Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 486 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c
new file mode 100644
index 000000000..88a8392a5
--- /dev/null
+++ b/sound/soc/codecs/rt711-sdca-sdw.c
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// rt711-sdw-sdca.c -- rt711 SDCA ALSA SoC audio driver
+//
+// Copyright(c) 2021 Realtek Semiconductor Corp.
+//
+//
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "rt711-sdca.h"
+#include "rt711-sdca-sdw.h"
+
+static bool rt711_sdca_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x201a ... 0x2027:
+	case 0x2029 ... 0x202a:
+	case 0x202d ... 0x2034:
+	case 0x2200 ... 0x2204:
+	case 0x2206 ... 0x2212:
+	case 0x2220 ... 0x2223:
+	case 0x2230 ... 0x2239:
+	case 0x2f01 ... 0x2f0f:
+	case 0x2f30 ... 0x2f36:
+	case 0x2f50 ... 0x2f5a:
+	case 0x2f60:
+	case 0x3200 ... 0x3212:
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_SELECTED_MODE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_DETECTED_MODE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ...
+		SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0):
+	case RT711_BUF_ADDR_HID1 ... RT711_BUF_ADDR_HID2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rt711_sdca_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x201b:
+	case 0x201c:
+	case 0x201d:
+	case 0x201f:
+	case 0x2021:
+	case 0x2023:
+	case 0x2230:
+	case 0x202d ... 0x202f: /* BRA */
+	case 0x2200 ... 0x2212: /* i2c debug */
+	case RT711_RC_CAL_STATUS:
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_DETECTED_MODE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ...
+		SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0):
+	case RT711_BUF_ADDR_HID1 ... RT711_BUF_ADDR_HID2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rt711_sdca_mbq_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x2000000 ... 0x20000ff:
+	case 0x5600000 ... 0x56000ff:
+	case 0x5700000 ... 0x57000ff:
+	case 0x5800000 ... 0x58000ff:
+	case 0x5900000 ... 0x59000ff:
+	case 0x5b00000 ... 0x5b000ff:
+	case 0x5f00000 ... 0x5f000ff:
+	case 0x6100000 ... 0x61000ff:
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU05, RT711_SDCA_CTL_FU_VOLUME, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU05, RT711_SDCA_CTL_FU_VOLUME, CH_R):
+	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_USER_FU1E, RT711_SDCA_CTL_FU_VOLUME, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_USER_FU1E, RT711_SDCA_CTL_FU_VOLUME, CH_R):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU0F, RT711_SDCA_CTL_FU_VOLUME, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU0F, RT711_SDCA_CTL_FU_VOLUME, CH_R):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_PLATFORM_FU44, RT711_SDCA_CTL_FU_CH_GAIN, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_PLATFORM_FU44, RT711_SDCA_CTL_FU_CH_GAIN, CH_R):
+	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_PLATFORM_FU15, RT711_SDCA_CTL_FU_CH_GAIN, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_PLATFORM_FU15, RT711_SDCA_CTL_FU_CH_GAIN, CH_R):
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rt711_sdca_mbq_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x2000000:
+	case 0x200001a:
+	case 0x2000046:
+	case 0x2000080:
+	case 0x2000081:
+	case 0x2000083:
+	case 0x5800000:
+	case 0x5800001:
+	case 0x5f00001:
+	case 0x6100008:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config rt711_sdca_regmap = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.readable_reg = rt711_sdca_readable_register,
+	.volatile_reg = rt711_sdca_volatile_register,
+	.max_register = 0x44ffffff,
+	.reg_defaults = rt711_sdca_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rt711_sdca_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static const struct regmap_config rt711_sdca_mbq_regmap = {
+	.name = "sdw-mbq",
+	.reg_bits = 32,
+	.val_bits = 16,
+	.readable_reg = rt711_sdca_mbq_readable_register,
+	.volatile_reg = rt711_sdca_mbq_volatile_register,
+	.max_register = 0x40800f12,
+	.reg_defaults = rt711_sdca_mbq_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rt711_sdca_mbq_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int rt711_sdca_update_status(struct sdw_slave *slave,
+				enum sdw_slave_status status)
+{
+	struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
+
+	/* Update the status */
+	rt711->status = status;
+
+	if (status == SDW_SLAVE_UNATTACHED)
+		rt711->hw_init = false;
+
+	if (status == SDW_SLAVE_ATTACHED) {
+		if (rt711->hs_jack) {
+			/*
+			 * Due to the SCP_SDCA_INTMASK will be cleared by any reset, and then
+			 * if the device attached again, we will need to set the setting back.
+			 * It could avoid losing the jack detection interrupt.
+			 * This also could sync with the cache value as the rt711_sdca_jack_init set.
+			 */
+			sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INTMASK1,
+				SDW_SCP_SDCA_INTMASK_SDCA_0);
+			sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INTMASK2,
+				SDW_SCP_SDCA_INTMASK_SDCA_8);
+		}
+	}
+
+	/*
+	 * Perform initialization only if slave status is present and
+	 * hw_init flag is false
+	 */
+	if (rt711->hw_init || rt711->status != SDW_SLAVE_ATTACHED)
+		return 0;
+
+	/* perform I/O transfers required for Slave initialization */
+	return rt711_sdca_io_init(&slave->dev, slave);
+}
+
+static int rt711_sdca_read_prop(struct sdw_slave *slave)
+{
+	struct sdw_slave_prop *prop = &slave->prop;
+	int nval;
+	int i, j;
+	u32 bit;
+	unsigned long addr;
+	struct sdw_dpn_prop *dpn;
+
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+	prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+	prop->is_sdca = true;
+
+	prop->paging_support = true;
+
+	/* first we need to allocate memory for set bits in port lists */
+	prop->source_ports = 0x14; /* BITMAP: 00010100 */
+	prop->sink_ports = 0x8; /* BITMAP:  00001000 */
+
+	nval = hweight32(prop->source_ports);
+	prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->src_dpn_prop), GFP_KERNEL);
+	if (!prop->src_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->src_dpn_prop;
+	addr = prop->source_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].simple_ch_prep_sm = true;
+		dpn[i].ch_prep_timeout = 10;
+		i++;
+	}
+
+	/* do this again for sink now */
+	nval = hweight32(prop->sink_ports);
+	prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
+	if (!prop->sink_dpn_prop)
+		return -ENOMEM;
+
+	j = 0;
+	dpn = prop->sink_dpn_prop;
+	addr = prop->sink_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[j].num = bit;
+		dpn[j].type = SDW_DPN_FULL;
+		dpn[j].simple_ch_prep_sm = true;
+		dpn[j].ch_prep_timeout = 10;
+		j++;
+	}
+
+	/* set the timeout values */
+	prop->clk_stop_timeout = 700;
+
+	/* wake-up event */
+	prop->wake_capable = 1;
+
+	return 0;
+}
+
+static int rt711_sdca_interrupt_callback(struct sdw_slave *slave,
+					struct sdw_slave_intr_status *status)
+{
+	struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
+	int ret, stat;
+	int count = 0, retry = 3;
+	unsigned int sdca_cascade, scp_sdca_stat1, scp_sdca_stat2 = 0;
+
+	dev_dbg(&slave->dev,
+		"%s control_port_stat=%x, sdca_cascade=%x", __func__,
+		status->control_port, status->sdca_cascade);
+
+	if (cancel_delayed_work_sync(&rt711->jack_detect_work)) {
+		dev_warn(&slave->dev, "%s the pending delayed_work was cancelled", __func__);
+		/* avoid the HID owner doesn't change to device */
+		if (rt711->scp_sdca_stat2)
+			scp_sdca_stat2 = rt711->scp_sdca_stat2;
+	}
+
+	/*
+	 * The critical section below intentionally protects a rather large piece of code.
+	 * We don't want to allow the system suspend to disable an interrupt while we are
+	 * processing it, which could be problematic given the quirky SoundWire interrupt
+	 * scheme. We do want however to prevent new workqueues from being scheduled if
+	 * the disable_irq flag was set during system suspend.
+	 */
+	mutex_lock(&rt711->disable_irq_lock);
+
+	ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
+	if (ret < 0)
+		goto io_error;
+	rt711->scp_sdca_stat1 = ret;
+	ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
+	if (ret < 0)
+		goto io_error;
+	rt711->scp_sdca_stat2 = ret;
+	if (scp_sdca_stat2)
+		rt711->scp_sdca_stat2 |= scp_sdca_stat2;
+
+	do {
+		/* clear flag */
+		ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
+		if (ret < 0)
+			goto io_error;
+		if (ret & SDW_SCP_SDCA_INTMASK_SDCA_0) {
+			ret = sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INT1,
+						SDW_SCP_SDCA_INTMASK_SDCA_0);
+			if (ret < 0)
+				goto io_error;
+		}
+		ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
+		if (ret < 0)
+			goto io_error;
+		if (ret & SDW_SCP_SDCA_INTMASK_SDCA_8) {
+			ret = sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INT2,
+						SDW_SCP_SDCA_INTMASK_SDCA_8);
+			if (ret < 0)
+				goto io_error;
+		}
+
+		/* check if flag clear or not */
+		ret = sdw_read_no_pm(rt711->slave, SDW_DP0_INT);
+		if (ret < 0)
+			goto io_error;
+		sdca_cascade = ret & SDW_DP0_SDCA_CASCADE;
+
+		ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
+		if (ret < 0)
+			goto io_error;
+		scp_sdca_stat1 = ret & SDW_SCP_SDCA_INTMASK_SDCA_0;
+
+		ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
+		if (ret < 0)
+			goto io_error;
+		scp_sdca_stat2 = ret & SDW_SCP_SDCA_INTMASK_SDCA_8;
+
+		stat = scp_sdca_stat1 || scp_sdca_stat2 || sdca_cascade;
+
+		count++;
+	} while (stat != 0 && count < retry);
+
+	if (stat)
+		dev_warn(&slave->dev,
+			"%s scp_sdca_stat1=0x%x, scp_sdca_stat2=0x%x\n", __func__,
+			rt711->scp_sdca_stat1, rt711->scp_sdca_stat2);
+
+	if (status->sdca_cascade && !rt711->disable_irq)
+		mod_delayed_work(system_power_efficient_wq,
+			&rt711->jack_detect_work, msecs_to_jiffies(30));
+
+	mutex_unlock(&rt711->disable_irq_lock);
+
+	return 0;
+
+io_error:
+	mutex_unlock(&rt711->disable_irq_lock);
+	pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret);
+	return ret;
+}
+
+static struct sdw_slave_ops rt711_sdca_slave_ops = {
+	.read_prop = rt711_sdca_read_prop,
+	.interrupt_callback = rt711_sdca_interrupt_callback,
+	.update_status = rt711_sdca_update_status,
+};
+
+static int rt711_sdca_sdw_probe(struct sdw_slave *slave,
+				const struct sdw_device_id *id)
+{
+	struct regmap *regmap, *mbq_regmap;
+
+	/* Regmap Initialization */
+	mbq_regmap = devm_regmap_init_sdw_mbq(slave, &rt711_sdca_mbq_regmap);
+	if (IS_ERR(mbq_regmap))
+		return PTR_ERR(mbq_regmap);
+
+	regmap = devm_regmap_init_sdw(slave, &rt711_sdca_regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return rt711_sdca_init(&slave->dev, regmap, mbq_regmap, slave);
+}
+
+static int rt711_sdca_sdw_remove(struct sdw_slave *slave)
+{
+	struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
+
+	if (rt711->hw_init) {
+		cancel_delayed_work_sync(&rt711->jack_detect_work);
+		cancel_delayed_work_sync(&rt711->jack_btn_check_work);
+	}
+
+	if (rt711->first_hw_init)
+		pm_runtime_disable(&slave->dev);
+
+	mutex_destroy(&rt711->calibrate_mutex);
+	mutex_destroy(&rt711->disable_irq_lock);
+
+	return 0;
+}
+
+static const struct sdw_device_id rt711_sdca_id[] = {
+	SDW_SLAVE_ENTRY_EXT(0x025d, 0x711, 0x3, 0x1, 0),
+	{},
+};
+MODULE_DEVICE_TABLE(sdw, rt711_sdca_id);
+
+static int __maybe_unused rt711_sdca_dev_suspend(struct device *dev)
+{
+	struct rt711_sdca_priv *rt711 = dev_get_drvdata(dev);
+
+	if (!rt711->hw_init)
+		return 0;
+
+	cancel_delayed_work_sync(&rt711->jack_detect_work);
+	cancel_delayed_work_sync(&rt711->jack_btn_check_work);
+
+	regcache_cache_only(rt711->regmap, true);
+	regcache_cache_only(rt711->mbq_regmap, true);
+
+	return 0;
+}
+
+static int __maybe_unused rt711_sdca_dev_system_suspend(struct device *dev)
+{
+	struct rt711_sdca_priv *rt711_sdca = dev_get_drvdata(dev);
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	int ret1, ret2;
+
+	if (!rt711_sdca->hw_init)
+		return 0;
+
+	/*
+	 * prevent new interrupts from being handled after the
+	 * deferred work completes and before the parent disables
+	 * interrupts on the link
+	 */
+	mutex_lock(&rt711_sdca->disable_irq_lock);
+	rt711_sdca->disable_irq = true;
+	ret1 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK1,
+				SDW_SCP_SDCA_INTMASK_SDCA_0, 0);
+	ret2 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK2,
+				SDW_SCP_SDCA_INTMASK_SDCA_8, 0);
+	mutex_unlock(&rt711_sdca->disable_irq_lock);
+
+	if (ret1 < 0 || ret2 < 0) {
+		/* log but don't prevent suspend from happening */
+		dev_dbg(&slave->dev, "%s: could not disable SDCA interrupts\n:", __func__);
+	}
+
+	return rt711_sdca_dev_suspend(dev);
+}
+
+#define RT711_PROBE_TIMEOUT 5000
+
+static int __maybe_unused rt711_sdca_dev_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct rt711_sdca_priv *rt711 = dev_get_drvdata(dev);
+	unsigned long time;
+
+	if (!rt711->first_hw_init)
+		return 0;
+
+	if (!slave->unattach_request)
+		goto regmap_sync;
+
+	time = wait_for_completion_timeout(&slave->initialization_complete,
+				msecs_to_jiffies(RT711_PROBE_TIMEOUT));
+	if (!time) {
+		dev_err(&slave->dev, "Initialization not complete, timed out\n");
+		sdw_show_ping_status(slave->bus, true);
+
+		return -ETIMEDOUT;
+	}
+
+regmap_sync:
+	slave->unattach_request = 0;
+	regcache_cache_only(rt711->regmap, false);
+	regcache_sync(rt711->regmap);
+	regcache_cache_only(rt711->mbq_regmap, false);
+	regcache_sync(rt711->mbq_regmap);
+	return 0;
+}
+
+static const struct dev_pm_ops rt711_sdca_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(rt711_sdca_dev_system_suspend, rt711_sdca_dev_resume)
+	SET_RUNTIME_PM_OPS(rt711_sdca_dev_suspend, rt711_sdca_dev_resume, NULL)
+};
+
+static struct sdw_driver rt711_sdca_sdw_driver = {
+	.driver = {
+		.name = "rt711-sdca",
+		.owner = THIS_MODULE,
+		.pm = &rt711_sdca_pm,
+	},
+	.probe = rt711_sdca_sdw_probe,
+	.remove = rt711_sdca_sdw_remove,
+	.ops = &rt711_sdca_slave_ops,
+	.id_table = rt711_sdca_id,
+};
+module_sdw_driver(rt711_sdca_sdw_driver);
+
+MODULE_DESCRIPTION("ASoC RT711 SDCA SDW driver");
+MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
+MODULE_LICENSE("GPL");