Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 813 insertions, 0 deletions

diff --git a/sound/soc/codecs/ssm2518.c b/sound/soc/codecs/ssm2518.c
new file mode 100644
index 000000000..22cb3b7c8
--- /dev/null
+++ b/sound/soc/codecs/ssm2518.c
@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "ssm2518.h"
+
+#define SSM2518_REG_POWER1		0x00
+#define SSM2518_REG_CLOCK		0x01
+#define SSM2518_REG_SAI_CTRL1		0x02
+#define SSM2518_REG_SAI_CTRL2		0x03
+#define SSM2518_REG_CHAN_MAP		0x04
+#define SSM2518_REG_LEFT_VOL		0x05
+#define SSM2518_REG_RIGHT_VOL		0x06
+#define SSM2518_REG_MUTE_CTRL		0x07
+#define SSM2518_REG_FAULT_CTRL		0x08
+#define SSM2518_REG_POWER2		0x09
+#define SSM2518_REG_DRC_1		0x0a
+#define SSM2518_REG_DRC_2		0x0b
+#define SSM2518_REG_DRC_3		0x0c
+#define SSM2518_REG_DRC_4		0x0d
+#define SSM2518_REG_DRC_5		0x0e
+#define SSM2518_REG_DRC_6		0x0f
+#define SSM2518_REG_DRC_7		0x10
+#define SSM2518_REG_DRC_8		0x11
+#define SSM2518_REG_DRC_9		0x12
+
+#define SSM2518_POWER1_RESET			BIT(7)
+#define SSM2518_POWER1_NO_BCLK			BIT(5)
+#define SSM2518_POWER1_MCS_MASK			(0xf << 1)
+#define SSM2518_POWER1_MCS_64FS			(0x0 << 1)
+#define SSM2518_POWER1_MCS_128FS		(0x1 << 1)
+#define SSM2518_POWER1_MCS_256FS		(0x2 << 1)
+#define SSM2518_POWER1_MCS_384FS		(0x3 << 1)
+#define SSM2518_POWER1_MCS_512FS		(0x4 << 1)
+#define SSM2518_POWER1_MCS_768FS		(0x5 << 1)
+#define SSM2518_POWER1_MCS_100FS		(0x6 << 1)
+#define SSM2518_POWER1_MCS_200FS		(0x7 << 1)
+#define SSM2518_POWER1_MCS_400FS		(0x8 << 1)
+#define SSM2518_POWER1_SPWDN			BIT(0)
+
+#define SSM2518_CLOCK_ASR			BIT(0)
+
+#define SSM2518_SAI_CTRL1_FMT_MASK		(0x3 << 5)
+#define SSM2518_SAI_CTRL1_FMT_I2S		(0x0 << 5)
+#define SSM2518_SAI_CTRL1_FMT_LJ		(0x1 << 5)
+#define SSM2518_SAI_CTRL1_FMT_RJ_24BIT		(0x2 << 5)
+#define SSM2518_SAI_CTRL1_FMT_RJ_16BIT		(0x3 << 5)
+
+#define SSM2518_SAI_CTRL1_SAI_MASK		(0x7 << 2)
+#define SSM2518_SAI_CTRL1_SAI_I2S		(0x0 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_2		(0x1 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_4		(0x2 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_8		(0x3 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_16		(0x4 << 2)
+#define SSM2518_SAI_CTRL1_SAI_MONO		(0x5 << 2)
+
+#define SSM2518_SAI_CTRL1_FS_MASK		(0x3)
+#define SSM2518_SAI_CTRL1_FS_8000_12000		(0x0)
+#define SSM2518_SAI_CTRL1_FS_16000_24000	(0x1)
+#define SSM2518_SAI_CTRL1_FS_32000_48000	(0x2)
+#define SSM2518_SAI_CTRL1_FS_64000_96000	(0x3)
+
+#define SSM2518_SAI_CTRL2_BCLK_INTERAL		BIT(7)
+#define SSM2518_SAI_CTRL2_LRCLK_PULSE		BIT(6)
+#define SSM2518_SAI_CTRL2_LRCLK_INVERT		BIT(5)
+#define SSM2518_SAI_CTRL2_MSB			BIT(4)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK	(0x3 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_32		(0x0 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_24		(0x1 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_16		(0x2 << 2)
+#define SSM2518_SAI_CTRL2_BCLK_INVERT		BIT(1)
+
+#define SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET	4
+#define SSM2518_CHAN_MAP_RIGHT_SLOT_MASK	0xf0
+#define SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET	0
+#define SSM2518_CHAN_MAP_LEFT_SLOT_MASK		0x0f
+
+#define SSM2518_MUTE_CTRL_ANA_GAIN		BIT(5)
+#define SSM2518_MUTE_CTRL_MUTE_MASTER		BIT(0)
+
+#define SSM2518_POWER2_APWDN			BIT(0)
+
+#define SSM2518_DAC_MUTE			BIT(6)
+#define SSM2518_DAC_FS_MASK			0x07
+#define SSM2518_DAC_FS_8000			0x00
+#define SSM2518_DAC_FS_16000			0x01
+#define SSM2518_DAC_FS_32000			0x02
+#define SSM2518_DAC_FS_64000			0x03
+#define SSM2518_DAC_FS_128000			0x04
+
+struct ssm2518 {
+	struct regmap *regmap;
+	bool right_j;
+
+	unsigned int sysclk;
+	const struct snd_pcm_hw_constraint_list *constraints;
+
+	struct gpio_desc *enable_gpio;
+};
+
+static const struct reg_default ssm2518_reg_defaults[] = {
+	{ 0x00, 0x05 },
+	{ 0x01, 0x00 },
+	{ 0x02, 0x02 },
+	{ 0x03, 0x00 },
+	{ 0x04, 0x10 },
+	{ 0x05, 0x40 },
+	{ 0x06, 0x40 },
+	{ 0x07, 0x81 },
+	{ 0x08, 0x0c },
+	{ 0x09, 0x99 },
+	{ 0x0a, 0x7c },
+	{ 0x0b, 0x5b },
+	{ 0x0c, 0x57 },
+	{ 0x0d, 0x89 },
+	{ 0x0e, 0x8c },
+	{ 0x0f, 0x77 },
+	{ 0x10, 0x26 },
+	{ 0x11, 0x1c },
+	{ 0x12, 0x97 },
+};
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(ssm2518_vol_tlv, -7125, 2400);
+static const DECLARE_TLV_DB_SCALE(ssm2518_compressor_tlv, -3400, 200, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_expander_tlv, -8100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_noise_gate_tlv, -9600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_post_drc_tlv, -2400, 300, 0);
+
+static const DECLARE_TLV_DB_RANGE(ssm2518_limiter_tlv,
+	0, 7, TLV_DB_SCALE_ITEM(-2200, 200, 0),
+	7, 15, TLV_DB_SCALE_ITEM(-800, 100, 0),
+);
+
+static const char * const ssm2518_drc_peak_detector_attack_time_text[] = {
+	"0 ms", "0.1 ms", "0.19 ms", "0.37 ms", "0.75 ms", "1.5 ms", "3 ms",
+	"6 ms", "12 ms", "24 ms", "48 ms", "96 ms", "192 ms", "384 ms",
+	"768 ms", "1536 ms",
+};
+
+static const char * const ssm2518_drc_peak_detector_release_time_text[] = {
+	"0 ms", "1.5 ms", "3 ms", "6 ms", "12 ms", "24 ms", "48 ms", "96 ms",
+	"192 ms", "384 ms", "768 ms", "1536 ms", "3072 ms", "6144 ms",
+	"12288 ms", "24576 ms"
+};
+
+static const char * const ssm2518_drc_hold_time_text[] = {
+	"0 ms", "0.67 ms", "1.33 ms", "2.67 ms", "5.33 ms", "10.66 ms",
+	"21.32 ms", "42.64 ms", "85.28 ms", "170.56 ms", "341.12 ms",
+	"682.24 ms", "1364 ms",
+};
+
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_attack_time_enum,
+	SSM2518_REG_DRC_2, 4, ssm2518_drc_peak_detector_attack_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_release_time_enum,
+	SSM2518_REG_DRC_2, 0, ssm2518_drc_peak_detector_release_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_attack_time_enum,
+	SSM2518_REG_DRC_6, 4, ssm2518_drc_peak_detector_attack_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_decay_time_enum,
+	SSM2518_REG_DRC_6, 0, ssm2518_drc_peak_detector_release_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_hold_time_enum,
+	SSM2518_REG_DRC_7, 4, ssm2518_drc_hold_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_noise_gate_hold_time_enum,
+	SSM2518_REG_DRC_7, 0, ssm2518_drc_hold_time_text);
+static SOC_ENUM_SINGLE_DECL(ssm2518_drc_rms_averaging_time_enum,
+	SSM2518_REG_DRC_9, 0, ssm2518_drc_peak_detector_release_time_text);
+
+static const struct snd_kcontrol_new ssm2518_snd_controls[] = {
+	SOC_SINGLE("Playback De-emphasis Switch", SSM2518_REG_MUTE_CTRL,
+			4, 1, 0),
+	SOC_DOUBLE_R_TLV("Master Playback Volume", SSM2518_REG_LEFT_VOL,
+			SSM2518_REG_RIGHT_VOL, 0, 0xff, 1, ssm2518_vol_tlv),
+	SOC_DOUBLE("Master Playback Switch", SSM2518_REG_MUTE_CTRL, 2, 1, 1, 1),
+
+	SOC_SINGLE("Amp Low Power Mode Switch", SSM2518_REG_POWER2, 4, 1, 0),
+	SOC_SINGLE("DAC Low Power Mode Switch", SSM2518_REG_POWER2, 3, 1, 0),
+
+	SOC_SINGLE("DRC Limiter Switch", SSM2518_REG_DRC_1, 5, 1, 0),
+	SOC_SINGLE("DRC Compressor Switch", SSM2518_REG_DRC_1, 4, 1, 0),
+	SOC_SINGLE("DRC Expander Switch", SSM2518_REG_DRC_1, 3, 1, 0),
+	SOC_SINGLE("DRC Noise Gate Switch", SSM2518_REG_DRC_1, 2, 1, 0),
+	SOC_DOUBLE("DRC Switch", SSM2518_REG_DRC_1, 0, 1, 1, 0),
+
+	SOC_SINGLE_TLV("DRC Limiter Threshold Volume",
+			SSM2518_REG_DRC_3, 4, 15, 1, ssm2518_limiter_tlv),
+	SOC_SINGLE_TLV("DRC Compressor Lower Threshold Volume",
+			SSM2518_REG_DRC_3, 0, 15, 1, ssm2518_compressor_tlv),
+	SOC_SINGLE_TLV("DRC Expander Upper Threshold Volume", SSM2518_REG_DRC_4,
+			4, 15, 1, ssm2518_expander_tlv),
+	SOC_SINGLE_TLV("DRC Noise Gate Threshold Volume",
+			SSM2518_REG_DRC_4, 0, 15, 1, ssm2518_noise_gate_tlv),
+	SOC_SINGLE_TLV("DRC Upper Output Threshold Volume",
+			SSM2518_REG_DRC_5, 4, 15, 1, ssm2518_limiter_tlv),
+	SOC_SINGLE_TLV("DRC Lower Output Threshold Volume",
+			SSM2518_REG_DRC_5, 0, 15, 1, ssm2518_noise_gate_tlv),
+	SOC_SINGLE_TLV("DRC Post Volume", SSM2518_REG_DRC_8,
+			2, 15, 1, ssm2518_post_drc_tlv),
+
+	SOC_ENUM("DRC Peak Detector Attack Time",
+		ssm2518_drc_peak_detector_attack_time_enum),
+	SOC_ENUM("DRC Peak Detector Release Time",
+		ssm2518_drc_peak_detector_release_time_enum),
+	SOC_ENUM("DRC Attack Time", ssm2518_drc_attack_time_enum),
+	SOC_ENUM("DRC Decay Time", ssm2518_drc_decay_time_enum),
+	SOC_ENUM("DRC Hold Time", ssm2518_drc_hold_time_enum),
+	SOC_ENUM("DRC Noise Gate Hold Time",
+		ssm2518_drc_noise_gate_hold_time_enum),
+	SOC_ENUM("DRC RMS Averaging Time", ssm2518_drc_rms_averaging_time_enum),
+};
+
+static const struct snd_soc_dapm_widget ssm2518_dapm_widgets[] = {
+	SND_SOC_DAPM_DAC("DACL", "HiFi Playback", SSM2518_REG_POWER2, 1, 1),
+	SND_SOC_DAPM_DAC("DACR", "HiFi Playback", SSM2518_REG_POWER2, 2, 1),
+
+	SND_SOC_DAPM_OUTPUT("OUTL"),
+	SND_SOC_DAPM_OUTPUT("OUTR"),
+};
+
+static const struct snd_soc_dapm_route ssm2518_routes[] = {
+	{ "OUTL", NULL, "DACL" },
+	{ "OUTR", NULL, "DACR" },
+};
+
+struct ssm2518_mcs_lut {
+	unsigned int rate;
+	const unsigned int *sysclks;
+};
+
+static const unsigned int ssm2518_sysclks_2048000[] = {
+	2048000, 4096000, 8192000, 12288000, 16384000, 24576000,
+	3200000, 6400000, 12800000, 0
+};
+
+static const unsigned int ssm2518_sysclks_2822000[] = {
+	2822000, 5644800, 11289600, 16934400, 22579200, 33868800,
+	4410000, 8820000, 17640000, 0
+};
+
+static const unsigned int ssm2518_sysclks_3072000[] = {
+	3072000, 6144000, 12288000, 16384000, 24576000, 38864000,
+	4800000, 9600000, 19200000, 0
+};
+
+static const struct ssm2518_mcs_lut ssm2518_mcs_lut[] = {
+	{ 8000,  ssm2518_sysclks_2048000, },
+	{ 11025, ssm2518_sysclks_2822000, },
+	{ 12000, ssm2518_sysclks_3072000, },
+	{ 16000, ssm2518_sysclks_2048000, },
+	{ 24000, ssm2518_sysclks_3072000, },
+	{ 22050, ssm2518_sysclks_2822000, },
+	{ 32000, ssm2518_sysclks_2048000, },
+	{ 44100, ssm2518_sysclks_2822000, },
+	{ 48000, ssm2518_sysclks_3072000, },
+	{ 96000, ssm2518_sysclks_3072000, },
+};
+
+static const unsigned int ssm2518_rates_2048000[] = {
+	8000, 16000, 32000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2048000 = {
+	.list = ssm2518_rates_2048000,
+	.count = ARRAY_SIZE(ssm2518_rates_2048000),
+};
+
+static const unsigned int ssm2518_rates_2822000[] = {
+	11025, 22050, 44100,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2822000 = {
+	.list = ssm2518_rates_2822000,
+	.count = ARRAY_SIZE(ssm2518_rates_2822000),
+};
+
+static const unsigned int ssm2518_rates_3072000[] = {
+	12000, 24000, 48000, 96000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_3072000 = {
+	.list = ssm2518_rates_3072000,
+	.count = ARRAY_SIZE(ssm2518_rates_3072000),
+};
+
+static const unsigned int ssm2518_rates_12288000[] = {
+	8000, 12000, 16000, 24000, 32000, 48000, 96000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_12288000 = {
+	.list = ssm2518_rates_12288000,
+	.count = ARRAY_SIZE(ssm2518_rates_12288000),
+};
+
+static int ssm2518_lookup_mcs(struct ssm2518 *ssm2518,
+	unsigned int rate)
+{
+	const unsigned int *sysclks = NULL;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ssm2518_mcs_lut); i++) {
+		if (ssm2518_mcs_lut[i].rate == rate) {
+			sysclks = ssm2518_mcs_lut[i].sysclks;
+			break;
+		}
+	}
+
+	if (!sysclks)
+		return -EINVAL;
+
+	for (i = 0; sysclks[i]; i++) {
+		if (sysclks[i] == ssm2518->sysclk)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int ssm2518_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(component);
+	unsigned int rate = params_rate(params);
+	unsigned int ctrl1, ctrl1_mask;
+	int mcs;
+	int ret;
+
+	mcs = ssm2518_lookup_mcs(ssm2518, rate);
+	if (mcs < 0)
+		return mcs;
+
+	ctrl1_mask = SSM2518_SAI_CTRL1_FS_MASK;
+
+	if (rate >= 8000 && rate <= 12000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_8000_12000;
+	else if (rate >= 16000 && rate <= 24000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_16000_24000;
+	else if (rate >= 32000 && rate <= 48000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_32000_48000;
+	else if (rate >= 64000 && rate <= 96000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_64000_96000;
+	else
+		return -EINVAL;
+
+	if (ssm2518->right_j) {
+		switch (params_width(params)) {
+		case 16:
+			ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_16BIT;
+			break;
+		case 24:
+			ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT;
+			break;
+		default:
+			return -EINVAL;
+		}
+		ctrl1_mask |= SSM2518_SAI_CTRL1_FMT_MASK;
+	}
+
+	/* Disable auto samplerate detection */
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_CLOCK,
+				SSM2518_CLOCK_ASR, SSM2518_CLOCK_ASR);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1,
+				ctrl1_mask, ctrl1);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+				SSM2518_POWER1_MCS_MASK, mcs << 1);
+}
+
+static int ssm2518_mute(struct snd_soc_dai *dai, int mute, int direction)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(dai->component);
+	unsigned int val;
+
+	if (mute)
+		val = SSM2518_MUTE_CTRL_MUTE_MASTER;
+	else
+		val = 0;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_MUTE_CTRL,
+			SSM2518_MUTE_CTRL_MUTE_MASTER, val);
+}
+
+static int ssm2518_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(dai->component);
+	unsigned int ctrl1 = 0, ctrl2 = 0;
+	bool invert_fclk;
+	int ret;
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_CBC_CFC:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT;
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		invert_fclk = true;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT;
+		invert_fclk = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssm2518->right_j = false;
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ;
+		invert_fclk = !invert_fclk;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT;
+		ssm2518->right_j = true;
+		invert_fclk = !invert_fclk;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE;
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S;
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE;
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ;
+		invert_fclk = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (invert_fclk)
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_INVERT;
+
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, ctrl1);
+	if (ret)
+		return ret;
+
+	return regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, ctrl2);
+}
+
+static int ssm2518_set_power(struct ssm2518 *ssm2518, bool enable)
+{
+	int ret = 0;
+
+	if (!enable) {
+		ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_SPWDN, SSM2518_POWER1_SPWDN);
+		regcache_mark_dirty(ssm2518->regmap);
+	}
+
+	if (ssm2518->enable_gpio)
+		gpiod_set_value_cansleep(ssm2518->enable_gpio, enable);
+
+	regcache_cache_only(ssm2518->regmap, !enable);
+
+	if (enable) {
+		ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_SPWDN | SSM2518_POWER1_RESET, 0x00);
+		regcache_sync(ssm2518->regmap);
+	}
+
+	return ret;
+}
+
+static int ssm2518_set_bias_level(struct snd_soc_component *component,
+	enum snd_soc_bias_level level)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF)
+			ret = ssm2518_set_power(ssm2518, true);
+		break;
+	case SND_SOC_BIAS_OFF:
+		ret = ssm2518_set_power(ssm2518, false);
+		break;
+	}
+
+	return ret;
+}
+
+static int ssm2518_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+	unsigned int rx_mask, int slots, int width)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(dai->component);
+	unsigned int ctrl1, ctrl2;
+	int left_slot, right_slot;
+	int ret;
+
+	if (slots == 0)
+		return regmap_update_bits(ssm2518->regmap,
+			SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK,
+			SSM2518_SAI_CTRL1_SAI_I2S);
+
+	if (tx_mask == 0 || rx_mask != 0)
+		return -EINVAL;
+
+	if (slots == 1) {
+		if (tx_mask != 1)
+			return -EINVAL;
+		left_slot = 0;
+		right_slot = 0;
+	} else {
+		/* We assume the left channel < right channel */
+		left_slot = __ffs(tx_mask);
+		tx_mask &= ~(1 << left_slot);
+		if (tx_mask == 0) {
+			right_slot = left_slot;
+		} else {
+			right_slot = __ffs(tx_mask);
+			tx_mask &= ~(1 << right_slot);
+		}
+	}
+
+	if (tx_mask != 0 || left_slot >= slots || right_slot >= slots)
+		return -EINVAL;
+
+	switch (width) {
+	case 16:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_16;
+		break;
+	case 24:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_24;
+		break;
+	case 32:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (slots) {
+	case 1:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_MONO;
+		break;
+	case 2:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_2;
+		break;
+	case 4:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_4;
+		break;
+	case 8:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_8;
+		break;
+	case 16:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_16;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_CHAN_MAP,
+		(left_slot << SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET) |
+		(right_slot << SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1,
+		SSM2518_SAI_CTRL1_SAI_MASK, ctrl1);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL2,
+		SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK, ctrl2);
+}
+
+static int ssm2518_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(dai->component);
+
+	if (ssm2518->constraints)
+		snd_pcm_hw_constraint_list(substream->runtime, 0,
+				SNDRV_PCM_HW_PARAM_RATE, ssm2518->constraints);
+
+	return 0;
+}
+
+#define SSM2518_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32)
+
+static const struct snd_soc_dai_ops ssm2518_dai_ops = {
+	.startup = ssm2518_startup,
+	.hw_params	= ssm2518_hw_params,
+	.mute_stream	= ssm2518_mute,
+	.set_fmt	= ssm2518_set_dai_fmt,
+	.set_tdm_slot	= ssm2518_set_tdm_slot,
+	.no_capture_mute = 1,
+};
+
+static struct snd_soc_dai_driver ssm2518_dai = {
+	.name = "ssm2518-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.formats = SSM2518_FORMATS,
+	},
+	.ops = &ssm2518_dai_ops,
+};
+
+static int ssm2518_set_sysclk(struct snd_soc_component *component, int clk_id,
+	int source, unsigned int freq, int dir)
+{
+	struct ssm2518 *ssm2518 = snd_soc_component_get_drvdata(component);
+	unsigned int val;
+
+	if (clk_id != SSM2518_SYSCLK)
+		return -EINVAL;
+
+	switch (source) {
+	case SSM2518_SYSCLK_SRC_MCLK:
+		val = 0;
+		break;
+	case SSM2518_SYSCLK_SRC_BCLK:
+		/* In this case the bitclock is used as the system clock, and
+		 * the bitclock signal needs to be connected to the MCLK pin and
+		 * the BCLK pin is left unconnected */
+		val = SSM2518_POWER1_NO_BCLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (freq) {
+	case 0:
+		ssm2518->constraints = NULL;
+		break;
+	case 2048000:
+	case 4096000:
+	case 8192000:
+	case 3200000:
+	case 6400000:
+	case 12800000:
+		ssm2518->constraints = &ssm2518_constraints_2048000;
+		break;
+	case 2822000:
+	case 5644800:
+	case 11289600:
+	case 16934400:
+	case 22579200:
+	case 33868800:
+	case 4410000:
+	case 8820000:
+	case 17640000:
+		ssm2518->constraints = &ssm2518_constraints_2822000;
+		break;
+	case 3072000:
+	case 6144000:
+	case 38864000:
+	case 4800000:
+	case 9600000:
+	case 19200000:
+		ssm2518->constraints = &ssm2518_constraints_3072000;
+		break;
+	case 12288000:
+	case 16384000:
+	case 24576000:
+		ssm2518->constraints = &ssm2518_constraints_12288000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssm2518->sysclk = freq;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_NO_BCLK, val);
+}
+
+static const struct snd_soc_component_driver ssm2518_component_driver = {
+	.set_bias_level		= ssm2518_set_bias_level,
+	.set_sysclk		= ssm2518_set_sysclk,
+	.controls		= ssm2518_snd_controls,
+	.num_controls		= ARRAY_SIZE(ssm2518_snd_controls),
+	.dapm_widgets		= ssm2518_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(ssm2518_dapm_widgets),
+	.dapm_routes		= ssm2518_routes,
+	.num_dapm_routes	= ARRAY_SIZE(ssm2518_routes),
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static const struct regmap_config ssm2518_regmap_config = {
+	.val_bits = 8,
+	.reg_bits = 8,
+
+	.max_register = SSM2518_REG_DRC_9,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = ssm2518_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(ssm2518_reg_defaults),
+};
+
+static int ssm2518_i2c_probe(struct i2c_client *i2c)
+{
+	struct ssm2518 *ssm2518;
+	int ret;
+
+	ssm2518 = devm_kzalloc(&i2c->dev, sizeof(*ssm2518), GFP_KERNEL);
+	if (ssm2518 == NULL)
+		return -ENOMEM;
+
+	/* Start with enabling the chip */
+	ssm2518->enable_gpio = devm_gpiod_get_optional(&i2c->dev, NULL,
+						       GPIOD_OUT_HIGH);
+	ret = PTR_ERR_OR_ZERO(ssm2518->enable_gpio);
+	if (ret)
+		return ret;
+
+	gpiod_set_consumer_name(ssm2518->enable_gpio, "SSM2518 nSD");
+
+	i2c_set_clientdata(i2c, ssm2518);
+
+	ssm2518->regmap = devm_regmap_init_i2c(i2c, &ssm2518_regmap_config);
+	if (IS_ERR(ssm2518->regmap))
+		return PTR_ERR(ssm2518->regmap);
+
+	/*
+	 * The reset bit is obviously volatile, but we need to be able to cache
+	 * the other bits in the register, so we can't just mark the whole
+	 * register as volatile. Since this is the only place where we'll ever
+	 * touch the reset bit just bypass the cache for this operation.
+	 */
+	regcache_cache_bypass(ssm2518->regmap, true);
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_RESET);
+	regcache_cache_bypass(ssm2518->regmap, false);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER2,
+				SSM2518_POWER2_APWDN, 0x00);
+	if (ret)
+		return ret;
+
+	ret = ssm2518_set_power(ssm2518, false);
+	if (ret)
+		return ret;
+
+	return devm_snd_soc_register_component(&i2c->dev,
+			&ssm2518_component_driver,
+			&ssm2518_dai, 1);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ssm2518_dt_ids[] = {
+	{ .compatible = "adi,ssm2518", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ssm2518_dt_ids);
+#endif
+
+static const struct i2c_device_id ssm2518_i2c_ids[] = {
+	{ "ssm2518", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ssm2518_i2c_ids);
+
+static struct i2c_driver ssm2518_driver = {
+	.driver = {
+		.name = "ssm2518",
+		.of_match_table = of_match_ptr(ssm2518_dt_ids),
+	},
+	.probe_new = ssm2518_i2c_probe,
+	.id_table = ssm2518_i2c_ids,
+};
+module_i2c_driver(ssm2518_driver);
+
+MODULE_DESCRIPTION("ASoC SSM2518 driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");