Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1218 insertions, 0 deletions

diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
new file mode 100644
index 000000000..91a22d927
--- /dev/null
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -0,0 +1,1218 @@
+// SPDX-License-Identifier: GPL-2.0
+// TLV320ADCX140 Sound driver
+// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "tlv320adcx140.h"
+
+struct adcx140_priv {
+	struct snd_soc_component *component;
+	struct regulator *supply_areg;
+	struct gpio_desc *gpio_reset;
+	struct regmap *regmap;
+	struct device *dev;
+
+	bool micbias_vg;
+	bool phase_calib_on;
+
+	unsigned int dai_fmt;
+	unsigned int slot_width;
+};
+
+static const char * const gpo_config_names[] = {
+	"ti,gpo-config-1",
+	"ti,gpo-config-2",
+	"ti,gpo-config-3",
+	"ti,gpo-config-4",
+};
+
+static const struct reg_default adcx140_reg_defaults[] = {
+	{ ADCX140_PAGE_SELECT, 0x00 },
+	{ ADCX140_SW_RESET, 0x00 },
+	{ ADCX140_SLEEP_CFG, 0x00 },
+	{ ADCX140_SHDN_CFG, 0x05 },
+	{ ADCX140_ASI_CFG0, 0x30 },
+	{ ADCX140_ASI_CFG1, 0x00 },
+	{ ADCX140_ASI_CFG2, 0x00 },
+	{ ADCX140_ASI_CH1, 0x00 },
+	{ ADCX140_ASI_CH2, 0x01 },
+	{ ADCX140_ASI_CH3, 0x02 },
+	{ ADCX140_ASI_CH4, 0x03 },
+	{ ADCX140_ASI_CH5, 0x04 },
+	{ ADCX140_ASI_CH6, 0x05 },
+	{ ADCX140_ASI_CH7, 0x06 },
+	{ ADCX140_ASI_CH8, 0x07 },
+	{ ADCX140_MST_CFG0, 0x02 },
+	{ ADCX140_MST_CFG1, 0x48 },
+	{ ADCX140_ASI_STS, 0xff },
+	{ ADCX140_CLK_SRC, 0x10 },
+	{ ADCX140_PDMCLK_CFG, 0x40 },
+	{ ADCX140_PDM_CFG, 0x00 },
+	{ ADCX140_GPIO_CFG0, 0x22 },
+	{ ADCX140_GPO_CFG0, 0x00 },
+	{ ADCX140_GPO_CFG1, 0x00 },
+	{ ADCX140_GPO_CFG2, 0x00 },
+	{ ADCX140_GPO_CFG3, 0x00 },
+	{ ADCX140_GPO_VAL, 0x00 },
+	{ ADCX140_GPIO_MON, 0x00 },
+	{ ADCX140_GPI_CFG0, 0x00 },
+	{ ADCX140_GPI_CFG1, 0x00 },
+	{ ADCX140_GPI_MON, 0x00 },
+	{ ADCX140_INT_CFG, 0x00 },
+	{ ADCX140_INT_MASK0, 0xff },
+	{ ADCX140_INT_LTCH0, 0x00 },
+	{ ADCX140_BIAS_CFG, 0x00 },
+	{ ADCX140_CH1_CFG0, 0x00 },
+	{ ADCX140_CH1_CFG1, 0x00 },
+	{ ADCX140_CH1_CFG2, 0xc9 },
+	{ ADCX140_CH1_CFG3, 0x80 },
+	{ ADCX140_CH1_CFG4, 0x00 },
+	{ ADCX140_CH2_CFG0, 0x00 },
+	{ ADCX140_CH2_CFG1, 0x00 },
+	{ ADCX140_CH2_CFG2, 0xc9 },
+	{ ADCX140_CH2_CFG3, 0x80 },
+	{ ADCX140_CH2_CFG4, 0x00 },
+	{ ADCX140_CH3_CFG0, 0x00 },
+	{ ADCX140_CH3_CFG1, 0x00 },
+	{ ADCX140_CH3_CFG2, 0xc9 },
+	{ ADCX140_CH3_CFG3, 0x80 },
+	{ ADCX140_CH3_CFG4, 0x00 },
+	{ ADCX140_CH4_CFG0, 0x00 },
+	{ ADCX140_CH4_CFG1, 0x00 },
+	{ ADCX140_CH4_CFG2, 0xc9 },
+	{ ADCX140_CH4_CFG3, 0x80 },
+	{ ADCX140_CH4_CFG4, 0x00 },
+	{ ADCX140_CH5_CFG2, 0xc9 },
+	{ ADCX140_CH5_CFG3, 0x80 },
+	{ ADCX140_CH5_CFG4, 0x00 },
+	{ ADCX140_CH6_CFG2, 0xc9 },
+	{ ADCX140_CH6_CFG3, 0x80 },
+	{ ADCX140_CH6_CFG4, 0x00 },
+	{ ADCX140_CH7_CFG2, 0xc9 },
+	{ ADCX140_CH7_CFG3, 0x80 },
+	{ ADCX140_CH7_CFG4, 0x00 },
+	{ ADCX140_CH8_CFG2, 0xc9 },
+	{ ADCX140_CH8_CFG3, 0x80 },
+	{ ADCX140_CH8_CFG4, 0x00 },
+	{ ADCX140_DSP_CFG0, 0x01 },
+	{ ADCX140_DSP_CFG1, 0x40 },
+	{ ADCX140_DRE_CFG0, 0x7b },
+	{ ADCX140_AGC_CFG0, 0xe7 },
+	{ ADCX140_IN_CH_EN, 0xf0 },
+	{ ADCX140_ASI_OUT_CH_EN, 0x00 },
+	{ ADCX140_PWR_CFG, 0x00 },
+	{ ADCX140_DEV_STS0, 0x00 },
+	{ ADCX140_DEV_STS1, 0x80 },
+};
+
+static const struct regmap_range_cfg adcx140_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 12 * 128,
+		.selector_reg = ADCX140_PAGE_SELECT,
+		.selector_mask = 0xff,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 128,
+	},
+};
+
+static bool adcx140_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADCX140_SW_RESET:
+	case ADCX140_DEV_STS0:
+	case ADCX140_DEV_STS1:
+	case ADCX140_ASI_STS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config adcx140_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_defaults = adcx140_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(adcx140_reg_defaults),
+	.cache_type = REGCACHE_FLAT,
+	.ranges = adcx140_ranges,
+	.num_ranges = ARRAY_SIZE(adcx140_ranges),
+	.max_register = 12 * 128,
+	.volatile_reg = adcx140_volatile,
+};
+
+/* Digital Volume control. From -100 to 27 dB in 0.5 dB steps */
+static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10050, 50, 0);
+
+/* ADC gain. From 0 to 42 dB in 1 dB steps */
+static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 100, 0);
+
+/* DRE Level. From -12 dB to -66 dB in 1 dB steps */
+static DECLARE_TLV_DB_SCALE(dre_thresh_tlv, -6600, 100, 0);
+/* DRE Max Gain. From 2 dB to 26 dB in 2 dB steps */
+static DECLARE_TLV_DB_SCALE(dre_gain_tlv, 200, 200, 0);
+
+/* AGC Level. From -6 dB to -36 dB in 2 dB steps */
+static DECLARE_TLV_DB_SCALE(agc_thresh_tlv, -3600, 200, 0);
+/* AGC Max Gain. From 3 dB to 42 dB in 3 dB steps */
+static DECLARE_TLV_DB_SCALE(agc_gain_tlv, 300, 300, 0);
+
+static const char * const decimation_filter_text[] = {
+	"Linear Phase", "Low Latency", "Ultra-low Latency"
+};
+
+static SOC_ENUM_SINGLE_DECL(decimation_filter_enum, ADCX140_DSP_CFG0, 4,
+			    decimation_filter_text);
+
+static const struct snd_kcontrol_new decimation_filter_controls[] = {
+	SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum),
+};
+
+static const char * const pdmclk_text[] = {
+	"2.8224 MHz", "1.4112 MHz", "705.6 kHz", "5.6448 MHz"
+};
+
+static SOC_ENUM_SINGLE_DECL(pdmclk_select_enum, ADCX140_PDMCLK_CFG, 0,
+			    pdmclk_text);
+
+static const struct snd_kcontrol_new pdmclk_div_controls[] = {
+	SOC_DAPM_ENUM("PDM Clk Divider Select", pdmclk_select_enum),
+};
+
+static const char * const resistor_text[] = {
+	"2.5 kOhm", "10 kOhm", "20 kOhm"
+};
+
+static SOC_ENUM_SINGLE_DECL(in1_resistor_enum, ADCX140_CH1_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in2_resistor_enum, ADCX140_CH2_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in3_resistor_enum, ADCX140_CH3_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in4_resistor_enum, ADCX140_CH4_CFG0, 2,
+			    resistor_text);
+
+static const struct snd_kcontrol_new in1_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum),
+};
+static const struct snd_kcontrol_new in2_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum),
+};
+static const struct snd_kcontrol_new in3_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum),
+};
+static const struct snd_kcontrol_new in4_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum),
+};
+
+/* Analog/Digital Selection */
+static const char * const adcx140_mic_sel_text[] = {"Analog", "Line In", "Digital"};
+static const char * const adcx140_analog_sel_text[] = {"Analog", "Line In"};
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1p_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1p_control =
+SOC_DAPM_ENUM("MIC1P MUX", adcx140_mic1p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1_analog_enum,
+			    ADCX140_CH1_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1_analog_control =
+SOC_DAPM_ENUM("MIC1 Analog MUX", adcx140_mic1_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1m_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1m_control =
+SOC_DAPM_ENUM("MIC1M MUX", adcx140_mic1m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2p_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2p_control =
+SOC_DAPM_ENUM("MIC2P MUX", adcx140_mic2p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2_analog_enum,
+			    ADCX140_CH2_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2_analog_control =
+SOC_DAPM_ENUM("MIC2 Analog MUX", adcx140_mic2_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2m_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2m_control =
+SOC_DAPM_ENUM("MIC2M MUX", adcx140_mic2m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3p_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3p_control =
+SOC_DAPM_ENUM("MIC3P MUX", adcx140_mic3p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3_analog_enum,
+			    ADCX140_CH3_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3_analog_control =
+SOC_DAPM_ENUM("MIC3 Analog MUX", adcx140_mic3_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3m_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3m_control =
+SOC_DAPM_ENUM("MIC3M MUX", adcx140_mic3m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4p_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4p_control =
+SOC_DAPM_ENUM("MIC4P MUX", adcx140_mic4p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4_analog_enum,
+			    ADCX140_CH4_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4_analog_control =
+SOC_DAPM_ENUM("MIC4 Analog MUX", adcx140_mic4_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4m_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4m_control =
+SOC_DAPM_ENUM("MIC4M MUX", adcx140_mic4m_enum);
+
+static const struct snd_kcontrol_new adcx140_dapm_ch1_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 7, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch2_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 6, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch3_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 5, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch4_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 4, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch5_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 3, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch6_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 2, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch7_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 1, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch8_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 0, 1, 0);
+
+static const struct snd_kcontrol_new adcx140_dapm_ch1_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH1_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch2_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH2_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch3_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH3_CFG0, 0, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch4_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_CH4_CFG0, 0, 1, 0);
+
+static const struct snd_kcontrol_new adcx140_dapm_dre_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_DSP_CFG1, 3, 1, 0);
+
+/* Output Mixer */
+static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Digital CH1 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH2 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH3 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH4 Switch", 0, 0, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = {
+	/* Analog Differential Inputs */
+	SND_SOC_DAPM_INPUT("MIC1P"),
+	SND_SOC_DAPM_INPUT("MIC1M"),
+	SND_SOC_DAPM_INPUT("MIC2P"),
+	SND_SOC_DAPM_INPUT("MIC2M"),
+	SND_SOC_DAPM_INPUT("MIC3P"),
+	SND_SOC_DAPM_INPUT("MIC3M"),
+	SND_SOC_DAPM_INPUT("MIC4P"),
+	SND_SOC_DAPM_INPUT("MIC4M"),
+
+	SND_SOC_DAPM_OUTPUT("CH1_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH2_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH3_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH4_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH5_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH6_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH7_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH8_OUT"),
+
+	SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
+		&adcx140_output_mixer_controls[0],
+		ARRAY_SIZE(adcx140_output_mixer_controls)),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1p_control),
+	SND_SOC_DAPM_MUX("MIC2P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2p_control),
+	SND_SOC_DAPM_MUX("MIC3P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3p_control),
+	SND_SOC_DAPM_MUX("MIC4P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4p_control),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1_analog_control),
+	SND_SOC_DAPM_MUX("MIC2 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2_analog_control),
+	SND_SOC_DAPM_MUX("MIC3 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3_analog_control),
+	SND_SOC_DAPM_MUX("MIC4 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4_analog_control),
+
+	SND_SOC_DAPM_MUX("MIC1M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1m_control),
+	SND_SOC_DAPM_MUX("MIC2M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2m_control),
+	SND_SOC_DAPM_MUX("MIC3M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3m_control),
+	SND_SOC_DAPM_MUX("MIC4M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4m_control),
+
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH1", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH2", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH3", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH4", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_ADC("CH1_ADC", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
+	SND_SOC_DAPM_ADC("CH2_ADC", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
+	SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
+	SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+
+	SND_SOC_DAPM_ADC("CH1_DIG", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
+	SND_SOC_DAPM_ADC("CH2_DIG", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
+	SND_SOC_DAPM_ADC("CH3_DIG", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
+	SND_SOC_DAPM_ADC("CH4_DIG", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+	SND_SOC_DAPM_ADC("CH5_DIG", "CH5 Capture", ADCX140_IN_CH_EN, 3, 0),
+	SND_SOC_DAPM_ADC("CH6_DIG", "CH6 Capture", ADCX140_IN_CH_EN, 2, 0),
+	SND_SOC_DAPM_ADC("CH7_DIG", "CH7 Capture", ADCX140_IN_CH_EN, 1, 0),
+	SND_SOC_DAPM_ADC("CH8_DIG", "CH8 Capture", ADCX140_IN_CH_EN, 0, 0),
+
+
+	SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch1_en_switch),
+	SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch2_en_switch),
+	SND_SOC_DAPM_SWITCH("CH3_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch3_en_switch),
+	SND_SOC_DAPM_SWITCH("CH4_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch4_en_switch),
+
+	SND_SOC_DAPM_SWITCH("CH5_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch5_en_switch),
+	SND_SOC_DAPM_SWITCH("CH6_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch6_en_switch),
+	SND_SOC_DAPM_SWITCH("CH7_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch7_en_switch),
+	SND_SOC_DAPM_SWITCH("CH8_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch8_en_switch),
+
+	SND_SOC_DAPM_SWITCH("DRE_ENABLE", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_dre_en_switch),
+
+	SND_SOC_DAPM_SWITCH("CH1_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch1_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH2_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch2_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH3_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch3_dre_en_switch),
+	SND_SOC_DAPM_SWITCH("CH4_DRE_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch4_dre_en_switch),
+
+	SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in1_resistor_controls),
+	SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in2_resistor_controls),
+	SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in3_resistor_controls),
+	SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in4_resistor_controls),
+
+	SND_SOC_DAPM_MUX("PDM Clk Div Select", SND_SOC_NOPM, 0, 0,
+			pdmclk_div_controls),
+
+	SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0,
+			decimation_filter_controls),
+};
+
+static const struct snd_soc_dapm_route adcx140_audio_map[] = {
+	/* Outputs */
+	{"CH1_OUT", NULL, "Output Mixer"},
+	{"CH2_OUT", NULL, "Output Mixer"},
+	{"CH3_OUT", NULL, "Output Mixer"},
+	{"CH4_OUT", NULL, "Output Mixer"},
+
+	{"CH1_ASI_EN", "Switch", "CH1_ADC"},
+	{"CH2_ASI_EN", "Switch", "CH2_ADC"},
+	{"CH3_ASI_EN", "Switch", "CH3_ADC"},
+	{"CH4_ASI_EN", "Switch", "CH4_ADC"},
+
+	{"CH1_ASI_EN", "Switch", "CH1_DIG"},
+	{"CH2_ASI_EN", "Switch", "CH2_DIG"},
+	{"CH3_ASI_EN", "Switch", "CH3_DIG"},
+	{"CH4_ASI_EN", "Switch", "CH4_DIG"},
+	{"CH5_ASI_EN", "Switch", "CH5_DIG"},
+	{"CH6_ASI_EN", "Switch", "CH6_DIG"},
+	{"CH7_ASI_EN", "Switch", "CH7_DIG"},
+	{"CH8_ASI_EN", "Switch", "CH8_DIG"},
+
+	{"CH5_ASI_EN", "Switch", "CH5_OUT"},
+	{"CH6_ASI_EN", "Switch", "CH6_OUT"},
+	{"CH7_ASI_EN", "Switch", "CH7_OUT"},
+	{"CH8_ASI_EN", "Switch", "CH8_OUT"},
+
+	{"Decimation Filter", "Linear Phase", "DRE_ENABLE"},
+	{"Decimation Filter", "Low Latency", "DRE_ENABLE"},
+	{"Decimation Filter", "Ultra-low Latency", "DRE_ENABLE"},
+
+	{"DRE_ENABLE", "Switch", "CH1_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH2_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH3_DRE_EN"},
+	{"DRE_ENABLE", "Switch", "CH4_DRE_EN"},
+
+	{"CH1_DRE_EN", "Switch", "CH1_ADC"},
+	{"CH2_DRE_EN", "Switch", "CH2_ADC"},
+	{"CH3_DRE_EN", "Switch", "CH3_ADC"},
+	{"CH4_DRE_EN", "Switch", "CH4_ADC"},
+
+	/* Mic input */
+	{"CH1_ADC", NULL, "MIC_GAIN_CTL_CH1"},
+	{"CH2_ADC", NULL, "MIC_GAIN_CTL_CH2"},
+	{"CH3_ADC", NULL, "MIC_GAIN_CTL_CH3"},
+	{"CH4_ADC", NULL, "MIC_GAIN_CTL_CH4"},
+
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1P Input Mux"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1M Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2P Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2M Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3P Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3M Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4P Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"},
+
+	{"PDM Clk Div Select", "2.8224 MHz", "MIC1P Input Mux"},
+	{"PDM Clk Div Select", "1.4112 MHz", "MIC1P Input Mux"},
+	{"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"},
+	{"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"},
+
+	{"MIC1P Input Mux", NULL, "CH1_DIG"},
+	{"MIC1M Input Mux", NULL, "CH2_DIG"},
+	{"MIC2P Input Mux", NULL, "CH3_DIG"},
+	{"MIC2M Input Mux", NULL, "CH4_DIG"},
+	{"MIC3P Input Mux", NULL, "CH5_DIG"},
+	{"MIC3M Input Mux", NULL, "CH6_DIG"},
+	{"MIC4P Input Mux", NULL, "CH7_DIG"},
+	{"MIC4M Input Mux", NULL, "CH8_DIG"},
+
+	{"MIC1 Analog Mux", "Line In", "MIC1P"},
+	{"MIC2 Analog Mux", "Line In", "MIC2P"},
+	{"MIC3 Analog Mux", "Line In", "MIC3P"},
+	{"MIC4 Analog Mux", "Line In", "MIC4P"},
+
+	{"MIC1P Input Mux", "Analog", "MIC1P"},
+	{"MIC1M Input Mux", "Analog", "MIC1M"},
+	{"MIC2P Input Mux", "Analog", "MIC2P"},
+	{"MIC2M Input Mux", "Analog", "MIC2M"},
+	{"MIC3P Input Mux", "Analog", "MIC3P"},
+	{"MIC3M Input Mux", "Analog", "MIC3M"},
+	{"MIC4P Input Mux", "Analog", "MIC4P"},
+	{"MIC4M Input Mux", "Analog", "MIC4M"},
+
+	{"MIC1P Input Mux", "Digital", "MIC1P"},
+	{"MIC1M Input Mux", "Digital", "MIC1M"},
+	{"MIC2P Input Mux", "Digital", "MIC2P"},
+	{"MIC2M Input Mux", "Digital", "MIC2M"},
+	{"MIC3P Input Mux", "Digital", "MIC3P"},
+	{"MIC3M Input Mux", "Digital", "MIC3M"},
+	{"MIC4P Input Mux", "Digital", "MIC4P"},
+	{"MIC4M Input Mux", "Digital", "MIC4M"},
+};
+
+#define ADCX140_PHASE_CALIB_SWITCH(xname) {\
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.info = adcx140_phase_calib_info, \
+	.get = adcx140_phase_calib_get, \
+	.put = adcx140_phase_calib_put}
+
+static int adcx140_phase_calib_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int adcx140_phase_calib_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *value)
+{
+	struct snd_soc_component *codec =
+		snd_soc_kcontrol_component(kcontrol);
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(codec);
+
+	value->value.integer.value[0] = adcx140->phase_calib_on ? 1 : 0;
+
+
+	return 0;
+}
+
+static int adcx140_phase_calib_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *value)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(kcontrol);
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(codec);
+
+	bool v = value->value.integer.value[0] ? true : false;
+
+	if (adcx140->phase_calib_on != v) {
+		adcx140->phase_calib_on = v;
+		return 1;
+	}
+	return 0;
+}
+
+static const struct snd_kcontrol_new adcx140_snd_controls[] = {
+	SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH2_CFG1, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH3_CFG1, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH4_CFG1, 2, 42, 0,
+			adc_tlv),
+
+	SOC_SINGLE_TLV("DRE Threshold", ADCX140_DRE_CFG0, 4, 9, 0,
+		       dre_thresh_tlv),
+	SOC_SINGLE_TLV("DRE Max Gain", ADCX140_DRE_CFG0, 0, 12, 0,
+		       dre_gain_tlv),
+
+	SOC_SINGLE_TLV("AGC Threshold", ADCX140_AGC_CFG0, 4, 15, 0,
+		       agc_thresh_tlv),
+	SOC_SINGLE_TLV("AGC Max Gain", ADCX140_AGC_CFG0, 0, 13, 0,
+		       agc_gain_tlv),
+
+	SOC_SINGLE_TLV("Digital CH1 Out Volume", ADCX140_CH1_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH2 Out Volume", ADCX140_CH2_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH3 Out Volume", ADCX140_CH3_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH4 Out Volume", ADCX140_CH4_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH5 Out Volume", ADCX140_CH5_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH6 Out Volume", ADCX140_CH6_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH7 Out Volume", ADCX140_CH7_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	ADCX140_PHASE_CALIB_SWITCH("Phase Calibration Switch"),
+};
+
+static int adcx140_reset(struct adcx140_priv *adcx140)
+{
+	int ret = 0;
+
+	if (adcx140->gpio_reset) {
+		gpiod_direction_output(adcx140->gpio_reset, 0);
+		/* 8.4.1: wait for hw shutdown (25ms) + >= 1ms */
+		usleep_range(30000, 100000);
+		gpiod_direction_output(adcx140->gpio_reset, 1);
+	} else {
+		ret = regmap_write(adcx140->regmap, ADCX140_SW_RESET,
+				   ADCX140_RESET);
+	}
+
+	/* 8.4.2: wait >= 10 ms after entering sleep mode. */
+	usleep_range(10000, 100000);
+
+	return ret;
+}
+
+static void adcx140_pwr_ctrl(struct adcx140_priv *adcx140, bool power_state)
+{
+	int pwr_ctrl = 0;
+	int ret = 0;
+	struct snd_soc_component *component = adcx140->component;
+
+	if (power_state)
+		pwr_ctrl = ADCX140_PWR_CFG_ADC_PDZ | ADCX140_PWR_CFG_PLL_PDZ;
+
+	if (adcx140->micbias_vg && power_state)
+		pwr_ctrl |= ADCX140_PWR_CFG_BIAS_PDZ;
+
+	if (pwr_ctrl) {
+		ret = regmap_write(adcx140->regmap, ADCX140_PHASE_CALIB,
+			adcx140->phase_calib_on ? 0x00 : 0x40);
+		if (ret)
+			dev_err(component->dev, "%s: register write error %d\n",
+				__func__, ret);
+	}
+
+	regmap_update_bits(adcx140->regmap, ADCX140_PWR_CFG,
+			   ADCX140_PWR_CTRL_MSK, pwr_ctrl);
+}
+
+static int adcx140_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	u8 data = 0;
+
+	switch (params_width(params)) {
+	case 16:
+		data = ADCX140_16_BIT_WORD;
+		break;
+	case 20:
+		data = ADCX140_20_BIT_WORD;
+		break;
+	case 24:
+		data = ADCX140_24_BIT_WORD;
+		break;
+	case 32:
+		data = ADCX140_32_BIT_WORD;
+		break;
+	default:
+		dev_err(component->dev, "%s: Unsupported width %d\n",
+			__func__, params_width(params));
+		return -EINVAL;
+	}
+
+	adcx140_pwr_ctrl(adcx140, false);
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+			    ADCX140_WORD_LEN_MSK, data);
+
+	adcx140_pwr_ctrl(adcx140, true);
+
+	return 0;
+}
+
+static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int fmt)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	u8 iface_reg1 = 0;
+	u8 iface_reg2 = 0;
+	int offset = 0;
+	bool inverted_bclk = false;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_CBP_CFP:
+		iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBC_CFC:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI clock provider\n");
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface_reg1 |= ADCX140_I2S_MODE_BIT;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface_reg1 |= ADCX140_LEFT_JUST_BIT;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		offset = 1;
+		inverted_bclk = true;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		inverted_bclk = true;
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI interface format\n");
+		return -EINVAL;
+	}
+
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+	case SND_SOC_DAIFMT_IB_IF:
+		inverted_bclk = !inverted_bclk;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface_reg1 |= ADCX140_FSYNCINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
+	if (inverted_bclk)
+		iface_reg1 |= ADCX140_BCLKINV_BIT;
+
+	adcx140->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+	adcx140_pwr_ctrl(adcx140, false);
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+				      ADCX140_FSYNCINV_BIT |
+				      ADCX140_BCLKINV_BIT |
+				      ADCX140_ASI_FORMAT_MSK,
+				      iface_reg1);
+	snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
+				      ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
+
+	/* Configure data offset */
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG1,
+				      ADCX140_TX_OFFSET_MASK, offset);
+
+	adcx140_pwr_ctrl(adcx140, true);
+
+	return 0;
+}
+
+static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
+				  unsigned int tx_mask, unsigned int rx_mask,
+				  int slots, int slot_width)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+
+	/*
+	 * The chip itself supports arbitrary masks, but the driver currently
+	 * only supports adjacent slots beginning at the first slot.
+	 */
+	if (tx_mask != GENMASK(__fls(tx_mask), 0)) {
+		dev_err(component->dev, "Only lower adjacent slots are supported\n");
+		return -EINVAL;
+	}
+
+	switch (slot_width) {
+	case 16:
+	case 20:
+	case 24:
+	case 32:
+		break;
+	default:
+		dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
+		return -EINVAL;
+	}
+
+	adcx140->slot_width = slot_width;
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops adcx140_dai_ops = {
+	.hw_params	= adcx140_hw_params,
+	.set_fmt	= adcx140_set_dai_fmt,
+	.set_tdm_slot	= adcx140_set_dai_tdm_slot,
+};
+
+static int adcx140_configure_gpo(struct adcx140_priv *adcx140)
+{
+	u32 gpo_outputs[ADCX140_NUM_GPOS];
+	u32 gpo_output_val = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < ADCX140_NUM_GPOS; i++) {
+		ret = device_property_read_u32_array(adcx140->dev,
+						     gpo_config_names[i],
+						     gpo_outputs,
+						     ADCX140_NUM_GPO_CFGS);
+		if (ret)
+			continue;
+
+		if (gpo_outputs[0] > ADCX140_GPO_CFG_MAX) {
+			dev_err(adcx140->dev, "GPO%d config out of range\n", i + 1);
+			return -EINVAL;
+		}
+
+		if (gpo_outputs[1] > ADCX140_GPO_DRV_MAX) {
+			dev_err(adcx140->dev, "GPO%d drive out of range\n", i + 1);
+			return -EINVAL;
+		}
+
+		gpo_output_val = gpo_outputs[0] << ADCX140_GPO_SHIFT |
+				 gpo_outputs[1];
+		ret = regmap_write(adcx140->regmap, ADCX140_GPO_CFG0 + i,
+				   gpo_output_val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+
+}
+
+static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
+{
+	int gpio_count = 0;
+	u32 gpio_outputs[ADCX140_NUM_GPIO_CFGS];
+	u32 gpio_output_val = 0;
+	int ret;
+
+	gpio_count = device_property_count_u32(adcx140->dev,
+			"ti,gpio-config");
+	if (gpio_count == 0)
+		return 0;
+
+	if (gpio_count != ADCX140_NUM_GPIO_CFGS)
+		return -EINVAL;
+
+	ret = device_property_read_u32_array(adcx140->dev, "ti,gpio-config",
+			gpio_outputs, gpio_count);
+	if (ret)
+		return ret;
+
+	if (gpio_outputs[0] > ADCX140_GPIO_CFG_MAX) {
+		dev_err(adcx140->dev, "GPIO config out of range\n");
+		return -EINVAL;
+	}
+
+	if (gpio_outputs[1] > ADCX140_GPIO_DRV_MAX) {
+		dev_err(adcx140->dev, "GPIO drive out of range\n");
+		return -EINVAL;
+	}
+
+	gpio_output_val = gpio_outputs[0] << ADCX140_GPIO_SHIFT
+		| gpio_outputs[1];
+
+	return regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0, gpio_output_val);
+}
+
+static int adcx140_codec_probe(struct snd_soc_component *component)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int sleep_cfg_val = ADCX140_WAKE_DEV;
+	u32 bias_source;
+	u32 vref_source;
+	u8 bias_cfg;
+	int pdm_count;
+	u32 pdm_edges[ADCX140_NUM_PDM_EDGES];
+	u32 pdm_edge_val = 0;
+	int gpi_count;
+	u32 gpi_inputs[ADCX140_NUM_GPI_PINS];
+	u32 gpi_input_val = 0;
+	int i;
+	int ret;
+	bool tx_high_z;
+
+	ret = device_property_read_u32(adcx140->dev, "ti,mic-bias-source",
+				      &bias_source);
+	if (ret || bias_source > ADCX140_MIC_BIAS_VAL_AVDD) {
+		bias_source = ADCX140_MIC_BIAS_VAL_VREF;
+		adcx140->micbias_vg = false;
+	} else {
+		adcx140->micbias_vg = true;
+	}
+
+	ret = device_property_read_u32(adcx140->dev, "ti,vref-source",
+				      &vref_source);
+	if (ret)
+		vref_source = ADCX140_MIC_BIAS_VREF_275V;
+
+	if (vref_source > ADCX140_MIC_BIAS_VREF_1375V) {
+		dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
+		return -EINVAL;
+	}
+
+	bias_cfg = bias_source << ADCX140_MIC_BIAS_SHIFT | vref_source;
+
+	ret = adcx140_reset(adcx140);
+	if (ret)
+		goto out;
+
+	if (adcx140->supply_areg == NULL)
+		sleep_cfg_val |= ADCX140_AREG_INTERNAL;
+
+	ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val);
+	if (ret) {
+		dev_err(adcx140->dev, "setting sleep config failed %d\n", ret);
+		goto out;
+	}
+
+	/* 8.4.3: Wait >= 1ms after entering active mode. */
+	usleep_range(1000, 100000);
+
+	pdm_count = device_property_count_u32(adcx140->dev,
+					      "ti,pdm-edge-select");
+	if (pdm_count <= ADCX140_NUM_PDM_EDGES && pdm_count > 0) {
+		ret = device_property_read_u32_array(adcx140->dev,
+						     "ti,pdm-edge-select",
+						     pdm_edges, pdm_count);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < pdm_count; i++)
+			pdm_edge_val |= pdm_edges[i] << (ADCX140_PDM_EDGE_SHIFT - i);
+
+		ret = regmap_write(adcx140->regmap, ADCX140_PDM_CFG,
+				   pdm_edge_val);
+		if (ret)
+			return ret;
+	}
+
+	gpi_count = device_property_count_u32(adcx140->dev, "ti,gpi-config");
+	if (gpi_count <= ADCX140_NUM_GPI_PINS && gpi_count > 0) {
+		ret = device_property_read_u32_array(adcx140->dev,
+						     "ti,gpi-config",
+						     gpi_inputs, gpi_count);
+		if (ret)
+			return ret;
+
+		gpi_input_val = gpi_inputs[ADCX140_GPI1_INDEX] << ADCX140_GPI_SHIFT |
+				gpi_inputs[ADCX140_GPI2_INDEX];
+
+		ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG0,
+				   gpi_input_val);
+		if (ret)
+			return ret;
+
+		gpi_input_val = gpi_inputs[ADCX140_GPI3_INDEX] << ADCX140_GPI_SHIFT |
+				gpi_inputs[ADCX140_GPI4_INDEX];
+
+		ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG1,
+				   gpi_input_val);
+		if (ret)
+			return ret;
+	}
+
+	ret = adcx140_configure_gpio(adcx140);
+	if (ret)
+		return ret;
+
+	ret = adcx140_configure_gpo(adcx140);
+	if (ret)
+		goto out;
+
+	ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG,
+				ADCX140_MIC_BIAS_VAL_MSK |
+				ADCX140_MIC_BIAS_VREF_MSK, bias_cfg);
+	if (ret)
+		dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret);
+
+	tx_high_z = device_property_read_bool(adcx140->dev, "ti,asi-tx-drive");
+	if (tx_high_z) {
+		ret = regmap_update_bits(adcx140->regmap, ADCX140_ASI_CFG0,
+				 ADCX140_TX_FILL, ADCX140_TX_FILL);
+		if (ret) {
+			dev_err(adcx140->dev, "Setting Tx drive failed %d\n", ret);
+			goto out;
+		}
+	}
+
+	adcx140_pwr_ctrl(adcx140, true);
+out:
+	return ret;
+}
+
+static int adcx140_set_bias_level(struct snd_soc_component *component,
+				  enum snd_soc_bias_level level)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		adcx140_pwr_ctrl(adcx140, true);
+		break;
+	case SND_SOC_BIAS_OFF:
+		adcx140_pwr_ctrl(adcx140, false);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver soc_codec_driver_adcx140 = {
+	.probe			= adcx140_codec_probe,
+	.set_bias_level		= adcx140_set_bias_level,
+	.controls		= adcx140_snd_controls,
+	.num_controls		= ARRAY_SIZE(adcx140_snd_controls),
+	.dapm_widgets		= adcx140_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(adcx140_dapm_widgets),
+	.dapm_routes		= adcx140_audio_map,
+	.num_dapm_routes	= ARRAY_SIZE(adcx140_audio_map),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 0,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static struct snd_soc_dai_driver adcx140_dai_driver[] = {
+	{
+		.name = "tlv320adcx140-codec",
+		.capture = {
+			.stream_name	 = "Capture",
+			.channels_min	 = 2,
+			.channels_max	 = ADCX140_MAX_CHANNELS,
+			.rates		 = ADCX140_RATES,
+			.formats	 = ADCX140_FORMATS,
+		},
+		.ops = &adcx140_dai_ops,
+		.symmetric_rate = 1,
+	}
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id tlv320adcx140_of_match[] = {
+	{ .compatible = "ti,tlv320adc3140" },
+	{ .compatible = "ti,tlv320adc5140" },
+	{ .compatible = "ti,tlv320adc6140" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tlv320adcx140_of_match);
+#endif
+
+static void adcx140_disable_regulator(void *arg)
+{
+	struct adcx140_priv *adcx140 = arg;
+
+	regulator_disable(adcx140->supply_areg);
+}
+
+static int adcx140_i2c_probe(struct i2c_client *i2c)
+{
+	struct adcx140_priv *adcx140;
+	int ret;
+
+	adcx140 = devm_kzalloc(&i2c->dev, sizeof(*adcx140), GFP_KERNEL);
+	if (!adcx140)
+		return -ENOMEM;
+
+	adcx140->phase_calib_on = false;
+	adcx140->dev = &i2c->dev;
+
+	adcx140->gpio_reset = devm_gpiod_get_optional(adcx140->dev,
+						      "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(adcx140->gpio_reset))
+		dev_info(&i2c->dev, "Reset GPIO not defined\n");
+
+	adcx140->supply_areg = devm_regulator_get_optional(adcx140->dev,
+							   "areg");
+	if (IS_ERR(adcx140->supply_areg)) {
+		if (PTR_ERR(adcx140->supply_areg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		adcx140->supply_areg = NULL;
+	} else {
+		ret = regulator_enable(adcx140->supply_areg);
+		if (ret) {
+			dev_err(adcx140->dev, "Failed to enable areg\n");
+			return ret;
+		}
+
+		ret = devm_add_action_or_reset(&i2c->dev, adcx140_disable_regulator, adcx140);
+		if (ret)
+			return ret;
+	}
+
+	adcx140->regmap = devm_regmap_init_i2c(i2c, &adcx140_i2c_regmap);
+	if (IS_ERR(adcx140->regmap)) {
+		ret = PTR_ERR(adcx140->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(i2c, adcx140);
+
+	return devm_snd_soc_register_component(&i2c->dev,
+					       &soc_codec_driver_adcx140,
+					       adcx140_dai_driver, 1);
+}
+
+static const struct i2c_device_id adcx140_i2c_id[] = {
+	{ "tlv320adc3140", 0 },
+	{ "tlv320adc5140", 1 },
+	{ "tlv320adc6140", 2 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adcx140_i2c_id);
+
+static struct i2c_driver adcx140_i2c_driver = {
+	.driver = {
+		.name	= "tlv320adcx140-codec",
+		.of_match_table = of_match_ptr(tlv320adcx140_of_match),
+	},
+	.probe_new	= adcx140_i2c_probe,
+	.id_table	= adcx140_i2c_id,
+};
+module_i2c_driver(adcx140_i2c_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver");
+MODULE_LICENSE("GPL v2");