUT("VINL2"),
+	SND_SOC_DAPM_INPUT("VINR2"),
+	SND_SOC_DAPM_INPUT("VINL3"),
+	SND_SOC_DAPM_INPUT("VINR3"),
+	SND_SOC_DAPM_INPUT("VINL4"),
+	SND_SOC_DAPM_INPUT("VINR4"),
+
+	SND_SOC_DAPM_MUX("ADC1 Left Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[0]),
+	SND_SOC_DAPM_MUX("ADC1 Right Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[1]),
+	SND_SOC_DAPM_MUX("ADC2 Left Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[2]),
+	SND_SOC_DAPM_MUX("ADC2 Right Capture Source", SND_SOC_NOPM, 0, 0,
+			 &pcm186x_adc_mux_controls[3]),
+
+	/*
+	 * Put the codec into SLEEP mode when not in use, allowing the
+	 * Energysense mechanism to operate.
+	 */
+	SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1,  1),
+	SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1,  1),
+};
+
+static const struct snd_soc_dapm_route pcm1863_dapm_routes[] = {
+	{ "ADC Left Capture Source", NULL, "VINL1" },
+	{ "ADC Left Capture Source", NULL, "VINR1" },
+	{ "ADC Left Capture Source", NULL, "VINL2" },
+	{ "ADC Left Capture Source", NULL, "VINR2" },
+	{ "ADC Left Capture Source", NULL, "VINL3" },
+	{ "ADC Left Capture Source", NULL, "VINR3" },
+	{ "ADC Left Capture Source", NULL, "VINL4" },
+	{ "ADC Left Capture Source", NULL, "VINR4" },
+
+	{ "ADC", NULL, "ADC Left Capture Source" },
+
+	{ "ADC Right Capture Source", NULL, "VINL1" },
+	{ "ADC Right Capture Source", NULL, "VINR1" },
+	{ "ADC Right Capture Source", NULL, "VINL2" },
+	{ "ADC Right Capture Source", NULL, "VINR2" },
+	{ "ADC Right Capture Source", NULL, "VINL3" },
+	{ "ADC Right Capture Source", NULL, "VINR3" },
+	{ "ADC Right Capture Source", NULL, "VINL4" },
+	{ "ADC Right Capture Source", NULL, "VINR4" },
+
+	{ "ADC", NULL, "ADC Right Capture Source" },
+};
+
+static const struct snd_soc_dapm_route pcm1865_dapm_routes[] = {
+	{ "ADC1 Left Capture Source", NULL, "VINL1" },
+	{ "ADC1 Left Capture Source", NULL, "VINR1" },
+	{ "ADC1 Left Capture Source", NULL, "VINL2" },
+	{ "ADC1 Left Capture Source", NULL, "VINR2" },
+	{ "ADC1 Left Capture Source", NULL, "VINL3" },
+	{ "ADC1 Left Capture Source", NULL, "VINR3" },
+	{ "ADC1 Left Capture Source", NULL, "VINL4" },
+	{ "ADC1 Left Capture Source", NULL, "VINR4" },
+
+	{ "ADC1", NULL, "ADC1 Left Capture Source" },
+
+	{ "ADC1 Right Capture Source", NULL, "VINL1" },
+	{ "ADC1 Right Capture Source", NULL, "VINR1" },
+	{ "ADC1 Right Capture Source", NULL, "VINL2" },
+	{ "ADC1 Right Capture Source", NULL, "VINR2" },
+	{ "ADC1 Right Capture Source", NULL, "VINL3" },
+	{ "ADC1 Right Capture Source", NULL, "VINR3" },
+	{ "ADC1 Right Capture Source", NULL, "VINL4" },
+	{ "ADC1 Right Capture Source", NULL, "VINR4" },
+
+	{ "ADC1", NULL, "ADC1 Right Capture Source" },
+
+	{ "ADC2 Left Capture Source", NULL, "VINL1" },
+	{ "ADC2 Left Capture Source", NULL, "VINR1" },
+	{ "ADC2 Left Capture Source", NULL, "VINL2" },
+	{ "ADC2 Left Capture Source", NULL, "VINR2" },
+	{ "ADC2 Left Capture Source", NULL, "VINL3" },
+	{ "ADC2 Left Capture Source", NULL, "VINR3" },
+	{ "ADC2 Left Capture Source", NULL, "VINL4" },
+	{ "ADC2 Left Capture Source", NULL, "VINR4" },
+
+	{ "ADC2", NULL, "ADC2 Left Capture Source" },
+
+	{ "ADC2 Right Capture Source", NULL, "VINL1" },
+	{ "ADC2 Right Capture Source", NULL, "VINR1" },
+	{ "ADC2 Right Capture Source", NULL, "VINL2" },
+	{ "ADC2 Right Capture Source", NULL, "VINR2" },
+	{ "ADC2 Right Capture Source", NULL, "VINL3" },
+	{ "ADC2 Right Capture Source", NULL, "VINR3" },
+	{ "ADC2 Right Capture Source", NULL, "VINL4" },
+	{ "ADC2 Right Capture Source", NULL, "VINR4" },
+
+	{ "ADC2", NULL, "ADC2 Right Capture Source" },
+};
+
+static int pcm186x_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+	unsigned int rate = params_rate(params);
+	snd_pcm_format_t format = params_format(params);
+	unsigned int width = params_width(params);
+	unsigned int channels = params_channels(params);
+	unsigned int div_lrck;
+	unsigned int div_bck;
+	u8 tdm_tx_sel = 0;
+	u8 pcm_cfg = 0;
+
+	dev_dbg(component->dev, "%s() rate=%u format=0x%x width=%u channels=%u\n",
+		__func__, rate, format, width, channels);
+
+	switch (width) {
+	case 16:
+		pcm_cfg = PCM186X_PCM_CFG_RX_WLEN_16 <<
+			  PCM186X_PCM_CFG_RX_WLEN_SHIFT |
+			  PCM186X_PCM_CFG_TX_WLEN_16 <<
+			  PCM186X_PCM_CFG_TX_WLEN_SHIFT;
+		break;
+	case 20:
+		pcm_cfg = PCM186X_PCM_CFG_RX_WLEN_20 <<
+			  PCM186X_PCM_CFG_RX_WLEN_SHIFT |
+			  PCM186X_PCM_CFG_TX_WLEN_20 <<
+			  PCM186X_PCM_CFG_TX_WLEN_SHIFT;
+		break;
+	case 24:
+		pcm_cfg = PCM186X_PCM_CFG_RX_WLEN_24 <<
+			  PCM186X_PCM_CFG_RX_WLEN_SHIFT |
+			  PCM186X_PCM_CFG_TX_WLEN_24 <<
+			  PCM186X_PCM_CFG_TX_WLEN_SHIFT;
+		break;
+	case 32:
+		pcm_cfg = PCM186X_PCM_CFG_RX_WLEN_32 <<
+			  PCM186X_PCM_CFG_RX_WLEN_SHIFT |
+			  PCM186X_PCM_CFG_TX_WLEN_32 <<
+			  PCM186X_PCM_CFG_TX_WLEN_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, PCM186X_PCM_CFG,
+			    PCM186X_PCM_CFG_RX_WLEN_MASK |
+			    PCM186X_PCM_CFG_TX_WLEN_MASK,
+			    pcm_cfg);
+
+	div_lrck = width * channels;
+
+	if (priv->is_tdm_mode) {
+		/* Select TDM transmission data */
+		switch (channels) {
+		case 2:
+			tdm_tx_sel = PCM186X_TDM_TX_SEL_2CH;
+			break;
+		case 4:
+			tdm_tx_sel = PCM186X_TDM_TX_SEL_4CH;
+			break;
+		case 6:
+			tdm_tx_sel = PCM186X_TDM_TX_SEL_6CH;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		snd_soc_component_update_bits(component, PCM186X_TDM_TX_SEL,
+				    PCM186X_TDM_TX_SEL_MASK, tdm_tx_sel);
+
+		/* In DSP/TDM mode, the LRCLK divider must be 256 */
+		div_lrck = 256;
+
+		/* Configure 1/256 duty cycle for LRCK */
+		snd_soc_component_update_bits(component, PCM186X_PCM_CFG,
+				    PCM186X_PCM_CFG_TDM_LRCK_MODE,
+				    PCM186X_PCM_CFG_TDM_LRCK_MODE);
+	}
+
+	/* Only configure clock dividers in provider mode. */
+	if (priv->is_provider_mode) {
+		div_bck = priv->sysclk / (div_lrck * rate);
+
+		dev_dbg(component->dev,
+			"%s() master_clk=%u div_bck=%u div_lrck=%u\n",
+			__func__, priv->sysclk, div_bck, div_lrck);
+
+		snd_soc_component_write(component, PCM186X_BCK_DIV, div_bck - 1);
+		snd_soc_component_write(component, PCM186X_LRK_DIV, div_lrck - 1);
+	}
+
+	return 0;
+}
+
+static int pcm186x_set_fmt(struct snd_soc_dai *dai, unsigned int format)
+{
+	struct snd_soc_component *component = dai->component;
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+	u8 clk_ctrl = 0;
+	u8 pcm_cfg = 0;
+
+	dev_dbg(component->dev, "%s() format=0x%x\n", __func__, format);
+
+	switch (format & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_CBP_CFP:
+		if (!priv->sysclk) {
+			dev_err(component->dev, "operating in provider mode requires sysclock to be configured\n");
+			return -EINVAL;
+		}
+		clk_ctrl |= PCM186X_CLK_CTRL_MST_MODE;
+		priv->is_provider_mode = true;
+		break;
+	case SND_SOC_DAIFMT_CBC_CFC:
+		priv->is_provider_mode = false;
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI master/slave interface\n");
+		return -EINVAL;
+	}
+
+	/* set interface polarity */
+	switch (format & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		dev_err(component->dev, "Inverted DAI clocks not supported\n");
+		return -EINVAL;
+	}
+
+	/* set interface format */
+	switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		pcm_cfg = PCM186X_PCM_CFG_FMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		pcm_cfg = PCM186X_PCM_CFG_FMT_LEFTJ;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		priv->tdm_offset += 1;
+		fallthrough;
+		/* DSP_A uses the same basic config as DSP_B
+		 * except we need to shift the TDM output by one BCK cycle
+		 */
+	case SND_SOC_DAIFMT_DSP_B:
+		priv->is_tdm_mode = true;
+		pcm_cfg = PCM186X_PCM_CFG_FMT_TDM;
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI format\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, PCM186X_CLK_CTRL,
+			    PCM186X_CLK_CTRL_MST_MODE, clk_ctrl);
+
+	snd_soc_component_write(component, PCM186X_TDM_TX_OFFSET, priv->tdm_offset);
+
+	snd_soc_component_update_bits(component, PCM186X_PCM_CFG,
+			    PCM186X_PCM_CFG_FMT_MASK, pcm_cfg);
+
+	return 0;
+}
+
+static int pcm186x_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+				unsigned int rx_mask, int slots, int slot_width)
+{
+	struct snd_soc_component *component = dai->component;
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+	unsigned int first_slot, last_slot, tdm_offset;
+
+	dev_dbg(component->dev,
+		"%s() tx_mask=0x%x rx_mask=0x%x slots=%d slot_width=%d\n",
+		__func__, tx_mask, rx_mask, slots, slot_width);
+
+	if (!tx_mask) {
+		dev_err(component->dev, "tdm tx mask must not be 0\n");
+		return -EINVAL;
+	}
+
+	first_slot = __ffs(tx_mask);
+	last_slot = __fls(tx_mask);
+
+	if (last_slot - first_slot != hweight32(tx_mask) - 1) {
+		dev_err(component->dev, "tdm tx mask must be contiguous\n");
+		return -EINVAL;
+	}
+
+	tdm_offset = first_slot * slot_width;
+
+	if (tdm_offset > 255) {
+		dev_err(component->dev, "tdm tx slot selection out of bounds\n");
+		return -EINVAL;
+	}
+
+	priv->tdm_offset = tdm_offset;
+
+	return 0;
+}
+
+static int pcm186x_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
+				  unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = dai->component;
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+
+	dev_dbg(component->dev, "%s() clk_id=%d freq=%u dir=%d\n",
+		__func__, clk_id, freq, dir);
+
+	priv->sysclk = freq;
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops pcm186x_dai_ops = {
+	.set_sysclk = pcm186x_set_dai_sysclk,
+	.set_tdm_slot = pcm186x_set_tdm_slot,
+	.set_fmt = pcm186x_set_fmt,
+	.hw_params = pcm186x_hw_params,
+};
+
+static struct snd_soc_dai_driver pcm1863_dai = {
+	.name = "pcm1863-aif",
+	.capture = {
+		 .stream_name = "Capture",
+		 .channels_min = 1,
+		 .channels_max = 2,
+		 .rates = PCM186X_RATES,
+		 .formats = PCM186X_FORMATS,
+	 },
+	.ops = &pcm186x_dai_ops,
+};
+
+static struct snd_soc_dai_driver pcm1865_dai = {
+	.name = "pcm1865-aif",
+	.capture = {
+		 .stream_name = "Capture",
+		 .channels_min = 1,
+		 .channels_max = 4,
+		 .rates = PCM186X_RATES,
+		 .formats = PCM186X_FORMATS,
+	 },
+	.ops = &pcm186x_dai_ops,
+};
+
+static int pcm186x_power_on(struct snd_soc_component *component)
+{
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies),
+				    priv->supplies);
+	if (ret)
+		return ret;
+
+	regcache_cache_only(priv->regmap, false);
+	ret = regcache_sync(priv->regmap);
+	if (ret) {
+		dev_err(component->dev, "Failed to restore cache\n");
+		regcache_cache_only(priv->regmap, true);
+		regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
+				       priv->supplies);
+		return ret;
+	}
+
+	snd_soc_component_update_bits(component, PCM186X_POWER_CTRL,
+			    PCM186X_PWR_CTRL_PWRDN, 0);
+
+	return 0;
+}
+
+static int pcm186x_power_off(struct snd_soc_component *component)
+{
+	struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component);
+
+	snd_soc_component_update_bits(component, PCM186X_POWER_CTRL,
+			    PCM186X_PWR_CTRL_PWRDN, PCM186X_PWR_CTRL_PWRDN);
+
+	regcache_cache_only(priv->regmap, true);
+
+	return regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
+				     priv->supplies);
+}
+
+static int pcm186x_set_bias_level(struct snd_soc_component *component,
+				  enum snd_soc_bias_level level)
+{
+	dev_dbg(component->dev, "## %s: %d -> %d\n", __func__,
+		snd_soc_component_get_bias_level(component), level);
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF)
+			pcm186x_power_on(component);
+		break;
+	case SND_SOC_BIAS_OFF:
+		pcm186x_power_off(component);
+		break;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_component_driver soc_codec_dev_pcm1863 = {
+	.set_bias_level		= pcm186x_set_bias_level,
+	.controls		= pcm1863_snd_controls,
+	.num_controls		= ARRAY_SIZE(pcm1863_snd_controls),
+	.dapm_widgets		= pcm1863_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(pcm1863_dapm_widgets),
+	.dapm_routes		= pcm1863_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(pcm1863_dapm_routes),
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static struct snd_soc_component_driver soc_codec_dev_pcm1865 = {
+	.set_bias_level		= pcm186x_set_bias_level,
+	.controls		= pcm1865_snd_controls,
+	.num_controls		= ARRAY_SIZE(pcm1865_snd_controls),
+	.dapm_widgets		= pcm1865_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(pcm1865_dapm_widgets),
+	.dapm_routes		= pcm1865_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(pcm1865_dapm_routes),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static bool pcm186x_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case PCM186X_PAGE:
+	case PCM186X_DEVICE_STATUS:
+	case PCM186X_FSAMPLE_STATUS:
+	case PCM186X_DIV_STATUS:
+	case PCM186X_CLK_STATUS:
+	case PCM186X_SUPPLY_STATUS:
+	case PCM186X_MMAP_STAT_CTRL:
+	case PCM186X_MMAP_ADDRESS:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_range_cfg pcm186x_range = {
+	.name = "Pages",
+	.range_max = PCM186X_MAX_REGISTER,
+	.selector_reg = PCM186X_PAGE,
+	.selector_mask = 0xff,
+	.window_len = PCM186X_PAGE_LEN,
+};
+
+const struct regmap_config pcm186x_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.volatile_reg = pcm186x_volatile,
+
+	.ranges = &pcm186x_range,
+	.num_ranges = 1,
+
+	.max_register = PCM186X_MAX_REGISTER,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_GPL(pcm186x_regmap);
+
+int pcm186x_probe(struct device *dev, enum pcm186x_type type, int irq,
+		  struct regmap *regmap)
+{
+	struct pcm186x_priv *priv;
+	int i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct pcm186x_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->regmap = regmap;
+
+	for (i = 0; i < ARRAY_SIZE(priv->supplies); i++)
+		priv->supplies[i].supply = pcm186x_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+				      priv->supplies);
+	if (ret) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies),
+				    priv->supplies);
+	if (ret) {
+		dev_err(dev, "failed enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	/* Reset device registers for a consistent power-on like state */
+	ret = regmap_write(regmap, PCM186X_PAGE, PCM186X_RESET);
+	if (ret) {
+		dev_err(dev, "failed to write device: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
+				     priv->supplies);
+	if (ret) {
+		dev_err(dev, "failed disable supplies: %d\n", ret);
+		return ret;
+	}
+
+	switch (type) {
+	case PCM1865:
+	case PCM1864:
+		ret = devm_snd_soc_register_component(dev, &soc_codec_dev_pcm1865,
+					     &pcm1865_dai, 1);
+		break;
+	case PCM1863:
+	case PCM1862:
+	default:
+		ret = devm_snd_soc_register_component(dev, &soc_codec_dev_pcm1863,
+					     &pcm1863_dai, 1);
+	}
+	if (ret) {
+		dev_err(dev, "failed to register CODEC: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcm186x_probe);
+
+MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("PCM186x Universal Audio ADC driver");
+MODULE_LICENSE("GPL v2");