Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 566 insertions, 0 deletions

diff --git a/sound/soc/intel/boards/kbl_rt5660.c b/sound/soc/intel/boards/kbl_rt5660.c
new file mode 100644
index 000000000..2c7a547f6
--- /dev/null
+++ b/sound/soc/intel/boards/kbl_rt5660.c
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright(c) 2018-19 Canonical Corporation.
+
+/*
+ * Intel Kabylake I2S Machine Driver with RT5660 Codec
+ *
+ * Modified from:
+ *   Intel Kabylake I2S Machine driver supporting MAXIM98357a and
+ *   DA7219 codecs
+ * Also referred to:
+ *   Intel Broadwell I2S Machine driver supporting RT5677 codec
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "../../codecs/hdac_hdmi.h"
+#include "../../codecs/rt5660.h"
+
+#define KBL_RT5660_CODEC_DAI "rt5660-aif1"
+#define DUAL_CHANNEL 2
+
+static struct snd_soc_card *kabylake_audio_card;
+static struct snd_soc_jack skylake_hdmi[3];
+static struct snd_soc_jack lineout_jack;
+static struct snd_soc_jack mic_jack;
+
+struct kbl_hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	int device;
+};
+
+struct kbl_codec_private {
+	struct gpio_desc *gpio_lo_mute;
+	struct list_head hdmi_pcm_list;
+};
+
+enum {
+	KBL_DPCM_AUDIO_PB = 0,
+	KBL_DPCM_AUDIO_CP,
+	KBL_DPCM_AUDIO_HDMI1_PB,
+	KBL_DPCM_AUDIO_HDMI2_PB,
+	KBL_DPCM_AUDIO_HDMI3_PB,
+};
+
+#define GPIO_LINEOUT_MUTE_INDEX 0
+#define GPIO_LINEOUT_DET_INDEX 3
+#define GPIO_LINEIN_DET_INDEX 4
+
+static const struct acpi_gpio_params lineout_mute_gpio = { GPIO_LINEOUT_MUTE_INDEX, 0, true };
+static const struct acpi_gpio_params lineout_det_gpio = { GPIO_LINEOUT_DET_INDEX, 0, false };
+static const struct acpi_gpio_params mic_det_gpio = { GPIO_LINEIN_DET_INDEX, 0, false };
+
+
+static const struct acpi_gpio_mapping acpi_rt5660_gpios[] = {
+	{ "lineout-mute-gpios", &lineout_mute_gpio, 1 },
+	{ "lineout-det-gpios", &lineout_det_gpio, 1 },
+	{ "mic-det-gpios", &mic_det_gpio, 1 },
+	{ NULL },
+};
+
+static struct snd_soc_jack_pin lineout_jack_pin = {
+	.pin	= "Line Out",
+	.mask	= SND_JACK_LINEOUT,
+};
+
+static struct snd_soc_jack_pin mic_jack_pin = {
+	.pin	= "Line In",
+	.mask	= SND_JACK_MICROPHONE,
+};
+
+static struct snd_soc_jack_gpio lineout_jack_gpio = {
+	.name			= "lineout-det",
+	.report			= SND_JACK_LINEOUT,
+	.debounce_time		= 200,
+};
+
+static struct snd_soc_jack_gpio mic_jack_gpio = {
+	.name			= "mic-det",
+	.report			= SND_JACK_MICROPHONE,
+	.debounce_time		= 200,
+};
+
+static int kabylake_5660_event_lineout(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct kbl_codec_private *priv = snd_soc_card_get_drvdata(dapm->card);
+
+	gpiod_set_value_cansleep(priv->gpio_lo_mute,
+			!(SND_SOC_DAPM_EVENT_ON(event)));
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new kabylake_rt5660_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Line In"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
+};
+
+static const struct snd_soc_dapm_widget kabylake_rt5660_widgets[] = {
+	SND_SOC_DAPM_MIC("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", kabylake_5660_event_lineout),
+};
+
+static const struct snd_soc_dapm_route kabylake_rt5660_map[] = {
+	/* other jacks */
+	{"IN1P", NULL, "Line In"},
+	{"IN2P", NULL, "Line In"},
+	{"Line Out", NULL, "LOUTR"},
+	{"Line Out", NULL, "LOUTL"},
+
+	/* CODEC BE connections */
+	{ "AIF1 Playback", NULL, "ssp0 Tx"},
+	{ "ssp0 Tx", NULL, "codec0_out"},
+
+	{ "codec0_in", NULL, "ssp0 Rx" },
+	{ "ssp0 Rx", NULL, "AIF1 Capture" },
+
+	{ "hifi1", NULL, "iDisp1 Tx"},
+	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+	{ "hifi2", NULL, "iDisp2 Tx"},
+	{ "iDisp2 Tx", NULL, "iDisp2_out"},
+	{ "hifi3", NULL, "iDisp3 Tx"},
+	{ "iDisp3 Tx", NULL, "iDisp3_out"},
+};
+
+static int kabylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *chan = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+
+	/* The ADSP will convert the FE rate to 48k, stereo */
+	rate->min = rate->max = 48000;
+	chan->min = chan->max = DUAL_CHANNEL;
+
+	/* set SSP0 to 24 bit */
+	snd_mask_none(fmt);
+	snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
+
+	return 0;
+}
+
+static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+	ret = devm_acpi_dev_add_driver_gpios(component->dev, acpi_rt5660_gpios);
+	if (ret)
+		dev_warn(component->dev, "Failed to add driver gpios\n");
+
+	/* Request rt5660 GPIO for lineout mute control, return if fails */
+	ctx->gpio_lo_mute = gpiod_get(component->dev, "lineout-mute",
+				      GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->gpio_lo_mute)) {
+		dev_err(component->dev, "Can't find GPIO_MUTE# gpio\n");
+		return PTR_ERR(ctx->gpio_lo_mute);
+	}
+
+	/* Create and initialize headphone jack, this jack is not mandatory, don't return if fails */
+	ret = snd_soc_card_jack_new_pins(rtd->card, "Lineout Jack",
+					 SND_JACK_LINEOUT, &lineout_jack,
+					 &lineout_jack_pin, 1);
+	if (ret)
+		dev_warn(component->dev, "Can't create Lineout jack\n");
+	else {
+		lineout_jack_gpio.gpiod_dev = component->dev;
+		ret = snd_soc_jack_add_gpios(&lineout_jack, 1,
+					     &lineout_jack_gpio);
+		if (ret)
+			dev_warn(component->dev, "Can't add Lineout jack gpio\n");
+	}
+
+	/* Create and initialize mic jack, this jack is not mandatory, don't return if fails */
+	ret = snd_soc_card_jack_new_pins(rtd->card, "Mic Jack",
+					 SND_JACK_MICROPHONE, &mic_jack,
+					 &mic_jack_pin, 1);
+	if (ret)
+		dev_warn(component->dev, "Can't create mic jack\n");
+	else {
+		mic_jack_gpio.gpiod_dev = component->dev;
+		ret = snd_soc_jack_add_gpios(&mic_jack, 1, &mic_jack_gpio);
+		if (ret)
+			dev_warn(component->dev, "Can't add mic jack gpio\n");
+	}
+
+	/* Here we enable some dapms in advance to reduce the pop noise for recording via line-in */
+	snd_soc_dapm_force_enable_pin(dapm, "MICBIAS1");
+	snd_soc_dapm_force_enable_pin(dapm, "BST1");
+	snd_soc_dapm_force_enable_pin(dapm, "BST2");
+
+	return 0;
+}
+
+static void kabylake_rt5660_codec_exit(struct snd_soc_pcm_runtime *rtd)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+
+	/*
+	 * The .exit() can be reached without going through the .init()
+	 * so explicitly test if the gpiod is valid
+	 */
+	if (!IS_ERR_OR_NULL(ctx->gpio_lo_mute))
+		gpiod_put(ctx->gpio_lo_mute);
+}
+
+static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0);
+	struct kbl_hdmi_pcm *pcm;
+
+	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	pcm->device = device;
+	pcm->codec_dai = dai;
+
+	list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
+
+	return 0;
+}
+
+static int kabylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI1_PB);
+}
+
+static int kabylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI2_PB);
+}
+
+static int kabylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI3_PB);
+}
+
+static int kabylake_rt5660_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai,
+				     RT5660_SCLK_S_PLL1, params_rate(params) * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_pll(codec_dai, 0,
+				  RT5660_PLL1_S_BCLK,
+				  params_rate(params) * 50,
+				  params_rate(params) * 512);
+	if (ret < 0)
+		dev_err(codec_dai->dev, "can't set codec pll: %d\n", ret);
+
+	return ret;
+}
+
+static struct snd_soc_ops kabylake_rt5660_ops = {
+	.hw_params = kabylake_rt5660_hw_params,
+};
+
+static const unsigned int rates[] = {
+	48000,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list  = rates,
+	.mask = 0,
+};
+
+static const unsigned int channels[] = {
+	DUAL_CHANNEL,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int kbl_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/*
+	 * On this platform for PCM device we support,
+	 * 48Khz
+	 * stereo
+	 * 16 bit audio
+	 */
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+					   &constraints_channels);
+
+	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
+
+	snd_pcm_hw_constraint_list(runtime, 0,
+				SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
+
+	return 0;
+}
+
+static const struct snd_soc_ops kabylake_rt5660_fe_ops = {
+	.startup = kbl_fe_startup,
+};
+
+SND_SOC_DAILINK_DEF(dummy,
+	DAILINK_COMP_ARRAY(COMP_DUMMY()));
+
+SND_SOC_DAILINK_DEF(system,
+	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
+
+SND_SOC_DAILINK_DEF(hdmi1,
+	DAILINK_COMP_ARRAY(COMP_CPU("HDMI1 Pin")));
+
+SND_SOC_DAILINK_DEF(hdmi2,
+	DAILINK_COMP_ARRAY(COMP_CPU("HDMI2 Pin")));
+
+SND_SOC_DAILINK_DEF(hdmi3,
+	DAILINK_COMP_ARRAY(COMP_CPU("HDMI3 Pin")));
+
+SND_SOC_DAILINK_DEF(ssp0_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("SSP0 Pin")));
+SND_SOC_DAILINK_DEF(ssp0_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC3277:00", KBL_RT5660_CODEC_DAI)));
+
+SND_SOC_DAILINK_DEF(idisp1_pin,
+		    DAILINK_COMP_ARRAY(COMP_CPU("iDisp1 Pin")));
+SND_SOC_DAILINK_DEF(idisp1_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi1")));
+
+SND_SOC_DAILINK_DEF(idisp2_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp2 Pin")));
+SND_SOC_DAILINK_DEF(idisp2_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi2")));
+
+SND_SOC_DAILINK_DEF(idisp3_pin,
+	DAILINK_COMP_ARRAY(COMP_CPU("iDisp3 Pin")));
+SND_SOC_DAILINK_DEF(idisp3_codec,
+	DAILINK_COMP_ARRAY(COMP_CODEC("ehdaudio0D2", "intel-hdmi-hifi3")));
+
+SND_SOC_DAILINK_DEF(platform,
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:1f.3")));
+
+/* kabylake digital audio interface glue - connects rt5660 codec <--> CPU */
+static struct snd_soc_dai_link kabylake_rt5660_dais[] = {
+	/* Front End DAI links */
+	[KBL_DPCM_AUDIO_PB] = {
+		.name = "Kbl Audio Port",
+		.stream_name = "Audio",
+		.dynamic = 1,
+		.nonatomic = 1,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_playback = 1,
+		.ops = &kabylake_rt5660_fe_ops,
+		SND_SOC_DAILINK_REG(system, dummy, platform),
+	},
+	[KBL_DPCM_AUDIO_CP] = {
+		.name = "Kbl Audio Capture Port",
+		.stream_name = "Audio Record",
+		.dynamic = 1,
+		.nonatomic = 1,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_capture = 1,
+		.ops = &kabylake_rt5660_fe_ops,
+		SND_SOC_DAILINK_REG(system, dummy, platform),
+	},
+	[KBL_DPCM_AUDIO_HDMI1_PB] = {
+		.name = "Kbl HDMI Port1",
+		.stream_name = "Hdmi1",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.nonatomic = 1,
+		.dynamic = 1,
+		SND_SOC_DAILINK_REG(hdmi1, dummy, platform),
+	},
+	[KBL_DPCM_AUDIO_HDMI2_PB] = {
+		.name = "Kbl HDMI Port2",
+		.stream_name = "Hdmi2",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.nonatomic = 1,
+		.dynamic = 1,
+		SND_SOC_DAILINK_REG(hdmi2, dummy, platform),
+	},
+	[KBL_DPCM_AUDIO_HDMI3_PB] = {
+		.name = "Kbl HDMI Port3",
+		.stream_name = "Hdmi3",
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_playback = 1,
+		.init = NULL,
+		.nonatomic = 1,
+		.dynamic = 1,
+		SND_SOC_DAILINK_REG(hdmi3, dummy, platform),
+	},
+
+	/* Back End DAI links */
+	{
+		/* SSP0 - Codec */
+		.name = "SSP0-Codec",
+		.id = 0,
+		.no_pcm = 1,
+		.init = kabylake_rt5660_codec_init,
+		.exit = kabylake_rt5660_codec_exit,
+		.dai_fmt = SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBC_CFC,
+		.ignore_pmdown_time = 1,
+		.be_hw_params_fixup = kabylake_ssp0_fixup,
+		.ops = &kabylake_rt5660_ops,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		SND_SOC_DAILINK_REG(ssp0_pin, ssp0_codec, platform),
+	},
+	{
+		.name = "iDisp1",
+		.id = 1,
+		.dpcm_playback = 1,
+		.init = kabylake_hdmi1_init,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp1_pin, idisp1_codec, platform),
+	},
+	{
+		.name = "iDisp2",
+		.id = 2,
+		.init = kabylake_hdmi2_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp2_pin, idisp2_codec, platform),
+	},
+	{
+		.name = "iDisp3",
+		.id = 3,
+		.init = kabylake_hdmi3_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+		SND_SOC_DAILINK_REG(idisp3_pin, idisp3_codec, platform),
+	},
+};
+
+
+#define NAME_SIZE	32
+static int kabylake_card_late_probe(struct snd_soc_card *card)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(card);
+	struct kbl_hdmi_pcm *pcm;
+	struct snd_soc_component *component = NULL;
+	int err, i = 0;
+	char jack_name[NAME_SIZE];
+
+	list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) {
+		component = pcm->codec_dai->component;
+		snprintf(jack_name, sizeof(jack_name),
+			"HDMI/DP, pcm=%d Jack", pcm->device);
+		err = snd_soc_card_jack_new(card, jack_name,
+					SND_JACK_AVOUT, &skylake_hdmi[i]);
+
+		if (err)
+			return err;
+
+		err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device,
+				&skylake_hdmi[i]);
+		if (err < 0)
+			return err;
+
+		i++;
+
+	}
+
+	if (!component)
+		return -EINVAL;
+
+	return hdac_hdmi_jack_port_init(component, &card->dapm);
+}
+
+/* kabylake audio machine driver for rt5660 */
+static struct snd_soc_card kabylake_audio_card_rt5660 = {
+	.name = "kblrt5660",
+	.owner = THIS_MODULE,
+	.dai_link = kabylake_rt5660_dais,
+	.num_links = ARRAY_SIZE(kabylake_rt5660_dais),
+	.controls = kabylake_rt5660_controls,
+	.num_controls = ARRAY_SIZE(kabylake_rt5660_controls),
+	.dapm_widgets = kabylake_rt5660_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(kabylake_rt5660_widgets),
+	.dapm_routes = kabylake_rt5660_map,
+	.num_dapm_routes = ARRAY_SIZE(kabylake_rt5660_map),
+	.fully_routed = true,
+	.late_probe = kabylake_card_late_probe,
+};
+
+static int kabylake_audio_probe(struct platform_device *pdev)
+{
+	struct kbl_codec_private *ctx;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
+
+	kabylake_audio_card =
+		(struct snd_soc_card *)pdev->id_entry->driver_data;
+
+	kabylake_audio_card->dev = &pdev->dev;
+	snd_soc_card_set_drvdata(kabylake_audio_card, ctx);
+	return devm_snd_soc_register_card(&pdev->dev, kabylake_audio_card);
+}
+
+static const struct platform_device_id kbl_board_ids[] = {
+	{
+		.name = "kbl_rt5660",
+		.driver_data =
+			(kernel_ulong_t)&kabylake_audio_card_rt5660,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, kbl_board_ids);
+
+static struct platform_driver kabylake_audio = {
+	.probe = kabylake_audio_probe,
+	.driver = {
+		.name = "kbl_rt5660",
+		.pm = &snd_soc_pm_ops,
+	},
+	.id_table = kbl_board_ids,
+};
+
+module_platform_driver(kabylake_audio)
+
+/* Module information */
+MODULE_DESCRIPTION("Audio Machine driver-RT5660 in I2S mode");
+MODULE_AUTHOR("Hui Wang <hui.wang@canonical.com>");
+MODULE_LICENSE("GPL v2");