Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 164 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt1019.h b/sound/soc/codecs/rt1019.h
new file mode 100644
index 000000000..48ba15efb
--- /dev/null
+++ b/sound/soc/codecs/rt1019.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * rt1019.h  --  RT1019 ALSA SoC audio amplifier driver
+ *
+ * Copyright(c) 2021 Realtek Semiconductor Corp.
+ */
+
+#ifndef __RT1019_H__
+#define __RT1019_H__
+
+#define RT1019_DEVICE_ID_VAL			0x1019
+#define RT1019_DEVICE_ID_VAL2			0x6731
+
+#define RT1019_RESET				0x0000
+#define RT1019_IDS_CTRL				0x0011
+#define RT1019_ASEL_CTRL			0x0013
+#define RT1019_PWR_STRP_2			0x0019
+#define RT1019_BEEP_TONE			0x001b
+#define RT1019_VER_ID				0x005c
+#define RT1019_VEND_ID_1			0x005e
+#define RT1019_VEND_ID_2			0x005f
+#define RT1019_DEV_ID_1				0x0061
+#define RT1019_DEV_ID_2				0x0062
+#define RT1019_SDB_CTRL				0x0066
+#define RT1019_CLK_TREE_1			0x0100
+#define RT1019_CLK_TREE_2			0x0101
+#define RT1019_CLK_TREE_3			0x0102
+#define RT1019_PLL_1				0x0311
+#define RT1019_PLL_2				0x0312
+#define RT1019_PLL_3				0x0313
+#define RT1019_TDM_1				0x0400
+#define RT1019_TDM_2				0x0401
+#define RT1019_TDM_3				0x0402
+#define RT1019_DMIX_MONO_1			0x0504
+#define RT1019_DMIX_MONO_2			0x0505
+#define RT1019_BEEP_1				0x0b00
+#define RT1019_BEEP_2				0x0b01
+
+/* 0x0019 Power On Strap Control-2 */
+#define RT1019_AUTO_BITS_SEL_MASK		(0x1 << 5)
+#define RT1019_AUTO_BITS_SEL_AUTO		(0x1 << 5)
+#define RT1019_AUTO_BITS_SEL_MANU		(0x0 << 5)
+#define RT1019_AUTO_CLK_SEL_MASK		(0x1 << 4)
+#define RT1019_AUTO_CLK_SEL_AUTO		(0x1 << 4)
+#define RT1019_AUTO_CLK_SEL_MANU		(0x0 << 4)
+
+/* 0x0100 Clock Tree Control-1 */
+#define RT1019_CLK_SYS_PRE_SEL_MASK		(0x1 << 7)
+#define RT1019_CLK_SYS_PRE_SEL_SFT		7
+#define RT1019_CLK_SYS_PRE_SEL_BCLK		(0x0 << 7)
+#define RT1019_CLK_SYS_PRE_SEL_PLL		(0x1 << 7)
+#define RT1019_PLL_SRC_MASK				(0x1 << 4)
+#define RT1019_PLL_SRC_SFT				4
+#define RT1019_PLL_SRC_SEL_BCLK			(0x0 << 4)
+#define RT1019_PLL_SRC_SEL_RC			(0x1 << 4)
+#define RT1019_SEL_FIFO_MASK			(0x3 << 2)
+#define RT1019_SEL_FIFO_DIV1			(0x0 << 2)
+#define RT1019_SEL_FIFO_DIV2			(0x1 << 2)
+#define RT1019_SEL_FIFO_DIV4			(0x2 << 2)
+
+/* 0x0101 clock tree control-2 */
+#define RT1019_SYS_DIV_DA_FIL_MASK		(0x7 << 5)
+#define RT1019_SYS_DIV_DA_FIL_DIV1		(0x2 << 5)
+#define RT1019_SYS_DIV_DA_FIL_DIV2		(0x3 << 5)
+#define RT1019_SYS_DIV_DA_FIL_DIV4		(0x4 << 5)
+#define RT1019_SYS_DA_OSR_MASK			(0x3 << 2)
+#define RT1019_SYS_DA_OSR_DIV1			(0x0 << 2)
+#define RT1019_SYS_DA_OSR_DIV2			(0x1 << 2)
+#define RT1019_SYS_DA_OSR_DIV4			(0x2 << 2)
+#define RT1019_ASRC_256FS_MASK			0x3
+#define RT1019_ASRC_256FS_DIV1			0x0
+#define RT1019_ASRC_256FS_DIV2			0x1
+#define RT1019_ASRC_256FS_DIV4			0x2
+
+/* 0x0102 clock tree control-3 */
+#define RT1019_SEL_CLK_CAL_MASK			(0x3 << 6)
+#define RT1019_SEL_CLK_CAL_DIV1			(0x0 << 6)
+#define RT1019_SEL_CLK_CAL_DIV2			(0x1 << 6)
+#define RT1019_SEL_CLK_CAL_DIV4			(0x2 << 6)
+
+/* 0x0311 PLL-1 */
+#define RT1019_PLL_M_MASK			(0xf << 4)
+#define RT1019_PLL_M_SFT			4
+#define RT1019_PLL_M_BP_MASK		(0x1 << 1)
+#define RT1019_PLL_M_BP_SFT			1
+#define RT1019_PLL_Q_8_8_MASK		(0x1)
+
+/* 0x0312 PLL-2 */
+#define RT1019_PLL_Q_7_0_MASK		0xff
+
+/* 0x0313 PLL-3 */
+#define RT1019_PLL_K_MASK		0x1f
+
+/* 0x0400 TDM Control-1 */
+#define RT1019_TDM_BCLK_MASK		(0x1 << 6)
+#define RT1019_TDM_BCLK_NORM		(0x0 << 6)
+#define RT1019_TDM_BCLK_INV			(0x1 << 6)
+#define RT1019_TDM_CL_MASK			(0x7)
+#define RT1019_TDM_CL_8				(0x4)
+#define RT1019_TDM_CL_32			(0x3)
+#define RT1019_TDM_CL_24			(0x2)
+#define RT1019_TDM_CL_20			(0x1)
+#define RT1019_TDM_CL_16			(0x0)
+
+/* 0x0401 TDM Control-2 */
+#define RT1019_I2S_CH_TX_MASK		(0x3 << 6)
+#define RT1019_I2S_CH_TX_SFT		6
+#define RT1019_I2S_TX_2CH			(0x0 << 6)
+#define RT1019_I2S_TX_4CH			(0x1 << 6)
+#define RT1019_I2S_TX_6CH			(0x2 << 6)
+#define RT1019_I2S_TX_8CH			(0x3 << 6)
+#define RT1019_I2S_DF_MASK			(0x7 << 3)
+#define RT1019_I2S_DF_SFT			3
+#define RT1019_I2S_DF_I2S			(0x0 << 3)
+#define RT1019_I2S_DF_LEFT			(0x1 << 3)
+#define RT1019_I2S_DF_PCM_A_R		(0x2 << 3)
+#define RT1019_I2S_DF_PCM_B_R		(0x3 << 3)
+#define RT1019_I2S_DF_PCM_A_F		(0x6 << 3)
+#define RT1019_I2S_DF_PCM_B_F		(0x7 << 3)
+#define RT1019_I2S_DL_MASK			0x7
+#define RT1019_I2S_DL_SFT			0
+#define RT1019_I2S_DL_16			0x0
+#define RT1019_I2S_DL_20			0x1
+#define RT1019_I2S_DL_24			0x2
+#define RT1019_I2S_DL_32			0x3
+#define RT1019_I2S_DL_8				0x4
+
+/* TDM1 Control-3 (0x0402) */
+#define RT1019_TDM_I2S_TX_L_DAC1_1_MASK		(0x7 << 4)
+#define RT1019_TDM_I2S_TX_R_DAC1_1_MASK		0x7
+#define RT1019_TDM_I2S_TX_L_DAC1_1_SFT		4
+#define RT1019_TDM_I2S_TX_R_DAC1_1_SFT		0
+
+/* System Clock Source */
+enum {
+	RT1019_SCLK_S_BCLK,
+	RT1019_SCLK_S_PLL,
+};
+
+/* PLL1 Source */
+enum {
+	RT1019_PLL_S_BCLK,
+	RT1019_PLL_S_RC25M,
+};
+
+enum {
+	RT1019_AIF1,
+	RT1019_AIFS
+};
+
+struct rt1019_priv {
+	struct snd_soc_component *component;
+	struct regmap *regmap;
+	int sysclk;
+	int sysclk_src;
+	int lrck;
+	int bclk;
+	int pll_src;
+	int pll_in;
+	int pll_out;
+	unsigned int bclk_ratio;
+};
+
+#endif /* __RT1019_H__ */